- 03 2月, 2010 4 次提交
-
-
由 Ben Dooks 提交于
Add SERIAL_SAMSUNG_UARTS_4 to mop up the number of cases currently using four Samsung compatible UARTS. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Michel Pollet 提交于
The S3C2412 has a fractional baud rate register, this patch adds the corresponding flag to the UART definition to allow generation of more precise baud rates for the various clock combinations. Signed-off-by: NMichel Pollet <buserror@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Jassi Brar 提交于
The SPI controller platform devices should be compiled in independent of the driver support, otherwise we might end up with dev-spi built as kernel module. Change this to make every machine select if it has some SPI device and wants to build device definitions. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Add the required DMA masks to the hs-otg device definition to allow DMA to work with it. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 27 1月, 2010 2 次提交
-
-
由 Kukjin Kim 提交于
1. Moved common memory map definitions for S5P such as S5P_VA_XXX into plat-s5p/include/mach/map-s5p.h from mach-s5p6440/include/mach. 2. Removed unnecessary definitions in the map.h and irq.c 3. Removed the unnecessary support for unaligned UART address 4. Renamed S5P_VA_VICx definitions as VA_VICx 5. Moved the definitons of VIC_BASE to plat-s5p/include/plat/irqs.h Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Kukjin Kim 提交于
The s5p6440-clock.c and s5p6440-init.c code in the plat-s5p is specific to s5p6440 SoC based systems. So these files are being moved to the machine directory of s5p6440. And these files are renamed in the machine directory. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 26 1月, 2010 6 次提交
-
-
由 Ben Dooks 提交于
Merge branch 'next-smdk6410-defconfig' into next-samsung
-
由 Ben Dooks 提交于
Add an error print to s3c24xx_register_clocks to provide more useful information when failing to register the clock. I belive this was originally left out due to the possibility of a problem with low-level debugging code. However, if the low-level debug code is not functional by now there will be a whole other set of problems being presented to the system. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Add some kerneldoc documentation to the s3c24xx_register_clock and the s3c24xx_register_clocks() call. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Functions should be marked __init, not __initdata. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Maurus Cuelenaere 提交于
ARM: SAMSUNG: Fix null pointer dereference in ADC driver Use struct adc_device instead of relying on client (which could be NULL) when checking for SoC type. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
This patch adds UART serial port support for S5PV210. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 21 1月, 2010 12 次提交
-
-
由 Ben Dooks 提交于
Add the HSOTG and HSMMC block addresses to the map.h file. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Update the s3c6400_defconfig with one from the current kernel which has been build and run tested on an SMDK6410. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
The Samsung initrd for SMDK6410 is now bigger than the original initrds that where used. Increase the command-line size and the size of the ramdisk that it is unpacked into. Also change the default init to /linuxrc to avoid problems with the current SMDK ramdisk image failing to run /bin/bash. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
The s3c64xx_spi_set_info() sets one of two platform data structures depending on which controller is being specified. Change to taking a pointer to the relevant platform data structure and then having one set of code to place the data into the area being pointed to. Cc: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Maurus Cuelenaere 提交于
ARM: S3C64XX: Fix typo in s3c-hsotg platform data Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Mark Brown 提交于
They are not exported, they are referenced via vtables. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Mark Brown 提交于
It's not exported. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Mark Brown 提交于
As reported when the patch was posted commit 71269364 ("ARM: S3C64XX: Add I2S resources in platform code") uses pin names for the IISv4 data output pins which are not present in mainline, causing dev-audio to fail to build. Fix this by using the defines which are actually present in the kernel source. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Mark Brown 提交于
The WM835x driver won't actually use this yet but it will in the future when the changes converting it to genirq are merged. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the pm-check.c file to plat-samsung for all Samsung SoC users, and update Kconfig names to make them SAMSUNG_ instead of S3C2410_ Sed expresions used to make the change: s/S3C2410_PM_DEBUG/SAMSUNG_PM_DEBUG/g s/S3C2410_PM_CHECK/SAMSUNG_PM_CHECK/g Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the PWM driver support to plat-samsung, as these PWM blocks are close enough across the current range to be supported by this driver. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move header files which are not likely to be touched in any further support addition out of plat-s3c's include directory into plat-samsung. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 19 1月, 2010 16 次提交
-
-
由 Ben Dooks 提交于
Merge branch 'next-samsung-s5p6440-iodec' into next-samsung-try10
-
由 Ben Dooks 提交于
Start Documentation/arm/Samsung and add an initial overview file which whilst is not complete, is better than nothing. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Kukjin Kim 提交于
This patch adds the IO descriptor for ChipID block in S5P6440. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Rename mach-s3c2410/include/mach/gpio-core.h to mach/gpio-track.h so that it can be included by <plat/gpio-core.h> when needed. Eliminate all other empty gpio-core.h files and just include the <plat/gpio-core.h> as necessary. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the GPIO and GPIO configuration headers into arch/arm/plat-samsung as they are common to all the Samsung SoCs. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the gpio.c code containing the core gpiolib and GPIO support to plat-samsung from plat-s3c as it is used by all current Samsung SoCs. Note, we didn't move this to gpiolib.c as it contains code that is not strictly for gpiolib support and the 4bit code is already called gpiolib.c so make the change easier by not renaming both files in one go. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the pm-gpio code into plat-samsung. Note, this should be changed later to properly compile the 4bit code if the 4bit settings are enabled. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Kukjin Kim 提交于
This patch adds Samsung's S5P6440 GPIO support. Signed-off-by: NAdityapratap Sharma <aditya.ps@samsung.com> Signed-off-by: NAtul Dahiya <atul.dahiya@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Kukjin Kim 提交于
This patch moves GPIO common functions (from plat-s3c64xx) into plat-samsung. and adds the config option to build the plat-samsung/gpiolib for Samsung SoCs. Signed-off-by: NAdityapratap Sharma <aditya.ps@samsung.com> Signed-off-by: NAtul Dahiya <atul.dahiya@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Merge branch 'next-samsung-serial1' into next-samsung-try7
-
由 Ben Dooks 提交于
Merge branch 'next-samsung-clock2' into next-samsung-try7
-
由 Ben Dooks 提交于
Merge branch 'next-samsung-devupdates1' into next-samsung-try7
-
由 Ben Dooks 提交于
Merge branch 'next-jassi-spi' into next-samsung-try7
-
由 Thomas Abraham 提交于
This patch modifies s3c24xx_serial_initconsole function to accept multiple platform UART information structures. This is required on platforms that have differences among the instances of UART ports. As an example, the FIFO sizes could be different for each UART instance and hence multiple platform UART information structures would be needed. This patch also modifies the s3c24xx_console_init macro since it wraps the call to the s3c24xx_serial_initconsole function. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Merge branch 'next-samsung-clock2' into next-samsung-try5
-
由 Ben Dooks 提交于
Merge branch 'next-samsung-devupdates1' into next-samsung-try5
-