- 25 9月, 2010 3 次提交
-
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Dan Rosenberg 提交于
The SNDRV_HDSP_IOCTL_GET_CONFIG_INFO and SNDRV_HDSP_IOCTL_GET_CONFIG_INFO ioctls in hdspm.c and hdsp.c allow unprivileged users to read uninitialized kernel stack memory, because several fields of the hdsp{m}_config_info structs declared on the stack are not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: NDan Rosenberg <dan.j.rosenberg@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 9月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
The SPDIF in audio widget must be searched through the list as the widget that contains the given pin as the connection source. The current code was implemented in a reverse way. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 9月, 2010 1 次提交
-
-
由 Mark Brown 提交于
Spot the build testing. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 22 9月, 2010 2 次提交
-
-
由 Dimitris Papastamos 提交于
Make sure we stay within the cache boundaries when updating the register cache. Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Erik J. Staab 提交于
On the HT-Omega Claro halo card, the ADC data must be captured from the second I2S input. Using the default first input, which isn't connected to anything, would result in silence. Signed-off-by: NErik J. Staab <ejs@insightbb.com> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 9月, 2010 20 次提交
-
-
由 Luke Yelavich 提交于
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/643891 Set the Dell Latitude E6400 (1028:0233) SSID to use AD1984_DELL_DESKTOP Cc: stable@kernel.org Signed-off-by: NLuke Yelavich <luke.yelavich@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: vt6655: fix buffer overflow Revert: "Staging: batman-adv: Adding netfilter-bridge hooks"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: musb: MAINTAINERS: Fix my mail address USB: serial/mos*: prevent reading uninitialized stack memory USB: otg: twl4030: fix phy initialization(v1) USB: EHCI: Disable langwell/penwell LPM capability usb: musb_debugfs: don't use the struct file private_data field with seq_files
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: mfd: fix bug in serial_hsu_remove() serial: amba-pl010: fix set_ldisc
-
由 Dan Carpenter 提交于
"param->u.wpa_associate.wpa_ie_len" comes from the user. We should check it so that the copy_from_user() doesn't overflow the buffer. Also further down in the function, we assume that if "param->u.wpa_associate.wpa_ie_len" is set then "abyWPAIE[0]" is initialized. To make that work, I changed the test here to say that if "wpa_ie_len" is set then "wpa_ie" has to be a valid pointer or we return -EINVAL. Oddly, we only use the first element of the abyWPAIE[] array. So I suspect there may be some other issues in this function. Signed-off-by: NDan Carpenter <error27@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sven Eckelmann 提交于
This reverts commit 96d592ed. The netfilter hook seems to be misused and may leak skbs in situations when NF_HOOK returns NF_STOLEN. It may not filter everything as expected. Also the ethernet bridge tables are not yet capable to understand batman-adv packet correctly. It was only added for testing purposes and can be removed again. Reported-by: NVasiliy Kulikov <segooon@gmail.com> Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Feng Tang 提交于
Medfield HSU driver deal with 4 pci devices(3 uart ports + 1 dma controller), so in pci remove func, we need handle them differently Signed-off-by: NFeng Tang <feng.tang@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mika Westerberg 提交于
Commit d87d9b7d ("tty: serial - fix tty referencing in set_ldisc") changed set_ldisc to take ldisc number as parameter. This patch fixes AMBA PL010 driver according the new prototype. Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi> Cc: Alan Cox <alan@linux.intel.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Felipe Balbi 提交于
If we don't, contributors to musb and any USB OMAP code will be sending mails to an unexistent inbox. Signed-off-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Rosenberg 提交于
The TIOCGICOUNT device ioctl in both mos7720.c and mos7840.c allows unprivileged users to read uninitialized stack memory, because the "reserved" member of the serial_icounter_struct struct declared on the stack is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: NDan Rosenberg <dan.j.rosenberg@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ming Lei 提交于
Commit 461c3177(into 2.6.36-v3) is put forward to power down phy if no usb cable is connected, but does introduce the two issues below: 1), phy is not into work state if usb cable is connected with PC during poweron, so musb device mode is not usable in such case, follows the reasons: -twl4030_phy_resume is not called, so regulators are not enabled i2c access are not enabled usb mode not configurated 2), The kernel warings[1] of regulators 'unbalanced disables' is caused if poweron without usb cable connected with PC or b-device. This patch fixes the two issues above: -power down phy only if no usb cable is connected with PC and b-device -do phy initialization(via __twl4030_phy_resume) if usb cable is connected with PC(vbus event) or another b-device(ID event) in twl4030_usb_probe. This patch also doesn't put VUSB3V1 LDO into active mode in twl4030_usb_ldo_init until VBUS/ID change detected, so we can save more power consumption than before. This patch is verified OK on Beagle board either connected with usb cable or not when poweron. [1]. warnings of 'unbalanced disables' of regulators. [root@OMAP3EVM /]# dmesg ------------[ cut here ]------------ WARNING: at drivers/regulator/core.c:1357 _regulator_disable+0x38/0x128() unbalanced disables for VUSB1V8 Modules linked in: Backtrace: [<c0030c48>] (dump_backtrace+0x0/0x110) from [<c034f5a8>] (dump_stack+0x18/0x1c) r7:c78179d8 r6:c01ed6b8 r5:c0410822 r4:0000054d [<c034f590>] (dump_stack+0x0/0x1c) from [<c0057da8>] (warn_slowpath_common+0x54/0x6c) [<c0057d54>] (warn_slowpath_common+0x0/0x6c) from [<c0057e64>] (warn_slowpath_fmt+0x38/0x40) r9:00000000 r8:00000000 r7:c78e6608 r6:00000000 r5:fffffffb r4:c78e6c00 [<c0057e2c>] (warn_slowpath_fmt+0x0/0x40) from [<c01ed6b8>] (_regulator_disable+0x38/0x128) r3:c0410e53 r2:c0410ad5 [<c01ed680>] (_regulator_disable+0x0/0x128) from [<c01ed87c>] (regulator_disable+0x24/0x38) r7:c78e6608 r6:00000000 r5:c78e6c40 r4:c78e6c00 [<c01ed858>] (regulator_disable+0x0/0x38) from [<c02382dc>] (twl4030_phy_power+0x15c/0x17c) r5:c78595c0 r4:00000000 [<c0238180>] (twl4030_phy_power+0x0/0x17c) from [<c023831c>] (twl4030_phy_suspend+0x20/0x2c) r6:00000000 r5:c78595c0 r4:c78595c0 [<c02382fc>] (twl4030_phy_suspend+0x0/0x2c) from [<c0238638>] (twl4030_usb_irq+0x11c/0x16c) r5:c78595c0 r4:00000040 [<c023851c>] (twl4030_usb_irq+0x0/0x16c) from [<c034ec18>] (twl4030_usb_probe+0x2c4/0x32c) r6:00000000 r5:00000000 r4:c78595c0 [<c034e954>] (twl4030_usb_probe+0x0/0x32c) from [<c02152a0>] (platform_drv_probe+0x20/0x24) r7:00000000 r6:c047d49c r5:c78e6608 r4:c047d49c [<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190) [<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48) r7:00000000 r6:c78e6608 r5:c78e6608 r4:c047d49c [<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90) r5:c0214390 r4:00000000 [<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94) r6:c78e663c r5:c78e6608 r4:c78e6608 [<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48) r7:00000000 r6:00000002 r5:c78e6608 r4:c78e6600 [<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4) [<c0211b08>] (device_add+0x0/0x4b4) from [<c021597c>] (platform_device_add+0x110/0x16c) [<c021586c>] (platform_device_add+0x0/0x16c) from [<c0220cb0>] (add_numbered_child+0xd8/0x118) r7:00000000 r6:c045f15c r5:c78e6600 r4:00000000 [<c0220bd8>] (add_numbered_child+0x0/0x118) from [<c001c618>] (twl_probe+0x3a4/0x72c) [<c001c274>] (twl_probe+0x0/0x72c) from [<c02601ac>] (i2c_device_probe+0x7c/0xa4) [<c0260130>] (i2c_device_probe+0x0/0xa4) from [<c0214244>] (driver_probe_device+0xd0/0x190) r5:c7856e20 r4:c047c860 [<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48) r7:c7856e04 r6:c7856e20 r5:c7856e20 r4:c047c860 [<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90) r5:c0214390 r4:00000000 [<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94) r6:c7856e54 r5:c7856e20 r4:c7856e20 [<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48) r7:c7856e04 r6:c78fd048 r5:c7856e20 r4:c7856e20 [<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4) [<c0211b08>] (device_add+0x0/0x4b4) from [<c0211fd8>] (device_register+0x1c/0x20) [<c0211fbc>] (device_register+0x0/0x20) from [<c0260aa8>] (i2c_new_device+0xec/0x150) r5:c7856e00 r4:c7856e20 [<c02609bc>] (i2c_new_device+0x0/0x150) from [<c0260dc0>] (i2c_register_adapter+0xa0/0x1c4) r7:00000000 r6:c78fd078 r5:c78fd048 r4:c781d5c0 [<c0260d20>] (i2c_register_adapter+0x0/0x1c4) from [<c0260f80>] (i2c_add_numbered_adapter+0x9c/0xb4) r7:00000a28 r6:c04600a8 r5:c78fd048 r4:00000000 [<c0260ee4>] (i2c_add_numbered_adapter+0x0/0xb4) from [<c034efa4>] (omap_i2c_probe+0x324/0x3e8) r5:00000000 r4:c78fd000 [<c034ec80>] (omap_i2c_probe+0x0/0x3e8) from [<c02152a0>] (platform_drv_probe+0x20/0x24) [<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190) [<c0214174>] (driver_probe_device+0x0/0x190) from [<c021436c>] (__driver_attach+0x68/0x8c) r7:c78b2140 r6:c047e214 r5:c04600e4 r4:c04600b0 [<c0214304>] (__driver_attach+0x0/0x8c) from [<c021399c>] (bus_for_each_dev+0x50/0x84) r7:c78b2140 r6:c047e214 r5:c0214304 r4:00000000 [<c021394c>] (bus_for_each_dev+0x0/0x84) from [<c0214068>] (driver_attach+0x20/0x28) r6:c047e214 r5:c047e214 r4:c00270d0 [<c0214048>] (driver_attach+0x0/0x28) from [<c0213274>] (bus_add_driver+0xa8/0x228) [<c02131cc>] (bus_add_driver+0x0/0x228) from [<c02146a4>] (driver_register+0xb0/0x13c) [<c02145f4>] (driver_register+0x0/0x13c) from [<c0215744>] (platform_driver_register+0x4c/0x60) r9:00000000 r8:c001f688 r7:00000013 r6:c005b6fc r5:c00083dc r4:c00270d0 [<c02156f8>] (platform_driver_register+0x0/0x60) from [<c001f69c>] (omap_i2c_init_driver+0x14/0x1c) [<c001f688>] (omap_i2c_init_driver+0x0/0x1c) from [<c002c460>] (do_one_initcall+0xd0/0x1a4) [<c002c390>] (do_one_initcall+0x0/0x1a4) from [<c0008478>] (kernel_init+0x9c/0x154) [<c00083dc>] (kernel_init+0x0/0x154) from [<c005b6fc>] (do_exit+0x0/0x688) r5:c00083dc r4:00000000 ---[ end trace 1b75b31a2719ed1d ]--- Signed-off-by: NMing Lei <tom.leiming@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <me@felipebalbi.com> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alek Du 提交于
We have to do so due to HW limitation. Signed-off-by: NAlek Du <alek.du@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mathias Nyman 提交于
seq_files use the private_data field of a file struct for storing a seq_file structure, data should be stored in seq_file's own private field (e.g. file->private_data->private) Otherwise seq_release() will free the private data when the file is closed. Signed-off-by: NMathias Nyman <mathias.nyman@nokia.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Al Viro 提交于
We need to make sure that only the first do_signal() to be handled on the way out syscall will bother with syscall restarts; additionally, the check on the "signal has user handler" path had been wrong - compare with restart prevention in sigreturn()... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
do_signal() should place the syscall number in gr7, not gr8 when handling ERESTART_WOULDBLOCK. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Use force_sigsegv() rather than force_sig(SIGSEGV, ...) as the former resets the SEGV handler pointer which will kill the process, rather than leaving it open to an infinite loop if the SEGV handler itself caused a SEGV signal. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
a) sa_handler might be maliciously set to point to kernel memory; blindly dereferencing it in FDPIC case is a Bad Idea(tm). b) I'm not sure you need that set_fs(USER_DS) there at all, but if you do, you'd better do it *before* checking the frame you've decided to use with access_ok(), lest sigaltstack() becomes a convenient roothole. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Reset restart_block.fn on executing a sigreturn such that any currently pending system call restarts will be forced to return -EINTR. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Commit 4969c119 ("mm: fix swapin race condition") is now agreed to be incomplete. There's a race, not very much less likely than the original race envisaged, in which it is further necessary to check that the swapcache page's swap has not changed. Here's the reasoning: cast in terms of reuse_swap_page(), but probably could be reformulated to rely on try_to_free_swap() instead, or on swapoff+swapon. A, faults into do_swap_page(): does page1 = lookup_swap_cache(swap1) and comes through the lock_page(page1). B, a racing thread of the same process, faults on the same address: does page1 = lookup_swap_cache(swap1) and now waits in lock_page(page1), but for whatever reason is unlucky not to get the lock any time soon. A carries on through do_swap_page(), a write fault, but cannot reuse the swap page1 (another reference to swap1). Unlocks the page1 (but B doesn't get it yet), does COW in do_wp_page(), page2 now in that pte. C, perhaps the parent of A+B, comes in and write faults the same swap page1 into its mm, reuse_swap_page() succeeds this time, swap1 is freed. kswapd comes in after some time (B still unlucky) and swaps out some pages from A+B and C: it allocates the original swap1 to page2 in A+B, and some other swap2 to the original page1 now in C. But does not immediately free page1 (actually it couldn't: B holds a reference), leaving it in swap cache for now. B at last gets the lock on page1, hooray! Is PageSwapCache(page1)? Yes. Is pte_same(*page_table, orig_pte)? Yes, because page2 has now been given the swap1 which page1 used to have. So B proceeds to insert page1 into A+B's page_table, though its content now belongs to C, quite different from what A wrote there. B ought to have checked that page1's swap was still swap1. Signed-off-by: NHugh Dickins <hughd@google.com> Reviewed-by: NRik van Riel <riel@redhat.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 9月, 2010 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: deal with multiple simultaneously pending signals alpha: fix a 14 years old bug in sigreturn tracing alpha: unb0rk sigsuspend() and rt_sigsuspend() alpha: belated ERESTART_RESTARTBLOCK race fix alpha: Shift perf event pending work earlier in timer interrupt alpha: wire up fanotify and prlimit64 syscalls alpha: kill big kernel lock alpha: fix build breakage in asm/cacheflush.h alpha: remove unnecessary cast from void* in assignment. alpha: Use static const char * const where possible
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide: Fix ordering of procfs registry.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) dca: disable dca on IOAT ver.3.0 multiple-IOH platforms netpoll: Disable IRQ around RCU dereference in netpoll_rx sctp: Do not reset the packet during sctp_packet_config(). net/llc: storing negative error codes in unsigned short MAINTAINERS: move atlx discussions to netdev drivers/net/cxgb3/cxgb3_main.c: prevent reading uninitialized stack memory drivers/net/eql.c: prevent reading uninitialized stack memory drivers/net/usb/hso.c: prevent reading uninitialized memory xfrm: dont assume rcu_read_lock in xfrm_output_one() r8169: Handle rxfifo errors on 8168 chips 3c59x: Remove atomic context inside vortex_{set|get}_wol tcp: Prevent overzealous packetization by SWS logic. net: RPS needs to depend upon USE_GENERIC_SMP_HELPERS phylib: fix PAL state machine restart on resume net: use rcu_barrier() in rollback_registered_many bonding: correctly process non-linear skbs ipv4: enable getsockopt() for IP_NODEFRAG ipv4: force_igmp_version ignored when a IGMPv3 query received ppp: potential NULL dereference in ppp_mp_explode() net/llc: make opt unsigned in llc_ui_setsockopt() ...
-
由 Linus Torvalds 提交于
Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to dm9000 on mach-real6410 ARM: S3C64XX: Fix coding style errors on mach-real6410 ARM: S3C64XX: Prototype SPI devices ARM: S3C64XX: Fix dev-spi build ARM: SAMSUNG: Fix on s5p_gpio_[get,set]_drvstr ARM: SAMSUNG: Fix on drive strength value ARM: S5PV210: Add FIMC clocks ARM: S5PV210: Reduce the iodesc length of systimer ARM: S5PV210: Update I2C-1 Clock Register Property. ARM: S5P: Decrease IO Registers memory region size on FIMC ARM: S5P: Fix DMA coherent mask for FIMC
-
由 Jan Harkes 提交于
Coda's REQ_* defines were renamed to avoid clashes with the block layer (commit 4aeefdc6: "coda: fixup clash with block layer REQ_* defines"). However one was missed and response messages are no longer matched with requests and waiting threads are no longer woken up. This patch fixes this. Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu> [ Also fixed up whitespace while at it -Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 9月, 2010 8 次提交
-
-
由 Guennadi Liakhovetski 提交于
The clkdev API doesn't use .name and .id members of struct clk for clock lookup. Instead clocks should be added to a lookup list. Without this patch audio om the Migo-R board fails silently. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Al Viro 提交于
Unlike the other targets, alpha sets _one_ sigframe and buggers off until the next syscall/interrupt, even if more signals are pending. It leads to quite a few unpleasant inconsistencies, starting with SIGSEGV potentially arriving not where it should and including e.g. mess with sigsuspend(); consider two pending signals blocked until sigsuspend() unblocks them. We pick the first one; then, if we are hit by interrupt while in the handler, we process the second one as well. If we are not, and if no syscalls had been made, we get out of the first handler and leave the second signal pending; normally sigreturn() would've picked it anyway, but here it starts with restoring the original mask and voila - the second signal is blocked again. On everything else we get both delivered consistently. It's actually easy to fix; the only thing to watch out for is prevention of double syscall restart. Fortunately, the idea I've nicked from arm fix by rmk works just fine... Testcase demonstrating the behaviour in question; on alpha we get one or both flags set (usually one), on everything else both are always set. #include <signal.h> #include <stdio.h> int had1, had2; void f1(int sig) { had1 = 1; } void f2(int sig) { had2 = 1; } main() { sigset_t set1, set2; sigemptyset(&set1); sigemptyset(&set2); sigaddset(&set2, 1); sigaddset(&set2, 2); signal(1, f1); signal(2, f2); sigprocmask(SIG_SETMASK, &set2, NULL); raise(1); raise(2); sigsuspend(&set1); printf("had1:%d had2:%d\n", had1, had2); } Tested-by: NMichael Cree <mcree@orcon.net.nz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Al Viro 提交于
The way sigreturn() is implemented on alpha breaks PTRACE_SYSCALL, all way back to 1.3.95 when alpha has grown PTRACE_SYSCALL support. What happens is direct return to ret_from_syscall, in order to bypass mangling of a3 (error indicator) and prevent other mutilations of registers (e.g. by syscall restart). That's fine, but... the entire TIF_SYSCALL_TRACE codepath is kept separate on alpha and post-syscall stopping/notifying the tracer is after the syscall. And the normal path we are forcibly switching to doesn't have it. So we end up with *one* stop in traced sigreturn() vs. two in other syscalls. And yes, strace is visibly broken by that; try to strace the following #include <signal.h> #include <stdio.h> void f(int sig) {} main() { signal(SIGHUP, f); raise(SIGHUP); write(1, "eeeek\n", 6); } and watch the show. The close(1) = 405 in the end of strace output is coming from return value of write() (6 == __NR_close on alpha) and syscall number of exit_group() (__NR_exit_group == 405 there). The fix is fairly simple - the only thing we end up missing is the call of syscall_trace() and we can tell whether we'd been called from the SYSCALL_TRACE path by checking ra value. Since we are setting the switch_stack up (that's what sys_sigreturn() does), we have the right environment for calling syscall_trace() - just before we call undo_switch_stack() and return. Since undo_switch_stack() will overwrite s0 anyway, we can use it to store the result of "has it been called from SYSCALL_TRACE path?" check. The same thing applies in rt_sigreturn(). Tested-by: NMichael Cree <mcree@orcon.net.nz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Al Viro 提交于
Old code used to set regs->r0 and regs->r19 to force the right return value. Leaving that after switch to ERESTARTNOHAND was a Bad Idea(tm), since now that screws the restart - if we hit the case when get_signal_to_deliver() returns 0, we will step back to syscall insn, with v0 set to EINTR and a3 to 1. The latter won't matter, since EINTR is 4, aka __NR_write. Testcase: #include <signal.h> #define _GNU_SOURCE #include <unistd.h> #include <sys/syscall.h> main() { sigset_t mask; sigemptyset(&mask); sigaddset(&mask, SIGCONT); sigprocmask(SIG_SETMASK, &mask, NULL); kill(0, SIGCONT); syscall(__NR_sigsuspend, 1, "b0rken\n", 7); } results on alpha in immediate message to stdout... Fix is obvious; moreover, since we don't need regs anymore, we can switch to normal prototypes for these guys and lose the wrappers. Even better, rt_sigsuspend() is identical to generic version in kernel/signal.c now. Tested-by: NMichael Cree <mcree@orcon.net.nz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Al Viro 提交于
same thing as had been done on other targets back in 2003 - move setting ->restart_block.fn into {rt_,}sigreturn(). Tested-by: NMichael Cree <mcree@orcon.net.nz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Michael Cree 提交于
Pending work from the performance event subsystem is executed in the timer interrupt. This patch shifts the call to perf_event_do_pending() before the call to update_process_times() as the latter may call back into the perf event subsystem and it is prudent to have the pending work executed first. Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Mikael Pettersson 提交于
The 2.6.36-rc kernel added three new system calls: fanotify_init, fanotify_mark, and prlimit64. This patch wires them up on Alpha. Built and booted on an XP900. Untested beyond that. Signed-off-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Arnd Bergmann 提交于
All uses of the BKL on alpha are totally bogus, nothing is really protected by this. Remove the remaining users so we don't have to mark alpha as 'depends on BKL'. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: linux-alpha@vger.kernel.org Signed-off-by: NMatt Turner <mattst88@gmail.com>
-