Martin can maintain the DocBook system for us.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When significant delays happen during boot (e.g.  with a kernel debugger,
but the problem has also seen in other cases) the timeout for blanking the
console may trigger, but the work scheduler may not have been initialized,
yet.  schedule_work() will oops over the null keventd_wq.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Merge 'upstream-2.6.13' branch of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Make sure we re-parent itimers, and use BUG_ON() instead of an explicit
conditional BUG().

The git commit 794f5bfa
accidentally suffers from a previous typo in that file
(',' instead of ';' in end of line). Patch included.

Signed-off-by: Mika Kukkonen (mikukkon@iki.fi)
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is a fixed-up version of the broken "upstream-2.6.13" branch, where
I re-did the manual merge of drivers/net/r8169.c by hand, and made sure
the history is all good.

Signed-Off-By: NLee Revell <rlrevell@joe-job.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The fixes for sparse warnings mixed in with the fixups for
the raw_srb handler resulted in a bug that showed up in the 32 bit
environments when trying to issue calls directly to the physical devices
that are part of the arrays (ioctl scsi passthrough).

Received from Mark Salyzyn at adaptec.
Applied comment from Christoph to remove cpu_to_le32(0)
Applied Mark S fix of missing memcpy.
It applies to the scsi-misc-2.6 git tree.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

There are many drivers that have been setting the generic driver
model level shutdown callback, and pci thus must not override it.

Without this patch we can have really bad data loss on various
raid controllers.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Drivers need not implement a hook that returns FAILED, and does nothing
else, since the SCSI midlayer code will do that for us.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The SCSI ->done() hook should not be called from inside a spinlock.

Drivers that do this are mostly cut-n-paste from 2.2.x-era.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Do all timer zapping in exit_itimers.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

__cfq_get_queue().  __cfq_get_queue() finds an existing queue (struct
cfq_queue) of the current process for the device and returns it.  If it's not
found, __cfq_get_queue() creates and returns a new one if __cfq_get_queue() is
called with __GFP_WAIT flag, or __cfq_get_queue() returns NULL (this means that
get_request() fails) if no __GFP_WAIT flag.

On the other hand, in __make_request(), get_request() is called without
__GFP_WAIT flag at the first time.  Thus, the get_request() fails when there is
no existing queue, typically when it's called for the first I/O request of the
process to the device.

Though it will be followed by get_request_wait() for general case,
__make_request() will just end the I/O with an error (EWOULDBLOCK) when the
request was for read-ahead.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>

Patch from Nicolas Pitre

Without this some devices fail to work again after a suspend event.

Signed-off-by: Nicolas Pitre
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The initial IB2 addresses did not depend on the IB2 base. This
patch defines them as (VERSATILE_IB2_BASE + offset).

Signed-off-by: Catalin Marinas
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The GPIO base for Integrator/CP is different from the
Integrator/AP. This patch sets the correct value for
INTEGRATOR_GPIO_BASE.

Signed-off-by: Catalin Marinas
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The current red and blue colours on the Versatile CLCD are
reversed when the 5:6:5 mode is used. The patch sets the proper
bit in the SYS_CLCD register value.

Signed-off-by: Catalin Marinas
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It looks like logic for enabling hardware tapping in ALPS driver was
inverted and we enable it only if it was already enabled by BIOS or
firmware.

I have a confirmation from one user that the patch below fixes the problem
for him and it might be beneficial if we could get it into 2.6.12.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The ELF core dump code has one use of off_t when writing out segments.
Some of the segments may be passed the 2GB limit of an off_t, even on a
32-bit system, so it's important to use loff_t instead.  This fixes a
corrupted core dump in the bigcore test in GDB's testsuite.
Signed-off-by: NDaniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixed a problem that showed up in the Fedora development tree a few
weeks before the Fedora Core 4 release, initially as slab corruption, later
as hard crashes on boot up, when slab debugging was disabled for the
release.  More details on the history at
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=158424

The problem is caused by sbp2's use of scsi_host->hostdata[0] to hold a
scsi_id, without explicitly requesting space for it.  Since hostdata is
declared as a zero-sized array, we don't get any such space by default, so
it must be explicitly requested.  The patch below implements just that.
Signed-off-by: NAlexandre Oliva <aoliva@redhat.com>
Cc: Jody McIntyre <scjody@modernduck.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

__elv_add_request().  rq.count[READ] + rq.count[WRITE] can increase
more than one if another thread has allocated a request after the
current request is allocated or in_flight could have changed resulting
in larger-than-one change of nrq, thus breaking the threshold
mechanism.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NTejun Heo <htejun@gmail.com>

nothing.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NTejun Heo <htejun@gmail.com>

This fixes various crashes on 64-bit when using this module.

Based upon a patch by Juergen Kreileder <jk@blackdown.de>.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
ACKed-by: NPatrick McHardy <kaber@trash.net>