1. 20 12月, 2015 3 次提交
  2. 19 12月, 2015 22 次提交
  3. 18 12月, 2015 15 次提交
    • K
      xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set. · 408fb0e5
      Konrad Rzeszutek Wilk 提交于
      commit f598282f ("PCI: Fix the NIU MSI-X problem in a better way")
      teaches us that dealing with MSI-X can be troublesome.
      
      Further checks in the MSI-X architecture shows that if the
      PCI_COMMAND_MEMORY bit is turned of in the PCI_COMMAND we
      may not be able to access the BAR (since they are memory regions).
      
      Since the MSI-X tables are located in there.. that can lead
      to us causing PCIe errors. Inhibit us performing any
      operation on the MSI-X unless the MEMORY bit is set.
      
      Note that Xen hypervisor with:
      "x86/MSI-X: access MSI-X table only after having enabled MSI-X"
      will return:
      xen_pciback: 0000:0a:00.1: error -6 enabling MSI-X for guest 3!
      
      When the generic MSI code tries to setup the PIRQ without
      MEMORY bit set. Which means with later versions of Xen
      (4.6) this patch is not neccessary.
      
      This is part of XSA-157
      
      CC: stable@vger.kernel.org
      Reviewed-by: NJan Beulich <jbeulich@suse.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      408fb0e5
    • K
      xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled. · 7cfb905b
      Konrad Rzeszutek Wilk 提交于
      Otherwise just continue on, returning the same values as
      previously (return of 0, and op->result has the PIRQ value).
      
      This does not change the behavior of XEN_PCI_OP_disable_msi[|x].
      
      The pci_disable_msi or pci_disable_msix have the checks for
      msi_enabled or msix_enabled so they will error out immediately.
      
      However the guest can still call these operations and cause
      us to disable the 'ack_intr'. That means the backend IRQ handler
      for the legacy interrupt will not respond to interrupts anymore.
      
      This will lead to (if the device is causing an interrupt storm)
      for the Linux generic code to disable the interrupt line.
      
      Naturally this will only happen if the device in question
      is plugged in on the motherboard on shared level interrupt GSI.
      
      This is part of XSA-157
      
      CC: stable@vger.kernel.org
      Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      7cfb905b
    • K
      xen/pciback: Do not install an IRQ handler for MSI interrupts. · a396f3a2
      Konrad Rzeszutek Wilk 提交于
      Otherwise an guest can subvert the generic MSI code to trigger
      an BUG_ON condition during MSI interrupt freeing:
      
       for (i = 0; i < entry->nvec_used; i++)
              BUG_ON(irq_has_action(entry->irq + i));
      
      Xen PCI backed installs an IRQ handler (request_irq) for
      the dev->irq whenever the guest writes PCI_COMMAND_MEMORY
      (or PCI_COMMAND_IO) to the PCI_COMMAND register. This is
      done in case the device has legacy interrupts the GSI line
      is shared by the backend devices.
      
      To subvert the backend the guest needs to make the backend
      to change the dev->irq from the GSI to the MSI interrupt line,
      make the backend allocate an interrupt handler, and then command
      the backend to free the MSI interrupt and hit the BUG_ON.
      
      Since the backend only calls 'request_irq' when the guest
      writes to the PCI_COMMAND register the guest needs to call
      XEN_PCI_OP_enable_msi before any other operation. This will
      cause the generic MSI code to setup an MSI entry and
      populate dev->irq with the new PIRQ value.
      
      Then the guest can write to PCI_COMMAND PCI_COMMAND_MEMORY
      and cause the backend to setup an IRQ handler for dev->irq
      (which instead of the GSI value has the MSI pirq). See
      'xen_pcibk_control_isr'.
      
      Then the guest disables the MSI: XEN_PCI_OP_disable_msi
      which ends up triggering the BUG_ON condition in 'free_msi_irqs'
      as there is an IRQ handler for the entry->irq (dev->irq).
      
      Note that this cannot be done using MSI-X as the generic
      code does not over-write dev->irq with the MSI-X PIRQ values.
      
      The patch inhibits setting up the IRQ handler if MSI or
      MSI-X (for symmetry reasons) code had been called successfully.
      
      P.S.
      Xen PCIBack when it sets up the device for the guest consumption
      ends up writting 0 to the PCI_COMMAND (see xen_pcibk_reset_device).
      XSA-120 addendum patch removed that - however when upstreaming said
      addendum we found that it caused issues with qemu upstream. That
      has now been fixed in qemu upstream.
      
      This is part of XSA-157
      
      CC: stable@vger.kernel.org
      Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      a396f3a2
    • K
      xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled · 5e0ce145
      Konrad Rzeszutek Wilk 提交于
      The guest sequence of:
      
        a) XEN_PCI_OP_enable_msix
        b) XEN_PCI_OP_enable_msix
      
      results in hitting an NULL pointer due to using freed pointers.
      
      The device passed in the guest MUST have MSI-X capability.
      
      The a) constructs and SysFS representation of MSI and MSI groups.
      The b) adds a second set of them but adding in to SysFS fails (duplicate entry).
      'populate_msi_sysfs' frees the newly allocated msi_irq_groups (note that
      in a) pdev->msi_irq_groups is still set) and also free's ALL of the
      MSI-X entries of the device (the ones allocated in step a) and b)).
      
      The unwind code: 'free_msi_irqs' deletes all the entries and tries to
      delete the pdev->msi_irq_groups (which hasn't been set to NULL).
      However the pointers in the SysFS are already freed and we hit an
      NULL pointer further on when 'strlen' is attempted on a freed pointer.
      
      The patch adds a simple check in the XEN_PCI_OP_enable_msix to guard
      against that. The check for msi_enabled is not stricly neccessary.
      
      This is part of XSA-157
      
      CC: stable@vger.kernel.org
      Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
      Reviewed-by: NJan Beulich <jbeulich@suse.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      5e0ce145
    • K
      xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled · 56441f3c
      Konrad Rzeszutek Wilk 提交于
      The guest sequence of:
      
       a) XEN_PCI_OP_enable_msi
       b) XEN_PCI_OP_enable_msi
       c) XEN_PCI_OP_disable_msi
      
      results in hitting an BUG_ON condition in the msi.c code.
      
      The MSI code uses an dev->msi_list to which it adds MSI entries.
      Under the above conditions an BUG_ON() can be hit. The device
      passed in the guest MUST have MSI capability.
      
      The a) adds the entry to the dev->msi_list and sets msi_enabled.
      The b) adds a second entry but adding in to SysFS fails (duplicate entry)
      and deletes all of the entries from msi_list and returns (with msi_enabled
      is still set).  c) pci_disable_msi passes the msi_enabled checks and hits:
      
      BUG_ON(list_empty(dev_to_msi_list(&dev->dev)));
      
      and blows up.
      
      The patch adds a simple check in the XEN_PCI_OP_enable_msi to guard
      against that. The check for msix_enabled is not stricly neccessary.
      
      This is part of XSA-157.
      
      CC: stable@vger.kernel.org
      Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
      Reviewed-by: NJan Beulich <jbeulich@suse.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      56441f3c
    • K
      xen/pciback: Save xen_pci_op commands before processing it · 8135cf8b
      Konrad Rzeszutek Wilk 提交于
      Double fetch vulnerabilities that happen when a variable is
      fetched twice from shared memory but a security check is only
      performed the first time.
      
      The xen_pcibk_do_op function performs a switch statements on the op->cmd
      value which is stored in shared memory. Interestingly this can result
      in a double fetch vulnerability depending on the performed compiler
      optimization.
      
      This patch fixes it by saving the xen_pci_op command before
      processing it. We also use 'barrier' to make sure that the
      compiler does not perform any optimization.
      
      This is part of XSA155.
      
      CC: stable@vger.kernel.org
      Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Signed-off-by: NJan Beulich <JBeulich@suse.com>
      Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      8135cf8b
    • D
      xen-scsiback: safely copy requests · be69746e
      David Vrabel 提交于
      The copy of the ring request was lacking a following barrier(),
      potentially allowing the compiler to optimize the copy away.
      
      Use RING_COPY_REQUEST() to ensure the request is copied to local
      memory.
      
      This is part of XSA155.
      
      CC: stable@vger.kernel.org
      Reviewed-by: NJuergen Gross <jgross@suse.com>
      Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      be69746e
    • R
      xen-blkback: read from indirect descriptors only once · 18779149
      Roger Pau Monné 提交于
      Since indirect descriptors are in memory shared with the frontend, the
      frontend could alter the first_sect and last_sect values after they have
      been validated but before they are recorded in the request.  This may
      result in I/O requests that overflow the foreign page, possibly
      overwriting local pages when the I/O request is executed.
      
      When parsing indirect descriptors, only read first_sect and last_sect
      once.
      
      This is part of XSA155.
      
      CC: stable@vger.kernel.org
      Signed-off-by: NRoger Pau Monné <roger.pau@citrix.com>
      Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      18779149
    • R
      xen-blkback: only read request operation from shared ring once · 1f13d75c
      Roger Pau Monné 提交于
      A compiler may load a switch statement value multiple times, which could
      be bad when the value is in memory shared with the frontend.
      
      When converting a non-native request to a native one, ensure that
      src->operation is only loaded once by using READ_ONCE().
      
      This is part of XSA155.
      
      CC: stable@vger.kernel.org
      Signed-off-by: NRoger Pau Monné <roger.pau@citrix.com>
      Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      1f13d75c
    • D
      xen-netback: use RING_COPY_REQUEST() throughout · 68a33bfd
      David Vrabel 提交于
      Instead of open-coding memcpy()s and directly accessing Tx and Rx
      requests, use the new RING_COPY_REQUEST() that ensures the local copy
      is correct.
      
      This is more than is strictly necessary for guest Rx requests since
      only the id and gref fields are used and it is harmless if the
      frontend modifies these.
      
      This is part of XSA155.
      
      CC: stable@vger.kernel.org
      Reviewed-by: NWei Liu <wei.liu2@citrix.com>
      Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      68a33bfd
    • D
      xen-netback: don't use last request to determine minimum Tx credit · 0f589967
      David Vrabel 提交于
      The last from guest transmitted request gives no indication about the
      minimum amount of credit that the guest might need to send a packet
      since the last packet might have been a small one.
      
      Instead allow for the worst case 128 KiB packet.
      
      This is part of XSA155.
      
      CC: stable@vger.kernel.org
      Reviewed-by: NWei Liu <wei.liu2@citrix.com>
      Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      0f589967
    • D
      xen: Add RING_COPY_REQUEST() · 454d5d88
      David Vrabel 提交于
      Using RING_GET_REQUEST() on a shared ring is easy to use incorrectly
      (i.e., by not considering that the other end may alter the data in the
      shared ring while it is being inspected).  Safe usage of a request
      generally requires taking a local copy.
      
      Provide a RING_COPY_REQUEST() macro to use instead of
      RING_GET_REQUEST() and an open-coded memcpy().  This takes care of
      ensuring that the copy is done correctly regardless of any possible
      compiler optimizations.
      
      Use a volatile source to prevent the compiler from reordering or
      omitting the copy.
      
      This is part of XSA155.
      
      CC: stable@vger.kernel.org
      Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
      Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      454d5d88
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 73796d8b
      Linus Torvalds 提交于
      Pull networking fixes from David Miller:
      
       1) Fix uninitialized variable warnings in nfnetlink_queue, a lot of
          people reported this...  From Arnd Bergmann.
      
       2) Don't init mutex twice in i40e driver, from Jesse Brandeburg.
      
       3) Fix spurious EBUSY in rhashtable, from Herbert Xu.
      
       4) Missing DMA unmaps in mvpp2 driver, from Marcin Wojtas.
      
       5) Fix race with work structure access in pppoe driver causing
          corruptions, from Guillaume Nault.
      
       6) Fix OOPS due to sh_eth_rx() not checking whether netdev_alloc_skb()
          actually succeeded or not, from Sergei Shtylyov.
      
       7) Don't lose flags when settifn IFA_F_OPTIMISTIC in ipv6 code, from
          Bjørn Mork.
      
       8) VXLAN_HD_RCO defined incorrectly, fix from Jiri Benc.
      
       9) Fix clock source used for cookies in SCTP, from Marcelo Ricardo
          Leitner.
      
      10) aurora driver needs HAS_DMA dependency, from Geert Uytterhoeven.
      
      11) ndo_fill_metadata_dst op of vxlan has to handle ipv6 tunneling
          properly as well, from Jiri Benc.
      
      12) Handle request sockets properly in xfrm layer, from Eric Dumazet.
      
      13) Double stats update in ipv6 geneve transmit path, fix from Pravin B
          Shelar.
      
      14) sk->sk_policy[] needs RCU protection, and as a result
          xfrm_policy_destroy() needs to free policies using an RCU grace
          period, from Eric Dumazet.
      
      15) SCTP needs to clone ipv6 tx options in order to avoid use after
          free, from Eric Dumazet.
      
      16) Missing kbuild export if ila.h, from Stephen Hemminger.
      
      17) Missing mdiobus_alloc() return value checking in mdio-mux.c, from
          Tobias Klauser.
      
      18) Validate protocol value range in ->create() methods, from Hannes
          Frederic Sowa.
      
      19) Fix early socket demux races that result in illegal dst reuse, from
          Eric Dumazet.
      
      20) Validate socket address length in pptp code, from WANG Cong.
      
      21) skb_reorder_vlan_header() uses incorrect offset and can corrupt
          packets, from Vlad Yasevich.
      
      22) Fix memory leaks in nl80211 registry code, from Ola Olsson.
      
      23) Timeout loop count handing fixes in mISDN, xgbe, qlge, sfc, and
          qlcnic.  From Dan Carpenter.
      
      24) msg.msg_iocb needs to be cleared in recvfrom() otherwise, for
          example, AF_ALG will interpret it as an async call.  From Tadeusz
          Struk.
      
      25) inetpeer_set_addr_v4 forgets to initialize the 'vif' field, from
          Eric Dumazet.
      
      26) rhashtable enforces the minimum table size not early enough,
          breaking how we calculate the per-cpu lock allocations.  From
          Herbert Xu.
      
      27) Fix FCC port lockup in 82xx driver, from Martin Roth.
      
      28) FOU sockets need to be freed using RCU, from Hannes Frederic Sowa.
      
      29) Fix out-of-bounds access in __skb_complete_tx_timestamp() and
          sock_setsockopt() wrt.  timestamp handling.  From WANG Cong.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (117 commits)
        net: check both type and procotol for tcp sockets
        drivers: net: xgene: fix Tx flow control
        tcp: restore fastopen with no data in SYN packet
        af_unix: Revert 'lock_interruptible' in stream receive code
        fou: clean up socket with kfree_rcu
        82xx: FCC: Fixing a bug causing to FCC port lock-up
        gianfar: Don't enable RX Filer if not supported
        net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration
        rhashtable: Fix walker list corruption
        rhashtable: Enforce minimum size on initial hash table
        inet: tcp: fix inetpeer_set_addr_v4()
        ipv6: automatically enable stable privacy mode if stable_secret set
        net: fix uninitialized variable issue
        bluetooth: Validate socket address length in sco_sock_bind().
        net_sched: make qdisc_tree_decrease_qlen() work for non mq
        ser_gigaset: remove unnecessary kfree() calls from release method
        ser_gigaset: fix deallocation of platform device structure
        ser_gigaset: turn nonsense checks into WARN_ON
        ser_gigaset: fix up NULL checks
        qlcnic: fix a timeout loop
        ...
      73796d8b
    • W
      net: check both type and procotol for tcp sockets · ac5cc977
      WANG Cong 提交于
      Dmitry reported the following out-of-bound access:
      
      Call Trace:
       [<ffffffff816cec2e>] __asan_report_load4_noabort+0x3e/0x40
      mm/kasan/report.c:294
       [<ffffffff84affb14>] sock_setsockopt+0x1284/0x13d0 net/core/sock.c:880
       [<     inline     >] SYSC_setsockopt net/socket.c:1746
       [<ffffffff84aed7ee>] SyS_setsockopt+0x1fe/0x240 net/socket.c:1729
       [<ffffffff85c18c76>] entry_SYSCALL_64_fastpath+0x16/0x7a
      arch/x86/entry/entry_64.S:185
      
      This is because we mistake a raw socket as a tcp socket.
      We should check both sk->sk_type and sk->sk_protocol to ensure
      it is a tcp socket.
      
      Willem points out __skb_complete_tx_timestamp() needs to fix as well.
      Reported-by: NDmitry Vyukov <dvyukov@google.com>
      Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
      Cc: Eric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
      Acked-by: NWillem de Bruijn <willemb@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ac5cc977
    • I
      drivers: net: xgene: fix Tx flow control · 67894eec
      Iyappan Subramanian 提交于
      Currently the Tx flow control is based on reading the hardware state,
      which is not accurate since it may not reflect the descriptors that
      are not yet reached the memory.
      
      To accurately control the Tx flow, changing it to be software based.
      Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      67894eec