- 06 12月, 2013 5 次提交
-
-
由 Jamal Hadi Salim 提交于
Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless由 David S. Miller 提交于
John W. Linville says: ==================== Please pull this batch of fixes intende for the 3.13 stream! For the mac80211 bits, Johannes says: "For now I have various fixes all over, mostly for issues introduced in relatively recent patches. There's no real pattern to it. Some of the issues like go back longer, but still seemed 3.13 material." And... "These are just two patches disabling the broken CSA code. Once this goes into your tree I'll merge it into mac80211-next and revert there (since we fixed the bugs there)." For the iwlwifi bits, Emmanuel says: "I have here a few fixes for BT Coex. One of them is a NULL pointer dereference. Another one avoids to enable a feature that can make the firmware unhappy since the firmware isn't ready for it yet. WE also avoid a WARNING that can be triggered upon association in not-so-bad cases even if the association succeeded. We add support for new NICs (not yet on the market) and bump the API so that 3.13 will be able to work with the new firmware that will be out soon hopefully. I also have a boundary check from Johannes." In addition to those... - Arend van Spriel fixes a brcmfmac problem that could use an uninitialized variable in an error path. - Borislav Petkov fixes a Kconfig-based build breakage problem for brcmsmac. - Michal Nazarewicz fixes a couple of NULL pointer dereference problems in ath9k and wcn36xx. - Sujith Manoharan fixes a couple of ath9k problems related to incorrect interpretation of EEPROM configuration data. - Ujjal Roy fixes a memory leak in mwifiex. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 12月, 2013 1 次提交
-
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
- 04 12月, 2013 7 次提交
-
-
由 David S. Miller 提交于
Hariprasad Shenai says: ==================== Fixes T5 adapter init, due to incorrect FW version check This patch series fixes, Chelsio T5 adapter initialization failure due to incorrect firmware version check. This patch series modifies the firmware flashing mechanism for T4/T5 adapter. The patch series moves chip type from struct adapter to struct adapter_params. It changes the references of chip type in cxgb4 and cxgb4vf drivers such that build failure is avoided. Patch 3/3 is dependent on patch 1/3 Patch 2/3 is also dependent on patch 1/3 We would like to request this patch series to get merged via David Miller's 'net' tree. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yang 提交于
When driver registration fails, we need to clean up the resources allocated before. mlx4_core missed destroying the workqueue allocated. This patch destroys the workqueue when registration fails. Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Venkat Venkatsubra 提交于
After congestion update on a local connection, when rds_ib_xmit returns less bytes than that are there in the message, rds_send_xmit calls back rds_ib_xmit with an offset that causes BUG_ON(off & RDS_FRAG_SIZE) to trigger. For a 4Kb PAGE_SIZE rds_ib_xmit returns min(8240,4096)=4096 when actually the message contains 8240 bytes. rds_send_xmit thinks there is more to send and calls rds_ib_xmit again with a data offset "off" of 4096-48(rds header) =4048 bytes thus hitting the BUG_ON(off & RDS_FRAG_SIZE) [RDS_FRAG_SIZE=4k]. The commit 6094628b "rds: prevent BUG_ON triggering on congestion map updates" introduced this regression. That change was addressing the triggering of a different BUG_ON in rds_send_xmit() on PowerPC architecture with 64Kbytes PAGE_SIZE: BUG_ON(ret != 0 && conn->c_xmit_sg == rm->data.op_nents); This was the sequence it was going through: (rds_ib_xmit) /* Do not send cong updates to IB loopback */ if (conn->c_loopback && rm->m_inc.i_hdr.h_flags & RDS_FLAG_CONG_BITMAP) { rds_cong_map_updated(conn->c_fcong, ~(u64) 0); return sizeof(struct rds_header) + RDS_CONG_MAP_BYTES; } rds_ib_xmit returns 8240 rds_send_xmit: c_xmit_data_off = 0 + 8240 - 48 (rds header accounted only the first time) = 8192 c_xmit_data_off < 65536 (sg->length), so calls rds_ib_xmit again rds_ib_xmit returns 8240 rds_send_xmit: c_xmit_data_off = 8192 + 8240 = 16432, calls rds_ib_xmit again and so on (c_xmit_data_off 24672,32912,41152,49392,57632) rds_ib_xmit returns 8240 On this iteration this sequence causes the BUG_ON in rds_send_xmit: while (ret) { tmp = min_t(int, ret, sg->length - conn->c_xmit_data_off); [tmp = 65536 - 57632 = 7904] conn->c_xmit_data_off += tmp; [c_xmit_data_off = 57632 + 7904 = 65536] ret -= tmp; [ret = 8240 - 7904 = 336] if (conn->c_xmit_data_off == sg->length) { conn->c_xmit_data_off = 0; sg++; conn->c_xmit_sg++; BUG_ON(ret != 0 && conn->c_xmit_sg == rm->data.op_nents); [c_xmit_sg = 1, rm->data.op_nents = 1] What the current fix does: Since the congestion update over loopback is not actually transmitted as a message, all that rds_ib_xmit needs to do is let the caller think the full message has been transmitted and not return partial bytes. It will return 8240 (RDS_CONG_MAP_BYTES+48) when PAGE_SIZE is 4Kb. And 64Kb+48 when page size is 64Kb. Reported-by: NJosh Hunt <joshhunt00@gmail.com> Tested-by: NHonggang Li <honli@redhat.com> Acked-by: NBang Nguyen <bang.nguyen@oracle.com> Signed-off-by: NVenkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
xenvif_start_xmit() relies on checking vif->task for NULL to determine whether the vif is ready to accept packets. The task thread is stopped in xenvif_disconnect() but task is not set to NULL. Thus, on a re-connect the check will give a false positive. Also since commit ea732dff (Handle backend state transitions in a more robust way) it should not be possible for xenvif_connect() to be called if the vif is already connected so change the check of vif->tx_irq to a BUG_ON() and also add a BUG_ON(vif->task). Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2013 22 次提交
-
-
由 David S. Miller 提交于
This reverts commit 018c5bba. It causes regressions for people using chips driven by the sungem driver. Suspicion is that the skb->csum value isn't being adjusted properly. The change also has a bug in that if __pskb_trim() fails, we'll leave a corruped skb->csum value in there. We would really need to revert it to it's original value in that case. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Few network drivers really supports frag_list : virtual drivers. Some drivers wrongly advertise NETIF_F_FRAGLIST feature. If skb with a frag_list is given to them, packet on the wire will be corrupt. Remove this flag, as core networking stack will make sure to provide packets that can be sent without corruption. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Anirudha Sarangi <anirudh@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kamala R 提交于
The behaviour of blackhole and prohibit routes has been corrected by setting the input and output pointers of the dst variable appropriately. For blackhole routes, they are set to dst_discard and to ip6_pkt_discard and ip6_pkt_discard_out respectively for prohibit routes. ipv6: ip6_pkt_prohibit(_out) should not depend on CONFIG_IPV6_MULTIPLE_TABLES We need ip6_pkt_prohibit(_out) available without CONFIG_IPV6_MULTIPLE_TABLES Signed-off-by: NKamala R <kamala@aristanetworks.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 François-Xavier Le Bail 提交于
Signed-off-by: NFrancois-Xavier Le Bail <fx.lebail@yahoo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sebastian Siewior 提交于
On tx submit the driver always dma_map_single() FEC_ENET_TX_FRSIZE (=2048) bytes. This works because we don't overwrite any memory after the data buffer, we remove it from cache if it was there. So we hurt performace in case the mapping of a smaller area makes a difference. There is also a bug: If the data area starts shortly before the end of RAM say 0xc7fffa10 and the RAM ends at 0xc8000000 then we have enough space to fit the data area (according to skb->len) but we would map beyond end of ram if we are using 2048. In v2.6.31 (against which kernel this patch made) there is the following check in dma_cache_maint(): |BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1)); Since the area starting at 0xc8000000 is no longer virt_addr_valid() we BUG() during dma_map_single(). The BUG() statement was removed in v3.5-rc1 as per 2dc6a016 ("ARM: dma-mapping: use asm-generic/dma-mapping-common.h"). This patch was tested on v2.6.31 and then forward-ported and compile tested only against the net tree. I think it is still worth fixing mainline even after the BUG() statement is gone. Tested-by: NFugang Duan <B38611@freescale.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
When only one port of the two port is pinned out, then dt probe is failing because second port phy is not found. fixing this by checking the number of slaves and breaking the loop. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafael J. Wysocki 提交于
Modify tg3_chip_reset() and tg3_close() to check if the PCI network adapter device is accessible at all in order to skip poking it or trying to handle a carrier loss in vain when that's not the case. Introduce a special PCI helper function pci_device_is_present() for this purpose. Of course, this uncovers the lack of the appropriate RTNL locking in tg3_suspend() and tg3_resume(), so add that locking in there too. These changes prevent tg3 from burning a CPU at 100% load level for solid several seconds after the Thunderbolt link is disconnected from a Matrox DS1 docking station. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Duan Jiong 提交于
when dealing with a RA message, if accept_ra_defrtr is false, the kernel will not add the default route, and then deal with the following route information options. Unfortunately, those options maybe contain default route, so let's judge the accept_ra_defrtr before calling rt6_route_rcv. Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: - Correction of fuzzy and fragile IRQ_RETVAL macro - IRQ related resume fix affecting only XEN - ARM/GIC fix for chained GIC controllers * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Gic: fix boot for chained gics irq: Enable all irqs unconditionally in irq_resume genirq: Correct fuzzy and fragile IRQ_RETVAL() definition
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "Various smaller fixlets, all over the place" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/doc: Fix generation of device-drivers sched: Expose preempt_schedule_irq() sched: Fix a trivial typo in comments sched: Remove unused variable in 'struct sched_domain' sched: Avoid NULL dereference on sd_busy sched: Check sched_domain before computing group power MAINTAINERS: Update file patterns in the lockdep and scheduler entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Misc kernel and tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools lib traceevent: Fix conversion of pointer to integer of different size perf/trace: Properly use u64 to hold event_id perf: Remove fragile swevent hlist optimization ftrace, perf: Avoid infinite event generation loop tools lib traceevent: Fix use of multiple options in processing field perf header: Fix possible memory leaks in process_group_desc() perf header: Fix bogus group name perf tools: Tag thread comm as overriden
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull Xen bug-fixes from Konrad Rzeszutek Wilk: "Fixes to patches that went in this merge window along with a latent bug: - Fix lazy flushing in case m2p override fails. - Fix module compile issues with ARM/Xen - Add missing call to DMA map page for Xen SWIOTLB for ARM" * tag 'stable/for-linus-3.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/gnttab: leave lazy MMU mode in the case of a m2p override failure xen/arm: p2m_init and p2m_lock should be static arm/xen: Export phys_to_mach to fix Xen module link errors swiotlb-xen: add missing xen_dma_map_page call
-
由 Arend van Spriel 提交于
Building brcmfmac for sparc64 gave the following warning: CC [M] drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.o bcmsdh_sdmmc.c: In function 'brcmf_sdioh_request_byte': bcmsdh_sdmmc.c:89:6: warning: 'err_ret' may be used uninitialized in this function [-Wuninitialized] Inspecting the code it indeed had a path of execution in which the return value was used uninitialized. This patch fixes that code path. Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Reviewed-by: NFranky Lin <frankyl@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michal Nazarewicz 提交于
If kmalloc fails wcn36xx_smd_rsp_process will attempt to dereference a NULL pointer. There might be a better error recovery then just printing an error, but printing an error message is better then the current behaviour. Signed-off-by: NMichal Nazarewicz <mina86@mina86.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michal Nazarewicz 提交于
Code in ath9k_hw_set_clockrate function indicates that ah->curchan (and thus chan local variable) may be NULL. If that is indeed the case, IS_CHAN_HT40(chan) check has to be performed only in branch where chan is not NULL. Moving the code under already existing if condition fixes this issue. Signed-off-by: NMichal Nazarewicz <mina86@mina86.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
The EEPROM parameter to determine whether the bias strength values for XLNA have to be applied is part of the miscConfiguration field and not featureEnable. Cc: stable@vger.kernel.org Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Bit 5 in the miscConfiguration field of the base EEPROM header denotes whether QuickDrop is enabled or not. Fix the incorrect usage of BIT(1) and also make sure that this is done only for the required chips. Cc: stable@vger.kernel.org Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi fixes from Mark Brown: "A smattering of driver specific fixes here, including a bunch for a long standing common pattern in the error handling paths, and a fix for an embarrassing thinko in the new devm master registration code" * tag 'spi-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi/pxa2xx: Restore private register bits. spi/qspi: Fix qspi remove path. spi/qspi: cleanup pm_runtime error check. spi/qspi: set correct platform drvdata in ti_qspi_probe() spi/pxa2xx: add new ACPI IDs spi: core: invert success test in devm_spi_register_master spi: spi-mxs: fix reference leak to master in mxs_spi_remove() spi: bcm63xx: fix reference leak to master in bcm63xx_spi_remove() spi: txx9: fix reference leak to master in txx9spi_remove() spi: mpc512x: fix reference leak to master in mpc512x_psc_spi_do_remove() spi: rspi: use platform drvdata correctly in rspi_remove() spi: bcm2835: fix reference leak to master in bcm2835_spi_remove()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking updates from David Miller: "Here is a pile of bug fixes that accumulated while I was in Europe" 1) In fixing kernel leaks to userspace during copying of socket addresses, we broke a case that used to work, namely the user providing a buffer larger than the in-kernel generic socket address structure. This broke Ruby amongst other things. Fix from Dan Carpenter. 2) Fix regression added by byte queue limit support in 8139cp driver, from Yang Yingliang. 3) The addition of MSG_SENDPAGE_NOTLAST buggered up a few sendpage implementations, they should just treat it the same as MSG_MORE. Fix from Richard Weinberger and Shawn Landden. 4) Handle icmpv4 errors received on ipv6 SIT tunnels correctly, from Oussama Ghorbel. In particular we should send an ICMPv6 unreachable in such situations. 5) Fix some regressions in the recent genetlink fixes, in particular get the pmcraid driver to use the new safer interfaces correctly. From Johannes Berg. 6) macvtap was converted to use a per-cpu set of statistics, but some code was still bumping tx_dropped elsewhere. From Jason Wang. 7) Fix build failure of xen-netback due to missing include on some architectures, from Andy Whitecroft. 8) macvtap double counts received packets in statistics, fix from Vlad Yasevich. 9) Fix various cases of using *_STATS_BH() when *_STATS() is more appropriate. From Eric Dumazet and Hannes Frederic Sowa. 10) Pktgen ipsec mode doesn't update the ipv4 header length and checksum properly after encapsulation. Fix from Fan Du. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) net/mlx4_en: Remove selftest TX queues empty condition {pktgen, xfrm} Update IPv4 header total len and checksum after tranformation virtio_net: make all RX paths handle erors consistently virtio_net: fix error handling for mergeable buffers virtio_net: Fixed a trivial typo (fitler --> filter) netem: fix gemodel loss generator netem: fix loss 4 state model netem: missing break in ge loss generator net/hsr: Support iproute print_opt ('ip -details ...') net/hsr: Very small fix of comment style. MAINTAINERS: Added net/hsr/ maintainer ipv6: fix possible seqlock deadlock in ip6_finish_output2 ixgbe: Make ixgbe_identify_qsfp_module_generic static ixgbe: turn NETIF_F_HW_L2FW_DOFFLOAD off by default ixgbe: ixgbe_fwd_ring_down needs to be static e1000: fix possible reset_task running after adapter down e1000: fix lockdep warning in e1000_reset_task e1000: prevent oops when adapter is being closed and reset simultaneously igb: Fixed Wake On LAN support inet: fix possible seqlock deadlocks ...
-
由 Linus Torvalds 提交于
The pipe code was trying (and failing) to be very careful about freeing the pipe info only after the last access, with a pattern like: spin_lock(&inode->i_lock); if (!--pipe->files) { inode->i_pipe = NULL; kill = 1; } spin_unlock(&inode->i_lock); __pipe_unlock(pipe); if (kill) free_pipe_info(pipe); where the final freeing is done last. HOWEVER. The above is actually broken, because while the freeing is done at the end, if we have two racing processes releasing the pipe inode info, the one that *doesn't* free it will decrement the ->files count, and unlock the inode i_lock, but then still use the "pipe_inode_info" afterwards when it does the "__pipe_unlock(pipe)". This is *very* hard to trigger in practice, since the race window is very small, and adding debug options seems to just hide it by slowing things down. Simon originally reported this way back in July as an Oops in kmem_cache_allocate due to a single bit corruption (due to the final "spin_unlock(pipe->mutex.wait_lock)" incrementing a field in a different allocation that had re-used the free'd pipe-info), it's taken this long to figure out. Since the 'pipe->files' accesses aren't even protected by the pipe lock (we very much use the inode lock for that), the simple solution is to just drop the pipe lock early. And since there were two users of this pattern, create a helper function for it. Introduced commit ba5bb147 ("pipe: take allocation and freeing of pipe_inode_info out of ->i_mutex"). Reported-by: NSimon Kirby <sim@hostway.ca> Reported-by: NIan Applegate <ia@cloudflare.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org # v3.10+ Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 12月, 2013 5 次提交
-
-
由 Simon Wunderlich 提交于
When external CSA IEs are received (beacons or action messages), a channel switch is triggered as well. This should only be allowed on devices which actually support channel switches, otherwise disconnect. (For the corresponding userspace invocation, the wiphy flag is checked in nl80211). Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Simon Wunderlich 提交于
The channel switch announcement code has some major locking problems which can cause a deadlock in worst case. A series of fixes has been proposed, but these are non-trivial and need to be tested first. Therefore disable CSA completely for 3.13. Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Eugenia Emantayev 提交于
Remove waiting for TX queues to become empty during selftest. This check is not necessary for any purpose, and might put the driver into an infinite loop. Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 fan.du 提交于
commit a553e4a6 ("[PKTGEN]: IPSEC support") tried to support IPsec ESP transport transformation for pktgen, but acctually this doesn't work at all for two reasons(The orignal transformed packet has bad IPv4 checksum value, as well as wrong auth value, reported by wireshark) - After transpormation, IPv4 header total length needs update, because encrypted payload's length is NOT same as that of plain text. - After transformation, IPv4 checksum needs re-caculate because of payload has been changed. With this patch, armmed pktgen with below cofiguration, Wireshark is able to decrypted ESP packet generated by pktgen without any IPv4 checksum error or auth value error. pgset "flag IPSEC" pgset "flows 1" Signed-off-by: NFan Du <fan.du@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
receive mergeable now handles errors internally. Do same for big and small packet paths, otherwise the logic is too hard to follow. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-