- 31 7月, 2009 16 次提交
-
-
由 Pierre Ossman 提交于
I do not have the time to take care of this, so remove myself as maintainer. Signed-off-by: NPierre Ossman <pierre@ossman.eu>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NPavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: NPierre Ossman <pierre@ossman.eu>
-
the code allready uses flush_kernel_dcache_page(). This patch updates the driver to the recent sg API changes which require that either SG_MITER_TO_SG or SG_MITER_FROM_SG is set. SG_MITER_TO_SG calls flush_kernel_dcache_page() in sg_mitter_stop() Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Acked-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NPierre Ossman <pierre@ossman.eu>
-
so the page will be flushed on unmap on ARCH which need it. Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: NPierre Ossman <pierre@ossman.eu>
-
sg_miter_start() is currently unaware of the direction of the copy process (to or from the scatter list). It is important to know the direction because the page has to be flushed in case the data written is seen on a different mapping in user land on cache incoherent architectures. Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NPierre Ossman <pierre@ossman.eu>
-
由 Linus Torvalds 提交于
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing/stat: Fix seqfile memory leak function-graph: Fix seqfile memory leak trace_stack: Fix seqfile memory leak profile: Suppress warning about large allocations when profile=1 is specified
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: be more polite in the async caching threads Btrfs: preserve commit_root for async caching
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx由 Linus Torvalds 提交于
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmaengine: at_hdmac: add DMA slave transfers dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller dmaengine: dmatest: correct thread_count while using multiple thread per channel dmaengine: dmatest: add a maximum number of test iterations drivers/dma: Remove unnecessary semicolons drivers/dma/fsldma.c: Remove unnecessary semicolons dmaengine: move HIGHMEM64G restriction to ASYNC_TX_DMA fsldma: do not clear bandwidth control bits on the 83xx controller fsldma: enable external start for the 83xx controller fsldma: use PCI Read Multiple command
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: Fix loading of VAT inode when drive wrongly reports number of recorded blocks
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6: quota: Silence lockdep on quota_on
-
git://git.infradead.org/users/cbou/battery-2.6.31由 Linus Torvalds 提交于
* git://git.infradead.org/users/cbou/battery-2.6.31: Add ds2782 battery gas gauge driver olpc_battery: Ensure that the TRICKLE bit is checked olpc_battery: Fix up eeprom read function
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: remove dcache entries for remote deleted inodes GFS2: Fix incorrent statfs consistency check GFS2: Don't put unlikely reclaim candidates on the reclaim list. GFS2: Don't try and dealloc own inode GFS2: Fix panic in glock memory shrinker GFS2: keep statfs info in sync on grows GFS2: Shrink the shrinker
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx powerpc/86xx: Update GE Fanuc sbc310 default configuration powerpc/86xx: Update defconfig for GE Fanuc's PPC9A cpm_uart: Don't use alloc_bootmem in cpm_uart_cpm2.c powerpc/83xx: Fix PCI IO base address on MPC837xE-RDB boards powerpc/85xx: Don't scan for TBI PHY addresses on MPC8569E-MDS boards powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boards powerpc/mm: Fix SMP issue with MMU context handling code
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest and virtio: cleanup struct definitions to Linux style. lguest: update commentry lguest: fix comment style virtio: refactor find_vqs virtio: delete vq from list virtio: fix memory leak on device removal lguest: fix descriptor corruption in example launcher lguest: dereferencing freed mem in add_eventfd()
-
由 Masami Hiramatsu 提交于
Use kernel_text_address() for checking probe address instead of __kernel_text_address(), because __kernel_text_address() returns true for init functions even after relaseing those functions. That will hit a BUG() in text_poke(). Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Not that anybody can blame him. It's a morass. But hey, it's way better than it _used_ to be, though, so thanks for all the fish. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 7月, 2009 24 次提交
-
-
由 Jan Kara 提交于
Commit d01730d7 didn't completely fix the problem since we still take dqio_mutex and i_mutex in the wrong order. Move taking of i_mutex further down (luckily it's needed only for updating inode flags) below where dqio_mutex is taken. Tested-by: NValdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
VAT inode is located in the last block recorded block of the medium. When the drive errorneously reports number of recorded blocks, we failed to load the VAT inode and thus mount the medium. This patch makes kernel try to read VAT inode from the last block of the device if it is different from the last recorded block. Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Chris Mason 提交于
The semaphore used by the async caching threads can prevent a transaction commit, which can make the FS appear to stall. This releases the semaphore more often when a transaction commit is in progress. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan Zheng 提交于
The async block group caching code uses the commit_root pointer to get a stable version of the extent allocation tree for scanning. This copy of the tree root isn't going to change and it significantly reduces the complexity of the scanning code. During a commit, we have a loop where we update the extent allocation tree root. We need to loop because updating the root pointer in the tree of tree roots may allocate blocks which may change the extent allocation tree. Right now the commit_root pointer is changed inside this loop. It is more correct to change the commit_root pointer only after all the looping is done. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Benjamin Marzinski 提交于
When a file is deleted from a gfs2 filesystem on one node, a dcache entry for it may still exist on other nodes in the cluster. If this happens, gfs2 will be unable to free this file on disk. Because of this, it's possible to have a gfs2 filesystem with no files on it and no free space. With this patch, when a node receives a callback notifying it that the file is being deleted on another node, it schedules a new workqueue thread to remove the file's dcache entry. Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Benjamin Marzinski 提交于
Since both linked and unlinked inodes are counted by rgd->rd_dinodes, It makes no sense to count them with the used data blocks (first check that I changed), it makes sense to count them with the linked inodes (second check), and it makes no sense to care if there are more unlinked inodes than linked ones. This fixes these errors. Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Benjamin Marzinski 提交于
GFS2 was placing far too many glocks on the reclaim list that were not good candidates for freeing up from cache. These locks would sit there and repeatedly get scanned to see if they could be reclaimed, wasting a lot of time when there was memory pressure. This fix does more checks on the locks to see if they are actually likely to be removable from cache. Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
When searching for unlinked, but still allocated inodes during block allocation, avoid the block relating to the inode that is doing the allocation. This fixes a hang caused when an unlinked, but still open, inode tries to allocate some more blocks and lands up finding itself during the search for deallocatable inodes. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Benjamin Marzinski 提交于
It is possible for gfs2_shrink_glock_memory() to check a glock for demotion that's in the process of being freed by gfs2_glock_put(). In this case, gfs2_shrink_glock_memory() will acquire a new reference to this glock, and then try to free the glock itself when it drops the refernce. To solve this, gfs2_shrink_glock_memory() just needs to check if the glock is in the process of being freed, and if so skip it without ever unlocking the lru_lock. Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com> Acked-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Benjamin Marzinski 提交于
GFS2 wasn't syncing its statfs info on grows. This causes a problem when you grow the filesystem on multiple nodes. GFS2 would calculate the new space based on the resource groups (which are always current), and then assume that the filesystem had grown the from the existing statfs size. If you grew the filesystem on two different nodes in a short time, the second node wouldn't see the statfs size change from the first node, and would assume that it was grown by a larger amount than it was. When all these changes were synced out, the total fileystem size would be incorrect (the first grow would be counted twice). This patch syncs makes GFS2 read in the statfs changes from disk before a grow, and write them out after the grow, while the master statfs inode is locked. Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This patch removes some of the special cases that the shrinker was trying to deal with. As a result we leave fewer items on the list and none at all which cannot be demoted. This makes the list scanning more efficient and solves some issues seen with large numbers of inodes. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Rusty Russell 提交于
I've been doing this for years, and akpm picked me up on it about 12 months ago. lguest partly serves as example code, so let's do it Right. Also, remove two unused fields in struct vblk_info in the example launcher. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com>
-
由 Rusty Russell 提交于
Every so often, after code shuffles, I need to go through and unbitrot the Lguest Journey (see drivers/lguest/README). Since we now use RCU in a simple form in one place I took the opportunity to expand that explanation. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
-
由 Rusty Russell 提交于
I don't really notice it (except to begrudge the extra vertical space), but Ingo does. And he pointed out that one excuse of lguest is as a teaching tool, it should set a good example. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com>
-
由 Michael S. Tsirkin 提交于
This refactors find_vqs, making it more readable and robust, and fixing two regressions from 2.6.30: - double free_irq causing BUG_ON on device removal - probe failure when vq can't be assigned to msi-x vector (reported on old host kernels) Tested-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Michael S. Tsirkin 提交于
This makes delete vq the reverse of find vq. This is required to make it possible to retry find_vqs after a failure, otherwise the list gets corrupted. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Michael S. Tsirkin 提交于
Make vp_free_vectors do the reverse of vq_request_vectors. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
1d589bb1 "Add serial number support for virtio_blk, V4a" extended 'struct virtio_blk_config' to 536 bytes. Lguest and S/390 both use an 8 bit value for the feature length, and this change broke them (if the code is naive). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: John Cooper <john.cooper@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com>
-
由 Dan Carpenter 提交于
"new" was freed and then dereferenced. Also the return value wasn't being used so I modified the caller as well. Compile tested only. Found by smatch (http://repo.or.cz/w/smatch.git). regards, dan carpenter Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Martyn Welch 提交于
General update of defconfig including the following notable changes: - Enable Highmem support. - Support for PCMCIA based daughter card. Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Martyn Welch 提交于
General update of defconfig including the following notable changes: - Enable GPIO access via sysfs on GE Fanuc's PPC9A. - Enable Highmem support. - Support for PCMCIA based daughter card. Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Mark Ware 提交于
This is another alloc_bootmem() -> kzalloc() change, this time to fix the non-fatal badness caused when booting with a cpm2_uart console. Signed-off-by: NMark Ware <mware@elphinstone.net> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
U-Boot maps PCI IO at 0xe0300000, while current dts files specify 0xe2000000. This leads to the following oops with CONFIG_8139TOO_PIO=y. 8139too Fast Ethernet driver 0.9.28 Machine check in kernel mode. Caused by (from SRR1=41000): Transfer error ack signal Oops: Machine check, sig: 7 [#1] MPC837x RDB [...] NIP [00000900] 0x900 LR [c0439df8] rtl8139_init_board+0x238/0x524 Call Trace: [cf831d90] [c0439dcc] rtl8139_init_board+0x20c/0x524 (unreliable) [cf831de0] [c043a15c] rtl8139_init_one+0x78/0x65c [cf831e40] [c0235250] pci_call_probe+0x20/0x30 [...] This patch fixes the issue by specifying the correct PCI IO base address. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-