- 30 6月, 2005 18 次提交
-
-
由 Dominik Brodowski 提交于
Fix up PCMCIA modalias file in sysfs Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Mahoney 提交于
The following patch enables attrs by default if the reiserfs_attrs_cleared bit is set in the superblock. This allows chattr-type attrs to be used without any further action by the user. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Mahoney 提交于
ReiserFS currently will allow the user to set/get attrs for files regardless if they are enabled. The patch checks to see if they are enabled, and returns -NOTTY if they are not. ext[23] doesn't need this check because attrs are always enabled. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Tony Luck 提交于
Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Tony Luck 提交于
Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Tony Luck 提交于
-
由 Russell King 提交于
We were forcing SIGFPE on to a user program for no good reason. Use send_sig_info() instead. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
VFP used __divdi3 64-bit division needlessly. Convert it to use our 64-bit by 32-bit division instead. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Tony Lindgren 提交于
Patch from Tony Lindgren This patch adds support for Dynamic Tick Timer for OMAP. This patch is an updated version of ARM patch 2642/1 to make it work with the already integrated generic ARM dyntick support. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Remove legacy ISA serial ports for Accent, Boca, Fourport, Hub6 and MCA from the architecture specific serial.h include. The only ports which remain in asm-*/serial.h are the platform specific entries. These should really be converted by platform maintainers to use a platform device, such as can be found in arch/arm/mach-footbridge/isa.c Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Disable the transmitter whenever we want to prevent characters being transmitted by flow control. However, if we run out of characters to send and want to only disable the TX interrupt, allow that scenario. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Fix bugme #4712: read the CTS status and set hw_stopped if CTS is not active when opening the port and/or enabling CRTSCTS Thanks to Stefan Wolff for spotting this problem. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The nmi watchdog code hasn't been merged for this platform yet. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre Those are big, slow and generally not recommended for kernel code. They are even not present on i386. So it should be concluded that one could as well get away with do_div() alone. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Prakash Punnoor 提交于
I am using the atxp1 module to change vcore on my NForce2 via userspace daemon (see punnoor.de). Currently the atxp1 module will write to the log on every vcore change, thus filling up my log - which I don't want. I am no kernel coder, but I guess, this one-liner will change this behaviour in a wanted way, ie output will be made for debug purposes only. Signed-off-by: NPrakash Punnoor <prakash@punnoor.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 6月, 2005 22 次提交
-
-
由 Hugh Dickins 提交于
get_request is now expected to be holding on to queue_lock, with interrupts disabled, when it returns NULL; but one path forgot that, causing all kinds of nastiness under swap load - badness backtraces, strange failures, BUGs. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas The compiler allocates r14 for the stk variable in the __asm__ directive. This is a shadowed register and gets changed when the mode is changed, causing random values in the SP register. The patch adds a clobber for the r14 register. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie With DEBUG enabled, head.S includes arch/debug-macro.S. On the PXA, this contains references to the macro io_p2v() so hardware.h needs to be included. Signed-off-by: NRichard Purdie <rpurdie@openedhand.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Convert ARMs timer implementations to use readl/writel instead of accessing the registers via a struct. People have recently asked if accessing timers via a structure is the "right way" and its not the Linux way. So fix this code to conform to "The Linux Way"(tm). Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Re-tab the devs.c file, and change the initialiser for the mach-vr1000.c to use `.xxx = yyy` form. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks All current S3C24XX implementations from Simtec share the same requirements for suspend/resume information. This patch moves the save code out of the mach-bast.c file, and into it's own so it can be shared by all the current Simtec S3C24XX implementations. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
This patch changes the way serial ports are locked when getting modem status. This change is necessary because we will need to atomically read the modem status and take action depending on the CTS status. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
-
由 Linus Torvalds 提交于
Ok, a lot of things were pending after the 2.6.12 release, let's try to start calming things down again.
-
由 Jeff Garzik 提交于
This crept in with the resync-to-mainline. Nothing uses 802.11-crypt in mainline, so we can safely comment it out for now. Signed-off-by: NJeff Garzik <jgarzik@pobox.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Jones 提交于
This patch adds the SiS 760 ID to the amd64-agp driver, so that agpgart can be used on Athlon64 boards based on this chip. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 William Lee Irwin III 提交于
Something reverted most of the arch/sparc/Kconfig changes, leaving arch/sparc/ unconfigurable. This patch re-removes the parts made redundant by drivers/Kconfig in addition to a mysterious, spurious second instance of source "mm/Kconfig". cvs strikes again? Signed-off-by: NWilliam Irwin <wli@holomorphy.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Corrections to Documentation/Submitting{Drivers,Patches} - update LANANA info. - fix some typos - update 2.2 kernel maintainer info. - update 'dontdiff' info. - update URLs for patch scripts - add Trivial Patch Monkey URL - add more references for submitting patches Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
New cards included. V4L1 api renamed. Message included informing it is obsoleted by V4L2 API. V4L2 api included. Mark all 7135 cards as 7133. Signed-off-by: Luc Saillard <luc@saillard.org>. Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NHermann Pitton <hermann.pitton@onlinehome.de> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
Add Philips Webcam format. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Luc Saillard <luc@saillard.org>. Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
* bttv-driver.c, bttvp.h: - New bttv module params: - uv_ratio : allow a ratio of saturation between u and v. If you have a ratio of 40 and a saturation of 100, usat will be 80 and vstat 120. Useful to correct a bad color balance. - full_luma_range : provide a better contrast in using the full range 0-253 of values instead of 16-253. - coring : to have a better black level. - radio range is now defined on tuner-core.c. Cleaning up. * bttvp.h: - Fix gcc 4.0 compilation Signed-off-by: NJorik Jonker <jorik@dnd.utwente.nl> Signed-off-by: NSylvain Meyer <sylvain.meyer@worldonline.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
*tuner-core.c: - some tuner_info msgs will be generated only if insmod opt tuner_debug enabled. - Implemented tuner-core support for VIDIO_S_TUNER to allow changing mono/stereo mode - Remove unneeded config options. - I2C_CLIENT_MULTI option removed. - support for Philips FMD12ME hybrid tuner - allow to initialize with another tuner - Move PHILIPS_FMD initialization code to set_type function, * tda8290: - Fix dumb error in tda8290 tunning. - Radio tuner uses high-precision step instead of 62.5 KHz. *tea5767.c: - tuner_info msgs will be generated only if insmod tuner option tuner_debug enabled. - some cleanups for better reading. - Radio tuner uses high-precision step instead of 62.5 KHz. - Changing radio mode stereo/mono for tea5767 working. *tuner-simple.c: - TNF9533-D/IF UHF fixup. - Radio tuners now uses high-precision step instead of 62.5 KHz. *mt20xx.c: - Radio tuner uses high-precision step instead of 62.5 KHz. *tda9887.c: - tab and blank spaces corrections. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NGerd Knorr <kraxel@bytesex.org> Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
This patch updates maintainer info for BTTV and V4L. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Acked-by: NGerd Knorr <kraxel@bytesex.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Cox 提交于
Anyone reporting a stuck IRQ should try these options. Its effectiveness varies we've found in the Fedora case. Quite a few systems with misdescribed IRQ routing just work when you use irqpoll. It also fixes up the VIA systems although thats now fixed with the VIA quirk (which we could just make default as its what Redmond OS does but Linus didn't like it historically). A small number of systems have jammed IRQ sources or misdescribes that cause an IRQ that we have no handler registered anywhere for. In those cases it doesn't help. Signed-off-by: NAlan Cox <number6@the-village.bc.nu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mingming Cao 提交于
Currently in ext3 block reservation code, the global filesystem reservation tree lock (rsv_block) is hold during the process of searching for a space to make a new reservation window, including while scaning the block bitmap to verify if the avalible window has a free block. Holding the lock during bitmap scan is unnecessary and could possibly cause scalability issue and latency issues. This patch tries to address this by dropping the lock before scan the bitmap. Before that we need to reserve the open window in case someone else is targetting at the same window. Question was should we reserve the whole free reservable space or just the window size we need. Reserve the whole free reservable space will possibly force other threads which intended to do block allocation nearby move to another block group(cause bad layout). In this patch, we just reserve the desired size before drop the lock and scan the block bitmap. This patch fixed a ext3 reservation latency issue seen on a cvs check out test. Patch is tested with many fsx, tiobench, dbench and untar a kernel test. Signed-Off-By: NMingming Cao <cmm@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-