- 07 4月, 2014 3 次提交
-
-
由 Javier Achirica 提交于
Vaio Pro uses a different handle and doesn't support all the options as other models (only S5 setting v/s S3/4/5). Minor code rework to generalize functions by Mattia Dongili. Signed-off-by: NJavier Achirica <jachirica@gmail.com> Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Javier Achirica 提交于
Signed-off-by: NJavier Achirica <jachirica@gmail.com> Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Stefan Seyfried 提交于
Hi all, my panasonic cf-51 does no longer react to the suspend and hibernate keys. I cannot tell when this started since I no longer use the machine on a daily basis, but I suspect it started when userspace switched from using /proc/acpi/event to the input layer, wich was quite some time ago ;-) Today I investigated the issue and found that the firmware simply does not generate any event on "key down" for those keys, but only on "key up". The attached patch works around the problem. Best regards, Stefan -- Stefan Seyfried Linux Consultant & Developer -- GPG Key: 0x731B665B B1 Systems GmbH Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537 >From 7c96fee748cfd3e64732a7ac142f5dea07d7379f Mon Sep 17 00:00:00 2001 From: Stefan Seyfried <seife+kernel@b1-systems.com> Date: Sun, 2 Mar 2014 17:50:01 +0100 Subject: [PATCH] panasonic-laptop: fix sleep keys on CF-51 At least on my CF-51, both sleep and hibernate keys do not generate "key down" events, only "key up". Because of this, the input layer does ignore both keys. The work around is to generate a key down event before the key up. To avoid double events on non-broken firmware, this is only done if no key down is ever seen for those keys. Signed-off-by: NStefan Seyfried <seife+kernel@b1-systems.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
- 06 4月, 2014 18 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull arch/tile updates from Chris Metcalf: "These fix a few stray build issues seen in linux-next, and also add the minimal required support for perf to tilegx" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: remove unused variable 'devcap' tile: Fix vDSO compilation issue with allyesconfig perf tools: Allow building for tile tile/perf: Support perf_events on tilegx and tilepro tile: Enable NMIs on return from handle_nmi() without errors tile: Add support for handling PMC hardware tile: don't use __get_cpu_var() with structure-typed arguments tile: avoid overflow in ns2cycles
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper changes from Mike Snitzer: - Fix dm-cache corruption caused by discard_block_size > cache_block_size - Fix a lock-inversion detected by LOCKDEP in dm-cache - Fix a dangling bio bug in the dm-thinp target's process_deferred_bios error path - Fix corruption due to non-atomic transaction commit which allowed a metadata superblock to be written before all other metadata was successfully written -- this is common to all targets that use the persistent-data library's transaction manager (dm-thinp, dm-cache and dm-era). - Various small cleanups in the DM core - Add the dm-era target which is useful for keeping track of which blocks were written within a user defined period of time called an 'era'. Use cases include tracking changed blocks for backup software, and partially invalidating the contents of a cache to restore cache coherency after rolling back a vendor snapshot. - Improve the on-disk layout of multithreaded writes to the dm-thin-pool by splitting the pool's deferred bio list to be a per-thin device list and then sorting that list using an rb_tree. The subsequent read throughput of the data written via multiple threads improved by ~70%. - Simplify the multipath target's handling of queuing IO by pushing requests back to the request queue rather than queueing the IO internally. * tag 'dm-3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (24 commits) dm cache: fix a lock-inversion dm thin: sort the per thin deferred bios using an rb_tree dm thin: use per thin device deferred bio lists dm thin: simplify pool_is_congested dm thin: fix dangling bio in process_deferred_bios error path dm mpath: print more useful warnings in multipath_message() dm-mpath: do not activate failed paths dm mpath: remove extra nesting in map function dm mpath: remove map_io() dm mpath: reduce memory pressure when requeuing dm mpath: remove process_queued_ios() dm mpath: push back requests instead of queueing dm table: add dm_table_run_md_queue_async dm mpath: do not call pg_init when it is already running dm: use RCU_INIT_POINTER instead of rcu_assign_pointer in __unbind dm: stop using bi_private dm: remove dm_get_mapinfo dm: make dm_table_alloc_md_mempools static dm: take care to copy the space map roots before locking the superblock dm transaction manager: fix corruption due to non-atomic transaction commit ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU upates from Joerg Roedel: "This time a few more updates queued up. - Rework VT-d code to support ACPI devices - Improvements for memory and PCI hotplug support in the VT-d driver - Device-tree support for OMAP IOMMU - Convert OMAP IOMMU to use devm_* interfaces - Fixed PASID support for AMD IOMMU - Other random cleanups and fixes for OMAP, ARM-SMMU and SHMOBILE IOMMU Most of the changes are in the VT-d driver because some rework was necessary for better hotplug and ACPI device support" * tag 'iommu-updates-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (75 commits) iommu/vt-d: Fix error handling in ANDD processing iommu/vt-d: returning free pointer in get_domain_for_dev() iommu/vt-d: Only call dmar_acpi_dev_scope_init() if DRHD units present iommu/vt-d: Check for NULL pointer in dmar_acpi_dev_scope_init() iommu/amd: Fix logic to determine and checking max PASID iommu/vt-d: Include ACPI devices in iommu=pt iommu/vt-d: Finally enable translation for non-PCI devices iommu/vt-d: Remove to_pci_dev() in intel_map_page() iommu/vt-d: Remove pdev from intel_iommu_attach_device() iommu/vt-d: Remove pdev from iommu_no_mapping() iommu/vt-d: Make domain_add_dev_info() take struct device iommu/vt-d: Make domain_remove_one_dev_info() take struct device iommu/vt-d: Rename 'hwdev' variables to 'dev' now that that's the norm iommu/vt-d: Remove some pointless to_pci_dev() calls iommu/vt-d: Make get_valid_domain_for_dev() take struct device iommu/vt-d: Make iommu_should_identity_map() take struct device iommu/vt-d: Handle RMRRs for non-PCI devices iommu/vt-d: Make get_domain_for_dev() take struct device iommu/vt-d: Make domain_context_mapp{ed,ing}() take struct device iommu/vt-d: Make device_to_iommu() cope with non-PCI devices ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
Pull hwmon updates from Jean Delvare: "This includes a number of driver conversions to devm_hwmon_device_register_with_groups, a few cleanups, and support for the ITE IT8623E" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (it87) Add support for IT8623E hwmon: (it87) Fix IT8603E define name hwmon: (lm90) Convert to use hwmon_device_register_with_groups hwmon: (lm90) Create all sysfs groups in one call hwmon: (lm90) Always use the dev variable in the probe function hwmon: (lm90) Create most optional attributes with sysfs_create_group hwmon: Avoid initializing the same field twice hwmon: (pc87360) Avoid initializing the same field twice hwmon: (lm80) Convert to use devm_hwmon_device_register_with_groups hwmon: (adm1021) Convert to use devm_hwmon_device_register_with_groups hwmon: (lm63) Avoid initializing the same field twice hwmon: (lm63) Convert to use devm_hwmon_device_register_with_groups hwmon: (lm63) Create all sysfs groups in one call hwmon: (lm63) Introduce 'dev' variable to point to client->dev hwmon: (lm63) Add additional sysfs group for temp2_type attribute hwmon: (f71805f) Fix author's address
-
git://git.linaro.org/people/mike.turquette/linux由 Linus Torvalds 提交于
Pull clock framework changes from Mike Turquette: "The clock framework changes for 3.15 look similar to past pull requests. Mostly clock driver updates, more Device Tree support in the form of common functions useful across platforms and a handful of features and fixes to the framework core" * tag 'clk-for-linus-3.15' of git://git.linaro.org/people/mike.turquette/linux: (86 commits) clk: shmobile: fix setting paretn clock rate clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1 clk: Fix minor errors in of_clk_init() function comments clk: reverse default clk provider initialization order in of_clk_init() clk: sirf: update copyright years to 2014 clk: mmp: try to use closer one when do round rate clk: mmp: fix the wrong calculation formula clk: mmp: fix wrong mask when calculate denominator clk: st: Adds quadfs clock binding clk: st: Adds clockgen-vcc and clockgen-mux clock binding clk: st: Adds clockgen clock binding clk: st: Adds divmux and prediv clock binding clk: st: Support for A9 MUX clocks clk: st: Support for ClockGenA9/DDR/GPU clk: st: Support for QUADFS inside ClockGenB/C/D/E/F clk: st: Support for VCC-mux and MUX clocks clk: st: Support for PLLs inside ClockGenA(s) clk: st: Support for DIVMUX and PreDiv Clocks clk: support hardware-specific debugfs entries clk: s2mps11: Use of_get_child_by_name ...
-
由 Linus Torvalds 提交于
Merge tag 'pwm/for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "The legacy HAVE_PWM Kconfig symbol is finally being retired. Thanks a lot to Sascha Hauer for doing that. Three new drivers are added: Freescale FTM, Cirrus Logic CLPS711X and Intel Low Power Subsystem. An assortment of fixes and cleanups rounds things off for this release cycle" * tag 'pwm/for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: pxa: Constify OF match table pwm: pxa: Fix typo "pwm" -> "PWM" Revert "pwm: pxa: Use of_match_ptr()" pwm: add support for Intel Low Power Subsystem PWM pwm: Add CLPS711X PWM support pwm: atmel: correct CDTY calculation pwm: atmel: Fix polarity handling Documentation: Add device tree bindings for Freescale FTM PWM. pwm: Add Freescale FTM PWM driver support pwm: pxa: Use of_match_ptr() pwm: samsung: Use SIMPLE_DEV_PM_OPS macro pwm: renesas-tpu: Add dependency on HAS_IOMEM pwm: Remove obsolete HAVE_PWM Kconfig symbol
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC sh driver change from Arnd Bergmann: "The drivers/sh subdirectory used to get merged through the SH architecture tree, but things are in flux there and some of the drivers are shared with ARM shmobile, we have picked it up for the time being. There is only one trivial patch from Laurent Pinchart this time" * tag 'sh-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: sh: intc: Enable driver compilation with COMPILE_TEST
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC device tree changes from Arnd Bergmann: "A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only" * tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits) dts: stmmac: Document the clocks property in the stmmac base document dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. ARM: STi: stih41x: Add support for the FSM Serial Flash Controller ARM: STi: stih416: Add support for the FSM Serial Flash Controller ARM: tegra: fix Dalmore pinctrl configuration ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND ARM: dts: Build all keystone dt blobs ARM: dts: keystone: Fix control register range for clktsip ARM: dts: keystone: Fix domain register range for clkfftc1 ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC board changes from Arnd Bergmann: "As we continue to replace board files with device tree descriptions, this part of the ARM support is getting smaller. We have basically just defconfig changes here this time, and a significant number of Renesas shmobile changes, as Renesas is still in the process of deprecating board file support" * tag 'boards-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits) ARM: enable fhandle in multi_v7_defconfig ARM: tegra: enable fhandle in tegra_defconfig ARM: update multi_v7_defconfig for Tegra ARM: add Marvell Dove and some drivers to multi_v7 defconfig ARM: fix duplicate symbols in multi_v5_defconfig ARM: pxa: add gpio keys information ARM: tegra: defconfig updates ARM: config: keystone: enable AEMIF/NAND support ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig ARM: config: Add mvebu_v5_defconfig ARM: config: Add a multi_v5_defconfig ARM: shmobile: r7s72100: update defconfig for I2C usage ARM: shmobile: Remove Lager DT reference legacy clock bits ARM: shmobile: Remove Koelsch DT reference legacy clock bits ARM: shmobile: Remove KZM9D board code ARM: mvebu: update defconfigs for Armada 375 and 38x ARM: dove: Enable watchdog support in the defconfig ARM: mvebu: Enable watchdog support in defconfig ARM: config: keystone: enable led support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC specific changes from Arnd Bergmann: "Lots of changes specific to one of the SoC families. Some that stick out are: - mach-qcom gains new features, most importantly SMP support for the newer chips (Stephen Boyd, Rohit Vaswani) - mvebu gains support for three new SoCs: Armada 375, 380 and 385 (Thomas Petazzoni and Free-electrons team) - SMP support for Rockchips (Heiko Stübner) - Lots of i.MX changes (Shawn Guo) - Added support for BCM5301x SoC (Hauke Mehrtens) - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn and Sebastian Hesselbarth doing the final part of a long journey) - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd Bergmann)" * tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits) ARM: sunxi: Select HAVE_ARM_ARCH_TIMER ARM: cache-tauros2: remove ARMv6 code ARM: mvebu: don't select CONFIG_NEON ARM: davinci: fix DT booting with default defconfig ARM: configs: bcm_defconfig: enable bcm590xx regulator support ARM: davinci: remove tnetv107x support MAINTAINERS: Update ARM STi maintainers ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE ARM: bcm21664: Add board support. ARM: sunxi: Add the new watchog compatibles to the reboot code ARM: enable ARM_HAS_SG_CHAIN for multiplatform ARM: davinci: remove da8xx_omapl_defconfig ARM: davinci: da8xx: fix multiple watchdog device registration ARM: davinci: add da8xx specific configs to davinci_all_defconfig ARM: davinci: enable da8xx build concurrently with older devices ARM: BCM5301X: workaround suppress fault ARM: BCM5301X: add early debugging support ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU ARM: mach-bcm: Remove GENERIC_TIME ARM: shmobile: APMU: Fix warnings due to improper printk formats ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC non-critical bug fixes from Arnd Bergmann: "Lots of isolated bug fixes that were not found to be important enough to be submitted before the merge window or backported into stable kernels. The vast majority of these came out of Arnd's randconfig testing and just prevents running into build-time bugs in configurations that we do not care about in practice" * tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: at91: fix a typo ARM: moxart: fix CPU selection ARM: tegra: fix board DT pinmux setup ARM: nspire: Fix compiler warning IXP4xx: Fix DMA masks. Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation" IXP4xx: Fix Goramo Multilink GPIO conversion. Revert "ARM: ixp4xx: fix gpio rework" ARM: tegra: make debug_ll code build for ARMv6 ARM: sunxi: fix build for THUMB2_KERNEL ARM: exynos: add missing include of linux/module.h ARM: exynos: fix l2x0 saved regs handling ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK ARM: samsung: select ATAGS where necessary ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic ARM: samsung: allow serial driver to be disabled ARM: s5pv210: enable IDE support in MACH_TORBRECK ARM: s5p64x0: fix building with only one soc type ARM: s3c64xx: select power domains only when used ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1 ...
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM changes from Russell King: - Perf updates from Will Deacon: - Support for Qualcomm Krait processors (run perf on your phone!) - Support for Cortex-A12 (run perf stat on your FPGA!) - Support for perf_sample_event_took, allowing us to automatically decrease the sample rate if we can't handle the PMU interrupts quickly enough (run perf record on your FPGA!). - Basic uprobes support from David Long: This patch series adds basic uprobes support to ARM. It is based on patches developed earlier by Rabin Vincent. That approach of adding hooks into the kprobes instruction parsing code was not well received. This approach separates the ARM instruction parsing code in kprobes out into a separate set of functions which can be used by both kprobes and uprobes. Both kprobes and uprobes then provide their own semantic action tables to process the results of the parsing. - ARMv7M (microcontroller) updates from Uwe Kleine-König - OMAP DMA updates (recently added Vinod's Ack even though they've been sitting in linux-next for a few months) to reduce the reliance of omap-dma on the code in arch/arm. - SA11x0 changes from Dmitry Eremin-Solenikov and Alexander Shiyan - Support for Cortex-A12 CPU - Align support for ARMv6 with ARMv7 so they can cooperate better in a single zImage. - Addition of first AT_HWCAP2 feature bits for ARMv8 crypto support. - Removal of IRQ_DISABLED from various ARM files - Improved efficiency of virt_to_page() for single zImage - Patch from Ulf Hansson to permit runtime PM callbacks to be available for AMBA devices for suspend/resume as well. - Finally kill asm/system.h on ARM. * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (89 commits) dmaengine: omap-dma: more consolidation of CCR register setup dmaengine: omap-dma: move IRQ handling to omap-dma dmaengine: omap-dma: move register read/writes into omap-dma.c ARM: omap: dma: get rid of 'p' allocation and clean up ARM: omap: move dma channel allocation into plat-omap code ARM: omap: dma: get rid of errata global ARM: omap: clean up DMA register accesses ARM: omap: remove almost-const variables ARM: omap: remove references to disable_irq_lch dmaengine: omap-dma: cleanup errata 3.3 handling dmaengine: omap-dma: provide register read/write functions dmaengine: omap-dma: use cached CCR value when enabling DMA dmaengine: omap-dma: move barrier to omap_dma_start_desc() dmaengine: omap-dma: move clnk_ctrl setting to preparation functions dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers dmaengine: omap-dma: consolidate clearing channel status register dmaengine: omap-dma: move CCR buffering disable errata out of the fast path dmaengine: omap-dma: provide register definitions dmaengine: omap-dma: consolidate setup of CCR dmaengine: omap-dma: consolidate setup of CSDP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel由 Linus Torvalds 提交于
Pull Hexagon updates from Richard Kuo: "Mostly cleanups for compilation with allmodconfig and some other miscellaneous fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel: Hexagon: update CR year for elf.h Hexagon: remove SP macro Hexagon: set ELF_EXEC_PAGESIZE to PAGE_SIZE Hexagon: set the e_flags in user regset view for core dumps Hexagon: fix atomic_set Hexagon: add screen_info for VGA_CONSOLE hexagon: correct type on pgd copy smp, hexagon: kill SMP single function call interrupt arch: hexagon: include: asm: add generic macro 'mmiowb' in "io.h" arch: hexagon: kernel: hexagon_ksyms.c: export related symbols which various modules need arch: hexagon: kernel: reset.c: use function pointer instead of function for pm_power_off and export it arch: hexagon: include: asm: add "vga.h" in Kbuild arch: hexagon: include: asm: Kbuild: add generic "serial.h" in Kbuild arch: hexagon: include: uapi: asm: setup.h add swith macro __KERNEL__ arch: hexagon: include: asm: add prefix "hvm[ci]_" for all enum members in "hexagon_vm.h" arch: hexagon: Kconfig: add HAVE_DMA_ATTR in Kconfig and remove "linux/dma-mapping.h" from "asm/dma-mapping.h" arch: hexagon: kernel: add export symbol function __delay() hexagon: include: asm: kgdb: extend DBG_MAX_REG_NUM for "cs0/1" hexagon: kernel: kgdb: include related header for pass compiling. hexagon: kernel: remove useless variables 'dn', 'r' and 'err' in time_init_deferred() in "time.c"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
Pull m68k fixes from Greg Ungerer: "Just a couple of fixes. Clean up compile warnings by using correct types in function args, and clean out the removed CONFIG_MTD_PARTITIONS" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix arg types for outs* functions m68k : Kill CONFIG_MTD_PARTITIONS
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull exynos media updates from Mauro Carvalho Chehab: "These are the remaining patches I have for the merge windows. It basically adds a new sensor and adds the needed DT bits for it to work" * 'topic/exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] s5p-fimc: Remove reference to outdated macro [media] s5p-jpeg: Fix broken indentation in jpeg-regs.h [media] exynos4-is: Add the FIMC-IS ISP capture DMA driver [media] exynos4-is: Add support for asynchronous subdevices registration [media] exynos4-is: Add clock provider for the SCLK_CAM clock outputs [media] exynos4-is: Use external s5k6a3 sensor driver [media] V4L: s5c73m3: Add device tree support [media] V4L: Add driver for s5k6a3 image sensor [media] Documentation: devicetree: Update Samsung FIMC DT binding [media] Documentation: dt: Add binding documentation for S5C73M3 camera [media] Documentation: dt: Add binding documentation for S5K6A3 image sensor
-
- 05 4月, 2014 19 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux由 Linus Torvalds 提交于
Pull fbdev changes from Tomi Valkeinen: "Various fbdev fixes and improvements, but nothing big" * tag 'fbdev-main-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (38 commits) fbdev: Make the switch from generic to native driver less alarming Video: atmel: avoid the id of fix screen info is overwritten video: imxfb: Add DT default contrast control register property. video: atmel_lcdfb: ensure the hardware is initialized with the correct mode fbdev: vesafb: add dev->remove() callback fbdev: efifb: add dev->remove() callback video: pxa3xx-gcu: switch to devres functions video: pxa3xx-gcu: provide an empty .open call video: pxa3xx-gcu: pass around struct device * video: pxa3xx-gcu: rename some symbols sisfb: fix 1280x720 resolution support video: fbdev: uvesafb: Remove impossible code path in uvesafb_init_info video: fbdev: uvesafb: Remove redundant NULL check in uvesafb_remove fbdev: FB_OPENCORES should depend on HAS_DMA OMAPDSS: convert pixel clock to common videomode style OMAPDSS: Remove unused get_context_loss_count support OMAPDSS: use DISPC register to detect context loss video: da8xx-fb: Use "SIMPLE_DEV_PM_OPS" macro video: imxfb: Convert to SIMPLE_DEV_PM_OPS video: imxfb: Resolve mismatch between backlight/contrast ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest由 Linus Torvalds 提交于
Pull single ktest fix from Steven Rostedt: "This just contains a single update by Satoru Takeuchi, which adds CLOSE_CONSOLE_SIGNAL to the kvm.conf file, as the kvm guest requires a different signal than a normal console uses" * tag 'ktest-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Set CLOSE_CONSOLE_SIGNAL in the kvm.conf
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random由 Linus Torvalds 提交于
Pull /dev/random changes from Ted Ts'o: "A number of cleanups plus support for the RDSEED instruction, which will be showing up in Intel Broadwell CPU's" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: Add arch_has_random[_seed]() random: If we have arch_get_random_seed*(), try it before blocking random: Use arch_get_random_seed*() at init time and once a second x86, random: Enable the RDSEED instruction random: use the architectural HWRNG for the SHA's IV in extract_buf() random: clarify bits/bytes in wakeup thresholds random: entropy_bytes is actually bits random: simplify accounting code random: tighten bound on random_read_wakeup_thresh random: forget lock in lockless accounting random: simplify accounting logic random: fix comment on "account" random: simplify loop in random_read random: fix description of get_random_bytes random: fix comment on proc_do_uuid random: fix typos / spelling errors in comments
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Richard Kuo 提交于
The SP/r29 macro wasn't used anywhere else and was causing conflicts with another module, so just remove it. Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Richard Kuo 提交于
Normal writes in our our architecture don't invalidate lock reservations. Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Richard Kuo 提交于
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Ilia Mirkin 提交于
swapper_pg_dir is an array of pgd_t, not pgd_t*. This has no actual effect since sizeof(pgd_t) == sizeof(pgd_t*), but unconfuses tools that check types. Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Jiang Liu 提交于
Commit 9a46ad6d "smp: make smp_call_function_many() use logic similar to smp_call_function_single()" has unified the way to handle single and multiple cross-CPU function calls. Now only one intterupt is needed for architecture specific code to support generic SMP function call interfaces, so kill the redundant single function call interrupt. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shaohua Li <shli@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-hexagon@vger.kernel.org Signed-off-by: NJiang Liu <liuj97@gmail.com> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Chen Gang 提交于
Need dumy mmiowb(), or can not pass compiling, the related error with allmodconfig: CC [M] drivers/mmc/host/sdhci.o drivers/mmc/host/sdhci.c: In function 'sdhci_request': drivers/mmc/host/sdhci.c:1409:2: error: implicit declaration of function 'mmiowb' [-Werror=implicit-function-declaration] Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Chen Gang 提交于
Need export all related functions and symbols for various modules with allmodconfig. The related errors: MODPOST 2879 modules ERROR: "__vmyield" [sound/sound_firmware.ko] undefined! ERROR: "__phys_offset" [sound/drivers/snd-dummy.ko] undefined! ERROR: "ioremap_nocache" [drivers/char/ipmi/ipmi_si.ko] undefined! ERROR: "__iounmap" [drivers/char/ipmi/ipmi_si.ko] undefined! ... For including files, need "linux/*" first, then "asm/*". All related included files and symbols need be sorted by alphabetical order. Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Chen Gang 提交于
arch: hexagon: kernel: reset.c: use function pointer instead of function for pm_power_off and export it 'pm_power_off' is a function pointer, not a function, so need change its type, and also need export it, or can not pass compiling with allmodconfig. The related error: MODPOST 2879 modules ERROR: "pm_power_off" [drivers/char/ipmi/ipmi_poweroff.ko] undefined! Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Chen Gang 提交于
Need include generic "vga.h", or can not pass compiling with allmodconfig, the related error: CC [M] drivers/gpu/drm/drm_irq.o In file included from include/linux/vgaarb.h:34:0, from drivers/gpu/drm/drm_irq.c:42: include/video/vga.h:22:21: fatal error: asm/vga.h: No such file or directory Also move "preempt.h" upper to match sort order. Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Chen Gang 提交于
Add "serial.h" in Kbuild, or can not pass compiling with allmodconfig, the related error: CC [M] drivers/staging/speakup/speakup_acntpc.o In file included from drivers/staging/speakup/speakup_acntpc.c:33:0: drivers/staging/speakup/serialio.h:7:24: fatal error: asm/serial.h: No such file or directory Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Chen Gang 提交于
Define dummy '__init' instead of include "linux/init.h" if !__KERNEL__, or can not pass checking. The related error (with allmodconfig under hexagon): CHECK include/asm (34 files) usr/include/asm/setup.h:22: included file 'linux/init.h' is not exported Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Chen Gang 提交于
Append "hvmc_" or "hvmi_" to all related enum members (which are too common to make conflict with another sub-systems). The related error with allmodconfig: CC [M] drivers/md/raid1.o drivers/md/raid1.c:1440:13: error: 'status' redeclared as different kind of symbol arch/hexagon/include/asm/hexagon_vm.h:76:2: note: previous definition of 'status' was here Also use 'affinity' instead of 'locdis' for __vmintop_affinity(). Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Chen Gang 提交于
arch: hexagon: Kconfig: add HAVE_DMA_ATTR in Kconfig and remove "linux/dma-mapping.h" from "asm/dma-mapping.h" When HAS_DMA, and also need use generic implementation, HAVE_DMA_ATTR must be enabled, or can not pass compiling with allmodconfig, the related error: CC [M] drivers/ata/libata-core.o drivers/ata/libata-core.c: In function 'ata_sg_clean': drivers/ata/libata-core.c:4598:3: error: implicit declaration of function 'dma_unmap_sg' [-Werror=implicit-function-declaration] drivers/ata/libata-core.c: In function 'ata_sg_setup': drivers/ata/libata-core.c:4708:2: error: implicit declaration of function 'dma_map_sg' [-Werror=implicit-function-declaration] "linux/dma-mapping.h" will include "asm/dma-mapping.h", so need remove "linux/dma-mapping.h" from "asm/dma-mapping.h", Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>
-