Pull networking fixes from David Miller:
 "This looks like a lot but it's a mixture of regression fixes as well
  as fixes for longer standing issues.

   1) Fix on-channel cancellation in mac80211, from Johannes Berg.

   2) Handle CHECKSUM_COMPLETE properly in xt_TCPMSS netfilter xtables
      module, from Eric Dumazet.

   3) Avoid infinite loop in UDP SO_REUSEPORT logic, also from Eric
      Dumazet.

   4) Avoid a NULL deref if we try to set SO_REUSEPORT after a socket is
      bound, from Craig Gallek.

   5) GRO key comparisons don't take lightweight tunnels into account,
      from Jesse Gross.

   6) Fix struct pid leak via SCM credentials in AF_UNIX, from Eric
      Dumazet.

   7) We need to set the rtnl_link_ops of ipv6 SIT tunnels before we
      register them, otherwise the NEWLINK netlink message is missing
      the proper attributes.  From Thadeu Lima de Souza Cascardo.

   8) Several Spectrum chip bug fixes for mlxsw switch driver, from Ido
      Schimmel

   9) Handle fragments properly in ipv4 easly socket demux, from Eric
      Dumazet.

  10) Don't ignore the ifindex key specifier on ipv6 output route
      lookups, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (128 commits)
  tcp: avoid cwnd undo after receiving ECN
  irda: fix a potential use-after-free in ircomm_param_request
  net: tg3: avoid uninitialized variable warning
  net: nb8800: avoid uninitialized variable warning
  net: vxge: avoid unused function warnings
  net: bgmac: clarify CONFIG_BCMA dependency
  net: hp100: remove unnecessary #ifdefs
  net: davinci_cpdma: use dma_addr_t for DMA address
  ipv6/udp: use sticky pktinfo egress ifindex on connect()
  ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail()
  netlink: not trim skb for mmaped socket when dump
  vxlan: fix a out of bounds access in __vxlan_find_mac
  net: dsa: mv88e6xxx: fix port VLAN maps
  fib_trie: Fix shift by 32 in fib_table_lookup
  net: moxart: use correct accessors for DMA memory
  ipv4: ipconfig: avoid unused ic_proto_used symbol
  bnxt_en: Fix crash in bnxt_free_tx_skbs() during tx timeout.
  bnxt_en: Exclude rx_drop_pkts hw counter from the stack's rx_dropped counter.
  bnxt_en: Ring free response from close path should use completion ring
  net_sched: drr: check for NULL pointer in drr_dequeue
  ...

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

  API:
   - algif_hash needs to wait for init operations to complete.
   - The has_key setting for shash was always true.

  Algorithms:
   - Add missing selections of CRYPTO_HASH.
   - Fix pkcs7 authentication.

  Drivers:
   - Fix stack alignment bug in chacha20-ssse3.
   - Fix performance regression in caam due to incorrect setting.
   - Fix potential compile-only build failure of stm32"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: atmel-aes - remove calls of clk_prepare() from atomic contexts
  crypto: algif_hash - wait for crypto_ahash_init() to complete
  crypto: shash - Fix has_key setting
  hwrng: stm32 - Fix dependencies for !HAS_IOMEM archs
  crypto: ghash,poly1305 - select CRYPTO_HASH where needed
  crypto: chacha20-ssse3 - Align stack pointer to 64 bytes
  PKCS#7: Don't require SpcSpOpusInfo in Authenticode pkcs7 signatures
  crypto: caam - make write transactions bufferable on PPC platforms

Pull libnvdimm fixes from Dan Williams:
 "1/ Fixes to the libnvdimm 'pfn' device that establishes a reserved
     area for storing a struct page array.

  2/ Fixes for dax operations on a raw block device to prevent pagecache
     collisions with dax mappings.

  3/ A fix for pfn_t usage in vm_insert_mixed that lead to a null
     pointer de-reference.

  These have received build success notification from the kbuild robot
  across 153 configs and pass the latest ndctl tests"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  phys_to_pfn_t: use phys_addr_t
  mm: fix pfn_t to page conversion in vm_insert_mixed
  block: use DAX for partition table reads
  block: revert runtime dax control of the raw block device
  fs, block: force direct-I/O for dax-enabled block devices
  devm_memremap_pages: fix vmem_altmap lifetime + alignment handling
  libnvdimm, pfn: fix restoring memmap location
  libnvdimm: fix mode determination for e820 devices

Pull USB driver fixes from Greg KH:
 "Here are some small USB fixes and new device ids for 4.5-rc2.  Nothing
  major here, full details are in the shortlog, and all of these have
  been in linux-next successfully"

* tag 'usb-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: option: fix Cinterion AHxx enumeration
  USB: mxu11x0: fix memory leak on usb_serial private data
  USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable
  USB: serial: option: Adding support for Telit LE922
  USB: serial: visor: fix crash on detecting device without write_urbs
  USB: visor: fix null-deref at probe
  USB: cp210x: add ID for IAI USB to RS485 adaptor
  usb: hub: do not clear BOS field during reset device
  cdc-acm:exclude Samsung phone 04e8:685d
  usb: cdc-acm: send zero packet for intel 7260 modem
  usb: cdc-acm: handle unlinked urb in acm read callback

Pull tty/serial fixes from Greg KH:
 "Here are some small tty/serial driver fixes for 4.5-rc2.

  They resolve a number of reported problems (the ioctl one specifically
  has been pointed out by numerous people) and one patch adds some new
  device ids for the 8250_pci driver.  All have been in linux-next
  successfully"

* tag 'tty-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_pci: Add Intel Broadwell ports
  staging/speakup: Use tty_ldisc_ref() for paste kworker
  n_tty: Fix unsafe reference to "other" ldisc
  tty: Fix unsafe ldisc reference via ioctl(TIOCGETD)
  tty: Retry failed reopen if tty teardown in-progress
  tty: Wait interruptibly for tty lock on reopen

Pull staging fixes from Greg KH:
 "Here are some small staging driver fixes for 4.5-rc2.

  One of them predated 4.4-final, but I missed that merge window due to
  the holliday.  The others fix reported issues that have come up
  recently.  The tty change is needed for the speakup driver fix and has
  the ack of the tty driver maintainer as well, i.e.  myself :)

  All have been in linux-next with no reported issues"

* tag 'staging-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Staging: speakup: fix read scrolled-back VT
  Staging: speakup: Fix getting port information
  Revert "Staging: panel: usleep_range is preferred over udelay"
  iio: adis_buffer: Fix out-of-bounds memory access

Pull driver core fix from Greg KH:
 "Here's a single driver core fix that resolves an issue a lot of users
  have been hitting for a while now.  It's been tested a lot and has
  been in linux-next successfully for a while"

* tag 'driver-core-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  base/platform: Fix platform drivers with no probe callback

Pull MIPS fix from Ralf Baechle:
 "Just a single revert for a patch which I had upstreamed out of
  sequence"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  Revert "MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function"

Pull x86 fixes from Thomas Gleixner:
 "A bit on the largish side due to a series of fixes for a regression in
  the x86 vector management which was introduced in 4.3.  This work was
  started in December already, but it took some time to fix all corner
  cases and a couple of older bugs in that area which were detected
  while at it

  Aside of that a few platform updates for intel-mid, quark and UV and
  two fixes for in the mm code:
   - Use proper types for pgprot values to avoid truncation
   - Prevent a size truncation in the pageattr code when setting page
     attributes for large mappings"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86/mm/pat: Avoid truncation when converting cpa->numpages to address
  x86/mm: Fix types used in pgprot cacheability flags translations
  x86/platform/quark: Print boundaries correctly
  x86/platform/UV: Remove EFI memmap quirk for UV2+
  x86/platform/intel-mid: Join string and fix SoC name
  x86/platform/intel-mid: Enable 64-bit build
  x86/irq: Plug vector cleanup race
  x86/irq: Call irq_force_move_complete with irq descriptor
  x86/irq: Remove outgoing CPU from vector cleanup mask
  x86/irq: Remove the cpumask allocation from send_cleanup_vector()
  x86/irq: Clear move_in_progress before sending cleanup IPI
  x86/irq: Remove offline cpus from vector cleanup
  x86/irq: Get rid of code duplication
  x86/irq: Copy vectormask instead of an AND operation
  x86/irq: Check vector allocation early
  x86/irq: Reorganize the search in assign_irq_vector
  x86/irq: Reorganize the return path in assign_irq_vector
  x86/irq: Do not use apic_chip_data.old_domain as temporary buffer
  x86/irq: Validate that irq descriptor is still active
  x86/irq: Fix a race in x86_vector_free_irqs()
  ...

Pull timer fixes from Thomas Gleixner:
 "The timer departement delivers:

   - a regression fix for the NTP code along with a proper selftest
   - prevent a spurious timer interrupt in the NOHZ lowres code
   - a fix for user space interfaces returning the remaining time on
     architectures with CONFIG_TIME_LOW_RES=y
   - a few patches to fix COMPILE_TEST fallout"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/nohz: Set the correct expiry when switching to nohz/lowres mode
  clocksource: Fix dependencies for archs w/o HAS_IOMEM
  clocksource: Select CLKSRC_MMIO where needed
  tick/sched: Hide unused oneshot timer code
  kselftests: timers: Add adjtimex SETOFFSET validity tests
  ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO
  itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
  posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
  timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
  hrtimer: Handle remaining time proper for TIME_LOW_RES
  clockevents/tcb_clksrc: Prevent disabling an already disabled clock

Pull scheduler fixes from Thomas Gleixner:
 "Three small fixes in the scheduler/core:

   - use after free in the numa code
   - crash in the numa init code
   - a simple spelling fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  pid: Fix spelling in comments
  sched/numa: Fix use-after-free bug in the task_numa_compare
  sched: Fix crash in sched_init_numa()

Pull perf fixes from Thomas Gleixner:
 "This is much bigger than typical fixes, but Peter found a category of
  races that spurred more fixes and more debugging enhancements.  Work
  started before the merge window, but got finished only now.

  Aside of that this contains the usual small fixes to perf and tools.
  Nothing particular exciting"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
  perf: Remove/simplify lockdep annotation
  perf: Synchronously clean up child events
  perf: Untangle 'owner' confusion
  perf: Add flags argument to perf_remove_from_context()
  perf: Clean up sync_child_event()
  perf: Robustify event->owner usage and SMP ordering
  perf: Fix STATE_EXIT usage
  perf: Update locking order
  perf: Remove __free_event()
  perf/bpf: Convert perf_event_array to use struct file
  perf: Fix NULL deref
  perf/x86: De-obfuscate code
  perf/x86: Fix uninitialized value usage
  perf: Fix race in perf_event_exit_task_context()
  perf: Fix orphan hole
  perf stat: Do not clean event's private stats
  perf hists: Fix HISTC_MEM_DCACHELINE width setting
  perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
  perf tests: Remove wrong semicolon in while loop in CQM test
  perf: Synchronously free aux pages in case of allocation failure
  ...

Pull locking fix from Thomas Gleixner:
 "A single commit, which makes the rtmutex.wait_lock an irq safe lock.

  This prevents a potential deadlock which can be triggered by the rcu
  boosting code from rcu_read_unlock()"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rtmutex: Make wait_lock irq safe

Pull IRQ fixes from Ingo Molnar:
 "Mostly irqchip driver fixes, but also an irq core crash fix and a
  build fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mxs: Add missing set_handle_irq()
  irqchip/atmel-aic: Fix wrong bit operation for IRQ priority
  irqchip/gic-v3-its: Recompute the number of pages on page size change
  base: Export platform_msi_domain_[alloc,free]_irqs
  of: MSI: Simplify irqdomain lookup
  irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED token
  irqchip: Fix dependencies for archs w/o HAS_IOMEM
  irqchip/s3c24xx: Mark init_eint as __maybe_unused
  genirq: Validate action before dereferencing it in handle_irq_event_percpu()

Pull debugobjects fix from Ingo Molnar:
 "Bump up debugobjects pool limit that bigger s390 systems kept running
  into"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Allow bigger number of early boot objects

Pull VFIO fix from Alex Williamson:
 "Use alternate group tracking for no-iommu"

* tag 'vfio-v4.5-rc2' of git://github.com/awilliam/linux-vfio:
  vfio/noiommu: Don't use iommu_present() to track fake groups

Pull i2c fixes from Wolfram Sang:
 "Here are two I2C driver regression fixes.  piix4 gets a larger
  overhaul fixing the latest refactoring and also an older known issue
  as well.  designware-pci gets a fix for a bad merge conflict
  resolution"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: piix4: don't regress on bus names
  i2c: designware-pci: use IRQF_COND_SUSPEND flag
  i2c: piix4: Fully initialize SB800 before it is registered
  i2c: piix4: Fix SB800 locking

A dma_addr_t is potentially smaller than a phys_addr_t on some archs.
Don't truncate the address when doing the pfn conversion.

Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: NMatthew Wilcox <willy@linux.intel.com>
[willy: fix pfn_t_to_phys as well]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

pfn_t_to_page() honors the flags in the pfn_t value to determine if a
pfn is backed by a page.  However, vm_insert_mixed() was originally
written to use pfn_valid() to make this determination.  To restore the
old/correct behavior, ignore the pfn_t flags in the !pfn_t_devmap() case
and fallback to trusting pfn_valid().

Fixes: 01c8f1c4 ("mm, dax, gpu: convert vm_insert_mixed to pfn_t")
Cc: Dave Hansen <dave@sr71.net>
Cc: David Airlie <airlied@linux.ie>
Reported-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Johan Hedberg says:

====================
pull request: bluetooth 2016-01-30

Here's a set of important Bluetooth fixes for the 4.5 kernel:

 - Two fixes to 6LoWPAN code (one fixing a potential crash)
 - Fix LE pairing with devices using both public and random addresses
 - Fix allocation of dynamic LE PSM values
 - Fix missing COMPATIBLE_IOCTL for UART line discipline

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid populating pagecache when the block device is in DAX mode.
Otherwise these page cache entries collide with the fsync/msync
implementation and break data durability guarantees.

Cc: Jan Kara <jack@suse.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Tested-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Dynamically enabling DAX requires that the page cache first be flushed
and invalidated.  This must occur atomically with the change of DAX mode
otherwise we confuse the fsync/msync tracking and violate data
durability guarantees.  Eliminate the possibilty of DAX-disabled to
DAX-enabled transitions for now and revisit this for the next cycle.

Cc: Jan Kara <jack@suse.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Similar to the file I/O path, re-direct all I/O to the DAX path for I/O
to a block-device special file.  Both regular files and device special
files can use the common filp->f_mapping->host lookup to determing is
DAX is enabled.

Otherwise, we confuse the DAX code that does not expect to find live
data in the page cache:

    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 7676 at mm/filemap.c:217
    __delete_from_page_cache+0x9f6/0xb60()
    Modules linked in:
    CPU: 0 PID: 7676 Comm: a.out Not tainted 4.4.0+ #276
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
     00000000ffffffff ffff88006d3f7738 ffffffff82999e2d 0000000000000000
     ffff8800620a0000 ffffffff86473d20 ffff88006d3f7778 ffffffff81352089
     ffffffff81658d36 ffffffff86473d20 00000000000000d9 ffffea0000009d60
    Call Trace:
     [<     inline     >] __dump_stack lib/dump_stack.c:15
     [<ffffffff82999e2d>] dump_stack+0x6f/0xa2 lib/dump_stack.c:50
     [<ffffffff81352089>] warn_slowpath_common+0xd9/0x140 kernel/panic.c:482
     [<ffffffff813522b9>] warn_slowpath_null+0x29/0x30 kernel/panic.c:515
     [<ffffffff81658d36>] __delete_from_page_cache+0x9f6/0xb60 mm/filemap.c:217
     [<ffffffff81658fb2>] delete_from_page_cache+0x112/0x200 mm/filemap.c:244
     [<ffffffff818af369>] __dax_fault+0x859/0x1800 fs/dax.c:487
     [<ffffffff8186f4f6>] blkdev_dax_fault+0x26/0x30 fs/block_dev.c:1730
     [<     inline     >] wp_pfn_shared mm/memory.c:2208
     [<ffffffff816e9145>] do_wp_page+0xc85/0x14f0 mm/memory.c:2307
     [<     inline     >] handle_pte_fault mm/memory.c:3323
     [<     inline     >] __handle_mm_fault mm/memory.c:3417
     [<ffffffff816ecec3>] handle_mm_fault+0x2483/0x4640 mm/memory.c:3446
     [<ffffffff8127eff6>] __do_page_fault+0x376/0x960 arch/x86/mm/fault.c:1238
     [<ffffffff8127f738>] trace_do_page_fault+0xe8/0x420 arch/x86/mm/fault.c:1331
     [<ffffffff812705c4>] do_async_page_fault+0x14/0xd0 arch/x86/kernel/kvm.c:264
     [<ffffffff86338f78>] async_page_fault+0x28/0x30 arch/x86/entry/entry_64.S:986
     [<ffffffff86336c36>] entry_SYSCALL_64_fastpath+0x16/0x7a
    arch/x86/entry/entry_64.S:185
    ---[ end trace dae21e0f85f1f98c ]---

Fixes: 5a023cdb ("block: enable dax for raw block devices")
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Reported-by: NKirill A. Shutemov <kirill@shutemov.name>
Suggested-by: NJan Kara <jack@suse.cz>
Reviewed-by: NJan Kara <jack@suse.cz>
Suggested-by: NMatthew Wilcox <willy@linux.intel.com>
Tested-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

clk_prepare()/clk_unprepare() must not be called within atomic context.

This patch calls clk_prepare() once for all from atmel_aes_probe() and
clk_unprepare() from atmel_aes_remove().

Then calls of clk_prepare_enable()/clk_disable_unprepare() were replaced
by calls of clk_enable()/clk_disable().

Cc: stable@vger.kernel.org
Signed-off-by: NCyrille Pitchen <cyrille.pitchen@atmel.com>
Reported-by: NMatthias Mayr <matthias.mayr@student.kit.edu>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

hash_sendmsg/sendpage() need to wait for the completion
of crypto_ahash_init() otherwise it can cause panic.

Cc: stable@vger.kernel.org
Signed-off-by: NRui Wang <rui.y.wang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Accidentally discovered this typo when I studied this module.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tianhong Ding <dingtianhong@huawei.com>
Cc: Xinwei Hu <huxinwei@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1454119457-11272-1-git-send-email-thunder.leizhen@huawei.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 - Fix 'perf stat' stddev reporting due to mistakenly cleaning event
   private stats (Jiri Olsa)

 - Fix 'perf test CQM' endless loop detected by 'gcc6 -Wmisleading-indentation'
   (Markus Trippelsdorf)

 - Fix behaviour of Shift-Tab when nothing is focussed in the annotate TUI browser,
   detected with gcc6 -Wmisleading-indentation (Markus Trippelsdorf)

 - Fix mem data cacheline hists browser width setting for unresolved
   addresses (Jiri Olsa)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

RFC 4015 section 3.4 says the TCP sender MUST refrain from
reversing the congestion control state when the ACK signals
congestion through the ECN-Echo flag. Currently we may not
always do that when prior_ssthresh is reset upon receiving
ACKs with ECE marks. This patch fixes that.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

self->ctrl_skb is protected by self->spinlock, we should not
access it out of the lock. Move the debugging printk inside.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

to_vmem_altmap() needs to return valid results until
arch_remove_memory() completes.  It also needs to be valid for any pfn
in a section regardless of whether that pfn maps to data.  This escape
was a result of a bug in the unit test.

The signature of this bug is that free_pagetable() fails to retrieve a
vmem_altmap and goes off into the weeds:

 BUG: unable to handle kernel NULL pointer dereference at           (null)
 IP: [<ffffffff811d2629>] get_pfnblock_flags_mask+0x49/0x60
 [..]
 Call Trace:
  [<ffffffff811d3477>] free_hot_cold_page+0x97/0x1d0
  [<ffffffff811d367a>] __free_pages+0x2a/0x40
  [<ffffffff8191e669>] free_pagetable+0x8c/0xd4
  [<ffffffff8191ef4e>] remove_pagetable+0x37a/0x808
  [<ffffffff8191b210>] vmemmap_free+0x10/0x20

Fixes: 4b94ffdc ("x86, mm: introduce vmem_altmap to augment vmemmap_populate()")
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Arnd Bergmann says:

====================
network driver fixes

This is an updated series of fixes for the network device drivers
that showed warnings in ARM randconfig.

Changes since v1 are:

dropped "net: macb: avoid uninitialized variables", already fixed in net-next

dropped "net: fddi/defxx: avoid warning about uninitialized variable
	use", already fixed in net-next

added missing barriers in "net: moxart: use correct accessors for
	DMA memory"

clarified "net: bgmac: clarify CONFIG_BCMA dependency" changelog
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tg3_set_eeprom() function correctly initializes the 'start' variable,
but gcc generates a false warning:

drivers/net/ethernet/broadcom/tg3.c: In function 'tg3_set_eeprom':
drivers/net/ethernet/broadcom/tg3.c:12057:4: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]

I have not come up with a way to restructure the code in a way that
avoids the warning without making it less readable, so this adds an
initialization for the declaration to shut up that warning.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The nb8800_poll() function initializes the 'next' variable in the
loop looking for new input data. We know this will be called at
least once because 'budget' is a guaranteed to be a positive number
when we enter the function, but the compiler doesn't know that
and warns when the variable is used later:

drivers/net/ethernet/aurora/nb8800.c: In function 'nb8800_poll':
drivers/net/ethernet/aurora/nb8800.c:350:21: warning: 'next' may be used uninitialized in this function [-Wmaybe-uninitialized]

Changing the 'while() {}' loop to 'do {} while()' makes it obvious
to the compiler what is going on so it no longer warns.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NMans Rullgard <mans@mansr.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When CONFIG_PCI_MSI is disabled, we get warnings about unused functions
in the vxge driver:

drivers/net/ethernet/neterion/vxge/vxge-main.c:2121:13: warning: 'adaptive_coalesce_tx_interrupts' defined but not used [-Wunused-function]
drivers/net/ethernet/neterion/vxge/vxge-main.c:2149:13: warning: 'adaptive_coalesce_rx_interrupts' defined but not used [-Wunused-function]

We could add another #ifdef here, but it's nicer to avoid those warnings
for good by converting the existing #ifdef to if(IS_ENABLED()), which has
the same effect but provides better compile-time coverage in general,
and lets the compiler understand better when the function is intentionally
unused.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bgmac driver depends on BCMA_HOST_SOC, which is only used
when CONFIG_BCMA is enabled. However, it is a bool option and can
be set when CONFIG_BCMA=m, and then bgmac can be built-in, leading
to an obvious link error:

drivers/built-in.o: In function `bgmac_init':
:(.init.text+0x7f2c): undefined reference to `__bcma_driver_register'
drivers/built-in.o: In function `bgmac_exit':
:(.exit.text+0x110a): undefined reference to `bcma_driver_unregister'

To avoid this case, we need to depend on both BCMA and BCMA_SOC,
as this patch does. I'm also trying to make the dependency more
readable by splitting it into three lines, and adding a COMPILE_TEST
alternative so we can test-build it in all configurations that
support BCMA.

The added dependency on FIXED_PHY addresses a related issue where
we cannot call fixed_phy_register() when CONFIG_FIXED_PHY=m and
CONFIG_BGMAC=y.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Building the hp100 ethernet driver causes warnings when both the PCI
and EISA drivers are disabled:

ethernet/hp/hp100.c: In function 'hp100_module_init':
ethernet/hp/hp100.c:3047:2: warning: label 'out3' defined but not used [-Wunused-label]
ethernet/hp/hp100.c: At top level:
ethernet/hp/hp100.c:2828:13: warning: 'cleanup_dev' defined but not used [-Wunused-function]

We can easily avoid the warnings and make the driver look slightly
nicer by removing the #ifdefs that check for the CONFIG_PCI and
CONFIG_EISA, as all the registration functions are designed to
have no effect when the buses are disabled.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The davinci_cpdma mixes up physical addresses as seen from the CPU
and DMA addresses as seen from a DMA master, since it can operate
on both normal memory or an on-chip buffer. If dma_addr_t is
different from phys_addr_t, this means we get a compile-time warning
about the type mismatch:

ethernet/ti/davinci_cpdma.c: In function 'cpdma_desc_pool_create':
ethernet/ti/davinci_cpdma.c:182:48: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
   pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys,
In file included from ethernet/ti/davinci_cpdma.c:21:0:
dma-mapping.h:398:21: note: expected 'dma_addr_t * {aka long long unsigned int *}' but argument is of type 'phys_addr_t * {aka unsigned int *}'
 static inline void *dma_alloc_coherent(struct device *dev, size_t size,

This slightly restructures the code so the address we use for
mapping RAM into a DMA address is always a dma_addr_t, avoiding
the warning. The code is correct even if both types are 32-bit
because the DMA master in this device only supports 32-bit addressing
anyway, independent of the types that are used.

We still assign this value to pool->phys, and that is wrong if
the driver is ever used with an IOMMU, but that value appears to
be never used, so there is no problem really. I've added a couple
of comments about where we do things that are slightly violating
the API.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
ipv6: fix sticky pktinfo behaviour

Currently:

ip addr add dev eth0 2001:0010::1/64
ip addr add dev eth1 2001:0020::1/64
ping6 -I eth0 2001:0020::2

do not lead to the expected results, i.e. eth1 is used as the
egress interface.

This is due to two related issues in handling sticky pktinfo,
used by ping6 to enforce the device binding:

- ip6_dst_lookup_flow()/ip6_dst_lookup_tail() do not really enforce
flowi6_oif match
- ipv6 udp connect() just ignore flowi6_oif

These patches address each issue individually.

The kernel has never enforced the egress interface specified
via the sticky pktinfo, except briefly between the commits
741a11d9 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set")
and
d46a9d67 ("net: ipv6: Dont add RT6_LOOKUP_F_IFACE flag if saddr set"),
but the ping6 tools was unaffected up to iputils-20100214,
since before it used SO_BINDTODEVICE to enforce the egress
interface.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the egress interface index specified via IPV6_PKTINFO
is ignored by __ip6_datagram_connect(), so that RFC 3542 section 6.7
can be subverted when the user space application calls connect()
before sendmsg().
Fix it by initializing properly flowi6_oif in connect() before
performing the route lookup.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>