- Remove all CVS generated information like e.g. revision IDs from
  drivers/s390 and include/asm-s390 (none present in arch/s390).

- Add newline at end of arch/s390/lib/Makefile to avoid diff message.
Acked-by: NAndreas Herrmann <aherrman@de.ibm.com>
Acked-by: NFrank Pavlic <pavlic@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A couple of updates for the sh-sci serial driver:

	- Update for clock framework on sh.
	- Fix a compile error introduced by some h8300 changes.
	- Add SH7770/SH7780 subtype support.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Prodive a MODALIAS= enviroment variable for devices on the mac-io bus.
Change the buffer length counter to not waste memory by advancing the
pointer for the next string too far.  Tested on an ibook1 with modular
pmac_zilog.
Signed-off-by: NOlaf Hering <olh@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Whoops.

kobject_register failed for hexium HV-PCI6/Orion (-13)
[<c01d3eb6>] kobject_register+0x31/0x47
[<c023a996>] bus_add_driver+0x4a/0xfd
[<c01de3c1>] __pci_register_driver+0x82/0xa4
[<d083400a>] hexium_init_module+0xa/0x47 [hexium_orion]
[<c013bdae>] sys_init_module+0x167b/0x1822
[<c01633f7>] do_sync_read+0xb8/0xf3
[<c0133fa3>] autoremove_wake_function+0x0/0x2d
[<c0145390>] audit_syscall_entry+0x118/0x13f
[<c0106ae2>] do_syscall_trace+0x104/0x14a
[<c0103d21>] syscall_call+0x7/0xb

slashes in kobject names aren't allowed.
Signed-off-by: NDave Jones <davej@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

      Scott Kilau <Scott_Kilau@digi.com>

Digi serial port console doesn't work when baud rates are set higher than
38400.  So the lookup table and code in jsm_neo.c has been modified and
tested.  Please let me have the feed-back.
Signed-off-by: NV.Ananda Krishnan <mansarov@us.ibm.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove event_data_size since it was pointed out in tpm_bios-indexing-
fix.patch that is was ugly and it wasn't actually being used.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixing the sparse warnings on the acpi_os_map_memory calls pointed out by
Randy.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Attempting to insert the tpm modules fails because the tpm_bios file is
missing a license statement.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It generates warnings:

drivers/char/tpm/tpm_bios.c: In function `get_event_name':
drivers/char/tpm/tpm_bios.c:223: warning: cast from pointer to integer of different size
drivers/char/tpm/tpm_bios.c:223: warning: cast from pointer to integer of different size
drivers/char/tpm/tpm_bios.c:223: warning: cast from pointer to integer of different size
drivers/char/tpm/tpm_bios.c:224: warning: cast from pointer to integer of different size
drivers/char/tpm/tpm_bios.c:224: warning: cast from pointer to integer of different size
drivers/char/tpm/tpm_bios.c:224: warning: cast from pointer to integer of different size

and I'm not sure what the code is doing there, but it seems wrong.  We're
using the address of the buffer rather than the contents of it.

The patch adds more nasty typecasting, but I think the whole arrangement could
be done in a more typesafe manner.

Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These functions return ERR_PTR()s on error, not NULL.

Spotted by Randy.

Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Acked-by: NGreg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/char/tpm/tpm_infineon.c:443: warning: format '%04x' expects type 'unsigned int', but argument 4 has type 'long unsigned int'
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

At the 2.6.12 timeframe ipmi_si_intf.c was patched to provide default
register spacings in try_init_acpi() if the register spacing was set to
zero, similar to code in other routines.

Unfortunately, another patch was simultaneously added that exits early from
try_init_acpi() if the register spacings are set to zero, circumventing the
new defaults.  This patch removes the early exit code and some incorrect
comments that aren't present in other common code snippets.
Signed-off-by: NRocky Craig <rocky.craig@hp.com>
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

priv->eeprom is a pointer.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NYi Zhu <yi.zhu@intel.com>
Cc: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/md/dm-table.c:500: warning: comparison of distinct pointer types lacks a cast
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The snapshot and origin targets are incapable of handling barriers and need to
indicate this.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Record I/O timing statistics

The start time is added to struct dm_io, an existing structure allocated
privately internally within dm and attached to each incoming bio.

We export disk_round_stats() from block/ll_rw_blk.c instead of creating a
private clone.
Signed-off-by: NJun'ichi "Nick" Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Record basic I/O statistics for mapped devices.
Signed-off-by: NKevin Corry <kevcorry@us.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reduce substantially the amount of code using PF_MEMALLOC, as envisaged in the
original FIXME.

If you're using lvm2, for this patch to work correctly you should update to
lvm2 version 2.02.01 or later and device-mapper version 1.02.02 or later.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up the code responsible for the on-disk mirror logs by using the
set_le_bit test_le_bit functions of ext2.  That makes the BE machines keep the
bitmap internally in LE order - it does mean you can't use any other type of
operations on the bitmap words but that looks to be OK in this instance.  The
efficiency tradeoff is very minimal as you would expect for something that
ext2 uses.

This allows us to remove bits_to_core(), bits_to_disk() and log->disk_bits.

Also increment the mirror log disk version transparently to avoid sharing with
older kernels that suffered from the 64-bit BE bug.
Signed-off-by: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move snapshot metadata loading to happen when the table is created instead of
when the device is resumed.  Writes to the origin device don't trigger
exceptions until each snapshot table becomes active when resume() is called on
each snapshot.

If you're using lvm2, for this patch to work properly you should update to
lvm2 version 2.02.01 or later and device-mapper version 1.02.02 or later.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's not used. Fix the following on alpha-eb66 as a side effect:

In file included from drivers/net/lp486e.c:75:
include/asm/io.h:20:1: warning: "SLOW_DOWN_IO" redefined
drivers/net/lp486e.c:59:1: warning: this is the location of the previous definition
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Kernel 2.6.16-rc1 broke the ide-scsi driver: ide-scsi loads but fails to
find any devices to bind to.  It also triggers a message "Driver 'ide-scsi'
needs updating - please use bus_type methods" from the driver core.

The IDE core in 2.6.16-rc1 changed the location of an IDE driver's
->probe()/->remove()/->shutdown() methods: they are now in the ide_driver_t
struct not in the gen_driver sub-struct.  drivers/ide/ was updated for this
change but ide-scsi.c wasn't.  Hence the breakage.

This patch repairs ide-scsi and also eliminates the driver core warning.
Signed-off-by: NMikael Pettersson <mikpe@csd.uu.se>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Acked-by: NBartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Richard Knutsson <ricknu-0@student.ltu.se> did the original pci_module_init()
cleanups:

    http://marc.theaimsgroup.com/?l=linux-kernel&m=113330872125068&w=2
    http://marc.theaimsgroup.com/?l=linux-kernel&m=113330888507321&w=2

Greg, on it's way upstream, pci_module_init() return sneaked back in for
cyblafb?

    http://marc.theaimsgroup.com/?l=linux-pci&m=113652969209562&w=2
    http://marc.theaimsgroup.com/?l=linux-pci&m=113683930220421&w=2

Remove for good.
Signed-off-by: NArthur Othieno <apgo@patchbomb.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Error checking is scattered through various layers of the dlpar code,
leading to a somewhat opaque code structure. This patch consolidates
error checking in one routine, simplifying the code a tad. There's
also some whitespace cleanup here too.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Minor cleanup. Move structure initializer to bottom of file,
this allows elimination of eyeball-strain-inducing forward
declarations.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Minor cleanup. Add the prefix rpaphp_* to several generic-sounding routines.
Remove rpaphp_remove_slot(), which is a one-liner.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove general baroqueness.  The function rpaphp_enable_pci_slot()
has a fairly simple logic structure, once all of the debug printk's
are removed. Its called from only one place, and that place also
has a very simple structure once he printk's are removed.  Merge
the two together.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove general baroqueness.  The function rpaphp_unconfig_pci_adapter()
is really just three lines of code, once all the dbg printks are removed.
And its called in only one place. So replace the call by the thre lines.
Also, provide proper semaphore locking in the affected function
disable_slot()
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function rpaphp_eeh_remove_bus_device() is a dupe of
eeh_remove_bus_device(). Remove it.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove general baroqueness.  The function rpaphp_config_pci_adapter()
is really just one line of code, once all the dbg printks are removed.
And its called in only one place. So replace the call by the one line.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function rpaphp_fixup_new_pci_devices() has been migrated to
pcibios_fixup_new_pci_devices() in
arch/powerpc/platforms/pseries/pci_dlpar.c
This patch removes the old version.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function rpaphp_find_pci_bus() has been migrated to
pcibios_find_pci_bus() in arch/powerpc/platforms/pseries/pci_dlpar.c
This patch removes the old version.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes the AMD POGO errata on the hotplug controller where the
platform will lock up or reboot if PERR/SERR generation is enabled and a
slot is sent an enable command.  This fix disables PERR/SERR generation
before a slot is sent the enable command by first saving related
registers, turning off SERR/PERR generation, enabling the slot, then
restoring the registers.
Signed-off-by: NDavid Keck <david.keck@amd.com>
Cc: Kristen Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Removing and then adding a PCI slot to a running partition results in
a kernel panic. The current code attempts to add iospace for an entire
root bus, which is inappropriate, and silently fails.  When a pci device
tries to use the iospace, a page fault is taken, as the iospace had not
been mapped, and of course the page fault cannot be resolved.

This only occurs for PCI adapters using pio, which may be why it hadn't
been seen earlier (this seems to have been broken for a while).
This patch has survived testing of dozens of slot add and removes.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Acked-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The RPAPHP hoplug driver will not build as a module, because it calls
on pci_claim_resource(), which is not exported. This exports the symbol.
Problem reported by Olaf Hering <olh@suse.de>

A grep indicates that building drivers/parisc/lba_pci.c
would have trouble building as a module for the same reason.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove reference to pcihpfs that no longer exists.
Signed-off-by: NPavel Machek <pavel@suse.cz>

Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I missed this usage in drivers/pci/msi.h:

#ifdef CONFIG_SMP
#define set_msi_irq_affinity    set_msi_affinity
#else
#define set_msi_irq_affinity    NULL
#endif

set_msi_affinity() is declared and exclusively used in msi.c.
Here's a better way so (hopefully) history doesn't repeat itself.
Signed-off-by: NGrant Grundler <iod00d@hp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch #if 0's the unused global function pci_find_ext_capability().
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>