- 23 9月, 2006 40 次提交
-
-
由 Takashi Iwai 提交于
Fixed mic input with STAC92xx codecs. The mic pin was sometimes set to OUTPUT by the headphone jack detection. Also, try to assign a secondary mic as front-mic (or vice versa) in the auto-detection if possible. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Josef 'Jeff' Sipek 提交于
mixart: Use SEEK_{SET,CUR,END} instead of hardcoded values Signed-off-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Josef 'Jeff' Sipek 提交于
gus: Use SEEK_{SET,CUR,END} instead of hardcoded values Signed-off-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Josef 'Jeff' Sipek 提交于
opl4: Use SEEK_{SET,CUR,END} instead of hardcoded values Signed-off-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Josef 'Jeff' Sipek 提交于
sound core: Use SEEK_{SET,CUR,END} instead of hardcoded values Signed-off-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Some machines have multiple headpohne pins (usually on the lpatop and on the docking station) while the current hda-codec driver assumes a single headphone pin. Now it supports multiple hp pins (at least for detection). The sigmatel 92xx code supports this new multiple hp pins. It detects all hp pins for auto-muting, too. Also, the driver checks speaker pins in addition. In some cases, all line-out, speaker and hp-pins coexist. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Nicolas Graziano 提交于
If I understand the hda_intel code, for format > 20bit it only advertise the SNDRV_PCM_FMTBIT_S32_LE format and play it at 32 bit, 20 bit or 24 bit. But if the 20bit and 24bit are available, actually it prefer the 20bit format. This path is to prefer the 24bit format instead of 20bit. Signed-off-by: NNicolas Graziano <nicolas.graziano@wanadoo.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added string entries for Motorola and Conexant vendor ids. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the device id for Motorola si3054-compatible modem codec on a Gateway laptop. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the missing 32bit-compat ioctl entries for ALSA control API (espcially for recent additions of TLV stuff). Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fixed Oops when conflictin with aoa driver due to lack of i2c initialization. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Johannes Berg 提交于
Looks like I completely forgot to do this. This patch adds locking to the tas codec so two userspace programs can't hit the controls at the same time. Tested on my powerbook, but I obviously can't find any problems even without it since it doesn't do SMP. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fixed suspend/resume with MSI enablement. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Remove IPGA volume controls and merge the IPGA range to ADC volume controls. These two volumes are not really independent but connected simply in different ranges 0-0x7f and 0x80-max. It doesn't make sense to provide two controls. Since both 0x7f and 0x80 specify 0dB, a hack is needed for IPGA range to skip 0x80 (increment one) for such controls. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Liam Girdwood 提交于
This patch fixes a build error (introduced by me) in ac97_patch.c wrt WM9705 touchscreen. o Removed spurious '3D' from character after |= operation (0x3D is ASCII for '=') Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Assign the SPDIF always to the secondary device (dev#1) to keep the same configuration. Move the optional capture device to the third device (dev#2). hda_intel now just ignores the NULL entries in the pcm arrays from codecs. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix the order to call pci_disable_msi() to be after free_irq(). (Otherwise pci_disable_msi() bugs you.) Also, added a description of disable_msi option to documentation. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the support for LG LW25 laptop with ALC880 codec. It's the same codec model as LG LW20 (model=lg-lw). Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
This patch adds a new attribute, pcm_class, to each PCM sysfs entry. It's useful to detect what kind of PCM stream is, for example, HAL can check whether it's a modem or not. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
This patch addes the support of the independent 'Headphone' volume control to the generic codec parser. Some codecs (e.g. Conexant) have separate connections to the headphone and the independent amp adjustment is needed. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Richard Fish 提交于
This patch adds LFE mixer controls for laptops with a stac9200 and a mono speaker pin with amplifier. Signed-off-by: NRichard Fish <bigfish@asmallpond.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB information to ESS Solo (es1938) driver. The new compound dB range TLVs are used for non-linear native volume controls. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the definition of TLV dB range compound. It contains one or more dB-range or linear-volume TLV entries with min/max ranges. Used for volume controls with non-linear curves. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fixed the auto-updating of firmware if the breakout box was switched off/on. The firmware binary itself was already cached but it wasn't loaded properly. Also, request_firmware() is issued if the box was with firmware at module loading time but later it's erased. The auto-update is triggered at each PCM action (open, prepare, etc) and at opening proc files. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Krzysztof Helt 提交于
The dbri driver hangs when used in kernel compiled with SMP support due to inproper locking. The patch fixes it. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Ville Syrjala 提交于
Fix maestro2 hardware volume control. Tested on a Dell Inspiron 7000. Signed-off-by: NVille Syrjala <syrjala@sci.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Ville Syrjala 提交于
AD1819 volume registers can hold extra bits which do not affect the actual volume. Add a res_table to the codec patch to fix the problem. PCM, line and mic volume were tested. Signed-off-by: NVille Syrjala <syrjala@sci.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Tobin Davis 提交于
This patch renames the 965_2112 function ids to 965_3ST, and adds functional support for 965_5ST (5 stack 7.1 surround). Signed-off-by: NTobin Davis <tdavis@dsl-only.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB scale information to mixart driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Andreas Schwab 提交于
When booting with line out or headphone plugged, you won't hear anything. The problem is that after reset all channels are muted, but the actual value of the gpio port doesn't exactly match the active_val settings as expected by check_audio_gpio. For example, the line_mute port is set to 7, but check_audio_gpio would expect 0xd or 0xf, thus its return value indicates that it is not active, even though it is. AFAICS only looking at the low bit is enough to determine whether the port is active. Signed-off-by: NAndreas Schwab <schwab@suse.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Pavel Machek 提交于
Cleanup whitespace. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Removed volatile from the position buffer pointer. Also, use synchronize_irq() instead of unreliable msleep(1) in the driver remove callback. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB scale information to each board support code of ice1724 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB scale information for native digital volumes of ice1712 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
- Clean up the code in AK4xxx-ADDA i2c code. - Fix capture gain controls for AK5365 - Changed the static table for DAC/ADC mixer labels to use structs - Implemented TLV entries for each AK codec The volumes in AK4524, AK4528 and AK5365 are corrected with a table to be suitable for dB conversion. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the missing dB scale information for Mic volume to vxpocket driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Luke Ross 提交于
There's at least one USB audio chipset out there which supports only one non-standard rate (ID 0e6a:0310 supports 46875Hz). There's a few other patches for this card which are unsatisfactory because they attempt to map this rate to 44.1k leading to sound distortion. The patch below uses SNDRV_PCM_RATE_KNOT to properly support the non-standard rates where they are available. Signed-off-by: NLuke Ross <luke@lukeross.name> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Andrey Liakhovets 提交于
Fix the bad sound quality on VIA EPIA system using VIA VT1617A (ALSA bug#2381). Signed-off-by: NAndrey Liakhovets <liakh@dol.ru> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the linear volume TLV entries for YMFPCI native volume controls. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the definition of linear volume TLV type. Some DSP chips and codecs (e.g. AK codec) use linear volume control. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-