... which I've found on a Sapphire X550 (Silent).
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndreas Herrmann <aherrman@arcor.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (21 commits)
  libata: bump transfer chunk size if it's odd
  libata: Return proper ATA INT status in pata_bf54x driver
  pata_ali: trim trailing whitespace (fix checkpatch complaints)
  pata_isapnp: Polled devices
  pata_hpt37x: Fix cable detect bug spotted by Sergei
  pata_ali: Lots of problems still showing up with small ATAPI DMA
  pata_ali: Add Mitac 8317 and derivatives
  libata-core: List more documentation sources for reference
  ata_piix: Invalid use of writel/readl with iomap
  sata_sil24: fix sg table sizing
  pata_jmicron: fix disabled port handling in jmicron_pre_reset()
  pata_sil680: kill bogus reset code (take 2)
  ata_piix: port enable for the first SATA controller of ICH8 is 0xf not 0x3
  ata_piix: only enable the first port on apple macbook pro
  ata_piix: reorganize controller IDs
  pata_sis.c: Add Packard Bell EasyNote K5305 to laptops
  libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs
  libata: use ATA_HORKAGE_STUCK_ERR for ATAPI tape drives
  libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  libata: remove unused functions
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  virtio: fix net driver loop case where we fail to restart
  module: fix and elaborate comments
  virtio: fix module/device unloading
  lguest: Fix uninitialized members in example launcher

The mail service for the mac.linux-m68k.org domain is defunct.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Amiga zorro bus: Add missing zorro_device_remove(). Without this ifconfig and
/proc/net/dev oops after unloading a Zorro network device driver module.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

m68k: export atari_keyb_init

This patch fixes the following build error:

  ..
    MODPOST 25 modules
  ERROR: "atari_keyb_init" [drivers/input/mouse/atarimouse.ko] undefined!
  ERROR: "atari_keyb_init" [drivers/input/keyboard/atakbd.ko] undefined!
  make[2]: *** [__modpost] Error 1
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (39 commits)
  ACPI: EC: Workaround for optimized controllers (version 3)
  ACPI: EC: use printk_ratelimit(), add some DEBUG mode messages
  Revert "ACPI: EC: Workaround for optimized controllers"
  ACPI: fix two IRQ8 issues in IOAPIC mode
  ACPI: Add missing spaces to printk format
  cpuidle: fix HP nx6125 regression
  cpuidle: add sched_clock_idle_[sleep|wakeup]_event() hooks
  cpuidle: fix C3 for no bus-master control case
  ACPI: thinkpad-acpi: fix oops when a module parameter has no value
  Revert "Fix very high interrupt rate for IRQ8 (rtc) unless pnpacpi=off"
  ACPI: EC: Don't init EC early if it has no _INI
  Revert "acpi: make ACPI_PROCFS default to y"
  Revert "ACPI: add documentation for deprecated /proc/acpi/battery in ACPI_PROCFS"
  ACPI: Split out control for /proc/acpi entries from battery, ac, and sbs.
  ACPI: Video: Increase buffer size for writes to brightness proc file.
  ACPI: EC: Workaround for optimized controllers
  ACPI: SBS: Fix retval warning
  ACPI: Enable MSR (FixedHW) support for T-States
  ACPI: Get throttling info from BIOS only after evaluating _PDC
  ACPI: Use _TSS for throttling control, when present. Add error checks.
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] cio: Register/unregister subchannels only from kslowcrw.
  [S390] Add missing die_notifier() call to die().
  [S390] Fix memory detection.
  [S390] Explicitly code allocpercpu calls in iucv
  [S390] Dont overwrite lowcores on smp_send_stop().
  [S390] Optimize storage key handling for anonymous pages
  [S390] Fix kernel preemption.
  [S390] appldata: remove unused binary sysctls.
  [S390] cmm: remove unused binary sysctls.
  [S390] Fix irq tracing and lockdep_sys_exit calls.
  [S390] magic sysrq: check for in_atomic before doing an console_unblank
  [S390] cio: change device sense procedure to work with pav aliases

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (27 commits)
  [POWERPC] 83xx: Update mpc8349emitx(gp) defconfig for USB
  [POWERPC] 83xx: Update mpc832x_rdb_defconfig to enable MMC-over-SPI
  [POWERPC] 83xx: MPC832x RDB - remove spidev stub, use mmc_spi
  [POWERPC] 8xxx: MDS board RTC fixes
  [POWERPC] Fix 8xx build breakage due to _tlbie changes
  [POWERPC] Fix device tree interrupt map for Freescale ULI1575 boards
  [POWERPC] Fix possible division by zero in scaled time accounting
  [POWERPC] spufs: Fix context destroy vs /spu readdir race
  [POWERPC] Fix RTAS os-term usage on kernel panic
  [POWERPC] 83xx: Handle mpc8360 rev. 2.1 RGMII timing erratum
  [POWERPC] Document rgmii-rxid and rgmii-txid phy-connection-types
  [POWERPC] 83xx: Fix 2nd UCC entry in mpc832x_mds.dts
  [POWERPC] 83xx: mpc832x mds: Fix board PHY reset code
  [POWERPC] Fix potential NULL dereference
  [POWERPC] vdso: Fixes for cache block sizes
  [POWERPC] pasemi: Don't reset mpic at boot
  [POWERPC] Fix kmalloc alignment on non-coherent DMA platforms
  [POWERPC] Fix build failure on legacy iSeries
  [POWERPC] 4xx: Use virtual PVR value to init FPU on arch/ppc 440EP
  [POWERPC] 4xx: UIC add mask_ack callback
  ...

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9416Signed-off-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] vpe: Add missing "space"
  [MIPS] Compliment va_start() with va_end().
  [MIPS] IP22: Fix broken eeprom access by using __raw_readl/__raw_writel
  [MIPS] IP22: Fix broken EISA interrupt setup by switching to generic i8259
  [MIPS] 64-bit Sibyte kernels need DMA32.
  [MIPS] Only build r4k clocksource for systems that work ok with it.
  [MIPS] Handle R4000/R4400 mfc0 from count register.
  [MIPS] Fix possible hang in LL/SC futex loops.
  [MIPS] Fix context DSP context / TLS pointer switching bug for new threads.
  [MIPS] IP32: More interrupt renumbering fixes.
  [MIPS] time: MIPSsim's plat_time_init doesn't need to be irq safe.
  [MIPS] time: Fix negated condition in cevt-r4k driver.
  [MIPS] Fix pcspeaker build.

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] version 1.0.15
  [ALSA] emu10k1 - Check value ranges in ctl callbacks
  [ALSA] emu10k1: Add mixer controls parameter checking.
  [ALSA] fix private data pointer calculation in CS4270 driver
  [ALSA] portman2x4 - Fix probe error
  [ALSA] ca0106 - Fix write proc assignment
  [ALSA] s3c2443-ac97: compilation fix
  [ALSA] hda-codec - Revert volume knob controls in STAC codecs
  [ALSA] ca0106 - Check value range in ctl callbacks
  [ALSA] hda-codec - Check PINCAP only for PIN widgets
  [ALSA] mpu401: fix recursive locking in timer
  [ALSA] cmipci: fix FLINKON/OFF bits
  [ALSA] hda-codec - Disable shared stream on AD1986A

For a kernel built with "make ARCH=x86" the following system
information is displayed when running the new kernel

    $ uname -m
    x86

On some i386 systems (e.g. K7) we even have the following information

    $ uname -m
    x66

This is weird. The usual information for "uname -m" should be "x86_64"
on 64-bit and "i386" or "i686" on 32-bit.

This patch fixes the issue by setting UTS_MACHINE to "i386" for 32-bit
kernel builds and to "x86_64" for 64-bit kernel builds. I.e., "x86"
won't be used for UTS_MACHINE anymore.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndreas Herrmann <aherrman@arcor.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Sibyte SOCs only have 32-bit PCI.  Due to the sparse use of the address
space only the first 1GB of memory is mapped at physical addresses
below 1GB.  If a system has more than 1GB of memory 32-bit DMA will
not be able to reach all of it.

For now this patch is good enough to keep Sibyte users happy but it seems
eventually something like swiotlb will be needed for Sibyte.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In particular as-is it's not suited for multicore and mutiprocessors
systems where there is on guarantee that the counter are synchronized
or running from the same clock at all.  This broke Sibyte and probably
others since the "[MIPS] Handle R4000/R4400 mfc0 from count register."
commit.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The R4000 and R4400 have an errata where if the cp0 count register is read
in the exact moment when it matches the compare register no interrupt will
be generated.

This bug may be triggered if the cp0 count register is being used as
clocksource and the compare interrupt as clockevent.  So a simple
workaround is to avoid using the compare for both facilities on the
affected CPUs.

This is different from the workaround suggested in the old errata documents;
at some opportunity probably the official version should be implemented
and tested.  Another thing to find out is which processor versions
exactly are affected.  I only have errata documents upto R4400 V3.0
available so for the moment the code treats all R4000 and R4400 as broken.

This is potencially a problem for some machines that have no other decent
clocksource available; this workaround will cause them to fall back to
another clocksource, worst case the "jiffies" source.

The LL / SC loops in __futex_atomic_op() have the usual fixups necessary
for memory acccesses to userspace from kernel space installed:

        __asm__ __volatile__(
        "       .set    push                            \n"
        "       .set    noat                            \n"
        "       .set    mips3                           \n"
        "1:     ll      %1, %4  # __futex_atomic_op     \n"
        "       .set    mips0                           \n"
        "       " insn  "                               \n"
        "       .set    mips3                           \n"
        "2:     sc      $1, %2                          \n"
        "       beqz    $1, 1b                          \n"
        __WEAK_LLSC_MB
        "3:                                             \n"
        "       .set    pop                             \n"
        "       .set    mips0                           \n"
        "       .section .fixup,\"ax\"                  \n"
        "4:     li      %0, %6                          \n"
        "       j       2b                              \n"	<-----
        "       .previous                               \n"
        "       .section __ex_table,\"a\"               \n"
        "       "__UA_ADDR "\t1b, 4b                    \n"
        "       "__UA_ADDR "\t2b, 4b                    \n"
        "       .previous                               \n"
        : "=r" (ret), "=&r" (oldval), "=R" (*uaddr)
        : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT)
        : "memory");

The branch at the end of the fixup code, it goes back to the SC
instruction, no matter if the fault was first taken by the LL or SC
instruction resulting in an endless loop which will only terminate if
the address become valid again due to another thread setting up an
accessible mapping and the CPU happens to execute the SC instruction
successfully which due to the preceeding ERET instruction of the fault
handler would only happen if UNPREDICTABLE instruction behaviour of the
SC instruction without a preceeding LL happens to favor that outcome.
But normally processes are nice, pass valid arguments and we were just
getting away with this.

Thanks to Kaz Kylheku <kaz@zeugmasystems.com> for providing the original
report and a test case.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A new born thread starts execution not in schedule but rather in
ret_from_fork which results in it bypassing the part of the code to
load a new context written in C which are the DSP context and the
userlocal register which Linux uses for the TLS pointer.  Frequently
we were just getting away with this bug for a number of reasons:

 o Real world application scenarios are very unlikely to use clone or fork
   in blocks of DSP code.
 o Linux by default runs the child process right after the fork, so the
   child by luck will find all the right context in the DSP and userlocal
   registers.
 o So far the rdhwr instruction was emulated on all hardware so userlocal
   wasn't getting referenced at all and the emulation wasn't suffering
   from the issue since it gets it's value straight from the thread's
   thread_info.

Fixed by moving the code to load the context from switch_to() to
finish_arch_switch which will be called by newborn and old threads.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It's running early during the bootup process so interrupts are still off.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

None of the drives I have follows what the standard says about
transfer chunk size.  Of the four SATA and six PATA ATAPI devices
tested, four ignore transfer chunk size completely and the ones which
honor it don't behave according to the spec when it's odd.

According to the spec, transfer chunk size can be odd if the amount of
data to transfer equals or is smaller than the chunk size and the
device can indicate the same odd number and transfer the whole thing
at one go with a pad byte appended.  However, in reality, none of the
drives I have does that.  They all indicate and transfer even number
of bytes one byte shorter than the chunk size first; then indicate and
transfer two bytes, which is clearly out of spec.

In addition to unnecessary second PIO data phase, this also creates a
weird problem when combined with SATA controllers which perform PIO
via DMA.  Some of these controllers use actualy number of bytes
received to update DMA pointer so chunks which are sized 4n + 2 makes
DMA pointer off by two bytes.  This causes data corruption and buffer
overruns.

This patch rounds nbytes up to the nearest even number such that ATAPI
devices don't split data transfer for the last odd byte.  This
shouldn't confuse controllers which depend on transfer chunk size as
devices will report the rounded-up number, actually transfer that much
and padding buffer is there to receive them.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

INT status can be OR.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

If a card has no IRQ then pass no interrupt handler but allow polled
usage.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Hopefully there is a better long term solution but for now lets favour
reliability.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

And next time I'll be able to find the ata tape spec easily...
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Should use ioread* as discussed previously
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

sil24 unnecessarily used LIBATA_MAX_PRD and ATAPI sg table was short
by one entry which might cause very obscure problems.  This patch
updates sg table sizing such that

* One full page is used for PRB + sg table.  On 4k page,
  this results in 253 sg's.

* Make ATAPI sg block properly sized.

* Make build fail if command block size doesn't equal PAGE_SIZE.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

There are two bugs in disabled port handling.

* test in PORT_PATA0 is reversed
* ->prereset should return -ENOENT for disabled ports not 0

The first bug makes the PATA channel considered disabled but the
second bug saves the day by returning 0.  The net result is that cable
is always left at ATA_CBL_UNKNOWN.  This results in false 80c
configuration and thus transfer errors.

This patch fixes both bugs.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Since writing to two reserved bits ain't much of a housekeeping, I think it's
time we get rid of the custom error handler in this driver. ;-)
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Conflicts:

	drivers/acpi/ec.c
Signed-off-by: NLen Brown <len.brown@intel.com>

Some controllers fail to send confirmation GPE after address or data write.
Detect this and don't expect such confirmation in future.
This is a generalization of previous workaround
(66c5f4e7), which did only read address.

Reference: http://bugzilla.kernel.org/show_bug.cgi?id=9327Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Tested-by: NRomano Giannetti <romano.giannetti@gmail.com>
Tested-by: Mats Johannesson
Signed-off-by: NLen Brown <len.brown@intel.com>