- 29 9月, 2006 40 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/hwmon-2.6: (39 commits) hwmon: Remove Yuan Mu's address hwmon: Fix unchecked return status, SMSC chips hwmon: Fix unchecked return status, batch 6 w83792d: Fix unchecked return status w83l785ts: Fix unchecked return status w83781d: Fix unchecked return status vt8231: Fix unchecked return status Fix unchecked return status, batch 5 hwmon: Fix unchecked return status, batch 4 hwmon: Fix unchecked return status, batch 3 hwmon: Fix unchecked return status, batch 2 w83627ehf: Fix unchecked return status pc87360: Check for error on sysfs files creation pc87360: Delete sysfs files on device deletion pc87360: Move some code around hwmon: Fix unchecked return status, batch 1 vt1211: Document module parameters vt1211: Add documentation hwmon: New driver for the VIA VT1211 w83791d: Documentation update ...
-
由 Alan Stern 提交于
Strictly speaking, the Valid bit in SCSI sense data is supposed to be set only when the Information field contains a valid number. This patch (as793) turns off the Valid bit when the Information field hasn't been set. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as791b) fixes things up to avoid compiler warnings or errors when CONFIG_USB_SUSPEND or CONFIG_PM isn't set. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as790b) adds "autostop" support to ohci-hcd: the driver will automatically stop the host controller when no devices have been connected for at least one second. This feature is useful when the USB autosuspend facility isn't available, such as when CONFIG_USB_SUSPEND hasn't been set. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
The autosuspend technique used by ohci-hcd doesn't mesh well with the newer USB core autosuspend code. This patch (as789) removes ohci-hcd's autosuspend support. Now the driver will be usable, but it won't automatically go into a low-power state when no devices are connected. That's for a later patch. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
Originally I didn't think any host controller driver would ever use interrupts and polling at the same time, but it turns out ohci-hcd wants to do exactly that. This patch (as788) makes it possible. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as792) fixes "ignoring return value" warnings in file_storage.c. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as758) fixes the "warn-unused-result" messages in dummy-hcd. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as787) creates a new workqueue thread to handle delayed USB autosuspend requests. Previously the code used keventd. However it turns out that the hub driver's suspend routine calls flush_scheduled_work(), making it a poor candidate for running in keventd (the call immediately deadlocks). The solution is to use a new thread instead of keventd. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jan Mate 提交于
USB Storage: this patch adds support for Sony Ericsson P990i Signed-off-by: NJan Mate <mate@fiit.stuba.sk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Henrik Kretzschmar 提交于
Converts obsolete typedef'd Scsi_Cmnd into struct scsi_cmnd. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Henrik Kretzschmar 提交于
Fixes kerneldoc errors on usb/core/driver.c, which occured in 2.6.18-rc6-mm2 gregkh-usb-usbcore-add-autosuspend-autoresume-infrastructure.patch Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Raghavendra Biligiri 提交于
During Installation the host tries to enumerate the keyboard/mouse dongle for the Raritan KVM.At this time timeouts have been observed Adding the Raritan KVM USB dongle to the blacklist fixes this issue. Signed-off-by: NRaghavendra Biligiri <Raghavendra_Biligiri@Dell.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Hollis 提交于
Add alternate device IDs for Dlink DUB-E100 Rev B1 Signed-off-by: NDavid Hollis <dhollis@davehollis.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Peter Zijlstra 提交于
========================================================= [ INFO: possible irq lock inversion dependency detected ]
-
由 Alan Cox 提交于
We want to avoid legacy APIs like pci_find_slot(). Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mikael Pettersson 提交于
Implementations assume the buffer is at least 4 byte aligned. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Justin Carlson 提交于
We have a couple of these USB-Serial converters around; they're slightly different from the 2104 models in that they can handle 500Kb/sec over RS422. The existing ftdi driver seems to work just fine if we add in the appropriate IDs. Patch is against 2.6.17.6, but should apply cleanly to pretty much anything recent. From: Justin Carlson <justinca@qatar.cmu.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sean Young 提交于
New phidget interface kits (type 8/8/8) reset their outputs if they haven't received a set report for 2 seconds. Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthias Urlichs 提交于
Add yet another device ID to the ipaq USB-serial driver. Signed-Off-By: NMatthias Urlichs <matthias@urlichs.de> Cc: Ganesh Varadarajan <ganesh@veritas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ian Abbott 提交于
This patch adds support for three OpenPort ECU data cables from Tactrix Inc. to the ftdi_sio driver's device ID table. One of the PIDs was supplied by Donour Sizemore on the ftdi-usb-sio-devel mailing list. The other two were added by myself after examining the Windows driver software. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Petko Manolov 提交于
Address http://bugzilla.kernel.org/show_bug.cgi?id=7126 Attempting to read the ethernet ID directly from the eeprom somehow confuses ADM8515. Subsequent read requests to either the eeprom or the MII fail as well. Didn't dig much deeper, though. For example ADM8513 does not experience this problem. I used the fact that at power up the device is reading its ID automatically (not true for older Pegasus based devices) and put it in the Ethernet ID registers. So now the driver uses get_registers() instead of read_eprom_word() if the device is Pegasus_II based one. Tested it with all (Pegasus and Pegasus_II) gadgets i have and everything seems ok. Cc: <jogeedaklown@yahoo.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as794) adds an unusual_devs entry for the Nokia E60. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Wesley PA4WDH 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this adds a new id to the kaweth driver. Please apply. Signed-Off-By: NOliver Neukum <oliver@neukum.name> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
hwmon: Remove Yuan Mu's address Yuan Mu no longer works at Winbond. I wish to publicly thank Yuan for his help with Winbond hardware monitoring chips support during the past 10 months. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
hwmon: Fix unchecked return status, SMSC chips Fix up 2 more hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
hwmon: Fix unchecked return status, batch 6 Fix up 5 more hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rudolf Marek 提交于
w83792d: Fix unchecked return status Fix the w83792d driver. Add error checking to device_create_file and also care to destroy the files upon exit. Signed-off-by: NRudolf Marek <r.marek@assembler.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rudolf Marek 提交于
w83l785ts: Fix unchecked return status Fix the w83l785ts driver. Add error checking to device_create_file and also care to destroy the files upon exit. Signed-off-by: NRudolf Marek <r.marek@assembler.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jim Cromie 提交于
w83781d: Fix unchecked return status Add 2 attr-file groups (for base and model-specific attrs respectively), create the base group with single call to sysfs_create_group, check the return code on individual calls to device_create_file for each of the model-specific attr-files. Signed-off-by: NJim Cromie <jim.cromie@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roger Lucas 提交于
vt8231: Fix unchecked return status Check the return status from device_create_file() and also use the newer and cleaner sysfs creation functions. Signed-off-by: NRoger Lucas <roger@planbit.co.uk> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
hwmon: Fix unchecked return status, batch 5 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
hwmon: Fix unchecked return status, batch 4 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Note: f71805f actually checked the status from device_create_file already. However it did not remove the files on device destruction. It was also an opportunity to use sysfs_create/remove_group instead of hand-made loops. This makes the changes much more important but I think the result is worth it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mark M. Hoffman 提交于
hwmon: Fix unchecked return status, batch 3 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mark M. Hoffman 提交于
hwmon: Fix unchecked return status, batch 2 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Hubbard 提交于
w83627ehf: Fix unchecked return status Fix: check return value from device_create_file() Fix: call device_remove_file() on error and module unload Fix: call hwmon_device_register() after device_create_file() to eliminate race Signed-off-by: NDavid Hubbard <david.c.hubbard@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jim Cromie 提交于
pc87360: Check for error on sysfs files creation Use sysfs_create_group() for 2 sensor-types which are chip-model invariant, i.e. all-or-nothing attribute groups. Other 2 groups vary too much due to configuration, etc, so we keep the loops of device_create_file(), but now check their returns. Signed-off-by: NJim Cromie <jim.cromie@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jim Cromie 提交于
pc87360: Delete sysfs files on device deletion Add 4 explicit attribute groups for the 5 sensor types: voltage (in), therm, temp, and fan & pwm (together in one group). Use sysfs_remove_group() to drop them, but keeps the existing startup code, which calls device_create_file in loops. Signed-off-by: NJim Cromie <jim.cromie@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jim Cromie 提交于
pc87360: Move some code around Moves code for get-set-decl tuples for 3 items: cpu0_vid, vrm, alarms_in up, to just after the get-set-decl tuple for voltages. These items are already 'activated' together with the rest of the voltage attributes, so the move tightens the grouping that's made explicit in next patch. Signed-off-by: NJim Cromie <jim.cromie@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-