We can get into inconsistency between inodes and directory entries
after fsyncing a directory. The issue is that while a directory gets
the new dentries persisted in the fsync log and replayed at mount time,
the link count of the inode that directory entries point to doesn't
get updated, staying with an incorrect link count (smaller then the
correct value). This later leads to stale file handle errors when
accessing (including attempt to delete) some of the links if all the
other ones are removed, which also implies impossibility to delete the
parent directories, since the dentries can not be removed.

Another issue is that (unlike ext3/4, xfs, f2fs, reiserfs, nilfs2),
when fsyncing a directory, new files aren't logged (their metadata and
dentries) nor any child directories. So this patch fixes this issue too,
since it has the same resolution as the incorrect inode link count issue
mentioned before.

This is very easy to reproduce, and the following excerpt from my test
case for xfstests shows how:

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create our main test file and directory.
  $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foo | _filter_xfs_io
  mkdir $SCRATCH_MNT/mydir

  # Make sure all metadata and data are durably persisted.
  sync

  # Add a hard link to 'foo' inside our test directory and fsync only the
  # directory. The btrfs fsync implementation had a bug that caused the new
  # directory entry to be visible after the fsync log replay but, the inode
  # of our file remained with a link count of 1.
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_2

  # Add a few more links and new files.
  # This is just to verify nothing breaks or gives incorrect results after the
  # fsync log is replayed.
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_3
  $XFS_IO_PROG -f -c "pwrite -S 0xff 0 64K" $SCRATCH_MNT/hello | _filter_xfs_io
  ln $SCRATCH_MNT/hello $SCRATCH_MNT/mydir/hello_2

  # Add some subdirectories and new files and links to them. This is to verify
  # that after fsyncing our top level directory 'mydir', all the subdirectories
  # and their files/links are registered in the fsync log and exist after the
  # fsync log is replayed.
  mkdir -p $SCRATCH_MNT/mydir/x/y/z
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/foo_y_link
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/z/foo_z_link
  touch $SCRATCH_MNT/mydir/x/y/z/qwerty

  # Now fsync only our top directory.
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/mydir

  # And fsync now our new file named 'hello', just to verify later that it has
  # the expected content and that the previous fsync on the directory 'mydir' had
  # no bad influence on this fsync.
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/hello

  # Simulate a crash/power loss.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  # Verify the content of our file 'foo' remains the same as before, 8192 bytes,
  # all with the value 0xaa.
  echo "File 'foo' content after log replay:"
  od -t x1 $SCRATCH_MNT/foo

  # Remove the first name of our inode. Because of the directory fsync bug, the
  # inode's link count was 1 instead of 5, so removing the 'foo' name ended up
  # deleting the inode and the other names became stale directory entries (still
  # visible to applications). Attempting to remove or access the remaining
  # dentries pointing to that inode resulted in stale file handle errors and
  # made it impossible to remove the parent directories since it was impossible
  # for them to become empty.
  echo "file 'foo' link count after log replay: $(stat -c %h $SCRATCH_MNT/foo)"
  rm -f $SCRATCH_MNT/foo

  # Now verify that all files, links and directories created before fsyncing our
  # directory exist after the fsync log was replayed.
  [ -f $SCRATCH_MNT/mydir/foo_2 ] || echo "Link mydir/foo_2 is missing"
  [ -f $SCRATCH_MNT/mydir/foo_3 ] || echo "Link mydir/foo_3 is missing"
  [ -f $SCRATCH_MNT/hello ] || echo "File hello is missing"
  [ -f $SCRATCH_MNT/mydir/hello_2 ] || echo "Link mydir/hello_2 is missing"
  [ -f $SCRATCH_MNT/mydir/x/y/foo_y_link ] || \
      echo "Link mydir/x/y/foo_y_link is missing"
  [ -f $SCRATCH_MNT/mydir/x/y/z/foo_z_link ] || \
      echo "Link mydir/x/y/z/foo_z_link is missing"
  [ -f $SCRATCH_MNT/mydir/x/y/z/qwerty ] || \
      echo "File mydir/x/y/z/qwerty is missing"

  # We expect our file here to have a size of 64Kb and all the bytes having the
  # value 0xff.
  echo "file 'hello' content after log replay:"
  od -t x1 $SCRATCH_MNT/hello

  # Now remove all files/links, under our test directory 'mydir', and verify we
  # can remove all the directories.
  rm -f $SCRATCH_MNT/mydir/x/y/z/*
  rmdir $SCRATCH_MNT/mydir/x/y/z
  rm -f $SCRATCH_MNT/mydir/x/y/*
  rmdir $SCRATCH_MNT/mydir/x/y
  rmdir $SCRATCH_MNT/mydir/x
  rm -f $SCRATCH_MNT/mydir/*
  rmdir $SCRATCH_MNT/mydir

  # An fsck, run by the fstests framework everytime a test finishes, also detected
  # the inconsistency and printed the following error message:
  #
  # root 5 inode 257 errors 2001, no inode item, link count wrong
  #    unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref
  #    unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref

  status=0
  exit

The expected golden output for the test is:

  wrote 8192/8192 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  wrote 65536/65536 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  File 'foo' content after log replay:
  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0020000
  file 'foo' link count after log replay: 5
  file 'hello' content after log replay:
  0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  *
  0200000

Which is the output after this patch and when running the test against
ext3/4, xfs, f2fs, reiserfs or nilfs2. Without this patch, the test's
output is:

  wrote 8192/8192 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  wrote 65536/65536 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  File 'foo' content after log replay:
  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0020000
  file 'foo' link count after log replay: 1
  Link mydir/foo_2 is missing
  Link mydir/foo_3 is missing
  Link mydir/x/y/foo_y_link is missing
  Link mydir/x/y/z/foo_z_link is missing
  File mydir/x/y/z/qwerty is missing
  file 'hello' content after log replay:
  0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  *
  0200000
  rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y/z': No such file or directory
  rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y': No such file or directory
  rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x': No such file or directory
  rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_2': Stale file handle
  rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_3': Stale file handle
  rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir': Directory not empty

Fsck, without this fix, also complains about the wrong link count:

  root 5 inode 257 errors 2001, no inode item, link count wrong
      unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref
      unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref

So fix this by logging the inodes that the dentries point to when
fsyncing a directory.

A test case for xfstests follows.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

If we fallocate(), without the keep size flag, into an area already covered
by an extent previously fallocated, we were updating the inode's i_size but
we weren't updating the inode item in the fs/subvol tree. A following umount
+ mount would result in a loss of the inode's size (and an fsync would miss
too the fact that the inode changed).

Reproducer:

  $ mkfs.btrfs -f /dev/sdd
  $ mount /dev/sdd /mnt
  $ fallocate -n -l 1M /mnt/foobar
  $ fallocate -l 512K /mnt/foobar
  $ umount /mnt
  $ mount /dev/sdd /mnt
  $ od -t x1 /mnt/foobar
  0000000

The expected result is:

  $ od -t x1 /mnt/foobar
  0000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  2000000

A test case for fstests follows soon.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

When using the fast file fsync code path we can miss the fact that new
writes happened since the last file fsync and therefore return without
waiting for the IO to finish and write the new extents to the fsync log.

Here's an example scenario where the fsync will miss the fact that new
file data exists that wasn't yet durably persisted:

1. fs_info->last_trans_committed == N - 1 and current transaction is
   transaction N (fs_info->generation == N);

2. do a buffered write;

3. fsync our inode, this clears our inode's full sync flag, starts
   an ordered extent and waits for it to complete - when it completes
   at btrfs_finish_ordered_io(), the inode's last_trans is set to the
   value N (via btrfs_update_inode_fallback -> btrfs_update_inode ->
   btrfs_set_inode_last_trans);

4. transaction N is committed, so fs_info->last_trans_committed is now
   set to the value N and fs_info->generation remains with the value N;

5. do another buffered write, when this happens btrfs_file_write_iter
   sets our inode's last_trans to the value N + 1 (that is
   fs_info->generation + 1 == N + 1);

6. transaction N + 1 is started and fs_info->generation now has the
   value N + 1;

7. transaction N + 1 is committed, so fs_info->last_trans_committed
   is set to the value N + 1;

8. fsync our inode - because it doesn't have the full sync flag set,
   we only start the ordered extent, we don't wait for it to complete
   (only in a later phase) therefore its last_trans field has the
   value N + 1 set previously by btrfs_file_write_iter(), and so we
   have:

       inode->last_trans <= fs_info->last_trans_committed
           (N + 1)              (N + 1)

   Which made us not log the last buffered write and exit the fsync
   handler immediately, returning success (0) to user space and resulting
   in data loss after a crash.

This can actually be triggered deterministically and the following excerpt
from a testcase I made for xfstests triggers the issue. It moves a dummy
file across directories and then fsyncs the old parent directory - this
is just to trigger a transaction commit, so moving files around isn't
directly related to the issue but it was chosen because running 'sync' for
example does more than just committing the current transaction, as it
flushes/waits for all file data to be persisted. The issue can also happen
at random periods, since the transaction kthread periodicaly commits the
current transaction (about every 30 seconds by default).
The body of the test is:

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create our main test file 'foo', the one we check for data loss.
  # By doing an fsync against our file, it makes btrfs clear the 'needs_full_sync'
  # bit from its flags (btrfs inode specific flags).
  $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" \
                  -c "fsync" $SCRATCH_MNT/foo | _filter_xfs_io

  # Now create one other file and 2 directories. We will move this second file
  # from one directory to the other later because it forces btrfs to commit its
  # currently open transaction if we fsync the old parent directory. This is
  # necessary to trigger the data loss bug that affected btrfs.
  mkdir $SCRATCH_MNT/testdir_1
  touch $SCRATCH_MNT/testdir_1/bar
  mkdir $SCRATCH_MNT/testdir_2

  # Make sure everything is durably persisted.
  sync

  # Write more 8Kb of data to our file.
  $XFS_IO_PROG -c "pwrite -S 0xbb 8K 8K" $SCRATCH_MNT/foo | _filter_xfs_io

  # Move our 'bar' file into a new directory.
  mv $SCRATCH_MNT/testdir_1/bar $SCRATCH_MNT/testdir_2/bar

  # Fsync our first directory. Because it had a file moved into some other
  # directory, this made btrfs commit the currently open transaction. This is
  # a condition necessary to trigger the data loss bug.
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir_1

  # Now fsync our main test file. If the fsync succeeds, we expect the 8Kb of
  # data we wrote previously to be persisted and available if a crash happens.
  # This did not happen with btrfs, because of the transaction commit that
  # happened when we fsynced the parent directory.
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo

  # Simulate a crash/power loss.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  # Now check that all data we wrote before are available.
  echo "File content after log replay:"
  od -t x1 $SCRATCH_MNT/foo

  status=0
  exit

The expected golden output for the test, which is what we get with this
fix applied (or when running against ext3/4 and xfs), is:

  wrote 8192/8192 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  wrote 8192/8192 bytes at offset 8192
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  File content after log replay:
  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0020000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
  *
  0040000

Without this fix applied, the output shows the test file does not have
the second 8Kb extent that we successfully fsynced:

  wrote 8192/8192 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  wrote 8192/8192 bytes at offset 8192
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  File content after log replay:
  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0020000

So fix this by skipping the fsync only if we're doing a full sync and
if the inode's last_trans is <= fs_info->last_trans_committed, or if
the inode is already in the log. Also remove setting the inode's
last_trans in btrfs_file_write_iter since it's useless/unreliable.

Also because btrfs_file_write_iter no longer sets inode->last_trans to
fs_info->generation + 1, don't set last_trans to 0 if we bail out and don't
bail out if last_trans is 0, otherwise something as simple as the following
example wouldn't log the second write on the last fsync:

  1. write to file

  2. fsync file

  3. fsync file
       |--> btrfs_inode_in_log() returns true and it set last_trans to 0

  4. write to file
       |--> btrfs_file_write_iter() no longers sets last_trans, so it
            remained with a value of 0
  5. fsync
       |--> inode->last_trans == 0, so it bails out without logging the
            second write

A test case for xfstests will be sent soon.

CC: <stable@vger.kernel.org>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

There are lockstart and lockend defined in the function and not used
after their duplicate definition scope ends, it's safe to reuse them.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

Convert kmalloc(nr * size, ..) to kmalloc_array that does additional
overflow checks, the zeroing variant is kcalloc.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

Clean the opencoded variant, cond_resched_lock also checks the lock for
contention so it might help in some cases that were not covered by
simple need_resched().
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

When punching a file hole if we endup only zeroing parts of a page,
because the start offset isn't a multiple of the sector size or the
start offset and length fall within the same page, we were not updating
the inode item. This prevented an fsync from doing anything, if no other
file changes happened in the current transaction, because the fields
in btrfs_inode used to check if the inode needs to be fsync'ed weren't
updated.

This issue is easy to reproduce and the following excerpt from the
xfstest case I made shows how to trigger it:

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create our test file.
  $XFS_IO_PROG -f -c "pwrite -S 0x22 -b 16K 0 16K" \
      $SCRATCH_MNT/foo | _filter_xfs_io

  # Fsync the file, this makes btrfs update some btrfs inode specific fields
  # that are used to track if the inode needs to be written/updated to the fsync
  # log or not. After this fsync, the new values for those fields indicate that
  # a subsequent fsync does not need to touch the fsync log.
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo

  # Force a commit of the current transaction. After this point, any operation
  # that modifies the data or metadata of our file, should update those fields in
  # the btrfs inode with values that make the next fsync operation write to the
  # fsync log.
  sync

  # Punch a hole in our file. This small range affects only 1 page.
  # This made the btrfs hole punching implementation write only some zeroes in
  # one page, but it did not update the btrfs inode fields used to determine if
  # the next fsync needs to write to the fsync log.
  $XFS_IO_PROG -c "fpunch 8000 4K" $SCRATCH_MNT/foo

  # Another variation of the previously mentioned case.
  $XFS_IO_PROG -c "fpunch 15000 100" $SCRATCH_MNT/foo

  # Now fsync the file. This was a no-operation because the previous hole punch
  # operation didn't update the inode's fields mentioned before, so they remained
  # with the values they had after the first fsync - that is, they indicate that
  # it is not needed to write to fsync log.
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo

  echo "File content before:"
  od -t x1 $SCRATCH_MNT/foo

  # Simulate a crash/power loss.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  # Enable writes and mount the fs. This makes the fsync log replay code run.
  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  # Because the last fsync didn't do anything, here the file content matched what
  # it was after the first fsync, before the holes were punched, and not what it
  # was after the holes were punched.
  echo "File content after:"
  od -t x1 $SCRATCH_MNT/foo

This issue has been around since 2012, when the punch hole implementation
was added, commit 2aaa6655 ("Btrfs: add hole punching").

A test case for xfstests follows soon.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

This patch is part of a larger project to cleanup btrfs's internal usage
of struct btrfs_root. Many functions take btrfs_root only to grab a
pointer to fs_info.

This causes programmers to ponder which root can be passed. Since only
the fs_info is read affected functions can accept any root, except this
is only obvious upon inspection.

This patch reduces the specificty of such functions to accept the
fs_info directly.

This patch does not address the two functions in ctree.c (insert_ptr,
and split_item) which only use root for BUG_ONs in ctree.c

This patch affects the following functions:
  1) fixup_low_keys
  2) btrfs_set_item_key_safe
Signed-off-by: NDaniel Dressler <danieru.dressler@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

Nobody uses it anymore.

[akpm@linux-foundation.org: fix filemap_xip.c]
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that we got rid of the bdi abuse on character devices we can always use
sb->s_bdi to get at the backing_dev_info for a file, except for the block
device special case.  Export inode_to_bdi and replace uses of
mapping->backing_dev_info with it to prepare for the removal of
mapping->backing_dev_info.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

If right after starting the snapshot creation ioctl we perform a write against a
file followed by a truncate, with both operations increasing the file's size, we
can get a snapshot tree that reflects a state of the source subvolume's tree where
the file truncation happened but the write operation didn't. This leaves a gap
between 2 file extent items of the inode, which makes btrfs' fsck complain about it.

For example, if we perform the following file operations:

    $ mkfs.btrfs -f /dev/vdd
    $ mount /dev/vdd /mnt
    $ xfs_io -f \
          -c "pwrite -S 0xaa -b 32K 0 32K" \
          -c "fsync" \
          -c "pwrite -S 0xbb -b 32770 16K 32770" \
          -c "truncate 90123" \
          /mnt/foobar

and the snapshot creation ioctl was just called before the second write, we often
can get the following inode items in the snapshot's btree:

        item 120 key (257 INODE_ITEM 0) itemoff 7987 itemsize 160
                inode generation 146 transid 7 size 90123 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 flags 0x0
        item 121 key (257 INODE_REF 256) itemoff 7967 itemsize 20
                inode ref index 282 namelen 10 name: foobar
        item 122 key (257 EXTENT_DATA 0) itemoff 7914 itemsize 53
                extent data disk byte 1104855040 nr 32768
                extent data offset 0 nr 32768 ram 32768
                extent compression 0
        item 123 key (257 EXTENT_DATA 53248) itemoff 7861 itemsize 53
                extent data disk byte 0 nr 0
                extent data offset 0 nr 40960 ram 40960
                extent compression 0

There's a file range, corresponding to the interval [32K; ALIGN(16K + 32770, 4096)[
for which there's no file extent item covering it. This is because the file write
and file truncate operations happened both right after the snapshot creation ioctl
called btrfs_start_delalloc_inodes(), which means we didn't start and wait for the
ordered extent that matches the write and, in btrfs_setsize(), we were able to call
btrfs_cont_expand() before being able to commit the current transaction in the
snapshot creation ioctl. So this made it possibe to insert the hole file extent
item in the source subvolume (which represents the region added by the truncate)
right before the transaction commit from the snapshot creation ioctl.

Btrfs' fsck tool complains about such cases with a message like the following:

    "root 331 inode 257 errors 100, file extent discount"

>From a user perspective, the expectation when a snapshot is created while those
file operations are being performed is that the snapshot will have a file that
either:

1) is empty
2) only the first write was captured
3) only the 2 writes were captured
4) both writes and the truncation were captured

But never capture a state where only the first write and the truncation were
captured (since the second write was performed before the truncation).

A test case for xfstests follows.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

To avoid duplicating this double filemap_fdatawrite_range() call for
inodes with async extents (compressed writes) so often.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

For compressed writes, after doing the first filemap_fdatawrite_range() we
don't get the pages tagged for writeback immediately. Instead we create
a workqueue task, which is run by other kthread, and keep the pages locked.
That other kthread compresses data, creates the respective ordered extent/s,
tags the pages for writeback and unlocks them. Therefore we need a second
call to filemap_fdatawrite_range() if we have compressed writes, as this
second call will wait for the pages to become unlocked, then see they became
tagged for writeback and finally wait for the writeback to finish.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

There are the branch hints that obviously depend on the data being
processed, the CPU predictor will do better job according to the actual
load. It also does not make sense to use the hints in slow paths that do
a lot of other operations like locking, waiting or IO.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

When we do a fast fsync, we start all ordered operations and then while
they're running in parallel we visit the list of modified extent maps
and construct their matching file extent items and write them to the
log btree. After that, in btrfs_sync_log() we wait for all the ordered
operations to finish (via btrfs_wait_logged_extents).

The problem with this is that we were completely ignoring errors that
can happen in the extent write path, such as -ENOSPC, a temporary -ENOMEM
or -EIO errors for example. When such error happens, it means we have parts
of the on disk extent that weren't written to, and so we end up logging
file extent items that point to these extents that contain garbage/random
data - so after a crash/reboot plus log replay, we get our inode's metadata
pointing to those extents.

This worked in contrast with the full (non-fast) fsync path, where we
start all ordered operations, wait for them to finish and then write
to the log btree. In this path, after each ordered operation completes
we check if it's flagged with an error (BTRFS_ORDERED_IOERR) and return
-EIO if so (via btrfs_wait_ordered_range).

So if an error happens with any ordered operation, just return a -EIO
error to userspace, so that it knows that not all of its previous writes
were durably persisted and the application can take proper action (like
redo the writes for e.g.) - and definitely not leave any file extent items
in the log refer to non fully written extents.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

When the fsync callback (btrfs_sync_file) starts, it first waits for
the writeback of any dirty pages to start and finish without holding
the inode's mutex (to reduce contention). After this it acquires the
inode's mutex and repeats that process via btrfs_wait_ordered_range
only if we're doing a full sync (BTRFS_INODE_NEEDS_FULL_SYNC flag
is set on the inode).

This is not safe for a non full sync - we need to start and wait for
writeback to finish for any pages that might have been made dirty
before acquiring the inode's mutex and after that first step mentioned
before. Why this is needed is explained by the following comment added
to btrfs_sync_file:

  "Right before acquiring the inode's mutex, we might have new
   writes dirtying pages, which won't immediately start the
   respective ordered operations - that is done through the
   fill_delalloc callbacks invoked from the writepage and
   writepages address space operations. So make sure we start
   all ordered operations before starting to log our inode. Not
   doing this means that while logging the inode, writeback
   could start and invoke writepage/writepages, which would call
   the fill_delalloc callbacks (cow_file_range,
   submit_compressed_extents). These callbacks add first an
   extent map to the modified list of extents and then create
   the respective ordered operation, which means in
   tree-log.c:btrfs_log_inode() we might capture all existing
   ordered operations (with btrfs_get_logged_extents()) before
   the fill_delalloc callback adds its ordered operation, and by
   the time we visit the modified list of extent maps (with
   btrfs_log_changed_extents()), we see and process the extent
   map they created. We then use the extent map to construct a
   file extent item for logging without waiting for the
   respective ordered operation to finish - this file extent
   item points to a disk location that might not have yet been
   written to, containing random data - so after a crash a log
   replay will make our inode have file extent items that point
   to disk locations containing invalid data, as we returned
   success to userspace without waiting for the respective
   ordered operation to finish, because it wasn't captured by
   btrfs_get_logged_extents()."
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

An user reported this, it is because that lseek's SEEK_SET/SEEK_CUR/SEEK_END
allow a negative value for @offset, but btrfs's SEEK_DATA/SEEK_HOLE don't
prepare for that and convert the negative @offset into unsigned type,
so we get (end < start) warning.

[ 1269.835374] ------------[ cut here ]------------
[ 1269.836809] WARNING: CPU: 0 PID: 1241 at fs/btrfs/extent_io.c:430 insert_state+0x11d/0x140()
[ 1269.838816] BTRFS: end < start 4094 18446744073709551615
[ 1269.840334] CPU: 0 PID: 1241 Comm: a.out Tainted: G        W      3.16.0+ #306
[ 1269.858229] Call Trace:
[ 1269.858612]  [<ffffffff81801a69>] dump_stack+0x4e/0x68
[ 1269.858952]  [<ffffffff8107894c>] warn_slowpath_common+0x8c/0xc0
[ 1269.859416]  [<ffffffff81078a36>] warn_slowpath_fmt+0x46/0x50
[ 1269.859929]  [<ffffffff813b0fbd>] insert_state+0x11d/0x140
[ 1269.860409]  [<ffffffff813b1396>] __set_extent_bit+0x3b6/0x4e0
[ 1269.860805]  [<ffffffff813b21c7>] lock_extent_bits+0x87/0x200
[ 1269.861697]  [<ffffffff813a5b28>] btrfs_file_llseek+0x148/0x2a0
[ 1269.862168]  [<ffffffff811f201e>] SyS_lseek+0xae/0xc0
[ 1269.862620]  [<ffffffff8180b212>] system_call_fastpath+0x16/0x1b
[ 1269.862970] ---[ end trace 4d33ea885832054b ]---

This assumes that btrfs starts finding DATA/HOLE from the beginning of file
if the assigned @offset is negative.

Also we add alignment for lock_extent_bits 's range.
Reported-by: NToralf Förster <toralf.foerster@gmx.de>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

The form

  (value + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT

is equivalent to

  (value + PAGE_CACHE_SIZE - 1) / PAGE_CACHE_SIZE

The rest is a simple subsitution, no difference in the generated
assembly code.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

The nodesize and leafsize were never of different values. Unify the
usage and make nodesize the one. Cleanup the redundant checks and
helpers.

Shaves a few bytes from .text:

  text    data     bss     dec     hex filename
852418   24560   23112  900090   dbbfa btrfs.ko.before
851074   24584   23112  898770   db6d2 btrfs.ko.after
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

btrfs_set_key_type and btrfs_key_type are used inconsistently along with
open coded variants. Other members of btrfs_key are accessed directly
without any helpers anyway.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <clm@fb.com>

While we're doing a full fsync (when the inode has the flag
BTRFS_INODE_NEEDS_FULL_SYNC set) that is ranged too (covers only a
portion of the file), we might have ordered operations that are started
before or while we're logging the inode and that fall outside the fsync
range.

Therefore when a full ranged fsync finishes don't remove every extent
map from the list of modified extent maps - as for some of them, that
fall outside our fsync range, their respective ordered operation hasn't
finished yet, meaning the corresponding file extent item wasn't inserted
into the fs/subvol tree yet and therefore we didn't log it, and we must
let the next fast fsync (one that checks only the modified list) see this
extent map and log a matching file extent item to the log btree and wait
for its ordered operation to finish (if it's still ongoing).

A test case for xfstests follows.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

We should only be flushing on close if the file was flagged as needing
it during truncate.  I broke this with my ordered data vs transaction
commit deadlock fix.

Thanks to Miao Xie for catching this.
Signed-off-by: NChris Mason <clm@fb.com>
Reported-by: NMiao Xie <miaox@cn.fujitsu.com>
Reported-by: NFengguang Wu <fengguang.wu@intel.com>

When current btrfs finds that a new extent map is going to be insereted
but failed with -EEXIST, it will try again to insert the extent map
but with the length of sectorsize.
This is OK if we don't enable 'no-holes' feature since all extent space
is continuous, we will not go into the not found->insert routine.

But if we enable 'no-holes' feature, it will make things out of control.
e.g. in 4K sectorsize, we pass the following args to btrfs_get_extent():
btrfs_get_extent() args: start:  27874 len 4100
28672		  27874		28672	27874+4100	32768
                    |-----------------------|
|---------hole--------------------|---------data----------|

1) not found and insert
Since no extent map containing the range, btrfs_get_extent() will go
into the not_found and insert routine, which will try to insert the
extent map (27874, 27847 + 4100).

2) first overlap
But it overlaps with (28672, 32768) extent, so -EEXIST will be returned
by add_extent_mapping().

3) retry but still overlap
After catching the -EEXIST, then btrfs_get_extent() will try insert it
again but with 4K length, which still overlaps, so -EEXIST will be
returned.

This makes the following patch fail to punch hole.
d7781546 btrfs: Avoid trucating page or punching hole in a already existed hole.

This patch will use the right length, which is the (exsisting->start -
em->start) to insert, making the above patch works in 'no-holes' mode.
Also, some small code style problems in above patch is fixed too.
Reported-by: NFilipe David Manana <fdmanana@gmail.com>
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: NFilipe David Manana <fdmanana@suse.com>
Tested-by: NFilipe David Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

For a non-existent key, btrfs_search_slot() sets path->slots[0] to the slot
where the key could have been present, which in this case would be the slot
containing the extent item which would be the next neighbor of the file range
being punched. The current code passes an incremented path->slots[0] and we
skip to the wrong file extent item. This would mean that we would fail to
merge the "yet to be created" hole with the next neighboring hole (if one
exists). Fix this.
Signed-off-by: NChandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Truncates and renames are often used to replace old versions of a file
with new versions.  Applications often expect this to be an atomic
replacement, even if they haven't done anything to make sure the new
version is fully on disk.

Btrfs has strict flushing in place to make sure that renaming over an
old file with a new file will fully flush out the new file before
allowing the transaction commit with the rename to complete.

This ordering means the commit code needs to be able to lock file pages,
and there are a few paths in the filesystem where we will try to end a
transaction with the page lock held.  It's rare, but these things can
deadlock.

This patch removes the ordered flushes and switches to a best effort
filemap_flush like ext4 uses. It's not perfect, but it should fix the
deadlocks.
Signed-off-by: NChris Mason <clm@fb.com>

If btrfs_log_dentry_safe() returns an error, we set ret to 1 and
fall through with the goal of committing the transaction. However,
in the case where the inode doesn't need a full sync, we would call
btrfs_wait_ordered_range() against the target range for our inode,
and if it returned an error, we would return without commiting or
ending the transaction.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NChris Mason <clm@fb.com>

btrfs_punch_hole() will truncate unaligned pages or punch hole on a
already existed hole.
This will cause unneeded zero page or holes splitting the original huge
hole.

This patch will skip already existed holes before any page truncating or
hole punching.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

In these instances, we are trying to determine if a page has been accessed
since we began the operation for the sake of retry.  This is easily
accomplished by doing a gang lookup in the page mapping radix tree, and it
saves us the dependency on the flag (so that we might eventually delete
it).

btrfs_page_exists_in_range borrows heavily from find_get_page, replacing
the radix tree look up with a gang lookup of 1, so that we can find the
next highest page >= index and see if it falls into our lock range.
Signed-off-by: NChris Mason <clm@fb.com>
Signed-off-by: NAlex Gartrell <agartrell@fb.com>

Currently qgroups account for space by intercepting delayed ref updates to fs
trees.  It does this by adding sequence numbers to delayed ref updates so that
it can figure out how the tree looked before the update so we can adjust the
counters properly.  The problem with this is that it does not allow delayed refs
to be merged, so if you say are defragging an extent with 5k snapshots pointing
to it we will thrash the delayed ref lock because we need to go back and
manually merge these things together.  Instead we want to process quota changes
when we know they are going to happen, like when we first allocate an extent, we
free a reference for an extent, we add new references etc.  This patch
accomplishes this by only adding qgroup operations for real ref changes.  We
only modify the sequence number when we need to lookup roots for bytenrs, this
reduces the amount of churn on the sequence number and allows us to merge
delayed refs as we add them most of the time.  This patch encompasses a bunch of
architectural changes

1) qgroup ref operations: instead of tracking qgroup operations through the
delayed refs we simply add new ref operations whenever we notice that we need to
when we've modified the refs themselves.

2) tree mod seq:  we no longer have this separation of major/minor counters.
this makes the sequence number stuff much more sane and we can remove some
locking that was needed to protect the counter.

3) delayed ref seq: we now read the tree mod seq number and use that as our
sequence.  This means each new delayed ref doesn't have it's own unique sequence
number, rather whenever we go to lookup backrefs we inc the sequence number so
we can make sure to keep any new operations from screwing up our world view at
that given point.  This allows us to merge delayed refs during runtime.

With all of these changes the delayed ref stuff is a little saner and the qgroup
accounting stuff no longer goes negative in some cases like it was before.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

While running a stress test with multiple threads writing to the same btrfs
file system, I ended up with a situation where a leaf was corrupted in that
it had 2 file extent item keys that had the same exact key. I was able to
detect this quickly thanks to the following patch which triggers an assertion
as soon as a leaf is marked dirty if there are duplicated keys or out of order
keys:

    Btrfs: check if items are ordered when a leaf is marked dirty
    (https://patchwork.kernel.org/patch/3955431/)

Basically while running the test, I got the following in dmesg:

    [28877.415877] WARNING: CPU: 2 PID: 10706 at fs/btrfs/file.c:553 btrfs_drop_extent_cache+0x435/0x440 [btrfs]()
    (...)
    [28877.415917] Call Trace:
    [28877.415922]  [<ffffffff816f1189>] dump_stack+0x4e/0x68
    [28877.415926]  [<ffffffff8104a32c>] warn_slowpath_common+0x8c/0xc0
    [28877.415929]  [<ffffffff8104a37a>] warn_slowpath_null+0x1a/0x20
    [28877.415944]  [<ffffffffa03775a5>] btrfs_drop_extent_cache+0x435/0x440 [btrfs]
    [28877.415949]  [<ffffffff8118e7be>] ? kmem_cache_alloc+0xfe/0x1c0
    [28877.415962]  [<ffffffffa03777d9>] fill_holes+0x229/0x3e0 [btrfs]
    [28877.415972]  [<ffffffffa0345865>] ? block_rsv_add_bytes+0x55/0x80 [btrfs]
    [28877.415984]  [<ffffffffa03792cb>] btrfs_fallocate+0xb6b/0xc20 [btrfs]
    (...)
    [29854.132560] BTRFS critical (device sdc): corrupt leaf, bad key order: block=955232256,root=1, slot=24
    [29854.132565] BTRFS info (device sdc): leaf 955232256 total ptrs 40 free space 778
    (...)
    [29854.132637] 	item 23 key (3486 108 667648) itemoff 2694 itemsize 53
    [29854.132638] 		extent data disk bytenr 14574411776 nr 286720
    [29854.132639] 		extent data offset 0 nr 286720 ram 286720
    [29854.132640] 	item 24 key (3486 108 954368) itemoff 2641 itemsize 53
    [29854.132641] 		extent data disk bytenr 0 nr 0
    [29854.132643] 		extent data offset 0 nr 0 ram 0
    [29854.132644] 	item 25 key (3486 108 954368) itemoff 2588 itemsize 53
    [29854.132645] 		extent data disk bytenr 8699670528 nr 77824
    [29854.132646] 		extent data offset 0 nr 77824 ram 77824
    [29854.132647] 	item 26 key (3486 108 1146880) itemoff 2535 itemsize 53
    [29854.132648] 		extent data disk bytenr 8699670528 nr 77824
    [29854.132649] 		extent data offset 0 nr 77824 ram 77824
    (...)
    [29854.132707] kernel BUG at fs/btrfs/ctree.h:3901!
    (...)
    [29854.132771] Call Trace:
    [29854.132779]  [<ffffffffa0342b5c>] setup_items_for_insert+0x2dc/0x400 [btrfs]
    [29854.132791]  [<ffffffffa0378537>] __btrfs_drop_extents+0xba7/0xdd0 [btrfs]
    [29854.132794]  [<ffffffff8109c0d6>] ? trace_hardirqs_on_caller+0x16/0x1d0
    [29854.132797]  [<ffffffff8109c29d>] ? trace_hardirqs_on+0xd/0x10
    [29854.132800]  [<ffffffff8118e7be>] ? kmem_cache_alloc+0xfe/0x1c0
    [29854.132810]  [<ffffffffa036783b>] insert_reserved_file_extent.constprop.66+0xab/0x310 [btrfs]
    [29854.132820]  [<ffffffffa036a6c6>] __btrfs_prealloc_file_range+0x116/0x340 [btrfs]
    [29854.132830]  [<ffffffffa0374d53>] btrfs_prealloc_file_range+0x23/0x30 [btrfs]
    (...)

So this is caused by getting an -ENOSPC error while punching a file hole, more
specifically, we get -ENOSPC error from __btrfs_drop_extents in the while loop
of file.c:btrfs_punch_hole() when it's unable to modify the btree to delete one
or more file extent items due to lack of enough free space. When this happens,
in btrfs_punch_hole(), we attempt to reclaim free space by switching our transaction
block reservation object to root->fs_info->trans_block_rsv, end our transaction and
start a new transaction basically - and, we keep increasing our current offset
(cur_offset) as long as it's smaller than the end of the target range (lockend) -
this makes use leave the loop with cur_offset == drop_end which in turn makes us
call fill_holes() for inserting a file extent item that represents a 0 bytes range
hole (and this insertion succeeds, as in the meanwhile more space became available).

This 0 bytes file hole extent item is a problem because any subsequent caller of
__btrfs_drop_extents (regular file writes, or fallocate calls for e.g.), with a
start file offset that is equal to the offset of the hole, will not remove this
extent item due to the following conditional in the while loop of
__btrfs_drop_extents:

    if (extent_end <= search_start) {
            path->slots[0]++;
            goto next_slot;
    }

This later makes the call to setup_items_for_insert() (at the very end of
__btrfs_drop_extents), insert a new file extent item with the same offset as
the 0 bytes file hole extent item that follows it. Needless is to say that this
causes chaos, either when reading the leaf from disk (btree_readpage_end_io_hook),
where we perform leaf sanity checks or in subsequent operations that manipulate
file extent items, as in the fallocate call as shown by the dmesg trace above.

Without my other patch to perform the leaf sanity checks once a leaf is marked
as dirty (if the integrity checker is enabled), it would have been much harder
to debug this issue.

This change might fix a few similar issues reported by users in the mailing
list regarding assertion failures in btrfs_set_item_key_safe calls performed
by __btrfs_drop_extents, such as the following report:

    http://comments.gmane.org/gmane.comp.file-systems.btrfs/32938

Asking fill_holes() to create a 0 bytes wide file hole item also produced the
first warning in the trace above, as we passed a range to btrfs_drop_extent_cache
that has an end smaller (by -1) than its start.

On 3.14 kernels this issue manifests itself through leaf corruption, as we get
duplicated file extent item keys in a leaf when calling setup_items_for_insert(),
but on older kernels, setup_items_for_insert() isn't called by __btrfs_drop_extents(),
instead we have callers of __btrfs_drop_extents(), namely the functions
inode.c:insert_inline_extent() and inode.c:insert_reserved_file_extent(), calling
btrfs_insert_empty_item() to insert the new file extent item, which would fail with
error -EEXIST, instead of inserting a duplicated key - which is still a serious
issue as it would make all similar file extent item replace operations keep
failing if they target the same file range.

Cc: stable@vger.kernel.org
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NChris Mason <clm@fb.com>

In a previous change, commit 12870f1c,
I accidentally moved the roundup of inode->i_size to outside of the
critical section delimited by the inode mutex, which is not atomic and
not correct since the size can be changed by other task before we acquire
the mutex. Therefore fix it.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NChris Mason <clm@fb.com>

aops->write_begin may allocate a new page and make it visible only to have
mark_page_accessed called almost immediately after.  Once the page is
visible the atomic operations are necessary which is noticable overhead
when writing to an in-memory filesystem like tmpfs but should also be
noticable with fast storage.  The objective of the patch is to initialse
the accessed information with non-atomic operations before the page is
visible.

The bulk of filesystems directly or indirectly use
grab_cache_page_write_begin or find_or_create_page for the initial
allocation of a page cache page.  This patch adds an init_page_accessed()
helper which behaves like the first call to mark_page_accessed() but may
called before the page is visible and can be done non-atomically.

The primary APIs of concern in this care are the following and are used
by most filesystems.

	find_get_page
	find_lock_page
	find_or_create_page
	grab_cache_page_nowait
	grab_cache_page_write_begin

All of them are very similar in detail to the patch creates a core helper
pagecache_get_page() which takes a flags parameter that affects its
behavior such as whether the page should be marked accessed or not.  Then
old API is preserved but is basically a thin wrapper around this core
function.

Each of the filesystems are then updated to avoid calling
mark_page_accessed when it is known that the VM interfaces have already
done the job.  There is a slight snag in that the timing of the
mark_page_accessed() has now changed so in rare cases it's possible a page
gets to the end of the LRU as PageReferenced where as previously it might
have been repromoted.  This is expected to be rare but it's worth the
filesystem people thinking about it in case they see a problem with the
timing change.  It is also the case that some filesystems may be marking
pages accessed that previously did not but it makes sense that filesystems
have consistent behaviour in this regard.

The test case used to evaulate this is a simple dd of a large file done
multiple times with the file deleted on each iterations.  The size of the
file is 1/10th physical memory to avoid dirty page balancing.  In the
async case it will be possible that the workload completes without even
hitting the disk and will have variable results but highlight the impact
of mark_page_accessed for async IO.  The sync results are expected to be
more stable.  The exception is tmpfs where the normal case is for the "IO"
to not hit the disk.

The test machine was single socket and UMA to avoid any scheduling or NUMA
artifacts.  Throughput and wall times are presented for sync IO, only wall
times are shown for async as the granularity reported by dd and the
variability is unsuitable for comparison.  As async results were variable
do to writback timings, I'm only reporting the maximum figures.  The sync
results were stable enough to make the mean and stddev uninteresting.

The performance results are reported based on a run with no profiling.
Profile data is based on a separate run with oprofile running.

async dd
                                    3.15.0-rc3            3.15.0-rc3
                                       vanilla           accessed-v2
ext3    Max      elapsed     13.9900 (  0.00%)     11.5900 ( 17.16%)
tmpfs	Max      elapsed      0.5100 (  0.00%)      0.4900 (  3.92%)
btrfs   Max      elapsed     12.8100 (  0.00%)     12.7800 (  0.23%)
ext4	Max      elapsed     18.6000 (  0.00%)     13.3400 ( 28.28%)
xfs	Max      elapsed     12.5600 (  0.00%)      2.0900 ( 83.36%)

The XFS figure is a bit strange as it managed to avoid a worst case by
sheer luck but the average figures looked reasonable.

        samples percentage
ext3       86107    0.9783  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext3       23833    0.2710  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext3        5036    0.0573  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
ext4       64566    0.8961  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext4        5322    0.0713  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext4        2869    0.0384  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs        62126    1.7675  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
xfs         1904    0.0554  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs          103    0.0030  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
btrfs      10655    0.1338  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
btrfs       2020    0.0273  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
btrfs        587    0.0079  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
tmpfs      59562    3.2628  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
tmpfs       1210    0.0696  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
tmpfs         94    0.0054  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed

[akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: NPrabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Now It Can Be Done(tm) - we don't need to do iov_shorten() in
generic_file_direct_write() anymore, now that all ->direct_IO()
instances are converted to proper iov_iter methods and honour
iter->count and iter->iov_offset properly.

Get rid of count/ocount arguments of generic_file_direct_write(),
while we are at it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

For now, just use the same thing we pass to ->direct_IO() - it's all
iovec-based at the moment.  Pass it explicitly to iov_iter_init() and
account for kvec vs. iovec in there, by the same kludge NFS ->direct_IO()
uses.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

all callers of ->aio_read() and ->aio_write() have iov/nr_segs already
checked - generic_segment_checks() done after that is just an odd way
to spell iov_length().
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>