1. 06 10月, 2006 19 次提交
  2. 05 10月, 2006 21 次提交
    • D
      IRQ: Maintain regs pointer globally rather than passing to IRQ handlers · 7d12e780
      David Howells 提交于
      Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
      of passing regs around manually through all ~1800 interrupt handlers in the
      Linux kernel.
      
      The regs pointer is used in few places, but it potentially costs both stack
      space and code to pass it around.  On the FRV arch, removing the regs parameter
      from all the genirq function results in a 20% speed up of the IRQ exit path
      (ie: from leaving timer_interrupt() to leaving do_IRQ()).
      
      Where appropriate, an arch may override the generic storage facility and do
      something different with the variable.  On FRV, for instance, the address is
      maintained in GR28 at all times inside the kernel as part of general exception
      handling.
      
      Having looked over the code, it appears that the parameter may be handed down
      through up to twenty or so layers of functions.  Consider a USB character
      device attached to a USB hub, attached to a USB controller that posts its
      interrupts through a cascaded auxiliary interrupt controller.  A character
      device driver may want to pass regs to the sysrq handler through the input
      layer which adds another few layers of parameter passing.
      
      I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
      main part of the code on FRV and i386, though I can't test most of the drivers.
      I've also done partial conversion for powerpc and MIPS - these at least compile
      with minimal configurations.
      
      This will affect all archs.  Mostly the changes should be relatively easy.
      Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
      
      	struct pt_regs *old_regs = set_irq_regs(regs);
      
      And put the old one back at the end:
      
      	set_irq_regs(old_regs);
      
      Don't pass regs through to generic_handle_irq() or __do_IRQ().
      
      In timer_interrupt(), this sort of change will be necessary:
      
      	-	update_process_times(user_mode(regs));
      	-	profile_tick(CPU_PROFILING, regs);
      	+	update_process_times(user_mode(get_irq_regs()));
      	+	profile_tick(CPU_PROFILING);
      
      I'd like to move update_process_times()'s use of get_irq_regs() into itself,
      except that i386, alone of the archs, uses something other than user_mode().
      
      Some notes on the interrupt handling in the drivers:
      
       (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
           the input_dev struct.
      
       (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
           something different depending on whether it's been supplied with a regs
           pointer or not.
      
       (*) Various IRQ handler function pointers have been moved to type
           irq_handler_t.
      Signed-Off-By: NDavid Howells <dhowells@redhat.com>
      (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
      7d12e780
    • D
      IRQ: Typedef the IRQ handler function type · da482792
      David Howells 提交于
      Typedef the IRQ handler function type.
      Signed-Off-By: NDavid Howells <dhowells@redhat.com>
      (cherry picked from 1356d1e5fd256997e3d3dce0777ab787d0515c7a commit)
      da482792
    • D
      IRQ: Typedef the IRQ flow handler function type · 57a58a94
      David Howells 提交于
      Typedef the IRQ flow handler function type.
      Signed-Off-By: NDavid Howells <dhowells@redhat.com>
      (cherry picked from 8e973fbdf5716b93a0a8c0365be33a31ca0fa351 commit)
      57a58a94
    • L
      Linux 2.6.19-rc1 · d223a601
      Linus Torvalds 提交于
      Merge window closed..
      d223a601
    • M
      [PATCH] itmtouch: fix inverted flag to indicate touch location correctly, correct white space · 77dc2db6
      Mark Assad 提交于
      There is a bug in the current version of the itmtouch USB touchscreen
      driver.  The if statment that checks if pressure is being applied to the
      touch screen is now missing a ! (not), so events are no longer being
      reported correctly.
      
      The original source code for this line was as follows:
      
      	#define UCP(x) ((unsigned char*)(x))
      	#define UCOM(x,y,z) ((UCP((x)->transfer_buffer)[y]) & (z))
      
      	...
      	if (!UCOM(urb, 7, 0x20)) {
      
      And was cleaned to:
      
      	unsigned char *data = urb->transfer_buffer;
      	....
      	 if (data[7] & 0x20) {
      
      (note the lack of '!')
      
      This has been tested on an LG L1510BF and an LG1510SF touch screen.
      Signed-off-by: NMark Assad <massad@gmail.com>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      77dc2db6
    • L
      Merge master.kernel.org:/pub/scm/linux/kernel/git/willy/parisc-2.6 · 4b844718
      Linus Torvalds 提交于
      * master.kernel.org:/pub/scm/linux/kernel/git/willy/parisc-2.6:
        [PA-RISC] Fix time.c for new do_timer() calling convention
        [PA-RISC] Fix must_check warnings in drivers.c
        [PA-RISC] Fix parisc_newuname()
        [PA-RISC] Remove warning from pci.c
        [PA-RISC] Fix filldir warnings
        [PA-RISC] Fix sys32_sysctl
        [PA-RISC] Fix sba_iommu compilation
      4b844718
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc · a43cdf08
      Linus Torvalds 提交于
      * git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
        [POWERPC] cell: fix bugs found by sparse
        [POWERPC] spiderpic: enable new style devtree support
        [POWERPC] Update cell_defconfig
        [POWERPC] spufs: add infrastructure for finding elf objects
        [POWERPC] spufs: support new OF device tree format
        [POWERPC] spufs: add support for read/write on cntl
        [POWERPC] spufs: remove support for ancient firmware
        [POWERPC] spufs: make mailbox functions handle multiple elements
        [POWERPC] spufs: use correct pg_prot for mapping SPU local store
        [POWERPC] spufs: Add infrastructure needed for gang scheduling
        [POWERPC] spufs: implement error event delivery to user space
        [POWERPC] spufs: fix context switch during page fault
        [POWERPC] spufs: scheduler support for NUMA.
        [POWERPC] spufs: cell spu problem state mapping updates
      a43cdf08
    • L
      Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 · 97d41e90
      Linus Torvalds 提交于
      * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits)
        [SCSI] Initial Commit of qla4xxx
        [SCSI] raid class: handle component-add errors
        [SCSI] SCSI megaraid_sas: handle thrown errors
        [SCSI] SCSI aic94xx: handle sysfs errors
        [SCSI] SCSI st: fix error handling in module init, sysfs
        [SCSI] SCSI sd: fix module init/exit error handling
        [SCSI] SCSI osst: add error handling to module init, sysfs
        [SCSI] scsi: remove hosts.h
        [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c
        [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog
        [SCSI] megaraid_sas: adds tasklet for cmd completion
        [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error
        [SCSI] megaraid_sas: function pointer for disable interrupt
        [SCSI] megaraid_sas: frame count optimization
        [SCSI] megaraid_sas: FW transition and q size changes
        [SCSI] qla2xxx: Update version number to 8.01.07-k2.
        [SCSI] qla2xxx: Stall mid-layer error handlers while rport is blocked.
        [SCSI] qla2xxx: Add MODULE_FIRMWARE tags.
        [SCSI] qla2xxx: Add support for host port state FC transport attribute.
        [SCSI] qla2xxx: Add support for fabric name FC transport attribute.
        ...
      97d41e90
    • M
      [PA-RISC] Fix time.c for new do_timer() calling convention · 1604f318
      Matthew Wilcox 提交于
      do_timer now wants to know how many ticks have elapsed.  Now that we
      have to calculate that, we can eliminate some of the clever code that
      avoided having to calculate that.  Also add some more documentation.
      I'd like to thank Grant Grundler for helping me with this.
      Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org>
      1604f318
    • M
      [PA-RISC] Fix must_check warnings in drivers.c · 1070c965
      Matthew Wilcox 提交于
      Panic if we can't register the parisc bus or the root parisc device.
      There's no way we can boot without them, so let the user know ASAP.
      
      If we can't register a parisc device, handle the failure gracefully.
      Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org>
      1070c965
    • M
      [PA-RISC] Fix parisc_newuname() · f64ef295
      Matthew Wilcox 提交于
      The utsname virtualisation broke parisc_newuname compilation.
      Rewrite the implementation to call sys_newuname() like sparc64 does.
      Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org>
      f64ef295
    • M
      [PA-RISC] Remove warning from pci.c · ccd6c355
      Matthew Wilcox 提交于
      max() doesn't like comparing an unsigned long and a resource_size_t,
      so make the local variables resource_size_t too.
      Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org>
      ccd6c355
    • M
      [PA-RISC] Fix filldir warnings · 15c130c1
      Matthew Wilcox 提交于
      filldir_t now takes a u64, not an ino_t.
      Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
      15c130c1
    • M
      [PA-RISC] Fix sys32_sysctl · 17cca072
      Matthew Wilcox 提交于
      When CONFIG_SYSCTL_SYSCALL isn't defined, do_sysctl doesn't exist and
      we fail to link.  Fix with an ifdef, the same way sparc64 did.
      Also add some minor changes to be more like sparc64.
      Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
      17cca072
    • M
      [PA-RISC] Fix sba_iommu compilation · ee9f4b5d
      Matthew Wilcox 提交于
      klist_iter_exit() only takes one parameter.
      Also fix warning by adding additional brackets.
      Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
      ee9f4b5d
    • A
      [POWERPC] cell: fix bugs found by sparse · 43b4f406
      Arnd Bergmann 提交于
      - Some long constants should be marked 'ul'.
      - When using desc->handler_data to pass an __iomem
        register area, we need to add casts to and from
        __iomem.
      Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
      Signed-off-by: NPaul Mackerras <paulus@samba.org>
      43b4f406
    • A
      [POWERPC] spiderpic: enable new style devtree support · f7e2ce78
      Arnd Bergmann 提交于
      This enables support for new firmware test releases.
      Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
      Signed-off-by: NPaul Mackerras <paulus@samba.org>
      f7e2ce78
    • A
      [POWERPC] Update cell_defconfig · 68272047
      Arnd Bergmann 提交于
      This adds defaults for new configuration options added since
      2.6.18 and it enables the option for 64kb pages by default.
      Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
      Signed-off-by: NPaul Mackerras <paulus@samba.org>
      68272047
    • A
      [POWERPC] spufs: add infrastructure for finding elf objects · 86767277
      Arnd Bergmann 提交于
      This adds an 'object-id' file that the spe library can
      use to store a pointer to its ELF object. This was
      originally meant for use by oprofile, but is now
      also used by the GNU debugger, if available.
      
      In order for oprofile to find the location in an spu-elf
      binary where an event counter triggered, we need a way
      to identify the binary in the first place.
      
      Unfortunately, that binary itself can be embedded in a
      powerpc ELF binary. Since we can assume it is mapped into
      the effective address space of the running process,
      have that one write the pointer value into a new spufs
      file.
      
      When a context switch occurs, pass the user value to
      the profiler so that can look at the mapped file (with
      some care).
      Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
      Signed-off-by: NPaul Mackerras <paulus@samba.org>
      86767277
    • A
      [POWERPC] spufs: support new OF device tree format · 7650f2f2
      Arnd Bergmann 提交于
      The properties we used traditionally in the device tree are somewhat
      nonstandard.  This adds support for a more conventional format using
      'interrupts' and 'reg' properties.
      
      The interrupts are specified in three cells (class 0, 1 and 2) and
      registered at the interrupt-parent.
      
      The reg property contains either three or four register areas in the
      order 'local-store', 'problem', 'priv2', and 'priv1', so the priv1 one
      can be left out in case of hypervisor driven systems that access these
      through hcalls.
      Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
      Signed-off-by: NPaul Mackerras <paulus@samba.org>
      7650f2f2
    • A
      [POWERPC] spufs: add support for read/write on cntl · e1dbff2b
      Arnd Bergmann 提交于
      Writing to cntl can be used to stop execution on the
      spu and to restart it, reading from cntl gives the
      contents of the current status register.
      
      The access is always in ascii, as for most other files.
      
      This was always meant to be there, but we had a little
      problem with writing to runctl so it was left out so
      far.
      Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
      Signed-off-by: NPaul Mackerras <paulus@samba.org>
      e1dbff2b