1. 21 11月, 2009 20 次提交
    • P
      perf: Fix time locking · 2b8988c9
      Peter Zijlstra 提交于
      Most sites updating ctx->time and event times do so under
      ctx->lock, make sure they all do.
      
      This was made possible by removing the __perf_event_read() call
      from __perf_event_sync_stat(), which already had this lock
      taken.
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <20091120212509.102316434@chello.nl>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2b8988c9
    • P
      perf: Simplify __perf_event_read · 58e5ad1d
      Peter Zijlstra 提交于
      cpuctx is always active, task context is always active for
      current
      
      the previous condition verifies that if its a task context its
      for current, hence we can assume ctx->is_active.
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <20091120212509.000272254@chello.nl>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      58e5ad1d
    • P
      perf: Simplify __perf_event_sync_stat · 3dbebf15
      Peter Zijlstra 提交于
      Removes constraints from __perf_event_read() by leaving it with
      a single callsite; this callsite had ctx->lock held, the other
      one does not.
      
      Removes some superfluous code from __perf_event_sync_stat().
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <20091120212508.918544317@chello.nl>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      3dbebf15
    • P
      perf: Optimize __perf_event_read() · f6f83785
      Peter Zijlstra 提交于
      Both callers actually have IRQs disabled, no need doing so
      again.
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <20091120212508.863685796@chello.nl>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f6f83785
    • P
      perf: Optimize perf_event_task_sched_out · 02ffdbc8
      Peter Zijlstra 提交于
      Remove an update_context_time() call from the
      perf_event_task_sched_out() path and into the branch its needed.
      
      The call was both superfluous, because __perf_event_sched_out()
      already does it, and wrong, because it was done without holding
      ctx->lock.
      
      Place it in perf_event_sync_stat(), which is the only place it
      is needed and which does already hold ctx->lock.
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <20091120212508.779516394@chello.nl>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      02ffdbc8
    • P
      perf: Fix PERF_FORMAT_GROUP scale info · abf4868b
      Peter Zijlstra 提交于
      As Corey reported, the total_enabled and total_running times
      could occasionally be 0, even though there were events counted.
      
      It turns out this is because we record the times before reading
      the counter while the latter updates the times.
      
      This patch corrects that.
      
      While looking at this code I found that there is a lot of
      locking iffyness around, the following patches correct most of
      that.
      Reported-by: NCorey Ashford <cjashfor@linux.vnet.ibm.com>
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <20091120212508.685559857@chello.nl>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      abf4868b
    • P
      perf: Optimize perf_event_mmap_ctx() · f6d9dd23
      Peter Zijlstra 提交于
      Remove a rcu_read_{,un}lock() pair and a few conditionals.
      
      We can remove the rcu_read_lock() by increasing the scope of one
      in the calling function.
      
      We can do away with the system_state check if the machine still
      boots after this patch (seems to be the case).
      
      We can do away with the list_empty() check because the bare
      list_for_each_entry_rcu() reduces to that now that we've removed
      everything else.
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <20091120212508.606459548@chello.nl>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f6d9dd23
    • P
      perf: Optimize perf_event_comm_ctx() · f6595f3a
      Peter Zijlstra 提交于
      Remove a rcu_read_{,un}lock() pair and a few conditionals.
      
      We can remove the rcu_read_lock() by increasing the scope of one
      in the calling function.
      
      We can do away with the system_state check if the machine still
      boots after this patch (seems to be the case).
      
      We can do away with the list_empty() check because the bare
      list_for_each_entry_rcu() reduces to that now that we've removed
      everything else.
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <20091120212508.527608793@chello.nl>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f6595f3a
    • P
      perf: Optimize perf_event_task_ctx() · d6ff86cf
      Peter Zijlstra 提交于
      Remove a rcu_read_{,un}lock() pair and a few conditionals.
      
      We can remove the rcu_read_lock() by increasing the scope of one
      in the calling function.
      
      We can do away with the system_state check if the machine still
      boots after this patch (seems to be the case).
      
      We can do away with the list_empty() check because the bare
      list_for_each_entry_rcu() reduces to that now that we've removed
      everything else.
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <20091120212508.452227115@chello.nl>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      d6ff86cf
    • P
      perf: Optimize perf_swevent_ctx_event() · 81520183
      Peter Zijlstra 提交于
      Remove a rcu_read_{,un}lock() pair and a few conditionals.
      
      We can remove the rcu_read_lock() by increasing the scope of one
      in the calling function.
      
      We can do away with the system_state check if the machine still
      boots after this patch (seems to be the case).
      
      We can do away with the list_empty() check because the bare
      list_for_each_entry_rcu() reduces to that now that we've removed
      everything else.
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <20091120212508.378188589@chello.nl>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      81520183
    • P
      perf: Optimize some swcounter attr.sample_period==1 paths · 0cff784a
      Peter Zijlstra 提交于
      Avoid the rather expensive perf_swevent_set_period() if we know
      we have to sample every single event anyway.
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <20091120212508.299508332@chello.nl>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0cff784a
    • P
      perf: Allow for custom overflow handlers · 453f19ee
      Peter Zijlstra 提交于
      in-kernel perf users might wish to have custom actions on the
      sample interrupt.
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <20091120212508.222339539@chello.nl>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      453f19ee
    • A
      perf symbols: Change the kernel DSO name if it comes from kallsyms · ef6ae724
      Arnaldo Carvalho de Melo 提交于
      So that the user have a clearer indication about the source of
      the symbols, as we only state buildid mismatches in verbose
      mode, because 'perf top' would overwrite such warning anyway.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258757489-5978-6-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ef6ae724
    • A
      perf symbols: Check vmlinux buildid · fbd733b8
      Arnaldo Carvalho de Melo 提交于
      E.g.:
      
      [root@doppio linux-2.6-tip]# perf top -v --vmlinux
      ../build/tip/vmlinux > /dev/null build_id in vmlinux is
      e96699725a47413a50c231864a8e7a8ced40a31b while expected is
      18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a, ignoring it
      
      I.e. perf top was told to use a vmlinux file that is not the one
      currently running on the machine, it ignores it and falls back
      to using /proc/kallsyms.
      
      This solves many, at first, mysterious results when people have
      a stale vmlinux file while keeping the default of trying to use
      the vmlinux file in the current directory in things like 'perf
      annotate' where the DWARF info is required and thus we can't use
      just /proc/kallsyms.
      
      Modules buildids are already being checked as of the previous
      changeset in this series, because we are using the default
      dso__load routine, that will look at a series of places looking
      for the best file with a matching buildid, starting in the
      -debuginfo directories.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258757489-5978-5-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      fbd733b8
    • A
      perf symbols: Do lazy symtab loading for the kernel & modules too · c338aee8
      Arnaldo Carvalho de Melo 提交于
      Just like we do with the other DSOs. This also simplifies the
      kernel_maps setup process, now all that the tools need to do is
      to call kernel_maps__init and the maps for the modules and
      kernel will be created, then, later, when
      kernel_maps__find_symbol() is used, it will also call
      maps__find_symbol that already checks if the symtab was loaded,
      loading it if needed.
      
      Now if one does 'perf top --hide_kernel_symbols' we won't pay
      the price of loading the (many) symbols in /proc/kallsyms or
      vmlinux.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258757489-5978-4-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c338aee8
    • A
      perf symbols: Introduce dso__build_id_equal · 78075caa
      Arnaldo Carvalho de Melo 提交于
      Will be used in more places.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258757489-5978-3-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      78075caa
    • A
      perf symbols: Filename__read_build_id should look at .notes section too · fd7a346e
      Arnaldo Carvalho de Melo 提交于
      In the kernel we have more than one notes section, so the linker
      script combines all and puts them into a ".notes" combined
      section. So we need to look at both sections and also traverse
      them looking at multiple GElf_Nhdr entries till we find the one
      we want, with the build_id.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258757489-5978-2-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      fd7a346e
    • A
      perf symbols: Remove unrelated actions from dso__load_kernel_sym · 6671cb16
      Arnaldo Carvalho de Melo 提交于
      It should just load kernel symbols, not load the list of
      modules. There are more stuff to move to other routines, but
      lets do it in several steps.
      
      End goal is to be able to defer symbol table loading till we
      find a hit for that map address range. So that the kernel &
      modules are handled just like all the other DSOs in the system.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258757489-5978-1-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      6671cb16
    • I
      Merge branch 'tracing/hw-breakpoints' into perf/core · 96200591
      Ingo Molnar 提交于
      Conflicts:
      	arch/x86/kernel/kprobes.c
      	kernel/trace/Makefile
      
      Merge reason: hw-breakpoints perf integration is looking
                    good in testing and in reviews, plus conflicts
                    are mounting up - so merge & resolve.
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      96200591
    • I
      Merge branch 'perf/urgent' into perf/core · 7031281e
      Ingo Molnar 提交于
      Conflicts:
      	tools/perf/util/symbol.c
      
      Merge reason: this fix will get merged in .33, not .32, plus
                    resolve the conflict.
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7031281e
  2. 20 11月, 2009 5 次提交
    • L
      perf: Add 'perf kmem' tool · ba77c9e1
      Li Zefan 提交于
      This tool is mostly a perf version of kmemtrace-user.
      
      The following information is provided by this tool:
      
       - the total amount of memory allocated and fragmentation per
         call-site
      
       - the total amount of memory allocated and fragmentation per
         allocation
      
       - total memory allocated and fragmentation in the collected
         dataset - ...
      
      Sample output:
      
       # ./perf kmem record
       ^C
       # ./perf kmem --stat caller --stat alloc -l 10
      
       ------------------------------------------------------------------------------
       Callsite          | Total_alloc/Per |  Total_req/Per  |  Hit   | Fragmentation
       ------------------------------------------------------------------------------
       0xc052f37a        |   790528/4096   |   790528/4096   |    193 |    0.000%
       0xc0541d70        |   524288/4096   |   524288/4096   |    128 |    0.000%
       0xc051cc68        |   481600/200    |   481600/200    |   2408 |    0.000%
       0xc0572623        |   297444/676    |   297440/676    |    440 |    0.001%
       0xc05399f1        |    73476/164    |    73472/164    |    448 |    0.005%
       0xc05243bf        |    51456/256    |    51456/256    |    201 |    0.000%
       0xc0730d0e        |    31844/497    |    31808/497    |     64 |    0.113%
       0xc0734c4e        |    17152/256    |    17152/256    |     67 |    0.000%
       0xc0541a6d        |    16384/128    |    16384/128    |    128 |    0.000%
       0xc059c217        |    13120/40     |    13120/40     |    328 |    0.000%
       0xc0501ee6        |    11264/88     |    11264/88     |    128 |    0.000%
       0xc04daef0        |     7504/682    |     7128/648    |     11 |    5.011%
       0xc04e14a3        |     4216/191    |     4216/191    |     22 |    0.000%
       0xc05041ca        |     3524/44     |     3520/44     |     80 |    0.114%
       0xc0734fa3        |     2104/701    |     1620/540    |      3 |   23.004%
       0xc05ec9f1        |     2024/289    |     2016/288    |      7 |    0.395%
       0xc06a1999        |     1792/256    |     1792/256    |      7 |    0.000%
       0xc0463b9a        |     1584/144    |     1584/144    |     11 |    0.000%
       0xc0541eb0        |     1024/16     |     1024/16     |     64 |    0.000%
       0xc06a19ac        |      896/128    |      896/128    |      7 |    0.000%
       0xc05721c0        |      772/12     |      768/12     |     64 |    0.518%
       0xc054d1e6        |      288/57     |      280/56     |      5 |    2.778%
       0xc04b562e        |      157/31     |      154/30     |      5 |    1.911%
       0xc04b536f        |       80/16     |       80/16     |      5 |    0.000%
       0xc05855a0        |       64/64     |       36/36     |      1 |   43.750%
       ------------------------------------------------------------------------------
      
       ------------------------------------------------------------------------------
       Alloc Ptr         | Total_alloc/Per |  Total_req/Per  |  Hit   | Fragmentation
       ------------------------------------------------------------------------------
       0xda884000        |  1052672/4096   |  1052672/4096   |    257 |    0.000%
       0xda886000        |   262144/4096   |   262144/4096   |     64 |    0.000%
       0xf60c7c00        |    16512/128    |    16512/128    |    129 |    0.000%
       0xf59a4118        |    13120/40     |    13120/40     |    328 |    0.000%
       0xdfd4b2c0        |    11264/88     |    11264/88     |    128 |    0.000%
       0xf5274600        |     7680/256    |     7680/256    |     30 |    0.000%
       0xe8395000        |     5948/594    |     5464/546    |     10 |    8.137%
       0xe59c3c00        |     5748/479    |     5712/476    |     12 |    0.626%
       0xf4cd1a80        |     3524/44     |     3520/44     |     80 |    0.114%
       0xe5bd1600        |     2892/482    |     2856/476    |      6 |    1.245%
       ...               | ...             | ...             | ...    | ...
       ------------------------------------------------------------------------------
      
      SUMMARY
      =======
      Total bytes requested: 2333626
      Total bytes allocated: 2353712
      Total bytes wasted on internal fragmentation: 20086
      Internal fragmentation: 0.853375%
      
      TODO:
      - show sym+offset in 'callsite' column
      - show cross node allocation stats
      - collect more useful stats?
      - ...
      Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
      Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
      Acked-by: NPeter Zijlstra <peterz@infradead.org>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
      Cc: linux-mm@kvack.org <linux-mm@kvack.org>
      LKML-Reference: <4B064AF5.9060208@cn.fujitsu.com>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ba77c9e1
    • M
      x86: Instruction decoder test should generate build warning · ce64c620
      Masami Hiramatsu 提交于
      Since some instructions are not decoded correctly by older
      versions of objdump, it may cause false positive error in insn
      decoder posttest.
      
      This changes build error of insn decoder test to build warning.
      Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
      Cc: systemtap <systemtap@sources.redhat.com>
      Cc: DLE <dle-develop@lists.sourceforge.net>
      Cc: Stephen Rothwell <sfr@canb.auug.org.au>
      Cc: Randy Dunlap <rdunlap@xenotime.net>
      Cc: Jim Keniston <jkenisto@us.ibm.com>
      Cc: Stephen Rothwell <sfr@canb.auug.org.au>
      LKML-Reference: <20091116230631.5250.41579.stgit@harusame>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ce64c620
    • A
      perf tools: Don't die() in mmap_dispatch_perf_file · 6b0cb5f9
      Arnaldo Carvalho de Melo 提交于
      Propagate the error, that, interestingly, are already handled by
      all callers :-)
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258649757-17554-3-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      6b0cb5f9
    • A
      perf tools: Eliminate some more die() uses in library functions · d5eed904
      Arnaldo Carvalho de Melo 提交于
      This time in perf_header__adds_write, propagating the do_write
      error returns.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258649757-17554-2-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      d5eed904
    • A
      perf tools: perf_header__read() shouldn't die() · 4dc0a04b
      Arnaldo Carvalho de Melo 提交于
      And also don't call the constructor in it, this way it adheres
      to the model the other methods follow.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258649757-17554-1-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      4dc0a04b
  3. 19 11月, 2009 11 次提交
    • A
      perf symbols: Capture the running kernel buildid too · 2446042c
      Arnaldo Carvalho de Melo 提交于
      [root@doppio linux-2.6-tip]# perf record -a -f sleep 3s ; perf
      buildid-list | grep vmlinux
      [ perf record: Woken up 1 times to write data ]
      [ perf record: Captured and wrote 0.171 MB perf.data (~7489
      samples) ] 18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a vmlinux
      [root@doppio linux-2.6-tip]#
      
      Several refactorings were needed so that we can have symmetry
      between dsos__load_modules() and dsos__load_kernel(), i.e. those
      functions will respectively create and add to the dsos list the
      loaded modules and kernel, with its buildids, but not load its
      symbols. That is something the subcomands that need will have to
      call dso__load_kernel_sym(), just like we do with modules with
      dsos__load_module_sym()/dso__load_module_sym().
      
      Next csets will actually use this info to stop producing bogus
      results using mismatched vmlinux and .ko files.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Roland McGrath <roland@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258582853-8579-4-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2446042c
    • A
      perf symbols: Record the build_ids of kernel modules too · f1617b40
      Arnaldo Carvalho de Melo 提交于
      [root@doppio linux-2.6-tip]# perf record -a sleep 2s;perf
      buildid-list|tail [ perf record: Woken up 1 times to write data
      ] [ perf record: Captured and wrote 0.162 MB perf.data (~7078
      samples) ] 881588fa57b3c1696bc91e5e804a11304f093535 [cfg80211]
      4d47ce1da9d16bad00c962c072451b7c681e82df [snd_page_alloc]
      5146377e89a7caac617f9782f1a02e46263d3a31 [rfkill]
      2153b937bff0d345fea83b63a2e1d3138569f83d [i915]
      4e6fb1bb97362e3ee4d306988b9ad6912d5fb9ae [drm_kms_helper]
      f56ef2bf853e3a798f0d8d51f797622e5dc4420e [drm]
      b0d157a3b5c4e017329ffc07c64623cd6ad65e95 [i2c_algo_bit]
      8125374b905ef9fa8b65d98e166b008ad952f198 [i2c_core]
      fc875c6e5a90e7b915e9d445d0efc859e1b2678c [video]
      4b43c5006589f977e9762fdfc7ac1a92b72fca52 [output]
      [root@doppio linux-2.6-tip]#
      
      elfutils libdwfl/linux-kernel-modules.c was used as reference,
      as suggested by Roland McGrath.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Roland McGrath <roland@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258582853-8579-3-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f1617b40
    • A
      perf symbols: Kill struct build_id_list and die() another day · e30a3d12
      Arnaldo Carvalho de Melo 提交于
      No need for this struct and its allocations, we can just use the
      ->build_id member we already have in struct dso, then ask for it
      to be read, and later traverse the dsos list, writing the
      buildid table to the perf.data file.
      
      As a bonus, one more die() function got killed.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258582853-8579-2-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e30a3d12
    • A
      perf symbols: Fix comparision of build_ids · d3379ab9
      Arnaldo Carvalho de Melo 提交于
      When we read the build_id from the DSO name to then index into
      /usr/lib/debug/.buildid/DSO_BUILD_ID[0:2]/DSO_BUILD_ID[2:], we
      were jumping directly to the comparision with the buildid we
      already have in dso->build_id (that came from the perf.data
      build_id section, collected at perf record time)
      unconditionally, even if we didn't had recorded it, and
      furthermore, comparing a formatted buildid with a rawbuildid, yikes.
      
      Fix it by deleting the dso__read_build_id() function, that was
      really misdesigned anyway, and do the necessary checks and
      correct comparison of raw buildids.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258582853-8579-1-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      d3379ab9
    • A
      perf top: Don't allocate the source parsing members upfront · b269876c
      Arnaldo Carvalho de Melo 提交于
      Defer to parse_source() time allocating it.
      
      Now we use about this much memory:
      
       1724 root      20   0 42104  10m  940 S  0.0  0.4   0:00.23 perf
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258490282-1821-3-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b269876c
    • A
      perf top: Allocate space only for the number of counters used · 5a8e5a30
      Arnaldo Carvalho de Melo 提交于
      Reducing memory consumption on a typical desktop machine:
      
      From:
      
      32710 root      20   0  172m 142m 1056 S  0.0  4.7   0:00.37
      perf
      
      To:
      
        420 root      20   0 47528  16m 1056 R  0.3  0.5   0:00.24 perf
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258490282-1821-2-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      5a8e5a30
    • A
      perf top: Introduce helper function to access symbol from sym_entry · 51a472de
      Arnaldo Carvalho de Melo 提交于
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258490282-1821-1-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      51a472de
    • A
      perf top: Suppress DSO column if only one is present · 1a105f74
      Arnaldo Carvalho de Melo 提交于
      E.g.
      
      [root@doppio ~]# perf top -U
      ---------------------------------------------------------------------------
         PerfTop:     482 irqs/sec  kernel:100.0% [1000Hz cycles],  (all, 2 CPUs)
      ---------------------------------------------------------------------------
      DSO: vmlinux
                   samples  pcnt function
                   _______ _____ _________________________
      
                    471.00 47.9% read_hpet
                     57.00  5.8% acpi_os_read_port
                     30.00  3.1% hpet_next_event
                     30.00  3.1% find_busiest_group
                     22.00  2.2% schedule
                     18.00  1.8% sched_clock_local
                     14.00  1.4% _spin_lock_irqsave
                     14.00  1.4% native_read_tsc
                     13.00  1.3% trace_hardirqs_off
                      9.00  0.9% fget_light
                      9.00  0.9% ioread8
                      8.00  0.8% do_sys_poll
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258479655-28662-3-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1a105f74
    • A
      perf top: Auto adjust symbol and dso widths · 13cc5079
      Arnaldo Carvalho de Melo 提交于
      We pre-calculate the symbol name length, then after we sort the
      entries to print, calculate the biggest one and use that for the
      symbol name width justification, then use the
      dso->long_name->len to justificate the DSO name, deciding whether
      using the short or long name depending on how much space we have
      on the terminal.
      
      IOW give as much info to the user as the terminal width allows.
      Suggested-by: NIngo Molnar <mingo@elte.hu>
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258479655-28662-2-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      13cc5079
    • A
      perf symbols: Add a long_name_len member to struct dso · cfc10d3b
      Arnaldo Carvalho de Melo 提交于
      Using a two bytes hole we already had and since we also need to
      calculate this strlen for fetching the buildids. We'll use it in
      'perf top' to auto-adjust the output based on the terminal
      width.
      Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <1258479655-28662-1-git-send-email-acme@infradead.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      cfc10d3b
    • L
      perf tools: Add ia64 support for tools/perf/ · 11ada26c
      Luck, Tony 提交于
      Compiler on ia64 rejects the "-m64" option.
      Add arch specific pieces to perf.h
      Signed-off-by: NTony Luck <tony.luck@intel.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      LKML-Reference: <4b02d7f43514327a@agluck-desktop.sc.intel.com>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      11ada26c
  4. 17 11月, 2009 4 次提交