- 12 11月, 2013 40 次提交
-
-
由 Stefan Behrens 提交于
Device stats are only initialized (read from tree items) on mount. Trying to read device stats after adding or replacing new devices will return errors. btrfs_init_new_device() and btrfs_init_dev_replace_tgtdev() are the two functions that allocate and initialize new btrfs_device structures after a filesystem is mounted. They set the device stats to zero by using kzalloc() which is correct for new devices. The only missing thing was to declare these stats as being valid (device->dev_stats_valid = 1) and this patch adds this missing code. This is the reproducer: TEST_DEV1=/dev/sdzzzzz1 TEST_DEV2=/dev/sdzzzzz2 TEST_DEV3=/dev/sdzzzzz3 TEST_MNT=/mnt mkfs.btrfs $TEST_DEV1 mount $TEST_DEV1 $TEST_MNT btrfs device add $TEST_DEV2 $TEST_MNT btrfs device stat $TEST_MNT btrfs replace start -B $TEST_DEV2 $TEST_DEV3 $TEST_MNT btrfs device stat $TEST_MNT umount $TEST_MNT Reported-by: NOndrej Kunc <kunc88@gmail.com> Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
When we fail to add a reference after a non-inline insertion by some reasons, eg. ENOSPC, we'll abort the transaction, but we don't return this error to the caller who has to walk around again to find something wrong, that's unnecessary. Also fixup other error paths to keep it simple. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Ilya Dryomov 提交于
For both balance and replace, cancelling involves changing the on-disk state and committing a transaction, which is not a good thing to do on read-only filesystems. Cc: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Ilya Dryomov 提交于
struct btrfs_ioctl_dev_replace_args memory is leaked if replace is requested on a read-only filesystem. Fix it. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Ilya Dryomov 提交于
On mount failures, __btrfs_close_devices can be called well before dev-replace state is read and ->is_tgtdev_for_dev_replace is set. This leads to a bogus decrement of ->rw_devices and sets off a WARN_ON in __btrfs_close_devices if replace target device happens to be on the lists and we fail early in the mount sequence. Fix this by checking the devid instead of ->is_tgtdev_for_dev_replace before the decrement: for replace targets devid is always equal to BTRFS_DEV_REPLACE_DEVID. Cc: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Geyslan G. Bem 提交于
In add_inode_ref() function: Initializes local pointers. Reduces the logical condition with the __add_inode_ref() return value by using only one 'goto out'. Centralizes the exiting, ensuring the freeing of all used memory. Signed-off-by: NGeyslan G. Bem <geyslan@gmail.com> Reviewed-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
After commit de78b51a (btrfs: remove cache only arguments from defrag path), @blockptr is no more used. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
@is_extent is no more needed since we don't defrag extent root. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
The btrfs_insert_empty_item() function doesn't modify its key argument. Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com> Reviewed-by: NZach Brown <zab@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Chandra Seetharaman 提交于
alloc_extent_buffer() uses radix_tree_lookup() when radix_tree_insert() fails with EEXIST. That part of the code is very similar to the code in find_extent_buffer(). This patch replaces radix_tree_lookup() and surrounding code in alloc_extent_buffer() with find_extent_buffer(). Note that radix_tree_lookup() does not need to be protected by tree->buffer_lock. It is protected by eb->refs. While at it, this patch - changes the other usage of radix_tree_lookup() in alloc_extent_buffer() with find_extent_buffer() to reduce redundancy. - removes the unused argument 'len' to find_extent_buffer(). Signed-Off-by: NChandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: NZach Brown <zab@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
Whoever wrote this was braindead. Also it doesn't work right if you have VACANCY's since we assumed you would only have that at the end of the file, which won't be the case in the near future. I tested this with generic/285 and generic/286 as well as the btrfs tests that use fssum since it uses seek_hole/seek_data to verify things are ok. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
I was hitting weird issues when trying to remove hole extents and it turned out it was because I was sending non-aligned offsets down to btrfs_lookup_csums_range. So add an assert for this in case somebody trips over this in the future. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
I added an assert to make sure we were looking up aligned offsets for csums and I tripped it when running xfstests. This is because log_one_extent was checking if block_start == 0 for a hole instead of EXTENT_MAP_HOLE. This worked out fine in practice it seems, but it adds a lot of extra work that is uneeded. With this fix I'm no longer tripping my assert. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
Btrfs_get_extent was not handling this case properly, add a test to make sure we don't regress. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
While trying to kill our hole extents I noticed I was seeing problems where we seek into a file and then start writing and then try to fiemap that file later. This is because we search for offset 0, don't find anything and so back up one slot, which puts us at the inode ref or something like that, which means we goto not_found and create an extent map for our entire search area. This isn't quite what we want, we want to move forward one slot and see if there is an extent there so we can limit our hole extent. This patch fixes this problem, I will add a testcase for this as well. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
Stefan was hitting a panic in the async worker stuff because we had outstanding read bios while we were stopping the worker threads. You could reproduce this easily if you mount -o nospace_cache and ran generic/273. This is because the caching thread stuff is still going and we were stopping all the worker threads. We need to stop the workers after this work is done, and the free block groups code will wait for all the caching threads to stop first so we don't run into this problem. With this patch we no longer panic. Thanks, Cc: stable@vger.kernel.org Reported-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
I'm going to be removing hole extents in the near future so I wanted to make a sanity test for btrfs_get_extent to make sure I don't break anything in the meantime. This patch just puts btrfs_get_extent through its paces by giving it a completely unreasonable mapping to look at and make sure it is giving us back maps that make sense. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
So both Liu and I made huge messes of find_lock_delalloc_range trying to fix stuff, me first by fixing extent size, then him by fixing something I broke and then me again telling him to fix it a different way. So this is obviously a candidate for some testing. This patch adds a pseudo fs so we can allocate fake inodes for tests that need an inode or pages. Then it addes a bunch of tests to make sure find_lock_delalloc_range is acting the way it is supposed to. With this patch and all of our previous patches to find_lock_delalloc_range I am sure it is working as expected now. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
While trying to track down a reserved space leak I noticed a few places where we won't properly clean up reserved space if we have an error, this patch fixes those up. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
In trying to track down where we were leaking reserved space I noticed our reserve extent tracepoints are a little off. First we were saying that the reserved space had been alloced in btrfs_reserve_extent, which isn't the case, this needs to be triggered when we actually allocate the space when we run the delayed ref. We were also missing a few places where we should have been tracing the btrfs_reserve_extent_free tracepoint. With these in place I was able to put together where we were leaking reserved space. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
If we abort a transaction we will do the tree log cleanup at unmount, but this happens after we free up the block groups. This makes all the leak detection warnings go off because we think we've leaked space but in reality we just haven't cleaned it up yet. So instead do the block group cleanup stuff after free'ing the fs roots so we don't get these warnings. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
On error we will wait and free the tree log at unmount without a transaction. This means that the actual freeing of the blocks doesn't happen which means we complain about space leaks on unmount. So to fix this just skip the transaction specific cleanup part of the tree log free'ing if we don't have a transaction and that way we can free up our reserved space and our counters stay happy. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
The transactions should be cleaning up their reservations on failure, this just causes us to have warnings on unmount because we go negative by free'ing reservations that have already been free'ed. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
Structures of the types tree_mod_elem and qgroup_update are allocated during transaction commit but were not being released if the call to btrfs_run_delayed_items() returned an error. Stack trace reported by kmemleak: unreferenced object 0xffff880679f0b398 (size 128): comm "umount", pid 21508, jiffies 4295967793 (age 36718.112s) hex dump (first 32 bytes): 60 b5 f0 79 06 88 ff ff 00 00 00 00 00 00 00 00 `..y............ 00 00 00 00 00 00 00 00 50 1c 00 00 00 00 00 00 ........P....... backtrace: [<ffffffff81742d26>] kmemleak_alloc+0x26/0x50 [<ffffffff811889c2>] kmem_cache_alloc_trace+0x112/0x200 [<ffffffffa046f2d3>] tree_mod_log_insert_key.constprop.45+0x93/0x150 [btrfs] [<ffffffffa04720f9>] __btrfs_cow_block+0x299/0x4f0 [btrfs] [<ffffffffa0472510>] btrfs_cow_block+0x120/0x1f0 [btrfs] [<ffffffffa0476679>] btrfs_search_slot+0x449/0x930 [btrfs] [<ffffffffa048eecf>] btrfs_lookup_inode+0x2f/0xa0 [btrfs] [<ffffffffa04eb49c>] __btrfs_update_delayed_inode+0x1c/0x1d0 [btrfs] [<ffffffffa04eb9e2>] __btrfs_run_delayed_items+0x162/0x1e0 [btrfs] [<ffffffffa04eba63>] btrfs_delayed_inode_exit+0x3/0x20 [btrfs] [<ffffffffa0499c63>] btrfs_commit_transaction+0x203/0xa50 [btrfs] [<ffffffffa046b519>] btrfs_sync_fs+0x69/0x110 [btrfs] [<ffffffff811cb210>] __sync_filesystem+0x30/0x60 [<ffffffff811cb2bb>] sync_filesystem+0x4b/0x70 [<ffffffff8119ce7b>] generic_shutdown_super+0x3b/0xf0 [<ffffffff8119cfc6>] kill_anon_super+0x16/0x30 unreferenced object 0xffff880677e0dd88 (size 32): comm "umount", pid 21508, jiffies 4295967793 (age 36718.112s) hex dump (first 32 bytes): 78 75 11 a9 06 88 ff ff 00 c0 e0 77 06 88 ff ff xu.........w.... 40 c3 a2 70 06 88 ff ff 00 00 00 00 00 00 00 00 @..p............ backtrace: [<ffffffff81742d26>] kmemleak_alloc+0x26/0x50 [<ffffffff811889c2>] kmem_cache_alloc_trace+0x112/0x200 [<ffffffffa04fa54f>] btrfs_qgroup_record_ref+0xf/0x90 [btrfs] [<ffffffffa04e1914>] btrfs_add_delayed_tree_ref+0xf4/0x170 [btrfs] [<ffffffffa048518a>] btrfs_free_tree_block+0x9a/0x220 [btrfs] [<ffffffffa0472163>] __btrfs_cow_block+0x303/0x4f0 [btrfs] [<ffffffffa0472510>] btrfs_cow_block+0x120/0x1f0 [btrfs] [<ffffffffa0476679>] btrfs_search_slot+0x449/0x930 [btrfs] [<ffffffffa048eecf>] btrfs_lookup_inode+0x2f/0xa0 [btrfs] [<ffffffffa04eb49c>] __btrfs_update_delayed_inode+0x1c/0x1d0 [btrfs] [<ffffffffa04eb9e2>] __btrfs_run_delayed_items+0x162/0x1e0 [btrfs] [<ffffffffa04eba63>] btrfs_delayed_inode_exit+0x3/0x20 [btrfs] [<ffffffffa0499c63>] btrfs_commit_transaction+0x203/0xa50 [btrfs] [<ffffffffa046b519>] btrfs_sync_fs+0x69/0x110 [btrfs] [<ffffffff811cb210>] __sync_filesystem+0x30/0x60 [<ffffffff811cb2bb>] sync_filesystem+0x4b/0x70 Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Ilya Dryomov 提交于
Replace progresses strictly from lower to higher offsets, and the progress is tracked in chunks, by storing the physical offset of the dev_extent which is being copied in the cursor_left field of btrfs_dev_replace_item. When we are done copying the chunk, left_cursor is updated to point one byte past the dev_extent, so that on resume we can skip the dev_extents that have already been copied. There is a major bug (which goes all the way back to the inception of dev-replace in 3.8) in the way left_cursor is bumped: the bump is done unconditionally, without any regard to the scrub_chunk return value. On suspend (and also on any kind of error) scrub_chunk returns early, i.e. without completing the copy. This leads to us skipping the chunk that hasn't been fully copied yet when resuming. Fix this by doing the cursor_left update only if scrub_chunk ret is 0. (On suspend scrub_chunk returns with -ECANCELED, so this fix covers both suspend and error cases.) Cc: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
Currently the hash value used for adding an inode to the VFS's inode hash table consists of the plain inode number, which is a 64 bits integer. This results in hash table buckets (hlist_head lists) with too many elements for at least 2 important scenarios: 1) When we have many subvolumes. Each subvolume has its own btree where its files and directories are added to, and each has its own objectid (inode number) namespace. This means that if we have N subvolumes, and all have inode number X associated to a file or directory, the corresponding inodes all map to the same hash table entry, resulting in a bucket (hlist_head list) with N elements; 2) On 32 bits machines. Th VFS hash values are unsigned longs, which are 32 bits wide on 32 bits machines, and the inode (objectid) numbers are 64 bits unsigned integers. We simply cast the inode numbers to hash values, which means that for all inodes with the same 32 bits lower half, the same hash bucket is used for all of them. For example, all inodes with a number (objectid) between 0x0000_0000_ffff_ffff and 0xffff_ffff_ffff_ffff will end up in the same hash table bucket. This change ensures the inode's hash value depends both on the objectid (inode number) and its subvolume's (btree root) objectid. For 32 bits machines, this change gives better entropy by making the hash value depend on both the upper and lower 32 bits of the 64 bits hash previously computed. Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
In tree-log.c:btrfs_log_inode(), we keep calling btrfs_search_forward() until it returns a key whose objectid is higher than our inode or until the key's type is higher than our maximum allowed type. At the end of the loop, we increment our mininum search key's objectid and type regardless of our desired target objectid and maximum desired type, which causes another loop iteration that will call again btrfs_search_forward() just to figure out we've gone beyond our maximum key and exit the loop. Therefore while incrementing our minimum key, don't do it blindly and exit the loop immiediately if the next search key's objectid or type is beyond what we seek. Also after incrementing the type, set the key's offset to 0, which was missing and could make us loose some of the inode's items. Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
It is not used for anything. Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
As we're hold a ref on looking up the extent map, we need to drop the ref before returning to callers. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
The performance was slowed down sometimes when we ran sysbench to measure the performance of the sequential buffered write by 2 or more threads. It was because the write order of the test threads might be confused by the task scheduler, and the coming write would be beyond the end of the file, in this case, we need insert dummy file extents and create a hole for the area we skip. But in order to avoid the ongoing ordered extents which are in the area, we need wait for them. Unfortunately, the current code doesn't check if there are ordered extents in the area or not, try to find and flush the dirty pages directly, but in fact, there is no dirty page in that area, this step of the current code is unnecessary, and just wastes time. Sometimes, it would increase the contention of some locks, and makes the performance slow down suddenly. So we remove the ordered extent flush function before the check, and flush the dirty pages and wait for the ordered extents only when we find them. According to my test, we got 1-2 times of the performance regression when we ran the test by 10 times before applying this patch. After applying this patch, the regression went away. Test Environment: CPU: 1CPU * 4Cores Memory: 6GB Partition: 20GB Test Command: # sysbench --test=fileio --file-total-size=16G --file-test-mode=seqwr \ > --num-threads=512 --file-block-size=16384 --max-time=60 --max-requests=0 run Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Ross Kirk 提交于
Remove unused parameter, 'eb'. Unused since introduction in 5f39d397 Updated to be rebased against current upstream and correct diff supplied this time! Signed-off-by: NRoss Kirk <ross.kirk@gmail.com> Reviewed-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
I was noticing the slab redzone stuff going off every once and a while during transaction aborts. This was caused by two things 1) We would walk the pending snapshots and set their error to -ECANCELED. We don't need to do this, the snapshot stuff waits for a transaction commit and if there is a problem we just free our pending snapshot object and exit. Doing this was causing us to touch the pending snapshot object after the thing had already been freed. 2) We were freeing the transaction manually with wanton disregard for it's use_count reference counter. To fix this I cleaned up the transaction freeing loop to either wait for the transaction commit to finish if it was in the middle of that (since it will be cleaned and freed up there) or to do the cleanup oursevles. I also moved the global "kill all things dirty everywhere" stuff outside of the transaction cleanup loop since that only needs to be done once. With this patch I'm no longer seeing slab corruption because of use after frees. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
Noticed this when forcing errors to happen during delayed ref running. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
During transaction cleanup after an abort we are just removing roots from the ordered roots list which is incorrect. We have a BUG_ON() to make sure that the root is still part of the ordered roots list when we put our ordered extent which we were tripping in this case. So do like we do everywhere else and just move it to the tail of the ordered roots list and allow the normal cleanup to take care of stuff. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
If we abort not during a transaction commit we won't clean up anything until we unmount. Unfortunately if we abort in the middle of writing out an ordered extent we won't clean it up and if somebody is waiting on that ordered extent they will wait forever. To fix this just make the transaction kthread call the cleanup transaction stuff if it notices theres an error, and make btrfs_end_transaction wake up the transaction kthread if there is an error. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
I've been testing our error paths and I was tripping the BUG_ON() in drop_outstanding_extent because our outstanding_extents is 0 for space cache inodes. This is because we don't reserve metadata space for these inodes since we depend on the global block reserve for our space. To fix this we need to make sure the DO_ACCOUNTING stuff doesn't actually call release_metadata for space cache inodes. With this patch I'm no longer panicing. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
If we abort a transaction in the middle of a commit we weren't undoing the intwrite locking. This patch fixes that problem. Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
A user reported a problem where they were getting csum errors when running a balance and running systemd's journal. This is because systemd is awesome and fallocate()'s its log space and writes into it. Unfortunately we assume that when we read in all the csums for an extent that they are sequential starting at the bytenr we care about. This obviously isn't the case for prealloc extents, where we could have written to the middle of the prealloc extent only, which means the csum would be for the bytenr in the middle of our range and not the front of our range. Fix this by offsetting the new bytenr we are logging to based on the original bytenr the csum was for. With this patch I no longer see the csum errors I was seeing. Thanks, Cc: stable@vger.kernel.org Reported-by: NChris Murphy <lists@colorremedies.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
In extent-tree.c:btrfs_write_dirty_block_groups(), if the call to write_one_cache_group() failed, we would return without putting the block group first. Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-