- 14 6月, 2013 1 次提交
-
-
由 Peter Hutterer 提交于
This is effectively already in force through input_mt_init_slots, and uinput too ignores the actual minimum. Since slots are a kernel-genenerated axis only, non-zero minimums make little sense and are likely to cause errors. Better to treat a non-zero minimum as kernel bug if it ever happens. Signed-off-by: NPeter Hutterer <peter.hutterer@who-t.net> Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
-
- 09 6月, 2013 13 次提交
-
-
由 Linus Torvalds 提交于
-
由 Mikulas Patocka 提交于
This patch fixes warnings due to missing lock on write error path. WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]() Hardware name: empty Pid: 26563, comm: dd Tainted: P O 3.9.4 #12 Call Trace: hpfs_truncate+0x75/0x80 [hpfs] hpfs_write_begin+0x84/0x90 [hpfs] _hpfs_bmap+0x10/0x10 [hpfs] generic_file_buffered_write+0x121/0x2c0 __generic_file_aio_write+0x1c7/0x3f0 generic_file_aio_write+0x7c/0x100 do_sync_write+0x98/0xd0 hpfs_file_write+0xd/0x50 [hpfs] vfs_write+0xa2/0x160 sys_write+0x51/0xa0 page_fault+0x22/0x30 system_call_fastpath+0x1a/0x1f Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@kernel.org # 2.6.39+ Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Thomas Gleixner: - Trivial: unused variable removal - Posix-timers: Add the clock ID to the new proc interface to make it useful. The interface is new and should be functional when we reach the final 3.10 release. - Cure a false positive warning in the tick code introduced by the overhaul in 3.10 - Fix for a persistent clock detection regression introduced in this cycle * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Correct run-time detection of persistent_clock. ntp: Remove unused variable flags in __hardpps posix-timers: Show clock ID in proc file tick: Cure broadcast false positive pending bit warning
-
git://git.secretlab.ca/git/linux由 Linus Torvalds 提交于
Pull irqdomain bug fixes from Grant Likely: "This branch contains a set of straight forward bug fixes to the irqdomain code and to a couple of drivers that make use of it." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux: irqchip: Return -EPERM for reserved IRQs irqdomain: document the simple domain first_irq kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid. irqdomain: export irq_domain_add_simple
-
由 Grant Likely 提交于
The irqdomain core will report a log message for any attempted map call that fails unless the error code is -EPERM. This patch changes the Versatile irq controller drivers to use -EPERM because it is normal for a subset of the IRQ inputs to be marked as reserved on the various Versatile platforms. Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Linus Walleij 提交于
The first_irq needs to be zero to get a linear domain and that comes with special semantics. We want to simplify this going forward but some documentation never hurts. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Chen Gang 提交于
Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq' which related with 'irq_data' has to initialize later, or it will cause issue. Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Arnd Bergmann 提交于
All other irq_domain_add_* functions are exported already, and apparently this one got left out by mistake, which causes build errors for ARM allmodconfig kernels: ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined! ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined! Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes for arm-soc platforms. Nothing controversial here, a handful of fixes for regressions and/or serious problems across several of the platforms. Things are slowing down nicely on fix rates for 3.10" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: add debug_ll_io_init() call in exynos_init_io() ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 sh-pfc: r8a7779: Don't group USB OVC and PENC pins ARM: mxs: icoll: Fix interrupts gpio bank 0 ARM: imx: clk-imx6q: AXI clock select index is incorrect ARM: bcm2835: override the HW UART periphid ARM: mvebu: Fix bug in coherency fabric low level init function ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3 ARM: ux500: Only configure wake-up reasons on ux500 based platforms ARM: dts: imx: fix clocks for cspi ARM i.MX6q: fix for ldb_di_sels
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "MIPS fixes across the field. The only area that's standing out is the exception handling which received it's dose of breakage as part of the microMIPS patchset" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: add missing SZ_1M multiplier MIPS: Compat: Fix cputime_to_timeval() arguments in compat binfmt_elf. MIPS: OCTEON: Improve _machine_halt implementation. MIPS: rtlx: Fix implicit declaration of function set_vi_handler() MIPS: Trap exception handling fixes MIPS: Quit exposing Kconfig symbols in uapi headers. MIPS: Remove duplicate definition of check_for_high_segbits.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
Pull m68knommu fix from Greg Ungerer: "A single fix for compilation breakage to many of the ColdFire CPU targets" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: only use local gpio_request_one if not using GPIOLIB
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Regression fixers for the big 3: - nouveau: hdmi audio, dac load detect, s/r regressions fixed - radeon: long standing system hang fixed, hdmi audio and rs780 fast fb fixes - intel: one old regression, a WARN removal, and a stop X dying fix Otherwise one mgag200 fix, a couple of arm build fixes, and a core use after free fix." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nv50/kms: use dac loadval from vbios, where it's available drm/nv50/disp: force dac power state during load detect drm/nv50-nv84/fifo: fix resume regression introduced by playlist race fix drm/nv84/disp: Fix HDMI audio regression drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC. drm/radeon: don't allow audio on DCE6 drm/radeon: Use direct mapping for fast fb access on RS780/RS880 (v2) radeon: Fix system hang issue when using KMS with older cards drm/i915: no lvds quirk for hp t5740 drm/i915: Quirk the pipe A quirk in the modeset state checker drm/i915: Fix spurious -EIO/SIGBUS on wedged gpus drm/mgag200: Add missing write to index before accessing data register drm/nouveau: use mdelay instead of large udelay constants drm/tilcd: select BACKLIGHT_LCD_SUPPORT drm: fix a use-after-free when GPU acceleration disabled
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes from Vinod Koul: "Fix from Andy is for dmatest regression reported by Will and Rabin has fixed runtime ref counting for st_dma40" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmatest: do not allow to interrupt ongoing tests dmaengine: ste_dma40: fix pm runtime ref counting
-
- 08 6月, 2013 14 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v3.10-rc3-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "This contains 4 fixes. The first two fix the case where full RCU debugging is enabled, enabling function tracing causes a live lock of the system. This is due to the added debug checks in rcu_dereference_raw() that is used by the function tracer. These checks are also traced by the function tracer as well as cause enough overhead to the function tracer to slow down the system enough that the time to finish an interrupt can take longer than when the next interrupt is triggered, causing a live lock from the timer interrupt. Talking this over with Paul McKenney, we came up with a fix that adds a new rcu_dereference_raw_notrace() that does not perform these added checks, and let the function tracer use that. The third commit fixes a failed compile when branch tracing is enabled, due to the conversion of the trace_test_buffer() selftest that the branch trace wasn't converted for. The forth patch fixes a bug caught by the RCU lockdep code where a rcu_read_lock() is performed when rcu is disabled (either going to or from idle, or user space). This happened on the irqsoff tracer as it calls task_uid(). The fix here was to use current_uid() when possible that doesn't use rcu locking. Which luckily, is always used when irqsoff calls this code." * tag 'trace-fixes-v3.10-rc3-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Use current_uid() for critical time tracing tracing: Fix bad parameter passed in branch selftest ftrace: Use the rcu _notrace variants for rcu_dereference_raw() and friends rcu: Add _notrace variation of rcu_dereference_raw() and hlist_for_each_entry_rcu()
-
由 Rafael J. Wysocki 提交于
Commit 9f29ab11 ("ACPI / scan: do not match drivers against objects having scan handlers") introduced a boot regression on Tony's ia64 HP rx2600. Tony says: "It panics with the message: Kernel panic - not syncing: Unable to find SBA IOMMU: Try a generic or DIG kernel [...] my problem comes from arch/ia64/hp/common/sba_iommu.c where the code in sba_init() says: acpi_bus_register_driver(&acpi_sba_ioc_driver); if (!ioc_list) { but because of this change we never managed to call ioc_init() so ioc_list doesn't get set up, and we die." Revert it to avoid this breakage and we'll fix the problem it attempted to address later. Reported-by: NTony Luck <tony.luck@gmail.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.linaro.org/people/shawnguo/linux-2.6由 Olof Johansson 提交于
From Shawn Guo, mxs fixes for 3.10: - Since the time we move to MULTI_IRQ_HANDLER, the 0x7f polling for no interrupt in icoll_handle_irq() becomes insane, because 0x7f is an valid interrupt number, the irq of gpio bank 0. That unnecessary polling results in the driver not detecting when irq 0x7f is active which makes the machine effectively dead lock. The fix removes the interrupt poll loop and allows usage of gpio0 interrupt without an infinite loop. * tag 'mxs-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: icoll: Fix interrupts gpio bank 0 Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.linaro.org/people/shawnguo/linux-2.6由 Olof Johansson 提交于
From Shawn Guo, imx fixes for 3.10, take 2: - One device tree fix for all spi node to have per clock added. The clock is needed by spi driver to calculate bit rate divisor. The spi node in the current device trees either does not have the clock or is defined as dummy clock, in which case the driver probe will fail or spi will run at a wrong bit rate. - Two imx6q clock fixes, which correct axi_sels and ldb_di_sels. * tag 'imx-fixes-3.10-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx: clk-imx6q: AXI clock select index is incorrect ARM: dts: imx: fix clocks for cspi ARM i.MX6q: fix for ldb_di_sels Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Doug Anderson 提交于
If the early MMU mapping of the UART happens to get booted out of the TLB between the start of paging_init() and when we finally re-add the UART at the very end of s3c_init_cpu(), we'll get a hang at bootup if we've got early_printk enabled. Avoid this hang by calling debug_ll_io_init() early. Without this patch, you can reliably reproduce a hang when early printk is enabled by adding flush_tlb_all() at the start of exynos_init_io(). After this patch the hang goes away. Signed-off-by: NDoug Anderson <dianders@chromium.org> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'renesas-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman, Renesas ARM based SoC fixes for v3.10: - Correction to USB OVC and PENC pin groupings on r8a7779 SoC. This avoids conflicts when the USB_OVCn pins are used by another function. This has been observed to be a problem in v3.10-rc1. - Update CMT clock rating for sh73a0 SoC to resolve boot failure on kzm9g-reference. This resolves a regression between v3.9 and v3.10-rc1. * tag 'renesas-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 sh-pfc: r8a7779: Don't group USB OVC and PENC pins Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Tushar Behera 提交于
Printing low-level debug messages make an assumption that the specified UART port has been preconfigured by the bootloader. Incorrectly specified UART port results in system getting stalled while printing the message "Uncompressing Linux... done, booting the kernel" This UART port number is specified through S3C_LOWLEVEL_UART_PORT. Since the UART port might different for different board, it is not possible to specify it correctly for every board that use a common defconfig file. Calling this print subroutine only when DEBUG_LL fixes the problem. By disabling DEBUG_LL in default config file, we would be able to boot multiple boards with different default UART ports. With this current approach, we miss the print "Uncompressing Linux... done, booting the kernel." when DEBUG_LL is not defined. Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull infiniband fixes from Roland Dreier: - qib RCU/lockdep fix - iser device removal fix, plus doc fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Fix lockdep splat in qib_alloc_lkey() MAINTAINERS: Add entry for iSCSI Extensions for RDMA (iSER) initiator IB/iser: Add Mellanox copyright IB/iser: Fix device removal flow
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull vfio fix from Alex Williamson: "fix rmmod crash" * tag 'vfio-v3.10-rc5' of git://github.com/awilliam/linux-vfio: vfio: fix crash on rmmod
-
由 Linus Torvalds 提交于
Merge tag 'ecryptfs-3.10-rc5-msync' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fixes from Tyler Hicks: - Fixes how eCryptfs handles msync to sync both the upper and lower file - A couple of MAINTAINERS updates * tag 'ecryptfs-3.10-rc5-msync' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: Check return of filemap_write_and_wait during fsync Update eCryptFS maintainers ecryptfs: fixed msync to flush data
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fix from Steve French: "Fix one byte buffer overrun with prefixpaths on cifs mounts which can cause a problem with mount depending on the string length" * 'for-3.10' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix off-by-one bug in build_unc_path_to_root
-
由 Andy Shevchenko 提交于
When user interrupts ongoing transfers the dmatest may end up with console lockup, oops, or data mismatch. This patch prevents user to abort any ongoing test. Documentation is updated accordingly. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: NWill Deacon <will.deacon@arm.com> Tested-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: - A pile of small regression fix patches for HD-audio VIA codecs - Quirks for HD-aduio and USB-audio devices - A trivial SIS7019 error path fix * tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270 ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface ALSA: hda/via - Clean up duplicated codes ALSA: hda/via - Fix wrongly cleared pins after suspend on VT1802 ALSA: hda - Add keep_eapd_on flag to generic parser ALSA: hda - Allow setting automute/automic hooks after parsing ALSA: hda/via - Disable broken dynamic power control ALSA: usb-audio: fix Roland/Cakewalk UM-3G support ALSA: hda - Add headset quirk for two Dell machines ALSA: hda - add dock support for Thinkpad T431s ALSA: sis7019: fix error return code in sis_chip_create()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael J Wysocki: - Fix for an ACPI PM regression causing Toshiba P870-303 to crash during boot from Rafael J Wysocki. - ACPI fix for an issue causing some drivers to attempt to bind to devices they shouldn't touch from Aaron Lu. - Fix for a recent cpufreq regression related to a possible race with CPU offline from Michael Wang. - ACPI cpufreq regression fix for an issue causing turbo frequencies to be underutilized in some cases from Ross Lagerwall. - cpufreq-cpu0 driver fix related to incorrect clock ACPI usage from Guennadi Liakhovetski. - HP WMI driver fix for an issue causing GPS initialization and poweroff failures on HP Elitebook 6930p from Lan Tianyu. - APEI (ACPI Platform Error Interface) fix for an issue in the error code path in ghes_probe() from Wei Yongjun. - New ACPI video driver blacklist entries for HP m4 and HP Pavilion g6 from Alex Hung and Ash Willis. * tag 'pm+acpi-3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization cpufreq: cpufreq-cpu0: use the exact frequency for clk_set_rate() cpufreq: protect 'policy->cpus' from offlining during __gov_queue_work() ACPI / scan: do not match drivers against objects having scan handlers ACPI / APEI: fix error return code in ghes_probe() acpi-cpufreq: set current frequency based on target P-State ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6 ACPI / video: ignore BIOS initial backlight value for HP m4 x86 / platform / hp_wmi: Fix bluetooth_rfkill misuse in hp_wmi_rfkill_setup()
-
- 07 6月, 2013 12 次提交
-
-
由 Rafael J. Wysocki 提交于
* pm-fixes: cpufreq: cpufreq-cpu0: use the exact frequency for clk_set_rate() cpufreq: protect 'policy->cpus' from offlining during __gov_queue_work() acpi-cpufreq: set current frequency based on target P-State
-
由 Rafael J. Wysocki 提交于
* acpi-fixes: ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization ACPI / scan: do not match drivers against objects having scan handlers ACPI / APEI: fix error return code in ghes_probe() ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6 ACPI / video: ignore BIOS initial backlight value for HP m4 x86 / platform / hp_wmi: Fix bluetooth_rfkill misuse in hp_wmi_rfkill_setup()
-
由 Rafael J. Wysocki 提交于
Commit b3785492 (ACPI / PM: Do not power manage devices in unknown initial states) added code to force devices without _PSC, but having _PS0 defined in the ACPI namespace, into ACPI power state D0 by executing _PS0 for them. That turned out to break Toshiba P870-303, however, so revert that code. References: https://bugzilla.kernel.org/show_bug.cgi?id=58201Reported-and-tested-by: NJerome Cantenot <jerome.cantenot@gmail.com> Tracked-down-by: NLan Tianyu <tianyu.lan@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fix from David Miller: "This is a quick one commit pull request to cure the regression introduced by the MSG_CMSG_COMPAT change." (Background: commit 1be374a0 completely broke 32-bit COMPAT handling by not only disallowing MSG_CMSG_COMPAT from user APIs, but clearing it in our own internal use too!) * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Unbreak compat_sys_{send,recv}msg
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg Kroah-Hartman: "Here are some staging and IIO driver fixes for the 3.10-rc5 release. All of them are tiny, and fix a number of reported issues (build and runtime)" Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'staging-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio:inkern: Fix typo/bug in convert raw to processed. iio: frequency: ad4350: Fix bug / typo in mask inkern: iio_device_put after incorrect return/goto staging: alarm-dev: information leak in alarm_compat_ioctl() iio:callback buffer: free the scan_mask staging: alarm-dev: information leak in alarm_ioctl() drivers: staging: zcache: fix compile error staging: dwc2: fix value of dma_mask
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial driver fixes from Greg Kroah-Hartman: "Here are some small bugfixes, and one revert, of serial driver issues that have been reported" * tag 'tty-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: 8250: Make SERIAL_8250_RUNTIME_UARTS work correctly" serial: samsung: enable clock before clearing pending interrupts during init serial/imx: disable hardware flow control at startup
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg Kroah-Hartman: "Here are a number of USB bugfixes and new device ids for the 3.10-rc5 tree. Nothing major here, a number of new device ids (and movement from the option to the zte_ev driver of a number of ids that we had previously gotten wrong, some xhci bugfixes, some usb-serial driver fixes that were recently found, some host controller fixes / reverts, and a variety of smaller other things" * tag 'usb-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (29 commits) USB: option,zte_ev: move most ZTE CDMA devices to zte_ev USB: option: blacklist network interface on Huawei E1820 USB: whiteheat: fix broken port configuration USB: serial: fix TIOCMIWAIT return value USB: mos7720: fix hardware flow control USB: keyspan: remove unused endpoint-array access USB: keyspan: fix bogus array index USB: zte_ev: fix broken open USB: serial: Add Option GTM681W to qcserial device table. USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device USB: EHCI: fix regression related to qh_refresh() usbfs: Increase arbitrary limit for USB 3 isopkt length USB: zte_ev: fix control-message timeouts USB: mos7720: fix message timeouts USB: iuu_phoenix: fix bulk-message timeout USB: ark3116: fix control-message timeout USB: mos7840: fix DMA to stack USB: mos7720: fix DMA to stack USB: visor: fix initialisation of Treo/Kyocera devices USB: serial: fix Treo/Kyocera interrrupt-in urb context ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: "This fixes a crash when booting a 32-bit kernel via the EFI boot stub. PCI ROM from EFI x86/PCI: Map PCI setup data with ioremap() so it can be in highmem" * tag 'pci-v3.10-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: Map PCI setup data with ioremap() so it can be in highmem
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
Pull more xfs updates from Ben Myers: "Here are several fixes for filesystems with CRC support turned on: fixes for quota, remote attributes, and recovery. There is also some feature work related to CRCs: the implementation of CRCs for the inode unlinked lists, disabling noattr2/attr2 options when appropriate, and bumping the maximum number of ACLs. I would have preferred to defer this last category of items to 3.11. This would require setting a feature bit for the on-disk changes, so there is some pressure to get these in 3.10. I believe this represents the end of the CRC related queue. - Rework of dquot CRCs - Fix for remote attribute invalidation of a leaf - Fix ordering of transaction replay in recovery - Implement CRCs for inode unlinked list - Disable noattr2/attr2 mount options when CRCs are enabled - Bump the limitation of ACL entries for v5 superblocks" * tag 'for-linus-v3.10-rc5' of git://oss.sgi.com/xfs/xfs: xfs: increase number of ACL entries for V5 superblocks xfs: disable noattr2/attr2 mount options for CRC enabled filesystems xfs: inode unlinked list needs to recalculate the inode CRC xfs: fix log recovery transaction item reordering xfs: fix remote attribute invalidation for a leaf xfs: rework dquot CRCs
-
由 Andy Lutomirski 提交于
I broke them in this commit: commit 1be374a0 Author: Andy Lutomirski <luto@amacapital.net> Date: Wed May 22 14:07:44 2013 -0700 net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg This patch adds __sys_sendmsg and __sys_sendmsg as common helpers that accept MSG_CMSG_COMPAT and blocks MSG_CMSG_COMPAT at the syscall entrypoints. It also reverts some unnecessary checks in sys_socketcall. Apparently I was suffering from underscore blindness the first time around. Signed-off-by: NAndy Lutomirski <luto@amacapital.net> Tested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steven Rostedt (Red Hat) 提交于
The irqsoff tracer records the max time that interrupts are disabled. There are hooks in the assembly code that calls back into the tracer when interrupts are disabled or enabled. When they are enabled, the tracer checks if the amount of time they were disabled is larger than the previous recorded max interrupts off time. If it is, it creates a snapshot of the currently running trace to store where the last largest interrupts off time was held and how it happened. During testing, this RCU lockdep dump appeared: [ 1257.829021] =============================== [ 1257.829021] [ INFO: suspicious RCU usage. ] [ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G W [ 1257.829021] ------------------------------- [ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle! [ 1257.829021] [ 1257.829021] other info that might help us debug this: [ 1257.829021] [ 1257.829021] [ 1257.829021] RCU used illegally from idle CPU! [ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0 [ 1257.829021] RCU used illegally from extended quiescent state! [ 1257.829021] 2 locks held by trace-cmd/4831: [ 1257.829021] #0: (max_trace_lock){......}, at: [<ffffffff810e2b77>] stop_critical_timing+0x1a3/0x209 [ 1257.829021] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff810dae5a>] __update_max_tr+0x88/0x1ee [ 1257.829021] [ 1257.829021] stack backtrace: [ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G W 3.10.0-rc1-test+ #171 [ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 [ 1257.829021] 0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8 [ 1257.829021] ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003 [ 1257.829021] ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a [ 1257.829021] Call Trace: [ 1257.829021] [<ffffffff8153dd2b>] dump_stack+0x19/0x1b [ 1257.829021] [<ffffffff81092a00>] lockdep_rcu_suspicious+0x109/0x112 [ 1257.829021] [<ffffffff810daebf>] __update_max_tr+0xed/0x1ee [ 1257.829021] [<ffffffff810dae5a>] ? __update_max_tr+0x88/0x1ee [ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107 [ 1257.829021] [<ffffffff810dbf85>] update_max_tr_single+0x11d/0x12d [ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107 [ 1257.829021] [<ffffffff810e2b15>] stop_critical_timing+0x141/0x209 [ 1257.829021] [<ffffffff8109569a>] ? trace_hardirqs_on+0xd/0xf [ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107 [ 1257.829021] [<ffffffff810e3057>] time_hardirqs_on+0x2a/0x2f [ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107 [ 1257.829021] [<ffffffff8109550c>] trace_hardirqs_on_caller+0x16/0x197 [ 1257.829021] [<ffffffff8109569a>] trace_hardirqs_on+0xd/0xf [ 1257.829021] [<ffffffff811002b9>] user_enter+0xfd/0x107 [ 1257.829021] [<ffffffff810029b4>] do_notify_resume+0x92/0x97 [ 1257.829021] [<ffffffff8154bdca>] int_signal+0x12/0x17 What happened was entering into the user code, the interrupts were enabled and a max interrupts off was recorded. The trace buffer was saved along with various information about the task: comm, pid, uid, priority, etc. The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock() to retrieve the data, and this happened to happen where RCU is blind (user_enter). As only the preempt and irqs off tracers can have this happen, and they both only have the tsk == current, if tsk == current, use current_uid() instead of task_uid(), as current_uid() does not use RCU as only current can change its uid. This fixes the RCU suspicious splat. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Dan Williams 提交于
Per some ZTE Linux drivers I found for the AC2716, the following patch moves most ZTE CDMA devices from option to zte_ev. The blacklist stuff that option does is not required with zte_ev, because it doesn't implement any of the send_setup hooks which the blacklist suppressed. I did not move the 2718 over because I could not find any ZTE Linux drivers for that device, nor even any Windows drivers. Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-