When accel is not working on device with virtual address space radeon
segfault because the ib buffer is NULL and trying to map it inside the
virtual address space trigger segfault. This patch only map the ib
buffer if accel is working.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

Otherwise the limit is raised to high.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Tested-by: NKen Moffat <zarniwhoop@ntlworld.com>

Probably a copy paste typo.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

Some buffers (UVD/VM page tables) must be placed in VRAM,
but the byte restriction for moving buffers didn't took this
into account.

v2: keep closer to the original code
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMarek Olšák <marek.olsak@amd.com>

Take padding into account as well.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75651Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Newer PX systems have non-VGA pci class dGPUs.  Update
the ATRM fetch method to handle those cases.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=75401Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

Mullins is DCE83 just like Kabini.  Set the proper number
of endpoints on mullins.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

v2 (chk): fix image size storage
v3 (chk): fix UV size calculation
Signed-off-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

Placing them exclusively into VRAM might not work all the time.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=78297Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Intel fixes for regressions, black screens and hangs, for 3.15.

* tag 'drm-intel-fixes-2014-05-16' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Increase WM memory latency values on SNB
  drm/i915: restore backlight precision when converting from ACPI
  drm/i915: Use the first mode if there is no preferred mode in the EDID
  drm/i915/dp: force eDP lane count to max available lanes on BDW
  drm/i915/vlv: reset VLV media force wake request register
  drm/i915/SDVO: For sysfs link put directory and target in correct order
  drm/i915: use lane count and link rate from VBT as minimums for eDP
  drm/i915: clean up VBT eDP link param decoding
  drm/i915: consider the source max DP lane count too

On SNB the BIOS provided WM memory latency values seem insufficient to
handle high resolution displays.

In this particular case the display mode was a 2560x1440@60Hz, which
makes the pixel clock 241.5 MHz. It was empirically found that a memory
latency value if 1.2 usec is enough to avoid underruns, whereas the BIOS
provided value of 0.7 usec was clearly too low. Incidentally 1.2 usec
is what the typical BIOS provided values are on IVB systems.

Increase the WM memory latency values to at least 1.2 usec on SNB.
Hopefully this won't have a significant effect on power consumption.

v2: Increase the latency values regardless of the pixel clock

Cc: Robert N <crshman@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70254Tested-by: NRobert Navarro <crshman@gmail.com>
Tested-by: NVitaly Minko <vitaly.minko@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

When we set backlight on behalf of ACPI opregion, we will convert the
backlight value in the 0-255 range defined in opregion to the actual
hardware level. Commit 22505b82 (drm/i915: avoid brightness overflow
when doing scale) is meant to fix the overflow problem when doing the
conversion, but it also caused a problem that the converted hardware
level doesn't quite represent the intended value: say user wants maximum
backlight level(255 in opregion's range), then we will calculate the
actual hardware level to be: level = freq / max * level, where freq is
the hardware's max backlight level(937 on an user's box), and max and
level are all 255. The converted value should be 937 but the above
calculation will yield 765.

To fix this issue, just use 64 bits to do the calculation to keep the
precision and avoid overflow at the same time.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=72491Reported-by: NNico Schottelius <nico-bugzilla.kernel.org@schottelius.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

This matches the algorithm used by earlier kernels when selecting the
mode for the fbcon. And only if there is no modes at all, do we fall
back to using the BIOS configuration. Seamless transition is still
preserved (from the BIOS configuration to ours) so long as the BIOS has
also chosen what we hope is the native configuration.
Reported-by: NKnut Petersen <Knut_Petersen@t-online.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78655Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: NKnut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
[Jani: applied Chris' "Please imagine that I wrote this correctly."]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

There are certain BDW high res eDP machines that regressed due to

commit 38aecea0
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Mar 3 11:18:10 2014 +0100

    drm/i915: reverse dp link param selection, prefer fast over wide again

The commit lead to 2 lanes at 5.4 Gbps being used instead of 4 lanes at
2.7 Gbps on the affected machines. Link training succeeded for both, but
the screen remained blank with the former config. Further investigation
showed that 4 lanes at 5.4 Gbps worked also.

The root cause for the blank screen using 2 lanes remains unknown, but
apparently the driver for a certain other operating system by default
uses the max available lanes. Follow suit on Broadwell eDP, for at least
until we figure out what is going on.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76711Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Tested-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Pull file locking fix from Jeff Layton:
 "Fix for regression in handling of F_GETLK commands"

* tag 'locks-v3.15-4' of git://git.samba.org/jlayton/linux:
  locks: only validate the lock vs. f_mode in F_SETLK codepaths

Pull hwmon fixes from Guenter Roeck:
 "Fix resource leak as well as broken store function in emc1403 driver,
  and add support for additional chip revisions"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (emc1403) Support full range of known chip revision numbers
  hwmon: (emc1403) Fix resource leak on module unload
  hwmon: (emc1403) fix inverted store_hyst()

Pull a percpu fix from Tejun Heo:
 "Fix for a percpu allocator bug where it could try to kfree() a memory
  region allocated using vmalloc().  The bug has been there for years
  now and is unlikely to have ever triggered given the size of struct
  pcpu_chunk.  It's still theoretically possible and the fix is simple
  and safe enough, so the patch is marked with -stable"

* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: make pcpu_alloc_chunk() use pcpu_mem_free() instead of kfree()

Pull workqueue fixes from Tejun Heo:
 "Fixes for two bugs in workqueue.

  One is exiting with internal mutex held in a failure path of
  wq_update_unbound_numa().  The other is a subtle and unlikely
  use-after-possible-last-put in the rescuer logic.  Both have been
  around for quite some time now and are unlikely to have triggered
  noticeably often.  All patches are marked for -stable backport"

* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix a possible race condition between rescuer and pwq-release
  workqueue: make rescuer_thread() empty wq->maydays list before exiting
  workqueue: fix bugs in wq_update_unbound_numa() failure path

Pull cgroup fixes from Tejun Heo:
 "During recent restructuring, device_cgroup unified config input check
  and enforcement logic; unfortunately, it turned out to share too much.
  Aristeu's patches fix the breakage and marked for -stable backport.

  The other two patches are fallouts from kernfs conversion.  The blkcg
  change is temporary and will go away once kernfs internal locking gets
  simplified (patches pending)"

* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  blkcg: use trylock on blkcg_pol_mutex in blkcg_reset_stats()
  device_cgroup: check if exception removal is allowed
  device_cgroup: fix the comment format for recently added functions
  device_cgroup: rework device access check and exception checking
  cgroup: fix the retry path of cgroup_mount()

Pull xen bug fixes from David Vrabel:
 - Fix arm64 crash on boot.
 - Quiet a noisy arm build warning (virt_to_pfn() redefined).

* tag 'stable/for-linus-3.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm64: introduce virt_to_pfn
  xen/events/fifo: correctly align bitops
  arm/xen: Remove definiition of virt_to_pfn in asm/xen/page.h

Pull cifs fix from Steve French:
 "Small cifs fix for metadata caching"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix actimeo=0 corner case when cifs_i->time == jiffies

Pull md bugfixes from Neil Brown:
 "Two bugfixes for md in 3.15

  Both tagged for -stable"

* tag 'md/3.15-fixes' of git://neil.brown.name/md:
  md: avoid possible spinning md thread at shutdown.
  md/raid10: call wait_barrier() for each request submitted.

Pull ARM SoC fixes from Olof Johansson:
 "Seems like we've had more fixes than usual this release cycle, but
  there's nothing in particular that we're doing differently.  Perhaps
  it's just one of those cycles where more people are finding more
  regressions (and/or that the latency of when people actually test
  what's been in the tree for a while is catching up so that we get the
  bug reports now).

  The bigger changes here are are for TI and Marvell platforms:
   * Timing changes for GPMC (generic localbus) on OMAP causing some
     largeish DTS deltas.
   * Fixes to window allocation on PCI for mvebu touching drivers/
     stuff.  Patches have acks from subsystem maintainers where needed.
   * A fix from Thomas for a botched DT conversion in drivers/edma.

  There's a handful of other fixes for the above platforms as well as
  sunxi, at91, i.MX.  I also included a MAINTAINER update for Broadcom,
  and a trivial move of a binding doc.

  I know you said you'd be offline this week, but I might as well post
  it for when you return.  :)"

I'm not quite offline yet.  Doing a few pulls in the last hour before my
internet goes away..

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  MAINTAINERS: update Broadcom ARM tree location and add an SoC family
  ARM: dts: i.MX53: Fix ipu register space size
  ARM: dts: kirkwood: fix mislocated pcie-controller nodes
  ARM: sunxi: Enable GMAC in sunxi_defconfig
  ARM: common: edma: Fix xbar mapping
  ARM: sun7i: Fix i2c4 base address
  ARM: Kirkwood: T5325: Fix double probe of Codec
  ARM: mvebu: enable the SATA interface on Armada 375 DB
  ARM: mvebu: specify I2C bus frequency on Armada 370 DB
  ARM: mvebu: use qsgmii phy-mode for Armada XP GP interfaces
  ARM: mvebu: fix NOR bus-width in Armada XP OpenBlocks AX3 Device Tree
  ARM: mvebu: fix NOR bus-width in Armada XP DB Device Tree
  ARM: mvebu: fix NOR bus-width in Armada XP GP Device Tree
  ARM: dts: AM3517: Disable absent IPs inherited from OMAP3
  ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox
  ARM: dts: OMAP5: Add mailbox dt node to fix boot warning
  ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU
  ARM: dts: am437x-gp-evm: Do not reset gpio5
  ARM: dts: omap3-igep0020: use SMSC9221 timings
  PCI: mvebu: split PCIe BARs into multiple MBus windows when needed
  ...

The datasheet for EMC1413/EMC1414, which is fully compatible to
EMC1403/1404 and uses the same chip identification, references revision
numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers
from 0x01 to 0x04 to make sure none are missed.
Signed-off-by: NJosef Gajdusek <atx@atx.name>
Cc: stable@vger.kernel.org
[Guenter Roeck: Updated headline and description]
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Commit 454aee17 claims to convert driver emc1403 to use
devm_hwmon_device_register_with_groups, however the patch itself makes
use of hwmon_device_register_with_groups instead. As the driver remove
function was still dropped, the hwmon device is no longer unregistered
on driver removal, leading to a resource leak.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Fixes: 454aee17 hwmon: (emc1403) Convert to use devm_hwmon_device_register_with_groups
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org [3.13+]
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Attempts to set the hysteresis value to a temperature below the target
limit fails with "write error: Numerical result out of range" due to
an inverted comparison.
Signed-off-by: NJosef Gajdusek <atx@atx.name>
Reviewed-by: NJean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org
[Guenter Roeck: Updated headline and description]
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

virt_to_pfn has been defined in arch/arm/include/asm/memory.h by commit
e26a9e00 "ARM: Better virt_to_page() handling" and Xen has come to rely
on it.  Introduce virt_to_pfn on arm64 too.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>

Pull nfsd fixes from Bruce Fields.

* 'for-3.15' of git://linux-nfs.org/~bfields/linux:
  NFSD: Call ->set_acl with a NULL ACL structure if no entries
  NFSd: call rpc_destroy_wait_queue() from free_client()
  NFSd: Move default initialisers from create_client() to alloc_client()

Merge misc fixes from Andrew Morton:
 "4 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, thp: close race between mremap() and split_huge_page()
  mm: postpone the disabling of kmemleak early logging
  MAINTAINERS: update maintainership of LTP
  drivers/rtc/rtc-hym8563.c: set uie_unsupported

It's critical for split_huge_page() (and migration) to catch and freeze
all PMDs on rmap walk.  It gets tricky if there's concurrent fork() or
mremap() since usually we copy/move page table entries on dup_mm() or
move_page_tables() without rmap lock taken.  To get it work we rely on
rmap walk order to not miss any entry.  We expect to see destination VMA
after source one to work correctly.

But after switching rmap implementation to interval tree it's not always
possible to preserve expected walk order.

It works fine for dup_mm() since new VMA has the same vma_start_pgoff()
/ vma_last_pgoff() and explicitly insert dst VMA after src one with
vma_interval_tree_insert_after().

But on move_vma() destination VMA can be merged into adjacent one and as
result shifted left in interval tree.  Fortunately, we can detect the
situation and prevent race with rmap walk by moving page table entries
under rmap lock.  See commit 38a76013.

Problem is that we miss the lock when we move transhuge PMD.  Most
likely this bug caused the crash[1].

[1] http://thread.gmane.org/gmane.linux.kernel.mm/96473

Fixes: 108d6642 ("mm anon rmap: remove anon_vma_moveto_tail")
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: NMichel Lespinasse <walken@google.com>
Cc: Dave Jones <davej@redhat.com>
Cc: David Miller <davem@davemloft.net>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>        [3.7+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 8910ae89 ("kmemleak: change some global variables to int"),
in addition to the atomic -> int conversion, moved the disabling of
kmemleak_early_log to the beginning of the kmemleak_init() function,
before the full kmemleak tracing is actually enabled.  In this small
window, kmem_cache_create() is called by kmemleak which triggers
additional memory allocation that are not traced.  This patch restores
the original logic with kmemleak_early_log disabling when kmemleak is
fully functional.

Fixes: 8910ae89 (kmemleak: change some global variables to int)
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Also remove sf.net git repo which is no longer available and update link
to LTP web pages.
Signed-off-by: NCyril Hrubis <chrubis@suse.cz>
Signed-off-by: NCaspar Zhang <caspar@casparzhang.com>
Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: NJan Stancek <jstancek@redhat.com>
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NStanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The alarm of the hym8563 only supports a minute accuracy, while the uie
wants an alarm one second in the future.  Therefore things like the
select() syscall will fail with a timeout, because the next alarm will
happen in a worst case of 60 seconds.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge tag 'davinci-fixes-for-v3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes

Pull "DaVinci fixes for v3.15" from Sekhar Nori:

The patch fixes EDMA crossbar mapping to actually
make it work. The patch has been tagged for stable.

* tag 'davinci-fixes-for-v3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: common: edma: Fix xbar mapping
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge 'Allwinner fixes for 3.15' from Maxime Ripard:

Set of fixes for the Allwinner support for 3.15

Some minor things, the major thing being the enabling of the GMAC driver in
sunxi_defconfig that will un-break Olof's autobooters.

* tag 'sunxi-fixes-for-3.15' of https://github.com/mripard/linux:
  ARM: sunxi: Enable GMAC in sunxi_defconfig
  ARM: sun7i: Fix i2c4 base address
  ARM: sun7i: fix PLL4 clock and add PLL8
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge 'ARM: mvebu: DT fixes for v3.15 (incr #2)' from Jason Cooper:

mvebu DT fixes for v3.15 (incremental #2)

 - kirkwood: fix mis-located pcie controller nodes

* tag 'mvebu-dt-fixes-3.15-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: fix mislocated pcie-controller nodes
Signed-off-by: NOlof Johansson <olof@lixom.net>

The Broadcom ARM tree location has changed names to reflect other SoC
families that are queued here. Also add the 216xx family as maintained.
Signed-off-by: NMatt Porter <mporter@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The IPU register space is 128MB, not 2GB.

Fixes: abed9a6b 'ARM i.MX53: Add IPU support'
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NShawn Guo <shawn.guo@freescale.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Pull x86 fixes from Peter Anvin:
 "A somewhat unpleasantly large collection of small fixes.  The big ones
  are the __visible tree sweep and a fix for 'earlyprintk=efi,keep'.  It
  was using __init functions with predictably suboptimal results.

  Another key fix is a build fix which would produce output that simply
  would not decompress correctly in some configuration, due to the
  existing Makefiles picking up an unfortunate local label and mistaking
  it for the global symbol _end.

  Additional fixes include the handling of 64-bit numbers when setting
  the vdso data page (a latent bug which became manifest when i386
  started exporting a vdso with time functions), a fix to the new MSR
  manipulation accessors which would cause features to not get properly
  unblocked, a build fix for 32-bit userland, and a few new platform
  quirks"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall()
  x86: Fix typo in MSR_IA32_MISC_ENABLE_LIMIT_CPUID macro
  x86: Fix typo preventing msr_set/clear_bit from having an effect
  x86/intel: Add quirk to disable HPET for the Baytrail platform
  x86/hpet: Make boot_hpet_disable extern
  x86-64, build: Fix stack protector Makefile breakage with 32-bit userland
  x86/reboot: Add reboot quirk for Certec BPC600
  asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/*
  asmlinkage, x86: Add explicit __visible to arch/x86/*
  asmlinkage: Revert "lto: Make asmlinkage __visible"
  x86, build: Don't get confused by local symbols
  x86/efi: earlyprintk=efi,keep fix