- 22 1月, 2014 18 次提交
-
-
由 Goldwyn Rodrigues 提交于
We perform this because the DLM recovery callbacks will require the ocfs2_live_connection structure to record the node information when dlm_new_lockspace() is updated (in the last patch of the series). Before calling dlm_new_lockspace(), we need the structure ready for the .recover_done() callback, which would set oc_this_node. This is the reason we allocate ocfs2_live_connection beforehand in user_connect(). [AKPM] rc initialization is not required because it assigned in case of errors. It will be cleared by compiler anyways. Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com> Reveiwed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Goldwyn Rodrigues 提交于
These are the callbacks called by the fs/dlm code in case the membership changes. If there is a failure while/during calling any of these, the DLM creates a new membership and relays to the rest of the nodes. - recover_prep() is called when DLM understands a node is down. - recover_slot() is called once all nodes have acknowledged recover_prep and recovery can begin. - recover_done() is called once the recovery is complete. It returns the new membership. Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Goldwyn Rodrigues 提交于
This is an effort of removing ocfs2_controld.pcmk and getting ocfs2 DLM handling up to the times with respect to DLM (>=4.0.1) and corosync (2.3.x). AFAIK, cman also is being phased out for a unified corosync cluster stack. fs/dlm performs all the functions with respect to fencing and node management and provides the API's to do so for ocfs2. For all future references, DLM stands for fs/dlm code. The advantages are: + No need to run an additional userspace daemon (ocfs2_controld) + No controld device handling and controld protocol + Shifting responsibilities of node management to DLM layer For backward compatibility, we are keeping the controld handling code. Once enough time has passed we can remove a significant portion of the code. This was tested by using the kernel with changes on older unmodified tools. The kernel used ocfs2_controld as expected, and displayed the appropriate warning message. This feature requires modification in the userspace ocfs2-tools. The changes can be found at: https://github.com/goldwynr/ocfs2-tools branch: nocontrold Currently, not many checks are present in the userspace code, but that would change soon. This patch (of 6): Add clustername to cluster connection. Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Goldwyn Rodrigues 提交于
The versioning information is confusing for end-users. The numbers are stuck at 1.5.0 when the tools version have moved to 1.8.2. Remove the versioning system in the OCFS2 modules and let the kernel version be the guide to debug issues. Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com> Acked-by: NSunil Mushran <sunil.mushran@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: NJoel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Commit 5fbbf8a1 ("Score: The commit is for compiling successfully.") re-introduced "select HAVE_GENERIC_HARDIRQS" in v3.12-rc4, which had just been removed in v3.12-rc1 by 0244ad00 ("Remove GENERIC_HARDIRQ config option"). Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Williamson 提交于
dma_pte_free_level() has an off-by-one error when checking whether a pte is completely covered by a range. Take for example the case of attempting to free pfn 0x0 - 0x1ff, ie. 512 entries covering the first 2M superpage. The level_size() is 0x200 and we test: static void dma_pte_free_level(... ... if (!(0 > 0 || 0x1ff < 0 + 0x200)) { ... } Clearly the 2nd test is true, which means we fail to take the branch to clear and free the pagetable entry. As a result, we're leaking pagetables and failing to install new pages over the range. This was found with a PCI device assigned to a QEMU guest using vfio-pci without a VGA device present. The first 1M of guest address space is mapped with various combinations of 4K pages, but eventually the range is entirely freed and replaced with a 2M contiguous mapping. intel-iommu errors out with something like: ERROR: DMA PTE for vPFN 0x0 already set (to 5c2b8003 not 849c00083) In this case 5c2b8003 is the pointer to the previous leaf page that was neither freed nor cleared and 849c00083 is the superpage entry that we're trying to replace it with. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
We usually rely on the fact that struct members not specified in the initializer are set to NULL. So do that with fsnotify function pointers as well. Signed-off-by: NJan Kara <jack@suse.cz> Reviewed-by: NChristoph Hellwig <hch@lst.de> Cc: Eric Paris <eparis@parisplace.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
After removing event structure creation from the generic layer there is no reason for separate .should_send_event and .handle_event callbacks. So just remove the first one. Signed-off-by: NJan Kara <jack@suse.cz> Reviewed-by: NChristoph Hellwig <hch@lst.de> Cc: Eric Paris <eparis@parisplace.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Currently fsnotify framework creates one event structure for each notification event and links this event into all interested notification groups. This is done so that we save memory when several notification groups are interested in the event. However the need for event structure shared between inotify & fanotify bloats the event structure so the result is often higher memory consumption. Another problem is that fsnotify framework keeps path references with outstanding events so that fanotify can return open file descriptors with its events. This has the undesirable effect that filesystem cannot be unmounted while there are outstanding events - a regression for inotify compared to a situation before it was converted to fsnotify framework. For fanotify this problem is hard to avoid and users of fanotify should kind of expect this behavior when they ask for file descriptors from notified files. This patch changes fsnotify and its users to create separate event structure for each group. This allows for much simpler code (~400 lines removed by this patch) and also smaller event structures. For example on 64-bit system original struct fsnotify_event consumes 120 bytes, plus additional space for file name, additional 24 bytes for second and each subsequent group linking the event, and additional 32 bytes for each inotify group for private data. After the conversion inotify event consumes 48 bytes plus space for file name which is considerably less memory unless file names are long and there are several groups interested in the events (both of which are uncommon). Fanotify event fits in 56 bytes after the conversion (fanotify doesn't care about file names so its events don't have to have it allocated). A win unless there are four or more fanotify groups interested in the event. The conversion also solves the problem with unmount when only inotify is used as we don't have to grab path references for inotify events. [hughd@google.com: fanotify: fix corruption preventing startup] Signed-off-by: NJan Kara <jack@suse.cz> Reviewed-by: NChristoph Hellwig <hch@lst.de> Cc: Eric Paris <eparis@parisplace.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Rounding of name length when passing it to userspace was done in several places. Provide a function to do it and use it in all places. Signed-off-by: NJan Kara <jack@suse.cz> Reviewed-by: NChristoph Hellwig <hch@lst.de> Cc: Eric Paris <eparis@parisplace.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Williams 提交于
Record actively mapped pages and provide an api for asserting a given page is dma inactive before execution proceeds. Placing debug_dma_assert_idle() in cow_user_page() flagged the violation of the dma-api in the NET_DMA implementation (see commit 77873803 "net_dma: mark broken"). The implementation includes the capability to count, in a limited way, repeat mappings of the same page that occur without an intervening unmap. This 'overlap' counter is limited to the few bits of tag space in a radix tree. This mechanism is added to mitigate false negative cases where, for example, a page is dma mapped twice and debug_dma_assert_idle() is called after the page is un-mapped once. Signed-off-by: NDan Williams <dan.j.williams@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
Pull battery updates from Dmitry Eremin-Solenikov: "I'm picking up power supply maintainership from Anton Vorontov. Could you please pull battery-2.6 git tree changes prepared for the v3.14 release. Highlights: - Power supply notifier - Several drivers gained DT support - Added Maxim 14577 driver - Change of maintainer" * tag 'for-v3.14' of git://git.infradead.org/battery-2.6: MAINTAINERS: Pick up power supply maintainership max17042_battery: Add IRQF_ONESHOT flag to use default irq handler gpio-charger: Support wakeup events power_supply: Add charger support for Maxim 14577 dt: Binding documentation for isp1704 charger isp1704_charger: Add DT support charger-manager: of_cm_parse_desc() should be static bq2415x_charger: Add DT support power_supply: Add power_supply_get_by_phandle bq2415x_charger: Use power_supply notifier for automode power: reset: Add as3722 power-off driver mfd: AS3722: Add dt node properties for system power controller charger-manager: Support deivce tree in charger manager driver charger-manager: Modify the way of checking battery's temperature power_supply: Add power_supply notifier
-
git://git.linaro.org/people/ljones/mfd由 Linus Torvalds 提交于
Pull MFD changes from Lee Jones: "New drivers - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and Battery Charger - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM Generator Existing driver adaptions - Expansion of Wolfson Arizona DSP and High-Pass filter controls - TI TWL6040 default Regmap support and Regcache addition/bypass - Some nice Smatch catch fixes - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness - ChromeOS EC timing (delay) adaptions and added dependency on OF - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}' - Watchdog support added for NVIDIA AS3722 - Convert functions to static in TI AM335x - Realigned previously defeated functionality in TI AM335x - IIO ADC-TSC concurrency dead-lock/timeout resolution - Addition of Power Management and Clock support for Samsung core - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem - Greater use of irqdomain functionality in ST-E AB8500 - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h' - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/ - Device Tree documentation added for TI/Nat Semi LP3943 - Version detection and voltage tables for TI TPS6586x PMIC devices - Simplification of Freescale MC13XXX (de-)initialisation routines - Clean-up and simplification of the Realtek parent driver - Added support for RTL8402 Realtek PCI-Express card reader - Resource leak fix for Maxim 77686 - Possible suspend BUG() fix in OMAP USB TLL - Support for new Wolfson WM5110 Revision (D) - Testing of automatic assignment of of_node in mfd_add_device() - Reversion of the above when it started to cause issues - Remove legacy Platform Data from; TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL' removal, unused uninitialised warning mitigation, error message clarity, removal of redundant/duplicate checks, licensing (GPL -> GPL2), coding consistency, duplicate function declaration, ret checks, commit corrections, redundant of_match_ptr() helper removal, spelling, #if-deffery removal and header guards name changes" * tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits) mfd: wm5110: Add register patch for rev D chip mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync() gpio: lp3943: Remove redundant of_match_ptr helper mfd: sta2x11-mfd: Use named constants for pci_power_t values Documentation: mfd: Fix LDO index in s2mps11.txt mfd: Cleanup mfd-mcp-sa11x0.h header mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code. mfd: twl6030: Fix endianness problem in IRQ handler mfd: sec-core: Add cells for S5M8767-clocks mfd: max14577: Remove redundant of_match_ptr helper mfd: twl6040: Fix sparse non static symbol warning mfd: Revert "mfd: Always assign of_node in mfd_add_device()" mfd: rtsx: Fix sparse non static symbol warning mfd: max77693: Set proper maximum register for MUIC regmap mfd: max77686: Fix regmap resource leak on driver remove mfd: Represent correct filenames in file headers mfd: rtsx: Add support for card reader rtl8402 mfd: rtsx: Add set pull control macro and simplify rtl8411 mfd: max8997: Enforce mfd_add_devices() return value check mfd: mc13xxx: Simplify probe() & remove() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound updates from Takashi Iwai: "It was holiday season, so no wonder that there are little changes in framework level, although diffstat shows quite many changes spreaded over sound/* directories. Most of changes are cleanups, code refactoring and fixes. Some highlights: - Removal of OSS sleep_on usages by Arnd - Simplified memalloc helper codes, drop obsoleted features; now it's built into PCM driver instead of an individual module - Warn if PCM buffer preallocation fails, which will show page allocation issues more clearly - Compress offload API updates for sample rates by Vinod - PCM glitch workaround on ctxfi emu20k1 by Sarah - Drop cs46xx DSP blobs, using firmware loader now - USB-audio quitks for Plantronics Gamecom 780, Creative VF0420, and Focusrite Saffire 6 HD-audio specifics: - Standardize Kconfigs of HD-audio codec drivers; now "make localmodconfig" recognizes configs properly (finally!) - Parallel PM implementation by Mengdong - BayleyBay/ValleyView2 board fixups - Broadwell audio support - Runtime PM improvement (PantherPoint, etc) - Quirks: Dell subwooer, Gigabyte mobo jack detection oddity, Dell AiO click noise fixes, Dell headset mic fixes, etc - Automatic bind with HDMI codec parser without generic parser - More AD codec fixes (since 3.12 regression) including the automatic stereo mix support - Common Thinkpad ACPI helper for Realtek and Conexant codecs ASoC specifics: - Update to the generic DMA code to support deferred probe and managed resources - New drivers for BCM2835 (used in Raspberry Pi), Tegra with MAX98090 and Analog Devices AXI I2S and S/PDIF controller IPs - Device tree support for the simple card, max98090 and cs42l52 - Conversion of the Samsung drivers to native dmaengine, making them multiplatform compatible and hopefully helping keep them more modern and up to date. - More regmap conversions, including a very welcome one for twl6040 from Peter Ujfalusi - A big overhaul of the DaVinci drivers also from Peter Ujfalusi - Lots of DMA updates from Lars-Peter - Improvements to the constraints handling code from Lars-Peter - A very helpful conversion of the TWL4030 driver to regmap from Peter - A new driver for the Freescale ESAI controller from Nicolin Chen - Conversion of some of the drivers to use params_width() - Extensions to DPCM for use with compressed audio from Liam" * tag 'sound-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (396 commits) ASoC: dapm: Fix double prefix addition ASoC: compress: Add suport for DPCM into compressed audio ASoC: DPCM: make some DPCM API calls non static for compressed usage ASoC: core: Fix possible NULL pointer dereference of pcm->config ALSA: hda - add headset mic detect quirks for some Dell machines ASoC: tlv320aic32x4: Fix regmap range_min ASoC: core: Return -ENOTSUPP from set_sysclk() if no operation provided ASoC: dapm: Change prototype of soc_widget_read ASoC: samsung: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag ASoC: axi-{spdif,i2s}: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag ASoC: generic-dmaengine-pcm: Check DMA residue granularity ASoC: generic-dmaengine-pcm: Check NO_RESIDUE flag at runtime dma: pl330: Set residue_granularity dma: Indicate residue granularity in dma_slave_caps ASoC: simple-card: fix one bug to writing to the platform data ASoC: pcm: Use snd_pcm_rate_mask_intersect() helper ALSA: Add helper function for intersecting two rate masks ASoC: s6000: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates ASoC: pcm: Properly initialize hw->rate_max ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull bulk pin control changes from Linus Walleij: "This has been queued and tested for a while. Lots of action here, like in the GPIO tree, embedded stuff like this is really hot now it seems. Details in the signed tag. I'm especially happy about the Qualcomm driver as it is used in such a huge subset of mobile handsets out there, and these platforms in general need better upstream support - New driver for the Qualcomm TLMM pin controller and its msm8x74 subdriver. - New driver for the Broadcom Capri BCM281xx SoC. - New subdriver for the imx25 pin controller. - New subdriver for the Tegra124 pin controller. - Lock GPIO lines as IRQs for select combined pin control and GPIO drivers for baytrail and sirf. - Some semi-big refactorings and extenstions to the sirf driver. - Lots of patching, cleanup and fixing in the Renesas "PFC" driver and associated subdrivers as usual. It is settling down a little bit now it seems. - Minor fixes and incremental updates here and there as usual" * tag 'pinctrl-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: sunxi: Honor GPIO output initial vaules pinctrl: capri: add dependency on OF ARM: bcm11351: Enable pinctrl for Broadcom Capri SoCs ARM: pinctrl: Add Broadcom Capri pinctrl driver pinctrl: Add pinctrl binding for Broadcom Capri SoCs pinctrl: Add void * to pinctrl_pin_desc pinctrl: st: Fix a typo in probe pinctrl: Fix some typos and grammar issues in the documentation pinctrl: sirf: lock IRQs when starting them pinctrl: sirf: put gpio interrupt pin into input status automatically pinctrl: sirf: use only one irq_domain for the whole device node pinctrl: single: fix infinite loop caused by bad mask pinctrl: single: fix pcs_disable with bits_per_mux pinctrl: single: fix DT bindings documentation pinctrl: as3722: Set pin to output mode for some function pinctrl: sirf: add pin group for USP0 with only RX or TX frame sync pinctrl: sirf: fix the pins of sdmmc5 connected with TriG pinctrl: sirf: add lost usp1_uart_nostreamctrl group for atlas6 pinctrl: sunxi: Add Allwinner A20 clock output pin functions pinctrl/lantiq: fix typo ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO tree bulk changes from Linus Walleij: "A big set this merge window, as we have much going on in this subsystem. The changes to other subsystems (notably a slew of ARM machines as I am doing away with their custom APIs) have all been ACKed to the extent possible. Major changes this time: - Some core improvements and cleanups to the new GPIO descriptor API. This seems to be working now so we can start the exodus to this API, moving gradually away from the global GPIO numberspace. - Incremental improvements to the ACPI GPIO core, and move the few GPIO ACPI clients we have to the GPIO descriptor API right *now* before we go any further. We actually managed to contain this *before* we started to litter the kernel with yet another hackish global numberspace for the ACPI GPIOs, which is a big win. - The RFkill GPIO driver and all platforms using it have been migrated to use the GPIO descriptors rather than fixed number assignments. Tegra machine has been migrated as part of this. - New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x. Those should be really good examples of how I expect a nice GPIO driver to look these days. - Do away with custom GPIO implementations on a major part of the ARM machines: ks8695, lpc32xx, mv78xx0. Make a first step towards the same in the horribly convoluted Samsung S3C include forest. We expect to continue to clean this up as we move forward. - Flag GPIO lines used for IRQ on adnp, bcm-kona, em, intel-mid and lynxpoint. This makes the GPIOlib core aware that a certain GPIO line is used for IRQs and can then enforce some semantics such as disallowing a GPIO line marked as in use for IRQ to be switched to output mode. - Drop all use of irq_set_chip_and_handler_name(). The name provided in these cases were just unhelpful tags like "mux" or "demux". - Extend the MCP23s08 driver to handle interrupts. - Minor incremental improvements for rcar, lynxpoint, em 74x164 and msm drivers. - Some non-urgent bug fixes here and there, duplicate #includes and that usual kind of cleanups" Fix up broken Kconfig file manually to make this all compile. * tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits) gpio: mcp23s08: fix casting caused build warning gpio: mcp23s08: depend on OF_GPIO gpio: mcp23s08: Add irq functionality for i2c chips ARM: S5P[v210|c100|64x0]: Fix build error gpio: pxa: clamp gpio get value to [0,1] ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h> ARM: S3C[24|64]xx: move includes back under <mach/> scope Documentation / ACPI: update to GPIO descriptor API gpio / ACPI: get rid of acpi_gpio.h gpio / ACPI: register to ACPI events automatically mmc: sdhci-acpi: convert to use GPIO descriptor API ARM: s3c24xx: fix build error gpio: f7188x: set can_sleep attribute gpio: samsung: Update documentation gpio: samsung: Remove hardware.h inclusion gpio: xtensa: depend on HAVE_XTENSA_GPIO32 gpio: clps711x: Enable driver compilation with COMPILE_TEST gpio: clps711x: Use of_match_ptr() net: rfkill: gpio: convert to descriptor-based GPIO interface leds: s3c24xx: Fix build failure ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c updates from Wolfram Sang: "For 3.14, the I2C subsystem has the following to offer: - new drivers for Renesas RIIC and RobotFuzz OSIF - driver cleanups & improvements & bugfixes Pretty standard stuff this time, I'd say. There is more complex stuff coming up, but I didn't have the bandwidth between the years to pull it in for this release. Sadly" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (26 commits) i2c: s3c2410: fix quirk usage for 64-bit i2c: pnx: Use devm_*() functions i2c: at91: add a new compatibility string for the at91sam9261 i2c-ismt: support I2C_SMBUS_I2C_BLOCK_DATA transaction type i2c: Add bus driver for for OSIF USB i2c device. i2c: i2c-tiny-usb: Remove RobotFuzz USB vendor:product ID i2c: designware: remove HAVE_CLK build dependecy Documentation: i2c: Remove obsolete example i2c: nomadik: remove platform data header i2c: nomadik: auto-calculate slave setup time i2c: viperboard: remove superfluous assignment i2c: xilinx: Use devm_* functions i2c: xilinx: Do not enable irq before irq handler i2c: xilinx: Fix i2c checkpatch warnings i2c: at91: document clock properties i2c: isch: Use devm_request_region() i2c: viperboard: Use devm_kzalloc() functions i2c: imx: propagate irq error code in probe i2c: s3c2410: dont need CPU_FREQ transitions for exynos series i2c: s3c2410: Add polling mode support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull security layer updates from James Morris: "Changes for this kernel include maintenance updates for Smack, SELinux (and several networking fixes), IMA and TPM" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (39 commits) SELinux: Fix memory leak upon loading policy tpm/tpm-sysfs: active_show() can be static tpm: tpm_tis: Fix compile problems with CONFIG_PM_SLEEP/CONFIG_PNP tpm: Make tpm-dev allocate a per-file structure tpm: Use the ops structure instead of a copy in tpm_vendor_specific tpm: Create a tpm_class_ops structure and use it in the drivers tpm: Pull all driver sysfs code into tpm-sysfs.c tpm: Move sysfs functions from tpm-interface to tpm-sysfs tpm: Pull everything related to /dev/tpmX into tpm-dev.c char: tpm: nuvoton: remove unused variable tpm: MAINTAINERS: Cleanup TPM Maintainers file tpm/tpm_i2c_atmel: fix coccinelle warnings tpm/tpm_ibmvtpm: fix unreachable code warning (smatch warning) tpm/tpm_i2c_stm_st33: Check return code of get_burstcount tpm/tpm_ppi: Check return value of acpi_get_name tpm/tpm_ppi: Do not compare strcmp(a,b) == -1 ima: remove unneeded size_limit argument from ima_eventdigest_init_common() ima: update IMA-templates.txt documentation ima: pass HASH_ALGO__LAST as hash algo in ima_eventdigest_init() ima: change the default hash algorithm to SHA1 in ima_eventdigest_ng_init() ...
-
- 21 1月, 2014 22 次提交
-
-
由 Charles Keepax 提交于
Evaluation of revision D of WM5110 suggests updates to the register patch for optimal performance. For the sake of clarity rev C of the chip does not require a register patch. Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Roger Quadros 提交于
pm_runtime_get/put_sync() can sleep so don't hold spinlock while calling them. This patch prevents a BUG() during system suspend when CONFIG_DEBUG_ATOMIC_SLEEP is enabled. Bug is present in Kernel versions v3.9 onwards. Reported-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: NRoger Quadros <rogerq@ti.com> Tested-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Sachin Kamat 提交于
'lp3943_gpio_of_match' is always compiled in. Hence the helper macro is not needed. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Julia Lawall 提交于
If nothing more than to improve code readability. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev; @@ pci_set_power_state(pdev, - 0 + PCI_D0 ) // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Sachin Kamat 提交于
LDO indices start from 1. Fix the example appropriately. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Sachin Kamat 提交于
Commit a1fd844c ("ARM: sa1100: move platform_data definitions") moved the file to the current location but forgot to remove the pointer to its previous location. Clean it up. While at it also change the header file protection macros appropriately. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Manish Badarkhe 提交于
Instead of "#if define CONFIG_OF" use "IS_ENABLED(CONFIG_OF)" option for DT code to avoid if-deffery in code. Signed-off-by: NManish Badarkhe <badarkhe.manish@gmail.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Danke Xie 提交于
The current TWL 6030 IRQ handler assumes little endianness. This change makes it endian-neutral. Signed-off-by: NDanke Xie <d.xie@sta.samsung.com> Signed-off-by: NTaras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Tushar Behera 提交于
S5M8767 chip has 3 crystal oscillators running at 32KHz. These are supported by s2mps11-clk driver. Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Sachin Kamat 提交于
'max14577_dt_match' is always compiled in. Hence the helper macro is not needed. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Wei Yongjun 提交于
Fixes the following sparse warning: drivers/mfd/twl6040.c:89:20: warning: symbol 'twl6040_patch' was not declared. Should it be static? Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Lee Jones 提交于
This reverts commit 68044bee13770918e0b28dd44aa98c889ec7558f. We've had confirmed reports of this patch causing unforeseen issues with existing MFD users. It has been agreed by the original author and myself that reversion is the best solution. Acked-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Wei Yongjun 提交于
Fixes the following sparse warning: drivers/mfd/rtl8411.c:473:6: warning: symbol 'rtl8411_init_common_params' was not declared. Should it be static? Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Krzysztof Kozlowski 提交于
The MUIC block in max77693 has different I2C address than PMIC. The driver allocated two regmaps: for PMIC and MUIC. However it used the same regmap_config (with max_register field) for both regmaps. Actual maximum address of register for MUIC is different than for PMIC. Define another regmap_config for MUIC with proper max_register value. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Krzysztof Kozlowski 提交于
The regmap used by max77686 MFD driver was not freed with regmap_exit() on driver exit. This lead to leak of resources. Replace regmap_init_i2c() call in driver probe with initialization of managed register map so the regmap will be properly freed by the device management code. Cc: stable@vger.kernel.org Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Laszlo Papp 提交于
The original author(s) probably copy/pasted these headers from the existing public header files. Signed-off-by: NLaszlo Papp <lpapp@kde.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Micky Ching 提交于
rtl8402 is much like rtl8411, so just add it to rtl8411.c Signed-off-by: NMicky Ching <micky_ching@realsil.com.cn> Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Micky Ching 提交于
Add set pull control macro to reduce code for setting pull control, and use a common init function to reduce code for rtl8411.c. So this patch is used to just simplify code. Signed-off-by: NMicky Ching <micky_ching@realsil.com.cn> Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Laszlo Papp 提交于
The original author provided a random return value check which is redundant and seemingly floating. This patch not only relocates the check so it is more clearly associated with the invokation of mfd_add_devices(), but provides a store for the error value. We also print a meaningful message on error before returning. Signed-off-by: NLaszlo Papp <lpapp@kde.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Alexander Shiyan 提交于
This patch simplifies probe() and remove() functions by moving some initialisation code out from the I2C/SPI init() and exit() functions and into the core driver. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Alexander Shiyan 提交于
Symbol MFD_MC13783 always selected by MFD_MC13XXX, so no need to keep additional symbol. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Alexander Shiyan 提交于
mc13xxx_get_flags() declaration given twice. This patch removes this duplicate. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-