Only failure that get_state_failrec can get is if there is no failure
for the given address. There is no reason why the function should return
a status code and use a separate parameter for returning the actual
failure rec (if one is found). Simplify it by making the return type
a pointer and return ERR_PTR value in case of errors.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The option subvolrootid used to be a workaround for mounting subvolumes
and ineffective since 5e2a4b25 ("btrfs: deprecate subvolrootid mount
option"). We have subvol= that works and we don't need to keep the
cruft, let's remove it.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The mount option alloc_start has no effect since 0d0c71b3 ("btrfs:
obsolete and remove mount option alloc_start") which has details why
it's been deprecated. We can remove it.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When syncing the log, we used to update the log root tree without holding
neither the log_mutex of the subvolume root nor the log_mutex of log root
tree.

We used to have two critical sections delimited by the log_mutex of the
log root tree, so in the first one we incremented the log_writers of the
log root tree and on the second one we decremented it and waited for the
log_writers counter to go down to zero. This was because the update of
the log root tree happened between the two critical sections.

The use of two critical sections allowed a little bit more of parallelism
and required the use of the log_writers counter, necessary to make sure
we didn't miss any log root tree update when we have multiple tasks trying
to sync the log in parallel.

However after commit 06989c79 ("Btrfs: fix race updating log root
item during fsync") the log root tree update was moved into a critical
section delimited by the subvolume's log_mutex. Later another commit
moved the log tree update from that critical section into the second
critical section delimited by the log_mutex of the log root tree. Both
commits addressed different bugs.

The end result is that the first critical section delimited by the
log_mutex of the log root tree became pointless, since there's nothing
done between it and the second critical section, we just have an unlock
of the log_mutex followed by a lock operation. This means we can merge
both critical sections, as the first one does almost nothing now, and we
can stop using the log_writers counter of the log root tree, which was
incremented in the first critical section and decremented in the second
criticial section, used to make sure no one in the second critical section
started writeback of the log root tree before some other task updated it.

So just remove the mutex_unlock() followed by mutex_lock() of the log root
tree, as well as the use of the log_writers counter for the log root tree.

This patch is part of a series that has the following patches:

1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree

After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:

  mkfs.btrfs -f /dev/sdk
  mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
  dbench -D /mnt/sdk -t 300 8
  umount /mnt/dsk

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We are incrementing the log_batch atomic counter of the root log tree but
we never use that counter, it's used only for the log trees of subvolume
roots. We started doing it when we moved the log_batch and log_write
counters from the global, per fs, btrfs_fs_info structure, into the
btrfs_root structure in commit 7237f183 ("Btrfs: fix tree logs
parallel sync").

So just stop doing it for the log root tree and add a comment over the
field declaration so inform it's used only for log trees of subvolume
roots.

This patch is part of a series that has the following patches:

1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree

After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:

  mkfs.btrfs -f /dev/sdk
  mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
  dbench -D /mnt/sdk -t 300 8
  umount /mnt/dsk

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When logging an inode we are committing its delayed items if either the
inode is a directory or if it is a new inode, created in the current
transaction.

We need to do it for directories, since new directory indexes are stored
as delayed items of the inode and when logging a directory we need to be
able to access all indexes from the fs/subvolume tree in order to figure
out which index ranges need to be logged.

However for new inodes that are not directories, we do not need to do it
because the only type of delayed item they can have is the inode item, and
we are guaranteed to always log an up to date version of the inode item:

*) for a full fsync we do it by committing the delayed inode and then
   copying the item from the fs/subvolume tree with
   copy_inode_items_to_log();

*) for a fast fsync we always log the inode item based on the contents of
   the in-memory struct btrfs_inode. We guarantee this is always done since
   commit e4545de5 ("Btrfs: fix fsync data loss after append write").

So stop running delayed items for a new inodes that are not directories,
since that forces committing the delayed inode into the fs/subvolume tree,
wasting time and adding contention to the tree when a full fsync is not
required. We will only do it in case a fast fsync is needed.

This patch is part of a series that has the following patches:

1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree

After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:

  mkfs.btrfs -f /dev/sdk
  mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
  dbench -D /mnt/sdk -t 300 8
  umount /mnt/dsk

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Commit 2c2c452b ("Btrfs: fix fsync when extend references are added
to an inode") forced a commit of the delayed inode when logging an inode
in order to ensure we would end up logging the inode item during a full
fsync. By committing the delayed inode, we updated the inode item in the
fs/subvolume tree and then later when copying items from leafs modified in
the current transaction into the log tree (with copy_inode_items_to_log())
we ended up copying the inode item from the fs/subvolume tree into the log
tree. Logging an up to date version of the inode item is required to make
sure at log replay time we get the link count fixup triggered among other
things (replay xattr deletes, etc). The test case generic/040 from fstests
exercises the bug which that commit fixed.

However for a fast fsync we don't need to commit the delayed inode because
we always log an up to date version of the inode item based on the struct
btrfs_inode we have in-memory. We started doing this for fast fsyncs since
commit e4545de5 ("Btrfs: fix fsync data loss after append write").

So just stop committing the delayed inode if we are doing a fast fsync,
we are only wasting time and adding contention on fs/subvolume tree.

This patch is part of a series that has the following patches:

1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree

After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:

  mkfs.btrfs -f /dev/sdk
  mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
  dbench -D /mnt/sdk -t 300 8
  umount /mnt/dsk

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

[BUG]
When the anonymous block device pool is exhausted, subvolume/snapshot
creation fails with EMFILE (Too many files open). This has been reported
by a user. The allocation happens in the second phase during transaction
commit where it's only way out is to abort the transaction

  BTRFS: Transaction aborted (error -24)
  WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
  RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
  Call Trace:
   create_pending_snapshots+0x82/0xa0 [btrfs]
   btrfs_commit_transaction+0x275/0x8c0 [btrfs]
   btrfs_mksubvol+0x4b9/0x500 [btrfs]
   btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
   btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
   btrfs_ioctl+0x11a4/0x2da0 [btrfs]
   do_vfs_ioctl+0xa9/0x640
   ksys_ioctl+0x67/0x90
   __x64_sys_ioctl+0x1a/0x20
   do_syscall_64+0x5a/0x110
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ---[ end trace 33f2f83f3d5250e9 ]---
  BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
  BTRFS info (device sda1): forced readonly
  BTRFS warning (device sda1): Skipping commit of aborted transaction.
  BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown

[CAUSE]
When the global anonymous block device pool is exhausted, the following
call chain will fail, and lead to transaction abort:

 btrfs_ioctl_snap_create_v2()
 |- btrfs_ioctl_snap_create_transid()
    |- btrfs_mksubvol()
       |- btrfs_commit_transaction()
          |- create_pending_snapshot()
             |- btrfs_get_fs_root()
                |- btrfs_init_fs_root()
                   |- get_anon_bdev()

[FIX]
Although we can't enlarge the anonymous block device pool, at least we
can preallocate anon_dev for subvolume/snapshot in the first phase,
outside of transaction context and exactly at the moment the user calls
the creation ioctl.
Reported-by: NGreed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

[BUG]
When a lot of subvolumes are created, there is a user report about
transaction aborted caused by slow anonymous block device reclaim:

  BTRFS: Transaction aborted (error -24)
  WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
  RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
  Call Trace:
   create_pending_snapshots+0x82/0xa0 [btrfs]
   btrfs_commit_transaction+0x275/0x8c0 [btrfs]
   btrfs_mksubvol+0x4b9/0x500 [btrfs]
   btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
   btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
   btrfs_ioctl+0x11a4/0x2da0 [btrfs]
   do_vfs_ioctl+0xa9/0x640
   ksys_ioctl+0x67/0x90
   __x64_sys_ioctl+0x1a/0x20
   do_syscall_64+0x5a/0x110
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ---[ end trace 33f2f83f3d5250e9 ]---
  BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
  BTRFS info (device sda1): forced readonly
  BTRFS warning (device sda1): Skipping commit of aborted transaction.
  BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown

[CAUSE]
The anonymous device pool is shared and its size is 1M. It's possible to
hit that limit if the subvolume deletion is not fast enough and the
subvolumes to be cleaned keep the ids allocated.

[WORKAROUND]
We can't avoid the anon device pool exhaustion but we can shorten the
time the id is attached to the subvolume root once the subvolume becomes
invisible to the user.
Reported-by: NGreed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

[BUG]
When a lot of subvolumes are created, there is a user report about
transaction aborted:

  BTRFS: Transaction aborted (error -24)
  WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
  RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
  Call Trace:
   create_pending_snapshots+0x82/0xa0 [btrfs]
   btrfs_commit_transaction+0x275/0x8c0 [btrfs]
   btrfs_mksubvol+0x4b9/0x500 [btrfs]
   btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
   btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
   btrfs_ioctl+0x11a4/0x2da0 [btrfs]
   do_vfs_ioctl+0xa9/0x640
   ksys_ioctl+0x67/0x90
   __x64_sys_ioctl+0x1a/0x20
   do_syscall_64+0x5a/0x110
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ---[ end trace 33f2f83f3d5250e9 ]---
  BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
  BTRFS info (device sda1): forced readonly
  BTRFS warning (device sda1): Skipping commit of aborted transaction.
  BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown

[CAUSE]
The error is EMFILE (Too many files open) and comes from the anonymous
block device allocation. The ids are in a shared pool of size 1<<20.

The ids are assigned to live subvolumes, ie. the root structure exists
in memory (eg. after creation or after the root appears in some path).
The pool could be exhausted if the numbers are not reclaimed fast
enough, after subvolume deletion or if other system component uses the
anon block devices.

[WORKAROUND]
Since it's not possible to completely solve the problem, we can only
minimize the time the id is allocated to a subvolume root.

Firstly, we can reduce the use of anon_dev by trees that are not
subvolume roots, like data reloc tree.

This patch will do extra check on root objectid, to skip roots that
don't need anon_dev.  Currently it's only data reloc tree and orphan
roots.
Reported-by: NGreed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This patch will add the following sysfs interface:

  /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/referenced
  /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/exclusive
  /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/max_referenced
  /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/max_exclusive
  /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/limit_flags

Which is also available in output of "btrfs qgroup show".

  /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/rsv_data
  /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/rsv_meta_pertrans
  /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/rsv_meta_prealloc

The last 3 rsv related members are not visible to users, but can be very
useful to debug qgroup limit related bugs.

Also, to avoid '/' used in <qgroup_id>, the separator between qgroup
level and qgroup id is changed to '_'.

The interface is not hidden behind 'debug' as we want this interface to
be included into production build and to provide another way to read the
qgroup information besides the ioctls.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The qgroup level is limited to u16, so no need to use u64 for it.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

vfs_inode is used only for the inode number everything else requires
btrfs_inode.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ use btrfs_ino ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Instead of making multiple calls to BTRFS_I simply take btrfs_inode as
an input paramter.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The vfs inode is only used for a pair of inode_lock/unlock calls all
other uses call for btrfs_inode.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

All of its children functions use btrfs_inode.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

All of its children take btrfs_inode so bubble up this requirement to
btrfs_delalloc_reserve_space's interface and stop calling BTRFS_I
internally.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Instead of calling BTRFS_I on the passed vfs_inode take btrfs_inode
directly.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It needs btrfs_inode so take it as a parameter directly.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It only uses btrfs_inode internally so take it as a parameter.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

No point in taking an inode only to get btrfs_fs_info from it, instead
take btrfs_fs_info directly.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There's only a single use of vfs_inode in a tracepoint so let's take
btrfs_inode directly.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There is a single use of the generic vfs_inode so let's take btrfs_inode
as a parameter and remove couple of redundant BTRFS_I() calls.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Preparation to make btrfs_dirty_pages take btrfs_inode as parameter.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Only find_lock_delalloc_range uses vfs_inode so let's take the
btrfs_inode as a parameter.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It has only a single use for a generic vfs inode vs 3 for btrfs_inode.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This function really needs a btrfs_inode and not a generic vfs one. Take
it as a parameter and get rid of superfluous BTRFS_I() calls.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Take btrfs_inode directly and stop using superfulous BTRFS_I calls.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Simply forwards its argument so let's get rid of one extra BTRFS_I by
taking btrfs_inode directly.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

All children now take btrfs_inode so convert it to taking it as a
parameter as well.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Gets rid of superfulous BTRFS_I() calls and prepare for converting
btrfs_run_delalloc_range to using btrfs_inode.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Simply gets rid of superfluous BTRFS_I() calls.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Gets rid of superfluous BTRFS_I() calls.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Preparation to converting btrfs_run_delalloc_range to using btrfs_inode
without BTRFS_I() calls.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It really wants btrfs_inode.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It doesn't really need vfs_inode but btrfs_inode.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It only uses vfs inode for assigning it to the async_chunk function.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It only really uses btrfs_inode.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It really wants btrfs_inode and is prepration to converting
run_delalloc_nocow to taking btrfs_inode.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>c
Signed-off-by: NDavid Sterba <dsterba@suse.com>