- 11 3月, 2014 4 次提交
-
-
由 Ben Hutchings 提交于
The help text for CONFIG_PGTABLE_MAPPING has an incorrect URL. While we're at it, remove the unnecessary footnote notation. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NMinchan Kim <minchan@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Artem Fetishev 提交于
The expected logic of proc_map_files_get_link() is either to return 0 and initialize 'path' or return an error and leave 'path' uninitialized. By the time dname_to_vma_addr() returns 0 the corresponding vma may have already be gone. In this case the path is not initialized but the return value is still 0. This results in 'general protection fault' inside d_path(). Steps to reproduce: CONFIG_CHECKPOINT_RESTORE=y fd = open(...); while (1) { mmap(fd, ...); munmap(fd, ...); } ls -la /proc/$PID/map_files Addresses https://bugzilla.kernel.org/show_bug.cgi?id=68991Signed-off-by: NArtem Fetishev <artem_fetishev@epam.com> Signed-off-by: NAleksandr Terekhov <aleksandr_terekhov@epam.com> Reported-by: <wiebittewas@gmail.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Acked-by: NCyrill Gorcunov <gorcunov@openvz.org> Reviewed-by: N"Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Laura Abbott 提交于
We received several reports of bad page state when freeing CMA pages previously allocated with alloc_contig_range: BUG: Bad page state in process Binder_A pfn:63202 page:d21130b0 count:0 mapcount:1 mapping: (null) index:0x7dfbf page flags: 0x40080068(uptodate|lru|active|swapbacked) Based on the page state, it looks like the page was still in use. The page flags do not make sense for the use case though. Further debugging showed that despite alloc_contig_range returning success, at least one page in the range still remained in the buddy allocator. There is an issue with isolate_freepages_block. In strict mode (which CMA uses), if any pages in the range cannot be isolated, isolate_freepages_block should return failure 0. The current check keeps track of the total number of isolated pages and compares against the size of the range: if (strict && nr_strict_required > total_isolated) total_isolated = 0; After taking the zone lock, if one of the pages in the range is not in the buddy allocator, we continue through the loop and do not increment total_isolated. If in the last iteration of the loop we isolate more than one page (e.g. last page needed is a higher order page), the check for total_isolated may pass and we fail to detect that a page was skipped. The fix is to bail out if the loop immediately if we are in strict mode. There's no benfit to continuing anyway since we need all pages to be isolated. Additionally, drop the error checking based on nr_strict_required and just check the pfn ranges. This matches with what isolate_freepages_range does. Signed-off-by: NLaura Abbott <lauraa@codeaurora.org> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: NMichal Nazarewicz <mina86@mina86.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
GFP_THISNODE is for callers that implement their own clever fallback to remote nodes. It restricts the allocation to the specified node and does not invoke reclaim, assuming that the caller will take care of it when the fallback fails, e.g. through a subsequent allocation request without GFP_THISNODE set. However, many current GFP_THISNODE users only want the node exclusive aspect of the flag, without actually implementing their own fallback or triggering reclaim if necessary. This results in things like page migration failing prematurely even when there is easily reclaimable memory available, unless kswapd happens to be running already or a concurrent allocation attempt triggers the necessary reclaim. Convert all callsites that don't implement their own fallback strategy to __GFP_THISNODE. This restricts the allocation a single node too, but at the same time allows the allocator to enter the slowpath, wake kswapd, and invoke direct reclaim if necessary, to make the allocation happen when memory is full. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NRik van Riel <riel@redhat.com> Cc: Jan Stancek <jstancek@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 3月, 2014 10 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from from Olof Johansson: "A collection of fixes for ARM platforms. A little large due to us missing to do one last week, but there's nothing in particular here that is in itself large and scary. Mostly a handful of smaller fixes all over the place. The majority is made up of fixes for OMAP, but there are a few for others as well. In particular, there was a decision to rename a binding for the Broadcom pinctrl block that we need to go in before the final release since we then treat it as ABI" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: omap3-gta04: Add ti,omap36xx to compatible property to avoid problems with booting ARM: tegra: add LED options back into tegra_defconfig ARM: dts: omap3-igep: fix boot fail due wrong compatible match ARM: OMAP3: Fix pinctrl interrupts for core2 pinctrl: Rename Broadcom Capri pinctrl binding pinctrl: refer to updated dt binding string. Update dtsi with new pinctrl compatible string ARM: OMAP: Kill warning in CPUIDLE code with !CONFIG_SMP ARM: OMAP2+: Add support for thumb mode on DT booted N900 ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4 ARM: DRA7: hwmod data: correct the sysc data for spinlock ARM: OMAP5: PRM: Fix reboot handling ARM: sunxi: dt: Change the touchscreen compatibles ARM: sun7i: dt: Fix interrupt trigger types
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - Fix another nfs4_sequence corruptor in RELEASE_LOCKOWNER - Fix an Oopsable delegation callback race - Fix another bad stateid infinite loop - Fail the data server I/O is the stateid represents a lost lock - Fix an Oopsable sunrpc trace event" * tag 'nfs-for-3.14-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Fix oops when trace sunrpc_task events in nfs client NFSv4: Fail the truncate() if the lock/open stateid is invalid NFSv4.1 Fail data server I/O if stateid represents a lost lock NFSv4: Fix the return value of nfs4_select_rw_stateid NFSv4: nfs4_stateid_is_current should return 'true' for an invalid stateid NFS: Fix a delegation callback race NFSv4: Fix another nfs4_sequence corruptor
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are 4 USB fixes for your current tree. Two of them are reverts to hopefully resolve the nasty XHCI regressions we have been having on some types of devices. The other two are quirks for some Logitech video devices" * tag 'usb-3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "USBNET: ax88179_178a: enable tso if usb host supports sg dma" Revert "xhci 1.0: Limit arbitrarily-aligned scatter gather." usb: Make DELAY_INIT quirk wait 100ms between Get Configuration requests usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver tree fix from Greg KH: "Here is a single staging driver fix for your tree. It resolves an issue with arbritary writes to memory if a specific driver is loaded" * tag 'staging-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging/cxt1e1/linux.c: Correct arbitrary memory write in c4_ioctl()
-
由 David Howells 提交于
This fixes CVE-2014-0102. The following command sequence produces an oops: keyctl new_session i=`keyctl newring _ses @s` keyctl link @s $i The problem is that search_nested_keyrings() sees two keyrings that have matching type and description, so keyring_compare_object() returns true. s_n_k() then passes the key to the iterator function - keyring_detect_cycle_iterator() - which *should* check to see whether this is the keyring of interest, not just one with the same name. Because assoc_array_find() will return one and only one match, I assumed that the iterator function would only see an exact match or never be called - but the iterator isn't only called from assoc_array_find()... The oops looks something like this: kernel BUG at /data/fs/linux-2.6-fscache/security/keys/keyring.c:1003! invalid opcode: 0000 [#1] SMP ... RIP: keyring_detect_cycle_iterator+0xe/0x1f ... Call Trace: search_nested_keyrings+0x76/0x2aa __key_link_check_live_key+0x50/0x5f key_link+0x4e/0x85 keyctl_keyring_link+0x60/0x81 SyS_keyctl+0x65/0xe4 tracesys+0xdd/0xe2 The fix is to make keyring_detect_cycle_iterator() check that the key it has is the key it was actually looking for rather than calling BUG_ON(). A testcase has been included in the keyutils testsuite for this: http://git.kernel.org/cgit/linux/kernel/git/dhowells/keyutils.git/commit/?id=891f3365d07f1996778ade0e3428f01878a1790bReported-by: NTommi Rantala <tt.rantala@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NJames Morris <james.l.morris@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux由 Linus Torvalds 提交于
Pull thermal fixes from Zhang Rui: "Specifics: - Update the help text of INT3403 Thermal driver, which was not friendly to users. From Zhang Rui. - The "type" sysfs attribute of x86_pkg_temp_thermal registered thermal zones includes an instance number, which makes the thermal-to-hwmon bridge fails to group them all in a single hwmon device. Fixed by Jean Delvare. - The hwmon device registered by x86_pkg_temp_thermal driver is redundant because the temperature value reported by x86_pkg_temp_thermal is already reported by the coretemp driver. Fixed by Jean Delvare. - Fix a problem that the cooling device can not be updated properly if it is initialized at max cooling state. From Ni Wade. - Fix a problem that OF registered thermal zones are running without thermal governors. From Zhang Rui. - Commit beeb5a1e ("thermal: rcar-thermal: Enable driver compilation with COMPILE_TEST") broke build on archs wihout io memory. Thus make it depend on HAS_IOMEM to bypass build failures. Fixed by Richard Weinberger" * 'for-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Thermal: thermal zone governor fix Thermal: Allow first update of cooling device state thermal,rcar_thermal: Add dependency on HAS_IOMEM x86_pkg_temp_thermal: Fix the thermal zone type x86_pkg_temp_thermal: Do not expose as a hwmon device Thermal: update INT3404 thermal driver help text
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi fixes from Mark Brown: "A scattering of driver specific fixes here. The fixes from Axel cover bitrot in apparently unmaintained drivers, the at79 bug is fixing a glitch on /CS during initialisation of some devices which could break some slaves and the remainder are fixes for recently introduced bugs from the past release cycle or so" * tag 'spi-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: atmel: add missing spi_master_{resume,suspend} calls to PM callbacks spi: coldfire-qspi: Fix getting correct address for *mcfqspi spi: fsl-dspi: Fix getting correct address for master spi: spi-ath79: fix initial GPIO CS line setup spi: spi-imx: spi_imx_remove: do not disable disabled clocks spi-topcliff-pch: Fix probing when DMA mode is used spi/topcliff-pch: Fix DMA channel
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "This series addresses a number of outstanding issues wrt to active I/O shutdown using iser-target. This includes: - Fix a long standing tpg_state bug where a tpg could be referenced during explicit shutdown (v3.1+ stable) - Use list_del_init for iscsi_cmd->i_conn_node so list_empty checks work as expected (v3.10+ stable) - Fix a isert_conn->state related hung task bug + ensure outstanding I/O completes during session shutdown. (v3.10+ stable) - Fix isert_conn->post_send_buf_count accounting for RDMA READ/WRITEs (v3.10+ stable) - Ignore FRWR completions during active I/O shutdown (v3.12+ stable) - Fix command leakage for interrupt coalescing during active I/O shutdown (v3.13+ stable) Also included is another DIF emulation fix from Sagi specific to v3.14-rc code" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: Target/sbc: Fix sbc_copy_prot for offset scatters iser-target: Fix command leak for tx_desc->comp_llnode_batch iser-target: Ignore completions for FRWRs in isert_cq_tx_work iser-target: Fix post_send_buf_count for RDMA READ/WRITE iscsi/iser-target: Fix isert_conn->state hung shutdown issues iscsi/iser-target: Use list_del_init for ->i_conn_node iscsi-target: Fix iscsit_get_tpg_from_np tpg_state bug
-
由 Rafael J. Wysocki 提交于
Revert commit 3130497f ("ACPI / sleep: pm_power_off needs more sanity checks to be installed") that breaks power ACPI power off on a lot of systems, because it checks wrong registers. Fixes: 3130497f ("ACPI / sleep: pm_power_off needs more sanity checks to be installed") Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 3月, 2014 9 次提交
-
-
由 Olof Johansson 提交于
Merge tag 'omap-for-v3.14/fixes-dt-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Two omap3430 vs 3630 device tree regression fixes for issues booting 3430 based boards. * tag 'omap-for-v3.14/fixes-dt-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3-gta04: Add ti,omap36xx to compatible property to avoid problems with booting ARM: dts: omap3-igep: fix boot fail due wrong compatible match Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://github.com/broadcom/bcm11351由 Olof Johansson 提交于
Merge 'bcm pinctrl rename' From Christin Daudt: Rename pinctrl dt binding to restore consistency with other bcm mobile bindings. * tag 'bcm-for-3.14-pinctrl-reduced-rename' of git://github.com/broadcom/bcm11351: pinctrl: Rename Broadcom Capri pinctrl binding pinctrl: refer to updated dt binding string. Update dtsi with new pinctrl compatible string + Linux 3.14-rc4 Signed-off-by: NOlof Johansson <olof@lixom.net>
-
https://github.com/mripard/linux由 Olof Johansson 提交于
Allwinner fixes from Maxime Ripard: Two fixes for device trees additions that got added in 3.14. One fixes the interrupt types of some IPs, the other fixes up a compatible that got introduced during 3.14 * tag 'sunxi-fixes-for-3.14' of https://github.com/mripard/linux: ARM: sunxi: dt: Change the touchscreen compatibles ARM: sun7i: dt: Fix interrupt trigger types Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: "Two cpuset locking fixes from Li. Both tagged for -stable" * 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: fix a race condition in __cpuset_node_allowed_softwall() cpuset: fix a locking issue in cpuset_migrate_mm()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "Just a couple patches blacklisting more broken devices" * 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8 (2BA30001) libata: disable queued TRIM for Crucial M500 mSATA SSDs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue fix from Tejun Heo: "This pull request contains a workqueue usage fix for firewire. For quite a long time now, workqueue only treats two work items identical iff both their addresses and callbacks match. This is to avoid introducing false dependency through the work item being recycled while being executed. This changes non-reentrancy guarantee for the users of PREPARE[_DELAYED]_WORK() - if the function changes, reentrancy isn't guaranteed against the previous instance. Firewire depended on such nonreentrancy guarantee. This is fixed by doing the work item multiplexing from firewire proper while keeping the work function unchanged" * 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: firewire: don't use PREPARE_DELAYED_WORK
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394由 Linus Torvalds 提交于
Pull firewire fixes from Stefan Richter: "Fix a use-after-free regression since v3.4 and an initialization regression since v3.10" * tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: fix probe failure with Agere/LSI controllers firewire: net: fix use after free
-
git://git.linaro.org/people/mike.turquette/linux由 Linus Torvalds 提交于
Pull clk driver fix from Mike Turquette: "Single fix for a clock driver merged in 3.14-rc1. Without this fix the CPU frequency cannot be scaled" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: shmobile: rcar-gen2: Use kick bit to allow Z clock frequency change
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from Rafael Wysocki: - ACPI tables in some BIOSes list device resources with size equal to 0, which doesn't make sense, so we should ignore them, but instead we try to use them and mangle things completely. Fix from Zhang Rui. - Several models of Samsung laptops accumulate EC events when they are in sleep states which leads to EC buffer overflows that prevent new events from being signaled after system resume or reboot. This has been affecting many users for quite a while and may be addressed by clearing the EC buffer during system resume and system startup on those machines. From Kieran Clancy. - If the ACPI sleep control and status registers are not present (which happens if the Hardware Reduced ACPI mode bit is set in the ACPI tables, but also may result from BIOS bugs), we should not try to use ACPI to power off the system and ACPI S5 should not be listed as supported. Fix from Aubrey Li. - There's a race condition in cpufreq_get() that leads to a kernel crash if that function is called at a wrong time. Fix from Aaron Plattner. - cpufreq policy objects have to be initialized entirely before they are first accessed by their users which isn't the case currently and that potentially leads to various kinds of breakage that is difficult to debug. Fix from Viresh Kumar. - Locking is missing in __cpufreq_add_dev() which leads to a race condition that may trigger a kernel crash. Fix from Viresh Kumar. * tag 'pm+acpi-3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / EC: Clear stale EC events on Samsung systems cpufreq: Initialize governor for a new policy under policy->rwsem cpufreq: Initialize policy before making it available for others to use cpufreq: use cpufreq_cpu_get() to avoid cpufreq_get() race conditions ACPI / sleep: pm_power_off needs more sanity checks to be installed ACPI / resources: ignore invalid ACPI device resources
-
- 08 3月, 2014 17 次提交
-
-
由 Linus Torvalds 提交于
It's an enum, not a #define, you can't use it in asm files. Introduced in commit 5fa10196 ("x86: Ignore NMIs that come in during early boot"), and sadly I didn't compile-test things like I should have before pushing out. My weak excuse is that the x86 tree generally doesn't introduce stupid things like this (and the ARM pull afterwards doesn't cause me to do a compile-test either, since I don't cross-compile). Cc: Don Zickus <dzickus@redhat.com> Cc: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "A number of ARM updates for -rc, covering mostly ARM specific code, but with one change to modpost.c to allow Thumb section mismatches to be detected. ARM changes include reporting when an attempt is made to boot a LPAE kernel on hardware which does not support LPAE, rather than just being silent about it. A number of other minor fixes are included too" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 7992/1: boot: compressed: ignore bswapsdi2.S ARM: 7991/1: sa1100: fix compile problem on Collie ARM: fix noMMU kallsyms symbol filtering ARM: 7980/1: kernel: improve error message when LPAE config doesn't match CPU ARM: 7964/1: Detect section mismatches in thumb relocations ARM: 7963/1: mm: report both sections from PMD
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Peter Anvin: "A small collection of minor fixes. The FPU stuff is still pending, I fear. I haven't heard anything from Suresh so I suspect I'm going to have to dig into the init specifics myself and fix up the patchset" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Ignore NMIs that come in during early boot x86, trace: Further robustify CR2 handling vs tracing x86, trace: Fix CR2 corruption when tracing page faults x86/efi: Quirk out SGI UV
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull power fixes from Ben Herrenschmidt: "Here are a couple of powerpc fixes for 3.14. One is (another!) nasty TM problem, we can crash the kernel by forking inside a transaction. The other one is a simple fix for an alignment issue which can hurt in LE mode" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Align p_dyn, p_rela and p_st symbols powerpc/tm: Fix crash when forking inside a transaction
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "In the past, I've had lots of reports about trace events not working. Developers would say they put a trace_printk() before and after the trace event but when they enable it (and the trace event said it was enabled) they would see the trace_printks but not the trace event. I was not able to reproduce this, but that's because I wasn't looking at the right location. Recently, another bug came up that showed the issue. If your kernel supports signed modules but allows for non-signed modules to be loaded, then when one is, the kernel will silently set the MODULE_FORCED taint on the module. Although, this taint happens without the need for insmod --force or anything of the kind, it labels the module with that taint anyway. If this tainted module has tracepoints, the tracepoints will be ignored because of the MODULE_FORCED taint. But no error message will be displayed. Worse yet, the event infrastructure will still be created letting users enable the trace event represented by the tracepoint, although that event will never actually be enabled. This is because the tracepoint infrastructure allows for non-existing tracepoints to be enabled for new modules to arrive and have their tracepoints set. Although there are several things wrong with the above, this change only addresses the creation of the trace event files for tracepoints that are not created when a module is loaded and is tainted. This change will print an error message about the module being tainted and not the trace events will not be created, and it does not create the trace event infrastructure" * tag 'trace-fixes-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not add event files for modules that fail tracepoints
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: - a bugfix for a long standing waitqueue race - a trivial fix for a missing include * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Include missing header file in irqdomain.c genirq: Remove racy waitqueue_active check
-
由 Ditang Chen 提交于
When tracking sunrpc_task events in nfs client, the clnt pointer may be NULL. [ 139.269266] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 139.269915] IP: [<ffffffffa026f216>] ftrace_raw_event_rpc_task_running+0x86/0xf0 [sunrpc] [ 139.269915] PGD 1d293067 PUD 1d294067 PMD 0 [ 139.269915] Oops: 0000 [#1] SMP [ 139.269915] Modules linked in: nfsv4 dns_resolver nfs lockd sunrpc fscache sg ppdev e1000 serio_raw pcspkr parport_pc parport i2c_piix4 i2c_core microcode xfs libcrc32c sd_mod sr_mod cdrom ata_generic crc_t10dif crct10dif_common pata_acpi ahci libahci ata_piix libata dm_mirror dm_region_hash dm_log dm_mod [ 139.269915] CPU: 0 PID: 59 Comm: kworker/0:2 Not tainted 3.10.0-84.el7.x86_64 #1 [ 139.269915] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 139.269915] Workqueue: rpciod rpc_async_schedule [sunrpc] [ 139.269915] task: ffff88001b598000 ti: ffff88001b632000 task.ti: ffff88001b632000 [ 139.269915] RIP: 0010:[<ffffffffa026f216>] [<ffffffffa026f216>] ftrace_raw_event_rpc_task_running+0x86/0xf0 [sunrpc] [ 139.269915] RSP: 0018:ffff88001b633d70 EFLAGS: 00010206 [ 139.269915] RAX: ffff88001dfc5338 RBX: ffff88001cc37a00 RCX: ffff88001dfc5334 [ 139.269915] RDX: ffff88001dfc5338 RSI: 0000000000000000 RDI: ffff88001dfc533c [ 139.269915] RBP: ffff88001b633db0 R08: 000000000000002c R09: 000000000000000a [ 139.269915] R10: 0000000000062180 R11: 00000020759fb9dc R12: ffffffffa0292c20 [ 139.269915] R13: ffff88001dfc5334 R14: 0000000000000000 R15: 0000000000000000 [ 139.269915] FS: 0000000000000000(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 [ 139.269915] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 139.269915] CR2: 0000000000000004 CR3: 000000001d290000 CR4: 00000000000006f0 [ 139.269915] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 139.269915] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 139.269915] Stack: [ 139.269915] 000000001b633d98 0000000000000246 ffff88001df1dc00 ffff88001cc37a00 [ 139.269915] ffff88001bc35e60 0000000000000000 ffff88001ffa0a48 ffff88001bc35ee0 [ 139.269915] ffff88001b633e08 ffffffffa02704b5 0000000000010000 ffff88001cc37a70 [ 139.269915] Call Trace: [ 139.269915] [<ffffffffa02704b5>] __rpc_execute+0x1d5/0x400 [sunrpc] [ 139.269915] [<ffffffffa0270706>] rpc_async_schedule+0x26/0x30 [sunrpc] [ 139.269915] [<ffffffff8107867b>] process_one_work+0x17b/0x460 [ 139.269915] [<ffffffff8107942b>] worker_thread+0x11b/0x400 [ 139.269915] [<ffffffff81079310>] ? rescuer_thread+0x3e0/0x3e0 [ 139.269915] [<ffffffff8107fc80>] kthread+0xc0/0xd0 [ 139.269915] [<ffffffff8107fbc0>] ? kthread_create_on_node+0x110/0x110 [ 139.269915] [<ffffffff815d122c>] ret_from_fork+0x7c/0xb0 [ 139.269915] [<ffffffff8107fbc0>] ? kthread_create_on_node+0x110/0x110 [ 139.269915] Code: 4c 8b 45 c8 48 8d 7d d0 89 4d c4 41 89 c9 b9 28 00 00 00 e8 9d b4 e9 e0 48 85 c0 49 89 c5 74 a2 48 89 c7 e8 9d 3f e9 e0 48 89 c2 <41> 8b 46 04 48 8b 7d d0 4c 89 e9 4c 89 e6 89 42 0c 0f b7 83 d4 [ 139.269915] RIP [<ffffffffa026f216>] ftrace_raw_event_rpc_task_running+0x86/0xf0 [sunrpc] [ 139.269915] RSP <ffff88001b633d70> [ 139.269915] CR2: 0000000000000004 [ 140.946406] ---[ end trace ba486328b98d7622 ]--- Signed-off-by: NDitang Chen <chendt.fnst@cn.fujitsu.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Rafael J. Wysocki 提交于
* pm-cpufreq: cpufreq: Initialize governor for a new policy under policy->rwsem cpufreq: Initialize policy before making it available for others to use cpufreq: use cpufreq_cpu_get() to avoid cpufreq_get() race conditions
-
由 Rafael J. Wysocki 提交于
* acpi-resources: ACPI / resources: ignore invalid ACPI device resources * acpi-ec: ACPI / EC: Clear stale EC events on Samsung systems * acpi-sleep: ACPI / sleep: pm_power_off needs more sanity checks to be installed
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: - dm-cache memory allocation failure fix - fix DM's Kconfig identation - dm-snapshot metadata corruption fix for bug introduced in 3.14-rc1 - important refcount < 0 fix for the DM persistent data library's space map metadata interface which fixes corruption reported by a few dm-thinp users and last but not least: - more extensive fixes than ideal for dm-thinp's data resize capability (which has had growing pain much like we've seen from -ENOSPC handling of filesystems that mature). The end result is dm-thinp now handles metadata operation failure and no data space error conditions much better than before. * tag 'dm-3.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm space map metadata: fix refcount decrement below 0 which caused corruption dm thin: fix Documentation for held metadata root feature dm thin: fix noflush suspend IO queueing dm thin: fix deadlock in __requeue_bio_list dm thin: fix out of data space handling dm thin: ensure user takes action to validate data and metadata consistency dm thin: synchronize the pool mode during suspend dm snapshot: fix metadata corruption dm: fix Kconfig indentation dm cache mq: fix memory allocation failure for large cache devices
-
由 H. Peter Anvin 提交于
Don Zickus reports: A customer generated an external NMI using their iLO to test kdump worked. Unfortunately, the machine hung. Disabling the nmi_watchdog made things work. I speculated the external NMI fired, caused the machine to panic (as expected) and the perf NMI from the watchdog came in and was latched. My guess was this somehow caused the hang. ---- It appears that the latched NMI stays latched until the early page table generation on 64 bits, which causes exceptions to happen which end in IRET, which re-enable NMI. Therefore, ignore NMIs that come in during early execution, until we have proper exception handling. Reported-and-tested-by: NDon Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1394221143-29713-1-git-send-email-dzickus@redhat.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> # v3.5+, older with some backport effort
-
由 Mark Rutland 提交于
Commit 017f161a (ARM: 7877/1: use built-in byte swap function) added bswapsdi2.{o,S} to arch/arm/boot/compressed/Makefile, but didn't update the .gitignore. Thus after a a build git status shows bswapsdi2.S as a new file, which is a little annoying. This patch updates arch/arm/boot/compressed/.gitignore to ignore bswapsdi2.S, as we already do for ashldi3.S and others. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NKim Phillips <kim.phillips@freescale.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Walleij 提交于
Due to a problem in the MFD Kconfig it was not possible to compile the UCB battery driver for the Collie SA1100 system, in turn making it impossible to compile in the battery driver. (See patch "mfd: include all drivers in subsystem menu".) After fixing the MFD Kconfig (separate patch) a compile error appears in the Collie battery driver due to the <mach/collie.h> implicitly requiring <mach/hardware.h> through <linux/gpio.h> via <mach/gpio.h> prior to commit 40ca061b "ARM: 7841/1: sa1100: remove complex GPIO interface". Fix this up by including the required header into <mach/collie.h>. Cc: stable@vger.kernel.org Cc: Andrea Adami <andrea.adami@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
With noMMU, CONFIG_PAGE_OFFSET was not being set correctly. As there's no MMU, PAGE_OFFSET should be equal to PHYS_OFFSET in all cases. This commit makes that explicit. Since we do this, we don't need to mess around in asm/memory.h with ifdefs to sort this out, so let's get rid of that, and there's no point offering the "Memory split" option for noMMU as that's meaningless there. Fixes: b9b32bf7 ("ARM: use linker magic for vectors and vector stubs") Cc: <stable@vger.kernel.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mathias Nyman 提交于
This reverts commit 3804fad4. This commit, together with commit 247bf557 "xhci 1.0: Limit arbitrarily-aligned scatter gather." were origially added to get xHCI 1.0 hosts and usb ethernet ax88179_178a devices working together with scatter gather. xHCI 1.0 hosts pose some requirement on how transfer buffers are aligned, setting this requirement for 1.0 hosts caused USB 3.0 mass storage devices to fail more frequently. USB 3.0 mass storage devices used to work before 3.14-rc1. Theoretically, the TD fragment rules could have caused an occasional disk glitch. Now the devices *will* fail, instead of theoretically failing. >From a user perspective, this looks like a regression; the USB device obviously fails on 3.14-rc1, and may sometimes silently fail on prior kernels. The proper soluition is to implement the TD fragment rules for xHCI 1.0 hosts, but for now, revert this patch until scatter gather can be properly supported. Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mathias Nyman 提交于
This reverts commit 247bf557. This commit, together with commit 3804fad4 "USBNET: ax88179_178a: enable tso if usb host supports sg dma" were origially added to get xHCI 1.0 hosts and usb ethernet ax88179_178a devices working together with scatter gather. xHCI 1.0 hosts pose some requirement on how transfer buffers are aligned, setting this requirement for 1.0 hosts caused USB 3.0 mass storage devices to fail more frequently. USB 3.0 mass storage devices used to work before 3.14-rc1. Theoretically, the TD fragment rules could have caused an occasional disk glitch. Now the devices *will* fail, instead of theoretically failing. >From a user perspective, this looks like a regression; the USB device obviously fails on 3.14-rc1, and may sometimes silently fail on prior kernels. The proper soluition is to implement the TD fragment rules required, but for now this patch needs to be reverted to get USB 3.0 mass storage devices working at the level they used to. Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Julius Werner 提交于
The DELAY_INIT quirk only reduces the frequency of enumeration failures with the Logitech HD Pro C920 and C930e webcams, but does not quite eliminate them. We have found that adding a delay of 100ms between the first and second Get Configuration request makes the device enumerate perfectly reliable even after several weeks of extensive testing. The reasons for that are anyone's guess, but since the DELAY_INIT quirk already delays enumeration by a whole second, wating for another 10th of that isn't really a big deal for the one other device that uses it, and it will resolve the problems with these webcams. Signed-off-by: NJulius Werner <jwerner@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-