Memory amount is increased before a successful write-read
sequence is done. Thus, 512 kB of onboard memory is detected
on memoryless cards like SB32.

Move the increasing of memory counter after successful read
is done.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The direction of rounding is incorrect in the snd_interval_ratnum()
It was detected with following parameters (sb8 driver playing
8kHz stereo file):
 - num is always 1000000
 - requested frequency rate is from 7999 to 7999 (single frequency)

The first loop calculates div_down(num, freq->min) which is 125.
Thus, a frequency range's minimum value is 1000000 / 125 = 8000 Hz.
The second loop calculates div_up(num, freq->max) which is 126
The frequency range's maximum value is 1000000 / 126 = 7936 Hz.
The range maximum is lower than the range minimum so the function
fails due to empty result range.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current Realtek code makes no specific provision for turning stuff
off. The codec chip is placed into low-power mode generically, but this
doesn't turn off any external hardware connected to it, in particular
external amplifiers.

This patch creates a hook function that is called by the codec
suspend/resume functions. It ought to disable any external hardware in a
device-specific way. I've implemented a generic ALC889 function that
sets the EAPD pin properly, and used it for the Acer Aspire 8930G which
can benefit from this feature.

On my laptop, this results in ~0.5W extra savings.
Signed-off-by: NHector Martin <hector@marcansoft.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch removes some extra mixers that do nothing on the Acer Aspire
8930G.

The CD mixer is useless because the SATA DVD/Blu-Ray drive has no analog
audio output, and the Side mixer is useless because we max out at 6ch
anyway.
Signed-off-by: NHector Martin <hector@marcansoft.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch just simplifies the 8930G verb array a bit. Just use the
common ALC889 EAPD verb array to make things more consistent. The file
is already huge enough already.
Signed-off-by: NHector Martin <hector@marcansoft.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://bugs.launchpad.net/bugs/479373

The OR has verified with hda-verb that the internal microphone needs
VREF50 set for audible capture.
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use kzalloc rather than kcalloc(1,...)

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
@@

- kcalloc(1,
+ kzalloc(
          ...)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We can use finer-grained locking, which makes things easier when
we gain DMA support.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since the recording and playback paths are now the same, eliminate
the needless conditionals.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There's no need for a specific rule; ALSA's generic AC'97 support
calculates the necessary rate constraint information itself, and
we can use this directly.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed a typo of the max buffer size specified for buffer allocation
changed in the commit d6797322.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The wm8974 datasheet defines BUFIOEN as bit 2.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

When allocating the PCM buffer, use vmalloc_user() instead of vmalloc().
Otherwise, it would be possible for applications to play the previous
contents of the kernel memory to the speakers, or to read it directly if
the buffer is exported to userspace.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Works fine with the auto-parser.

Reference: Novell bnc#564940
	https://bugzilla.novell.com/show_bug.cgi?id=564940Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Merge branch 'cpumask-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus

* 'cpumask-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  cpumask: rename tsk_cpumask to tsk_cpus_allowed
  cpumask: don't recommend set_cpus_allowed hack in Documentation/cpu-hotplug.txt
  cpumask: avoid dereferencing struct cpumask
  cpumask: convert drivers/idle/i7300_idle.c to cpumask_var_t
  cpumask: use modern cpumask style in drivers/scsi/fcoe/fcoe.c
  cpumask: avoid deprecated function in mm/slab.c
  cpumask: use cpu_online in kernel/perf_event.c

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  Keys: KEYCTL_SESSION_TO_PARENT needs TIF_NOTIFY_RESUME architecture support
  NOMMU: Optimise away the {dac_,}mmap_min_addr tests
  security/min_addr.c: make init_mmap_min_addr() static
  keys: PTR_ERR return of wrong pointer in keyctl_get_security()

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP3: serial - fix bug introduced in
  mfd: twl: fix twl4030 rename for remaining driver, board files
  USB ehci: replace mach header with plat
  omap3: Allow EHCI to be built on OMAP3

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (w83627hf) Fix for "No such device"
  hwmon: (sht15) Off-by-one error in array index + incorrect constants
  hwmon: Add driver for VIA CPU core temperature
  hwmon: (smsc47m1) Enable device if needed
  hwmon: (smsc47m1) Fail module loading on error
  hwmon: (smsc47m1) Only request I/O ports we really use
  hwmon: New driver for AMD Family 10h/11h CPUs

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (40 commits)
  [SCSI] 3w-9xxx fix bug in sgl loading
  [SCSI] fcoe, libfc: adds enable/disable for fcoe interface
  [SCSI] libfc: reduce hold time on SCSI host lock
  [SCSI] libfc: remote port gets stuck in restart state without really restarting
  [SCSI] pm8001: misc code cleanup
  [SCSI] pm8001: enable read HBA SAS address from VPD
  [SCSI] pm8001: do not reset local sata as it will not be found if reset
  [SCSI] pm8001: bit set pm8001_ha->flags
  [SCSI] pm8001:fix potential NULL pointer dereference
  [SCSI] pm8001: set SSC down-spreading only to get less errors on some 6G device.
  [SCSI] pm8001: fix endian issues with SAS address
  [SCSI] pm8001: enhance error handle for IO patch
  [SCSI] pm8001: Fix for sata io circular lock dependency.
  [SCSI] hpsa: add driver for HP Smart Array controllers.
  [SCSI] cxgb3i: always use negative errno in case of error
  [SCSI] bnx2i: minor code cleanup and update driver version
  [SCSI] bnx2i: Task management ABORT TASK fixes
  [SCSI] bnx2i: update CQ arming algorith for 5771x chipsets
  [SCSI] bnx2i: Adjust sq_size module parametr to power of 2 only if a non-zero value is specified
  [SCSI] bnx2i: Add 5771E device support to bnx2i driver
  ...

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (71 commits)
  MIPS: Lasat: Fix botched changes to sysctl code.
  RTC: rtc-cmos.c: Fix warning on MIPS
  MIPS: Cleanup random differences beween lmo and Linus' kernel.
  MIPS: No longer hardwire CONFIG_EMBEDDED to y
  MIPS: Fix and enhance built-in kernel command line
  MIPS: eXcite: Remove platform.
  MIPS: Loongson: Cleanups of serial port support
  MIPS: Lemote 2F: Suspend CS5536 MFGPT Timer
  MIPS: Excite: move iodev_remove to .devexit.text
  MIPS: Lasat: Convert to proc_fops / seq_file
  MIPS: Cleanup signal code initialization
  MIPS: Modularize COP2 handling
  MIPS: Move EARLY_PRINTK to Kconfig.debug
  MIPS: Yeeloong 2F: Cleanup reset logic using the new ec_write function
  MIPS: Yeeloong 2F: Add LID open event as the wakeup event
  MIPS: Yeeloong 2F: Add basic EC operations
  MIPS: Move several variables from .bss to .init.data
  MIPS: Tracing: Make function graph tracer work with -mmcount-ra-address
  MIPS: Tracing: Reserve $12(t0) for mcount-ra-address of gcc 4.5
  MIPS: Tracing: Make ftrace for MIPS work without -fno-omit-frame-pointer
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: make sure fallocate properly starts a transaction
  Btrfs: make metadata chunks smaller
  Btrfs: Show discard option in /proc/mounts
  Btrfs: deny sys_link across subvolumes.
  Btrfs: fail mount on bad mount options
  Btrfs: don't add extent 0 to the free space cache v2
  Btrfs: Fix per root used space accounting
  Btrfs: Fix btrfs_drop_extent_cache for skip pinned case
  Btrfs: Add delayed iput
  Btrfs: Pass transaction handle to security and ACL initialization functions
  Btrfs: Make truncate(2) more ENOSPC friendly
  Btrfs: Make fallocate(2) more ENOSPC friendly
  Btrfs: Avoid orphan inodes cleanup during committing transaction
  Btrfs: Avoid orphan inodes cleanup while replaying log
  Btrfs: Fix disk_i_size update corner case
  Btrfs: Rewrite btrfs_drop_extents
  Btrfs: Add btrfs_duplicate_item
  Btrfs: Avoid superfluous tree-log writeout

* 'kmemleak' of git://linux-arm.org/linux-2.6:
  kmemleak: fix kconfig for crc32 build error
  kmemleak: Reduce the false positives by checking for modified objects
  kmemleak: Show the age of an unreferenced object
  kmemleak: Release the object lock before calling put_object()
  kmemleak: Scan the _ftrace_events section in modules
  kmemleak: Simplify the kmemleak_scan_area() function prototype
  kmemleak: Do not use off-slab management with SLAB_NOLEAKTRACE

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6:
  spi: spi_txx9.c: use resource_size()
  spi: spi_sh_sci.c: use resource_size()
  spi: spi_mpc8xxx.c: use resource_size()
  spi: spi_bfin5xx.c: use resource_size()
  spi: atmel_spi.c: use resource_size()
  spi: Add s3c64xx SPI Controller driver
  atmel_spi: fix dma addr calculation for len > BUFFER_SIZE
  spi_s3c24xx: add FIQ pseudo-DMA support
  spi: controller driver for Designware SPI core
  spidev: add proper section markers
  spidev: use DECLARE_BITMAP instead of declaring the array

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  backlight: mbp_nvidia_bl - add two more MacBookPro variants
  backlight: Pass device through notify callback in the pwm driver
  backlight: PTR_ERR return of wrong pointer in cr_backlight_probe()
  backlight: Constify struct backlight_ops
  backlight/thinkpad-acpi: issue backlight class events

Fix up trivial conflicts in thinkpad-acpi support (backlight support
already merged earlier).

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: leds-pwm: Set led_classdev max_brightness
  leds: leds-lp3944.h - remove unneeded includes
  leds: use default-on trigger for Cobalt Qube
  leds: drivers/leds/leds-ss4200.c: fix return statement
  leds: leds-pca9532.h- indent with tabs, not spaces
  leds: Add LED class driver for regulator driven LEDs.
  leds: leds-cobalt-qube.c: use resource_size()
  leds: leds-cobalt-raq.c - use resource_size()
  leds: Add driver for ADP5520/ADP5501 MFD PMICs
  leds: Add driver for LT3593 controlled LEDs
  leds-ss4200: Check pci_enable_device return
  leds: leds-alix2c - take port address from MSR
  leds: LED driver for Intel NAS SS4200 series (v5)

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  PCMCIA: fix pxa2xx_lubbock modular build error
  [ARM] Update mach-types
  [ARM] pxa: fix no reference of cpu_is_pxa25x() in devices.c
  [ARM] pxa/cm-x300: add PWM backlight support
  revert "[ARM] pxa/cm-x300: add PWM backlight support"
  ARM: use flush_kernel_dcache_area() for dmabounce
  ARM: add size argument to __cpuc_flush_dcache_page
  ARM: 5848/1: kill flush_ioremap_region()
  ARM: cache-l2x0: make better use of background cache handling
  ARM: cache-l2x0: avoid taking spinlock for every iteration
  [ARM] Kirkwood: Add LaCie Network Space v2 support
  ARM: dove: fix the mm mmu flags of the pj4 procinfo

Fix kernel-doc warnings in printk.c:

Warning(kernel/printk.c:1422): No description found for parameter 'dumper'
Warning(kernel/printk.c:1422): Excess function parameter 'dump' description in 'kmsg_dump_register'
Warning(kernel/printk.c:1451): No description found for parameter 'dumper'
Warning(kernel/printk.c:1451): Excess function parameter 'dump' description in 'kmsg_dump_unregister'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I added blk_run_backing_dev on page_cache_async_readahead so readahead I/O
is unpluged to improve throughput on especially RAID environment.

The normal case is, if page N become uptodate at time T(N), then T(N) <=
T(N+1) holds.  With RAID (and NFS to some degree), there is no strict
ordering, the data arrival time depends on runtime status of individual
disks, which breaks that formula.  So in do_generic_file_read(), just
after submitting the async readahead IO request, the current page may well
be uptodate, so the page won't be locked, and the block device won't be
implicitly unplugged:

               if (PageReadahead(page))
                        page_cache_async_readahead()
                if (!PageUptodate(page))
                                goto page_not_up_to_date;
                //...
page_not_up_to_date:
                lock_page_killable(page);

Therefore explicit unplugging can help.

Following is the test result with dd.

#dd if=testdir/testfile of=/dev/null bs=16384

-2.6.30-rc6
1048576+0 records in
1048576+0 records out
17179869184 bytes (17 GB) copied, 224.182 seconds, 76.6 MB/s

-2.6.30-rc6-patched
1048576+0 records in
1048576+0 records out
17179869184 bytes (17 GB) copied, 206.465 seconds, 83.2 MB/s

(7Disks RAID-0 Array)

-2.6.30-rc6
1054976+0 records in
1054976+0 records out
17284726784 bytes (17 GB) copied, 212.233 seconds, 81.4 MB/s

-2.6.30-rc6-patched
1054976+0 records out
17284726784 bytes (17 GB) copied, 198.878 seconds, 86.9 MB/s

(7Disks RAID-5 Array)

The patch was found to improve performance with the SCST scsi target
driver.  See
http://sourceforge.net/mailarchive/forum.php?thread_name=a0272b440906030714g67eabc5k8f847fb1e538cc62%40mail.gmail.com&forum_name=scst-devel

[akpm@linux-foundation.org: unbust comment layout]
[akpm@linux-foundation.org: "fix" CONFIG_BLOCK=n]
Signed-off-by: NHisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Acked-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by: NRonald <intercommit@gmail.com>
Cc: Bart Van Assche <bart.vanassche@gmail.com>
Cc: Vladislav Bolkhovitin <vst@vlnb.net>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

RTC core won't allow wakeup alarms to be set if RTC devices' parent (i.e.
i2c_client or spi_device) isn't wakeup capable.

For I2C devices there is I2C_CLIENT_WAKE flag exists that we can pass via
board info, and if set, I2C core will initialize wakeup capability.  For
SPI devices there is no such flag at all.

I believe that it's not platform code responsibility to allow or disallow
wakeups, instead, drivers themselves should set the capability if a device
can trigger wakeups.

That's what drivers/base/power/sysfs.c says:

 * It is the responsibility of device drivers to enable (or disable)
 * wakeup signaling as part of changing device power states, respecting
 * the policy choices provided through the driver model.

I2C and SPI RTC devices send wakeup events via interrupt lines, so we
should set the wakeup capability if IRQ is routed.

Ideally we should also check irq for wakeup capability before setting
device's capability, i.e.

	if (can_irq_wake(irq))
		device_set_wakeup_capable(&client->dev, 1);

But there is no can_irq_wake() call exist, and it is not that trivial to
implement it for all interrupts controllers and complex/cascaded setups.

drivers/base/power/sysfs.c also covers these cases:

 * Devices may not be able to generate wakeup events from all power
 * states.  Also, the events may be ignored in some configurations;
 * for example, they might need help from other devices that aren't
 * active

So there is no guarantee that wakeup will actually work, and so I think
there is no point in being pedantic wrt checking IRQ wakeup capability.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the Secure Digital Host Controller Interface found on the
"Hollywood" chipset of the Nintendo Wii video game console.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch breaks down sdhci-of into a core portion and a eSDHC portion,
clearing the path to easily support additional hardware using the same OF
driver.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>