Skip to content

L
linux

xiphi1978 / linux

通知 2
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 28 1月, 2015 1 次提交
  3. 17 1月, 2015 1 次提交
    • N
      perf tools: Fix building error in x86_64 when dwarf unwind is on · c6e5e9fb
      由 Namhyung Kim 提交于 
      When build with 'make ARCH=x86' and dwarf unwind is on, there is a
compiling error:

   CC       /home/wn/perf/arch/x86/util/unwind-libdw.o
   CC       /home/wn/perf/arch/x86/tests/regs_load.o
 arch/x86/tests/regs_load.S: Assembler messages:
 arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push'
 arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop'
 make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1
 make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24!
 make: *** [all] Error 2
 ...

Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT.
'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'.
However, when building x86_64 kernel, ARCH=x86 is valid and commonly
used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86'
to build x86_64 perf, which causes mismatching.

As __LP64__ is defined for x86_64 as well, we can consolidate the
__x86_64__ check to the __LP64__ check and get rid of the IS_X86_64
IMHO.

(This patch is made by Namhyung Kim when replying my v1 patch:

https://lkml.org/lkml/2015/1/7/17

I modified the code to remove dependency on RAW_ARCH:

https://lkml.org/lkml/2015/1/7/865

Namhyung Kim didn't provide his SOB in his original email. I add
mine only for my modification.)
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1421029255-23039-1-git-send-email-wangnan0@huawei.com
[ Namhyung provided his S-o-B on a followup to this patch thread on lkml ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c6e5e9fb
  5. 19 11月, 2014 1 次提交
  7. 05 11月, 2014 1 次提交
    • N
      perf tools: Add gzip decompression support for kernel module · e92ce12e
      由 Namhyung Kim 提交于 
      Now my Archlinux box shows module symbols correctly.

Before:
  $ perf report --stdio
  Failed to open /tmp/perf-3477.map, continuing without symbols
  no symbols found in /usr/bin/date, maybe install a debug package?
  No kallsyms or vmlinux with build-id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 was found
  [drm] with build id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 not found, continuing without symbols
  No kallsyms or vmlinux with build-id edd931629094b660ca9dec09a1b635c8d87aa2ee was found
  [jbd2] with build id edd931629094b660ca9dec09a1b635c8d87aa2ee not found, continuing without symbols
  No kallsyms or vmlinux with build-id a7b1eada671c34933e5610bb920b2ca4945a82c3 was found
  [ext4] with build id a7b1eada671c34933e5610bb920b2ca4945a82c3 not found, continuing without symbols
  No kallsyms or vmlinux with build-id d69511fa3e5840e770336ef45b06c83fef8d74e3 was found
  [scsi_mod] with build id d69511fa3e5840e770336ef45b06c83fef8d74e3 not found, continuing without symbols
  No kallsyms or vmlinux with build-id af0430af13461af058770ee9b87afc07922c2e77 was found
  [libata] with build id af0430af13461af058770ee9b87afc07922c2e77 not found, continuing without symbols
  No kallsyms or vmlinux with build-id aaeedff8160ce631a5f0333591c6ff291201d29f was found
  [libahci] with build id aaeedff8160ce631a5f0333591c6ff291201d29f not found, continuing without symbols
  No kallsyms or vmlinux with build-id c57907712becaf662dc4981824bb372c0441d605 was found
  [mac80211] with build id c57907712becaf662dc4981824bb372c0441d605 not found, continuing without symbols
  No kallsyms or vmlinux with build-id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f was found
  [iwldvm] with build id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f not found, continuing without symbols
  No kallsyms or vmlinux with build-id 2d86086bf136bf374a2f029cf85a48194f9b950b was found
  [cfg80211] with build id 2d86086bf136bf374a2f029cf85a48194f9b950b not found, continuing without symbols
  No kallsyms or vmlinux with build-id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 was found
  [iwlwifi] with build id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 not found, continuing without symbols
  ...
  #
  # Overhead  Command          Shared Object            Symbol
  # ........  ...............  .......................  ........................................................
  #
       0.03%  swapper          [ext4]                   [k] 0x000000000000fe2e
       0.03%  swapper          [kernel.kallsyms]        [k] account_entity_enqueue
       0.03%  swapper          [ext4]                   [k] 0x000000000000fc2b
       0.03%  irq/50-iwlwifi   [iwlwifi]                [k] 0x000000000000200b
       0.03%  swapper          [kernel.kallsyms]        [k] ktime_add_safe
       0.03%  swapper          [kernel.kallsyms]        [k] elv_completed_request
       0.03%  swapper          [libata]                 [k] 0x0000000000003997
       0.03%  swapper          [libahci]                [k] 0x0000000000001f25
       0.03%  swapper          [kernel.kallsyms]        [k] rb_next
       0.03%  swapper          [kernel.kallsyms]        [k] blk_finish_request
       0.03%  swapper          [ext4]                   [k] 0x0000000000010248
       0.00%  perf             [kernel.kallsyms]        [k] native_write_msr_safe

After:
  $ perf report --stdio
  Failed to open /tmp/perf-3477.map, continuing without symbols
  no symbols found in /usr/bin/tr, maybe install a debug package?
  ...
  #
  # Overhead  Command          Shared Object                Symbol
  # ........  ...............  ...........................  ......................................................
  #

       0.04%  kworker/u16:3    [ext4]                       [k] ext4_read_block_bitmap
       0.03%  kworker/u16:0    [mac80211]                   [k] ieee80211_sta_reset_beacon_monitor
       0.02%  irq/50-iwlwifi   [mac80211]                   [k] ieee80211_get_bssid
       0.02%  firefox          [e1000e]                     [k] __ew32_prepare
       0.02%  swapper          [libahci]                    [k] ahci_handle_port_interrupt
       0.02%  emacs            libglib-2.0.so.0.4000.0      [.] g_mutex_unlock
       0.02%  swapper          [e1000e]                     [k] e1000_clean_tx_irq
       0.02%  dwm              [kernel.kallsyms]            [k] __schedule
       0.02%  gnome-terminal-  [vdso]                       [.] __vdso_clock_gettime
       0.02%  swapper          [e1000e]                     [k] e1000_alloc_rx_buffers
       0.02%  irq/50-iwlwifi   [mac80211]                   [k] ieee80211_rx
       0.01%  firefox          [vdso]                       [.] __vdso_gettimeofday
       0.01%  irq/50-iwlwifi   [iwlwifi]                    [k] iwl_pcie_rxq_restock.part.13
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/87h9yexshi.fsf@sejong.aot.lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e92ce12e
  9. 29 10月, 2014 2 次提交
  11. 18 9月, 2014 3 次提交
  13. 12 8月, 2014 2 次提交
  15. 17 7月, 2014 1 次提交
  17. 08 7月, 2014 1 次提交
  19. 27 6月, 2014 1 次提交
    • S
      perf tools powerpc: Adjust callchain based on DWARF debug info · a60335ba
      由 Sukadev Bhattiprolu 提交于 
      When saving the callchain on Power, the kernel conservatively saves excess
entries in the callchain. A few of these entries are needed in some cases
but not others. We should use the DWARF debug information to determine
when the entries are  needed.

Eg: the value in the link register (LR) is needed only when it holds the
return address of a function. At other times it must be ignored.

If the unnecessary entries are not ignored, we end up with duplicate arcs
in the call-graphs.

Use the DWARF debug information to determine if any callchain entries
should be ignored when building call-graphs.

Callgraph before the patch:

    14.67%          2234  sprintft  libc-2.18.so       [.] __random
            |
            --- __random
               |
               |--61.12%-- __random
               |          |
               |          |--97.15%-- rand
               |          |          do_my_sprintf
               |          |          main
               |          |          generic_start_main.isra.0
               |          |          __libc_start_main
               |          |          0x0
               |          |
               |           --2.85%-- do_my_sprintf
               |                     main
               |                     generic_start_main.isra.0
               |                     __libc_start_main
               |                     0x0
               |
                --38.88%-- rand
                          |
                          |--94.01%-- rand
                          |          do_my_sprintf
                          |          main
                          |          generic_start_main.isra.0
                          |          __libc_start_main
                          |          0x0
                          |
                           --5.99%-- do_my_sprintf
                                     main
                                     generic_start_main.isra.0
                                     __libc_start_main
                                     0x0

Callgraph after the patch:

    14.67%          2234  sprintft  libc-2.18.so       [.] __random
            |
            --- __random
               |
               |--95.93%-- rand
               |          do_my_sprintf
               |          main
               |          generic_start_main.isra.0
               |          __libc_start_main
               |          0x0
               |
                --4.07%-- do_my_sprintf
                          main
                          generic_start_main.isra.0
                          __libc_start_main
                          0x0

TODO:	For split-debug info objects like glibc, we can only determine
	the call-frame-address only when both .eh_frame and .debug_info
	sections are available. We should be able to determin the CFA
	even without the .eh_frame section.

Fix suggested by Anton Blanchard.

Thanks to valuable input on DWARF debug information from Ulrich Weigand.
Reported-by: NMaynard Johnson <maynard@us.ibm.com>
Tested-by: NMaynard Johnson <maynard@us.ibm.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20140625154903.GA29607@us.ibm.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>
      a60335ba
  21. 09 6月, 2014 1 次提交
  23. 04 6月, 2014 2 次提交
  25. 16 5月, 2014 1 次提交
  27. 12 5月, 2014 1 次提交
  29. 30 4月, 2014 2 次提交
  31. 29 4月, 2014 1 次提交
  33. 23 4月, 2014 1 次提交
  35. 14 4月, 2014 2 次提交
  37. 08 3月, 2014 1 次提交
  39. 28 2月, 2014 1 次提交
  41. 24 2月, 2014 6 次提交
    • J
      perf tools: Setup default dwarf post unwinder · 0a4f2b6a
      由 Jiri Olsa 提交于 
      Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects
default DWARf post unwinder based on detected features (libdw and
libunwind support)

If both are detected the libunwind is selected as default.  Simple
'make' will try to add:

  - libunwind unwinder if present
  - libdw unwinder if present
  - disable dwarf unwind if non of libunwind and libdw
    libraries are present

If one of the DWARF unwind libraries is detected, message is displayed
which one (libunwind/libdw) is compiled in.

Examples:
  - compile in libdw unwinder if present:

    $ make NO_LIBUNWIND=1

  - compile in libdw (with libdw installation directory) unwinder if present:

    $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1
      BUILD:   Doing 'make -j4' parallel build

    Auto-detecting system features:
    ...                         dwarf: [ on  ]
    ...                         glibc: [ on  ]
    ...                          gtk2: [ on  ]
    ...                      libaudit: [ on  ]
    ...                        libbfd: [ on  ]
    ...                        libelf: [ on  ]
    ...                       libnuma: [ on  ]
    ...                       libperl: [ on  ]
    ...                     libpython: [ on  ]
    ...                      libslang: [ on  ]
    ...                     libunwind: [ on  ]
    ...            libdw-dwarf-unwind: [ on  ]
    ...     DWARF post unwind library: libdw

  - disable post dwarf unwind completely:

    $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1
      BUILD:   Doing 'make -j4' parallel build

    Auto-detecting system features:
    ...                         dwarf: [ on  ]
    ...                         glibc: [ on  ]
    ...                          gtk2: [ on  ]
    ...                      libaudit: [ on  ]
    ...                        libbfd: [ on  ]
    ...                        libelf: [ on  ]
    ...                       libnuma: [ on  ]
    ...                       libperl: [ on  ]
    ...                     libpython: [ on  ]
    ...                      libslang: [ on  ]
    ...                     libunwind: [ on  ]
    ...            libdw-dwarf-unwind: [ on  ]
    ...     DWARF post unwind library: libunwind
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com
[ Add suggestion about setting LIBDW_DIR when not finding libdw ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0a4f2b6a
    • J
      perf tools: Add libdw DWARF post unwind support · 5ea84154
      由 Jiri Olsa 提交于 
      Adding libdw DWARF post unwind support, which is part of
elfutils-devel/libdw-dev package from version 0.158.

The new code is contained in unwin-libdw.c object, and implements
unwind__get_entries unwind interface function.

New Makefile variable NO_LIBDW_DWARF_UNWIND was added to control its
compilation, and is marked as disabled now.  It's factored with the rest
of the Makefile unwind build code in the next patch.

Arch specific code was added for x86.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-5-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      5ea84154
    • J
      perf tools: Add feature check for libdw dwarf unwind · 45757895
      由 Jiri Olsa 提交于 
      Adding feature check test code for libdw dwarf unwind.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-4-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      45757895
    • A
      perf tools: Warn the user about how to enable libunwind support · 7a0447d6
      由 Arnaldo Carvalho de Melo 提交于 
      When one has libunwind installed somewhere the perf tools build process
doesn't expects it to be, this happens:

  [acme@ssdandy linux]$ make O=/tmp/build/perf -C tools/perf/ install-bin
  make: Entering directory `/home/acme/git/linux/tools/perf'
    BUILD:   Doing 'make -j8' parallel build
  config/Makefile:312: No libunwind found, disabling post unwind support.  Please install libunwind-dev[el] >= 1.1

  Auto-detecting system features:
  <SNIP>
  ...                     libunwind: [ OFF ]

Change the message so that it tells how to use a non-standard libunwind
install directory:

  config/Makefile:312: No libunwind found, disabling post unwind support.  Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR

  [acme@ssdandy linux]$ make LIBUNWIND_DIR=/opt/libunwind-git/ O=/tmp/build/perf -C tools/perf/ install-bin
  make: Entering directory `/home/acme/git/linux/tools/perf'
    BUILD:   Doing 'make -j8' parallel build

  Auto-detecting system features:
  <SNIP>
  ...                     libunwind: [ on  ]
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-huoxnou7sw85lm58k3pi1xhw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      7a0447d6
    • J
      perf tools: Add variable display for VF make output · 8d79076a
      由 Jiri Olsa 提交于 
      Adding dump of interesting build directories to the make VF=1 output.

  $ make VF=1
    BUILD:   Doing 'make -j4' parallel build

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                      libaudit: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                      libslang: [ on  ]
  ...                     libunwind: [ on  ]
  ...                     backtrace: [ on  ]
  ...                fortify-source: [ on  ]
  ...                  gtk2-infobar: [ on  ]
  ...             libelf-getphdrnum: [ on  ]
  ...                   libelf-mmap: [ on  ]
  ...             libpython-version: [ on  ]
  ...                       on-exit: [ on  ]
  ...            stackprotector-all: [ on  ]
  ...                       timerfd: [ on  ]
  ...         libunwind-debug-frame: [ OFF ]
  ...                        bionic: [ OFF ]

  ...                        prefix: /home/jolsa
  ...                        bindir: /home/jolsa/bin
  ...                        libdir: /home/jolsa/lib64
  ...                    sysconfdir: /home/jolsa/etc

Adding functions to print variable/text in features display -
feature_print_var/feature_print_text (feature_print_text is used in next
patches).
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-3-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      8d79076a
    • J
      perf tools: Factor features display code · 0695e57b
      由 Jiri Olsa 提交于 
      Currently the we display all detected features/libraries by following
rules:

 - if one of the features is missing
 - if it's build from clean tree

This patch changes changes this behavior in several ways.

- We no longer display all detected features, only detected libraries
  are displayed by default:

  $ make
    BUILD:   Doing 'make -j4' parallel build

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                      libaudit: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                      libslang: [ on  ]
  ...                     libunwind: [ on  ]

  The assumption is, that above libraries are the most interesting part
of the detection, while we don't care much about detection of on-exit
support.

- If all above libraries are detected, the default is not shown on
  subsequent builds.

- If one of the above libraries is missing, the detection output is
  forced.

- The features status is stored in PERF-FEATURES file and the detection
  output is forced in case the there's difference between the file
  contents and currently detected features.

- If you want to see all detected features, you can use VF=1 make
  variable, that forces the detected features output.

  $ make VF=1
    BUILD:   Doing 'make -j4' parallel build

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                      libaudit: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                      libslang: [ on  ]
  ...                     libunwind: [ on  ]
  ...                     backtrace: [ on  ]
  ...                fortify-source: [ on  ]
  ...                  gtk2-infobar: [ on  ]
  ...             libelf-getphdrnum: [ on  ]
  ...                   libelf-mmap: [ on  ]
  ...             libpython-version: [ on  ]
  ...                       on-exit: [ on  ]
  ...            stackprotector-all: [ on  ]
  ...                       timerfd: [ on  ]
  ...         libunwind-debug-frame: [ OFF ]
  ...                        bionic: [ OFF ]
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0695e57b
  43. 18 2月, 2014 1 次提交
  45. 24 1月, 2014 1 次提交
  47. 16 1月, 2014 1 次提交
    • M
      perf: tools: Fix cross building · a8a5cd8b
      由 Mark Rutland 提交于 
      Currently the feature-checks Makefile does not inherit $(CC), and calls
cc rather than $(CROSS_COMPILE)gcc. Thus the feature checks invoke the
native toolchain rather than the cross toolchain, and can identify
features as available when they are not. This can break the build.

Additionally the native pkg-config is always called as opposed to
$(CROSS_COMPILE)pkg-config, so the wrong flags and paths may be passed
to the cross compiler.

This patch passes CROSS_COMPILE down to the feature-checks Makefile, and
forces its use. Additionally pkg-config is replaced with
$(CROSS_COMPILE)pkg-config via a new $(PKG_CONFIG) variable. This patch
has been build tested on x86_64 and arm.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1389782648-4417-4-git-send-email-mark.rutland@arm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a8a5cd8b
  49. 14 1月, 2014 1 次提交
  51. 13 1月, 2014 3 次提交