Now that all actual first chunk allocation and copying happen in the
first chunk allocators and helpers, there's no reason for
pcpu_setup_first_chunk() to try to determine @dyn_size automatically.
The only left user is page first chunk allocator.  Make it determine
dyn_size like other allocators and make @dyn_size mandatory for
pcpu_setup_first_chunk().
Signed-off-by: NTejun Heo <tj@kernel.org>

First chunk allocators assume percpu areas have been linked using one
of PERCPU_*() macros and depend on __per_cpu_load symbol defined by
those macros, so there isn't much point in passing in static area size
explicitly when it can be easily calculated from __per_cpu_start and
__per_cpu_end.  Drop @static_size from all percpu first chunk
allocators and helpers.
Signed-off-by: NTejun Heo <tj@kernel.org>

Now that all first chunk allocators are in mm/percpu.c, it makes sense
to make generalize percpu_alloc kernel parameter.  Define PCPU_FC_*
and set pcpu_chosen_fc using early_param() in mm/percpu.c.  Arch code
can use the set value to determine which first chunk allocator to use.
Signed-off-by: NTejun Heo <tj@kernel.org>

There's no need to build unused first chunk allocators in.  Define
CONFIG_NEED_PER_CPU_*_FIRST_CHUNK and let archs enable them
selectively.
Signed-off-by: NTejun Heo <tj@kernel.org>

Page size isn't always 4k depending on arch and configuration.  Rename
4k first chunk allocator to page.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: David Howells <dhowells@redhat.com>

Improve percpu boot messages such that they're uniform and contain
more information.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>

pcpu_reclaim() calls pcpu_depopulate_chunk() which makes use of pages
array and bitmap returned by pcpu_get_pages_and_bitmap() and thus
should be called under pcpu_alloc_mutex.  pcpu_reclaim() released the
mutex before calling depopulate leading to double free and other
strange problems caused by the unexpected concurrent usages of pages
array and bitmap.  Fix it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>

get_vm_area() only accepts VM_* flags, not GFP_*.

And according to the doc of get_vm_area(), here should be
VM_ALLOC.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>

percpu code has been assuming num_possible_cpus() == nr_cpu_ids which
is incorrect if cpu_possible_map contains holes.  This causes percpu
code to access beyond allocated memories and vmalloc areas.  On a
sparc64 machine with cpus 0 and 2 (u60), this triggers the following
warning or fails boot.

 WARNING: at /devel/tj/os/work/mm/vmalloc.c:106 vmap_page_range_noflush+0x1f0/0x240()
 Modules linked in:
 Call Trace:
  [00000000004b17d0] vmap_page_range_noflush+0x1f0/0x240
  [00000000004b1840] map_vm_area+0x20/0x60
  [00000000004b1950] __vmalloc_area_node+0xd0/0x160
  [0000000000593434] deflate_init+0x14/0xe0
  [0000000000583b94] __crypto_alloc_tfm+0xd4/0x1e0
  [00000000005844f0] crypto_alloc_base+0x50/0xa0
  [000000000058b898] alg_test_comp+0x18/0x80
  [000000000058dad4] alg_test+0x54/0x180
  [000000000058af00] cryptomgr_test+0x40/0x60
  [0000000000473098] kthread+0x58/0x80
  [000000000042b590] kernel_thread+0x30/0x60
  [0000000000472fd0] kthreadd+0xf0/0x160
 ---[ end trace 429b268a213317ba ]---

This patch fixes generic percpu functions and sparc64
setup_per_cpu_areas() so that they handle sparse cpu_possible_map
properly.

Please note that on x86, cpu_possible_map() doesn't contain holes and
thus num_possible_cpus() == nr_cpu_ids and this patch doesn't cause
any behavior difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>

Large page first chunk allocator is primarily used for NUMA machines;
however, its NUMA handling is extremely simplistic.  Regardless of
their proximity, each cpu is put into separate large page just to
return most of the allocated space back wasting large amount of
vmalloc space and increasing cache footprint.

This patch teachs NUMA details to large page allocator.  Given
processor proximity information, pcpu_lpage_build_unit_map() will find
fitting cpu -> unit mapping in which cpus in LOCAL_DISTANCE share the
same large page and not too much virtual address space is wasted.

This greatly reduces the unit and thus chunk size and wastes much less
address space for the first chunk.  For example, on 4/4 NUMA machine,
the original code occupied 16MB of virtual space for the first chunk
while the new code only uses 4MB - one 2MB page for each node.

[ Impact: much better space efficiency on NUMA machines ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Miller <davem@davemloft.net>

Currently cpu and unit are always identity mapped.  To allow more
efficient large page support on NUMA and lazy allocation for possible
but offline cpus, cpu -> unit mapping needs to be non-linear and/or
sparse.  This can be easily implemented by adding a cpu -> unit
mapping array and using it whenever looking up the matching unit for a
cpu.

The only unusal conversion is in pcpu_chunk_addr_search().  The passed
in address is unit0 based and unit0 might not be in use so it needs to
be converted to address of an in-use unit.  This is easily done by
adding the unit offset for the current processor.

[ Impact: allows non-linear/sparse cpu -> unit mapping, no visible change yet ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>

percpu core doesn't need to tack all the allocated pages.  It needs to
know whether certain pages are populated and a way to reverse map
address to page when freeing.  This patch drops pcpu_chunk->page[] and
use populated bitmap and vmalloc_to_page() lookup instead.  Using
vmalloc_to_page() exclusively is also possible but complicates first
chunk handling, inflates cache footprint and prevents non-standard
memory allocation for percpu memory.

pcpu_chunk->page[] was used to track each page's allocation and
allowed asymmetric population which happens during failure path;
however, with single bitmap for all units, this is no longer possible.
Bite the bullet and rewrite (de)populate functions so that things are
done in clearly separated steps such that asymmetric population
doesn't happen.  This makes the (de)population process much more
modular and will also ease implementing non-standard memory usage in
the future (e.g. large pages).

This makes @get_page_fn parameter to pcpu_setup_first_chunk()
unnecessary.  The parameter is dropped and all first chunk helpers are
updated accordingly.  Please note that despite the volume most changes
to first chunk helpers are symbol renames for variables which don't
need to be referenced outside of the helper anymore.

This change reduces memory usage and cache footprint of pcpu_chunk.
Now only #unit_pages bits are necessary per chunk.

[ Impact: reduced memory usage and cache footprint for bookkeeping ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>

(de)populate functions are about to be reimplemented to drop
pcpu_chunk->page array.  Move a few functions so that the rewrite
patch doesn't have code movement making it more difficult to read.

[ Impact: code movement ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>

Now that all first chunk allocator helpers allocate and map the first
chunk themselves, there's no need to have optional default alloc/map
in pcpu_setup_first_chunk().  Drop @populate_pte_fn and only leave
@dyn_size optional and make all other params mandatory.

This makes it much easier to follow what pcpu_setup_first_chunk() is
doing and what actual differences tweaking each parameter results in.

[ Impact: drop unused code path ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>

Generalize and move x86 setup_pcpu_lpage() into
pcpu_lpage_first_chunk().  setup_pcpu_lpage() now is a simple wrapper
around the generalized version.  Other than taking size parameters and
using arch supplied callbacks to allocate/free/map memory,
pcpu_lpage_first_chunk() is identical to the original implementation.

This simplifies arch code and will help converting more archs to
dynamic percpu allocator.

While at it, factor out pcpu_calc_fc_sizes() which is common to
pcpu_embed_first_chunk() and pcpu_lpage_first_chunk().

[ Impact: code reorganization and generalization ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>

At first, percpu first chunk was always setup page-by-page by the
generic code.  To add other allocators, different parts of the generic
initialization was made optional.  Now we have three allocators -
embed, remap and 4k.  embed and remap fully handle allocation and
mapping of the first chunk while 4k still depends on generic code for
those.  This makes the generic alloc/map paths specifci to 4k and
makes the code unnecessary complicated with optional generic
behaviors.

This patch makes the 4k allocator to allocate and map memory directly
instead of depending on the generic code.  The only outside visible
change is that now dynamic area in the first chunk is allocated
up-front instead of on-demand.  This doesn't make any meaningful
difference as the area is minimal (usually less than a page, just
enough to fill the alignment) on 4k allocator.  Plus, dynamic area in
the first chunk usually gets fully used anyway.

This will allow simplification of pcpu_setpu_first_chunk() and removal
of chunk->page array.

[ Impact: no outside visible change other than up-front allocation of dyn area ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>

Generalize and move x86 setup_pcpu_4k() into pcpu_4k_first_chunk().
setup_pcpu_4k() now is a simple wrapper around the generalized
version.  Other than taking size parameters and using arch supplied
callbacks to allocate/free memory, pcpu_4k_first_chunk() is identical
to the original implementation.

This simplifies arch code and will help converting more archs to
dynamic percpu allocator.

While at it, s/pcpu_populate_pte_fn_t/pcpu_fc_populate_pte_fn_t/ for
consistency.

[ Impact: code reorganization and generalization ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>

The only extra feature @unit_size provides is making dead space at the
end of the first chunk which doesn't have any valid usecase.  Drop the
parameter.  This will increase consistency with generalized 4k
allocator.

James Bottomley spotted missing conversion for the default
setup_per_cpu_areas() which caused build breakage on all arcsh which
use it.

[ Impact: drop unused code path ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Ingo Molnar <mingo@elte.hu>

The @addr passed into pcpu_chunk_addr_search() is unit0 based address
and thus should be matched inside unit0 area.  Currently, when it uses
chunk size when determining whether the address falls in the first
chunk.  Addresses in unitN where N>0 shouldn't be passed in anyway, so
this doesn't cause any malfunction but fix it for consistency.

[ Impact: mostly cleanup ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>

This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use
dynamic percpu allocator.  The first chunk is allocated using
embedding helper and 8k is reserved for modules.  This ensures that
the new allocator behaves almost identically to the original allocator
as long as static percpu variables are concerned, so it shouldn't
introduce much breakage.

s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing
range limit the addressing model imposes.  Unfortunately, this breaks
if the address is specified using a variable, so for now, the two
archs aren't converted.

The following architectures are affected by this change.

* sh
* arm
* cris
* mips
* sparc(32)
* blackfin
* avr32
* parisc (broken, under investigation)
* m32r
* powerpc(32)

As this change makes the dynamic allocator the default one,
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert -
CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted
archs.  These archs implement their own setup_per_cpu_areas() and the
conversion is not trivial.

* powerpc(64)
* sparc(64)
* ia64
* alpha
* s390

Boot and batch alloc/free tests on x86_32 with debug code (x86_32
doesn't use default first chunk initialization).  Compile tested on
sparc(32), powerpc(32), arm and alpha.

Kyle McMartin reported that this change breaks parisc.  The problem is
still under investigation and he is okay with pushing this patch
forward and fixing parisc later.

[ Impact: use dynamic allocator for most archs w/o custom percpu setup ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>

According to Andi, it isn't clear whether lpage allocator is worth the
trouble as there are many processors where PMD TLB is far scarcer than
PTE TLB.  The advantage or disadvantage probably depends on the actual
size of percpu area and specific processor.  As performance
degradation due to TLB pressure tends to be highly workload specific
and subtle, it is difficult to decide which way to go without more
data.

This patch implements percpu_alloc kernel parameter to allow selecting
which first chunk allocator to use to ease debugging and testing.

While at it, make sure all the failure paths report why something
failed to help determining why certain allocator isn't working.  Also,
kill the "Great future plan" comment which had already been realized
quite some time ago.

[ Impact: allow explicit percpu first chunk allocator selection ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NJan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>

In pcpu_unmap(), flushing virtual cache on vunmap can't be delayed as
the page is going to be returned to the page allocator.  Only TLB
flushing can be put off such that vmalloc code can handle it lazily.
Fix it.

[ Impact: fix subtle virtual cache flush bug ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>

Impact: use page->index for addr to chunk mapping instead of dedicated rbtree

The rbtree is used to determine the chunk from the virtual address.
However, we can already determine the page struct from a virtual
address and there are several unused fields in page struct used by
vmalloc.  Use the index field to store a pointer to the chunk. Then
there is no need anymore for an rbtree.

tj: * s/(set|get)_chunk/pcpu_\1_page_chunk/

    * Drop inline from the above two functions and moved them upwards
      so that they are with other simple helpers.

    * Initial pages might not (actually most of the time don't) live
      in the vmalloc area.  With the previous patch to manually
      reverse-map both first chunks, this is no longer an issue.
      Removed pcpu_set_chunk() call on initial pages.
Signed-off-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: rusty@rustcorp.com.au
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: rmk@arm.linux.org.uk
Cc: starvik@axis.com
Cc: ralf@linux-mips.org
Cc: davem@davemloft.net
Cc: cooloney@kernel.org
Cc: kyle@mcmartin.ca
Cc: matthew@wil.cx
Cc: grundler@parisc-linux.org
Cc: takata@linux-m32r.org
Cc: benh@kernel.crashing.org
Cc: rth@twiddle.net
Cc: ink@jurassic.park.msu.ru
Cc: heiko.carstens@de.ibm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
LKML-Reference: <49D43D58.4050102@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: both first chunks don't use rbtree, no functional change

There can be two first chunks - reserved and dynamic with the former
one being optional.  Dynamic first chunk was linked on reverse-mapping
rbtree while the reserved one was mapped manually using the start
address and reserved offset limit.

This patch makes both first chunks to be looked up manually without
using the rbtree.  This is to help getting rid of the rbtree.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: rusty@rustcorp.com.au
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: rmk@arm.linux.org.uk
Cc: starvik@axis.com
Cc: ralf@linux-mips.org
Cc: davem@davemloft.net
Cc: cooloney@kernel.org
Cc: kyle@mcmartin.ca
Cc: matthew@wil.cx
Cc: grundler@parisc-linux.org
Cc: takata@linux-m32r.org
Cc: benh@kernel.crashing.org
Cc: rth@twiddle.net
Cc: ink@jurassic.park.msu.ru
Cc: heiko.carstens@de.ibm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Christoph Lameter <cl@linux.com>
LKML-Reference: <49D43CEA.3040609@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: code reorganization

Separate out embedding first chunk setup helper from x86 embedding
first chunk allocator and put it in mm/percpu.c.  This will be used by
the default percpu first chunk allocator and possibly by other archs.
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: cleanup, more flexibility for first chunk init

Non-negative @dyn_size used to be allowed iff @unit_size wasn't auto.
This restriction stemmed from implementation detail and made things a
bit less intuitive.  This patch allows @dyn_size to be specified
regardless of @unit_size and swaps the positions of @dyn_size and
@unit_size so that the parameter order makes more sense (static,
reserved and dyn sizes followed by enclosing unit_size).

While at it, add @unit_size >= PCPU_MIN_UNIT_SIZE sanity check.
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: generic addr <-> pcpu ptr conversion macros

There's nothing arch specific about x86 __addr_to_pcpu_ptr() and
__pcpu_ptr_to_addr().  With proper __per_cpu_load and __per_cpu_start
defined, they'll do the right thing regardless of actual layout.

Move these macros from arch/x86/include/asm/percpu.h to mm/percpu.c
and allow archs to override it as necessary.
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: fix deadlock and allow atomic free

Percpu allocation always uses GFP_KERNEL and whole alloc/free paths
were protected by single mutex.  All percpu allocations have been from
GFP_KERNEL-safe context and the original allocator had this assumption
too.  However, by protecting both alloc and free paths with the same
mutex, the new allocator creates free -> alloc -> GFP_KERNEL
dependency which the original allocator didn't have.  This can lead to
deadlock if free is called from FS or IO paths.  Also, in general,
allocators are expected to allow free to be called from atomic
context.

This patch implements finer grained locking to break the deadlock and
allow atomic free.  For details, please read the "Synchronization
rules" comment.

While at it, also add CONTEXT: to function comments to describe which
context they expect to be called from and what they do to it.

This problem was reported by Thomas Gleixner and Peter Zijlstra.

  http://thread.gmane.org/gmane.linux.kernel/802384Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NThomas Gleixner <tglx@linutronix.de>
Reported-by: NPeter Zijlstra <peterz@infradead.org>

Impact: code reorganization for later changes

Do fully free chunk reclamation using a work.  This change is to
prepare for locking changes.
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: code reorganization for later changes

Separate out chunk area map extension into a separate function -
pcpu_extend_area_map() - and call it directly from pcpu_alloc() such
that pcpu_alloc_area() is guaranteed to have enough area map slots on
invocation.

With this change, pcpu_alloc_area() does only area allocation and the
only failure mode is when the chunk doens't have enough room, so
there's no need to distinguish it from memory allocation failures.
Make it return -1 on such cases instead of hacky -ENOSPC.
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: code reorganization for later changes

With static map handling moved to pcpu_split_block(), pcpu_realloc()
only clutters the code and it's also unsuitable for scheduled locking
changes.  Implement and use pcpu_mem_alloc/free() instead.
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: add reserved allocation functionality and use it for module
	percpu variables

This patch implements reserved allocation from the first chunk.  When
setting up the first chunk, arch can ask to set aside certain number
of bytes right after the core static area which is available only
through a separate reserved allocator.  This will be used primarily
for module static percpu variables on architectures with limited
relocation range to ensure that the module perpcu symbols are inside
the relocatable range.

If reserved area is requested, the first chunk becomes reserved and
isn't available for regular allocation.  If the first chunk also
includes piggy-back dynamic allocation area, a separate chunk mapping
the same region is created to serve dynamic allocation.  The first one
is called static first chunk and the second dynamic first chunk.
Although they share the page map, their different area map
initializations guarantee they serve disjoint areas according to their
purposes.

If arch doesn't setup reserved area, reserved allocation is handled
like any other allocation.
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: allow sharing page map, no functional difference yet

Make chunk->page access indirect by adding a pointer and renaming the
actual array to page_ar.  This will be used by future changes.
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: argument semantic cleanup

In pcpu_setup_first_chunk(), zero @unit_size and @dyn_size meant
auto-sizing.  It's okay for @unit_size as 0 doesn't make sense but 0
dynamic reserve size is valid.  Alos, if arch @dyn_size is calculated
from other parameters, it might end up passing in 0 @dyn_size and
malfunction when the size is automatically adjusted.

This patch makes both @unit_size and @dyn_size ssize_t and use -1 for
auto sizing.
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: no functional change

When the first chunk is created, its initial area map is not allocated
because kmalloc isn't online yet.  The map is allocated and
initialized on the first allocation request on the chunk.  This works
fine but the scattering of initialization logic between the init
function and allocation path is a bit confusing.

This patch makes the first chunk initialize and use minimal statically
allocated map from pcpu_setpu_first_chunk().  The map resizing path
still needs to handle this specially but it's more straight-forward
and gives more latitude to the init path.  This will ease future
changes.
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: cosmetic, preparation for future changes

Make the following renames in pcpur_setup_first_chunk() in preparation
for future changes.

* s/free_size/dyn_size/
* s/static_vm/first_vm/
* s/static_chunk/schunk/
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: remove compile warning

Mark local variable map_end in pcpu_populate_chunk() with
uninitialized_var().  The variable is always used in tandem with
map_start and guaranteed to be initialized before use but gcc doesn't
understand that.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NIngo Molnar <mingo@elte.hu>

Most global variables in percpu allocator are initialized during boot
and read only from that point on.  Add __read_mostly as per Rusty's
suggestion.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>

Impact: more latitude for first percpu chunk allocation

The first percpu chunk serves the kernel static percpu area and may or
may not contain extra room for further dynamic allocation.
Initialization of the first chunk needs to be done before normal
memory allocation service is up, so it has its own init path -
pcpu_setup_static().

It seems archs need more latitude while initializing the first chunk
for example to take advantage of large page mapping.  This patch makes
the following changes to allow this.

* Define PERCPU_DYNAMIC_RESERVE to give arch hint about how much space
  to reserve in the first chunk for further dynamic allocation.

* Rename pcpu_setup_static() to pcpu_setup_first_chunk().

* Make pcpu_setup_first_chunk() much more flexible by fetching page
  pointer by callback and adding optional @unit_size, @free_size and
  @base_addr arguments which allow archs to selectively part of chunk
  initialization to their likings.
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: allow unit_size to be arbitrary multiple of PAGE_SIZE

In dynamic percpu allocator, there is no reason the unit size should
be power of two.  Remove the restriction.

As non-power-of-two unit size means that empty chunks fall into the
same slot index as lightly occupied chunks which is bad for reclaming.
Reserve an extra slot for empty chunks.
Signed-off-by: NTejun Heo <tj@kernel.org>