Avoid the swevent hash-table by using per-tracepoint
hlists.

Also, avoid conditionals on the fast path by ordering
with probe unregister so that we should never get on
the callback path without the data being there.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.473188012@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Improves performance.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1274259525.5605.10352.camel@twins>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Using the same scheme as for git's/perf's pager setup, i.e. if one
doesn't want to, on a newt enabled perf binary, to disable the TUI for
'perf report', its just a matter of doing:

  [root@doppio linux-2.6-tip]# printf "[tui]\n\nreport = off\n" >
  /root/.perfconfig
  [root@doppio linux-2.6-tip]# cat /root/.perfconfig
  [tui]

  report = off
  [root@doppio linux-2.6-tip]#

System wide settings are also possible, by editing /etc/perfconfig, etc,
i.e. the git machinery for config files applies to perf as well, so when
in doubt where to put your settings, consult the git documentation, if
it fails, please let us know.
Suggested-by: NIngo Molnar <mingo@elte.hu>
Discussed-with: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Perf record repeatedly calls gettimeofday() which adds noise to the performance
measurements.  Since gettimeofday() is only used for the error printf, delete
it.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100518225240.GC25589@sgi.com>
Signed-off-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core

A writer that gets a reference to the buffer handle disables
preemption. When we put that reference, we check if we are
the outer most writer and if not, we simply return and defer
the head update to the outer most writer. The problem here
is that preemption is only reenabled by the outer most, that
produces preemption count imbalance for every nested writer
that exit.

So just don't forget to always re-enable preemption when we
put the buffer reference, whoever we are.

Fixes lots of sleeping in atomic warnings, visible with lock
events recording.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Robert Richter <robert.richter@amd.com>

We were still using the pathname found on the MMAP event, that could not
be the one we used when recording, so use the build-id cache for that,
only falling back to use the pathname in the MMAP event if no build-ids
are available.

With this we now also are able to do secure, seamless offline annotation.

Example:

[root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10
     8.12%     Xorg  /usr/lib64/libpixman-1.so.0.14.0       0x0000000000026d02 B [.] pixman_rasterize_edges
     4.68%  firefox  /usr/lib64/xulrunner-1.9.1/libxul.so   0x00000000005dbdba B [.] 0x000000005dbdba
     3.70%  swapper  /lib/modules/2.6.34-rc6/build/vmlinux  0xffffffff81022cea ! [k] read_hpet
     2.96%     init  /lib/modules/2.6.34-rc6/build/vmlinux  0xffffffff81022cea ! [k] read_hpet
     2.73%  swapper  /lib/modules/2.6.34-rc6/build/vmlinux  0xffffffff8100a738 ! [k] mwait_idle_with_hints
[root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing
Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand
[root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0
bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0
[root@doppio linux-2.6-tip]#
Reported-by: NStephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Just like if one is using the stdio based pager, or more/less, for that
matter.
Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core

Accessing trace values of an 8 size may end up in a segfault
on archs that can't deal with misaligned access, which is the
case for sparc 64. This is because PERF_SAMPLE_RAW are aligned
to 4 and not to 8.

Fix this on the macros that get the values of 8 size.

This fixes segfaults on perf tools in sparc 64.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: David Miller <davem@davemloft.net>

The software events hlist doesn't fully comply with the new
rcu checks api.

We need to consider three different sides that access the hlist:

- the hlist allocation/release side. This side happens when an
  events is created or released, accesses to the hlist are
  serialized under the cpuctx mutex.

- the events insertion/removal in the hlist. This side is always
  serialized against the above one. The hlist is always present
  during such operations. This side happens when a software event
  is scheduled in/out. The serialization that ensures the software
  event is really attached to the context is made under the
  ctx->lock.

- events triggering. This is the read side, it can happen
  concurrently with any update side.

This patch deals with them one by one and anticipates with the
separate rcu mem space patches in preparation.

This patch fixes various annoying rcu warnings.
Reported-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>

This is a small fix for a problem affecting live-mode, introduced
recently:

root@tropicana:~# perf trace rwtop
perf trace started with Perl
script /root/libexec/perf-core/scripts/perl/rwtop.pl

  Fatal: did not read header event

commit d00a47cc added a skip()
function to skip over e.g. header_page, but this doesn't work for
live mode.  This patch re-implements skip() to use read() instead of
lseek() to fix that.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1273032130.6383.28.camel@tropicana>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The changes made to support host and guest machines in a session, that
started when the 'perf kvm' tool was introduced ended up introducing a
bug where the host_machine was not having its DSOs traversed for
build-id processing.

Fix it by moving some methods to the right classes and considering the
host_machine when processing build-ids.
Reported-by: NTom Zanussi <tzanussi@gmail.com>
Reported-by: NStephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In __dsos__read_build_ids if the dso already had its build-id read,
don't try again.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Should be there for the sake of RAW events.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
CC: Lin Ming <ming.m.lin@intel.com>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
CC: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100518212439.354345151@openvz.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This snippet somehow escaped the commit:

 | commit 137351e0
 | Author: Cyrill Gorcunov <gorcunov@openvz.org>
 | Date:   Sat May 8 15:25:52 2010 +0400
 |
 |    x86, perf: P4 PMU -- protect sensible procedures from preemption

so bring it eventually back. It helps to catch
preemption issue (if there will be, rule of thumb --
don't use raw_ if you can).
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100518212439.167259349@openvz.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

To prevent from clashes in future code modifications
do a real check for ESCR address being in hash. At
moment the callers are known to pass sane values but
better to be on a safe side.

And comment fix.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
CC: Lin Ming <ming.m.lin@intel.com>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
CC: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100518212439.004503600@openvz.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

All the functions that call this can handle the equivalent, non
panic'ing wrapped routines.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Functions that were calling xzalloc also returned -1 when, for other
reasons, it could fail, and the calleds are coping with failures, so
stop using die() and xzalloc().

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

That could leave filedescriptors open and leak memory. Also stop using
xmalloc, use malloc and handle results just like other error cases in
the same routine that used it.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Without the bloated cplus_demangle from binutils, i.e building with:

$ make NO_DEMANGLE=1 O=~acme/git/build/perf -j3 -C tools/perf/ install

Before:

   text	   data	    bss	    dec	    hex	filename
 471851	  29280	4025056	4526187	 45106b	/home/acme/bin/perf

After:

[acme@doppio linux-2.6-tip]$ size ~/bin/perf
   text	   data	    bss	    dec	    hex	filename
 446886	  29232	4008576	4484694	 446e56	/home/acme/bin/perf

So its a 5.3% size reduction in code, but the interesting part is in the git
diff --stat output:

 19 files changed, 20 insertions(+), 1909 deletions(-)

If we ever need some of the things we got from git but weren't using, we just
have to go to the git repo and get fresh, uptodate source code bits.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It is hard to read very large numbers so provide an option to perf stat
to separate thousands using a separator. The patch leverages the locale
support of stdio. You need to set your LC_NUMERIC appropriately, for
instance LC_NUMERIC=en_US.UTF8. You need to pass -B to activate this
feature. This way existing scripts parsing the output do not need to be
changed. Here is an example.

$ perf stat noploop 2
noploop for 2 seconds

 Performance counter stats for 'noploop 2':

        1998.347031  task-clock-msecs         #      0.998 CPUs
                 61  context-switches         #      0.000 M/sec
                  0  CPU-migrations           #      0.000 M/sec
                118  page-faults              #      0.000 M/sec
      4,138,410,900  cycles                   #   2070.917 M/sec  (scaled from 70.01%)
      2,062,650,268  instructions             #      0.498 IPC    (scaled from 70.01%)
      2,057,653,466  branches                 #   1029.678 M/sec  (scaled from 70.01%)
             40,267  branch-misses            #      0.002 %      (scaled from 30.04%)
      2,055,961,348  cache-references         #   1028.831 M/sec  (scaled from 30.03%)
             53,725  cache-misses             #      0.027 M/sec  (scaled from 30.02%)

        2.001393933  seconds time elapsed

$ perf stat -B  noploop 2
noploop for 2 seconds

 Performance counter stats for 'noploop 2':

        1998.297883  task-clock-msecs         #      0.998 CPUs
                 59  context-switches         #      0.000 M/sec
                  0  CPU-migrations           #      0.000 M/sec
                119  page-faults              #      0.000 M/sec
      4,131,380,160  cycles                   #   2067.450 M/sec  (scaled from 70.01%)
      2,059,096,507  instructions             #      0.498 IPC    (scaled from 70.01%)
      2,054,681,303  branches                 #   1028.216 M/sec  (scaled from 70.01%)
             25,650  branch-misses            #      0.001 %      (scaled from 30.05%)
      2,056,283,014  cache-references         #   1029.017 M/sec  (scaled from 30.03%)
             47,097  cache-misses             #      0.024 M/sec  (scaled from 30.02%)

        2.001391016  seconds time elapsed

Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4bf28fe8.914ed80a.01ca.fffff5f5@mx.google.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Convert to the transactional PMU API and remove the duplication of
group_sched_in().

[cross build only]
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Acked-by: NDavid Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1272002193.5707.65.camel@minggr.sh.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV: uv_irq.c: Fix all sparse warnings
  x86, UV: Improve BAU performance and error recovery
  x86, UV: Delete unneeded boot messages
  x86, UV: Clean up UV headers for MMR definitions

Since the x86 XCHG ins implies LOCK, avoid the use by
using a sequence count instead.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since there is now only a single writer, we can use
local_t instead and avoid all these pesky LOCK insn.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since we can now assume there is only a single writer
to each buffer, we can remove per-cpu lock thingy and
use a simply nest-count to the same effect.

This removes the need to disable IRQs.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since we now have working per-task-per-cpu events for
a while, disallow mmap() on per-task inherited
events. Those things were a performance problem
anyway, and doing away with it allows us to optimize
the buffer somewhat by assuming there is only a
single writer.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Ensure cpu bound buffers live on the right NUMA node.
Suggested-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1274114880.5605.5236.camel@twins>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In case the sampling buffer has no "payload" pages,
nr_pages is 0. The problem is that the error path in
perf_output_begin() skips to a label which assumes
perf_output_lock() has been issued which is not the
case. That triggers a WARN_ON() in
perf_output_unlock().

This patch fixes the problem by skipping
perf_output_unlock() in case data->nr_pages is 0.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4bf13674.014fd80a.6c82.ffffb20c@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we've got but a single event per tracepoint
there is no reason to try and multiplex it so don't.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: NIngo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'x86-txt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, tboot: Add support for S3 memory integrity protection

* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pat: Update the page flags for memtype atomically instead of using memtype_lock
  x86, pat: In rbt_memtype_check_insert(), update new->type only if valid
  x86, pat: Migrate to rbtree only backend for pat memtype management
  x86, pat: Preparatory changes in pat.c for bigger rbtree change
  rbtree: Add support for augmented rbtrees

Merge branch 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mrst: add nop functions to x86_init mpparse functions
  x86, mrst, pci: return 0 for non-present pci bars
  x86: Avoid check hlt for newer cpus

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64: Combine SRAT regions when possible

Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/microcode: Use nonseekable_open()
  x86: Improve Intel microcode loader performance

Merge branch 'core-hweight-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-hweight-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hweight: Use a 32-bit popcnt for __arch_hweight32()
  arch, hweight: Fix compilation errors
  x86: Add optimized popcnt variants
  bitops: Optimize hweight() by making use of compile-time evaluation

* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, acpi/irq: Define gsi_end when X86_IO_APIC is undefined
  x86, irq: Kill io_apic_renumber_irq
  x86, acpi/irq: Handle isa irqs that are not identity mapped to gsi's.
  x86, ioapic: Simplify probe_nr_irqs_gsi.
  x86, ioapic: Optimize pin_2_irq
  x86, ioapic: Move nr_ioapic_registers calculation to mp_register_ioapic.
  x86, ioapic: In mpparse use mp_register_ioapic
  x86, ioapic: Teach mp_register_ioapic to compute a global gsi_end
  x86, ioapic: Fix the types of gsi values
  x86, ioapic: Fix io_apic_redir_entries to return the number of entries.
  x86, ioapic: Only export mp_find_ioapic and mp_find_ioapic_pin in io_apic.h
  x86, acpi/irq: Generalize mp_config_acpi_legacy_irqs
  x86, acpi/irq: Fix acpi_sci_ioapic_setup so it has both bus_irq and gsi
  x86, acpi/irq: pci device dev->irq is an isa irq not a gsi
  x86, acpi/irq: Teach acpi_get_override_irq to take a gsi not an isa_irq
  x86, acpi/irq: Introduce apci_isa_irq_to_gsi

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, fpu: Use static_cpu_has() to implement use_xsave()
  x86: Add new static_cpu_has() function using alternatives
  x86, fpu: Use the proper asm constraint in use_xsave()
  x86, fpu: Unbreak FPU emulation
  x86: Introduce 'struct fpu' and related API
  x86: Eliminate TS_XSAVE
  x86-32: Don't set ignore_fpu_irq in simd exception
  x86: Merge kernel_math_error() into math_error()
  x86: Merge simd_math_error() into math_error()
  x86-32: Rework cache flush denied handler

Fix trivial conflict in arch/x86/kernel/process.c