- 25 4月, 2019 8 次提交
-
-
由 Coly Li 提交于
In journal_reclaim() ja->cur_idx of each cache will be update to reclaim available journal buckets. Variable 'int n' is used to count how many cache is successfully reclaimed, then n is set to c->journal.key by SET_KEY_PTRS(). Later in journal_write_unlocked(), a for_each_cache() loop will write the jset data onto each cache. The problem is, if all jouranl buckets on each cache is full, the following code in journal_reclaim(), 529 for_each_cache(ca, c, iter) { 530 struct journal_device *ja = &ca->journal; 531 unsigned int next = (ja->cur_idx + 1) % ca->sb.njournal_buckets; 532 533 /* No space available on this device */ 534 if (next == ja->discard_idx) 535 continue; 536 537 ja->cur_idx = next; 538 k->ptr[n++] = MAKE_PTR(0, 539 bucket_to_sector(c, ca->sb.d[ja->cur_idx]), 540 ca->sb.nr_this_dev); 541 } 542 543 bkey_init(k); 544 SET_KEY_PTRS(k, n); If there is no available bucket to reclaim, the if() condition at line 534 will always true, and n remains 0. Then at line 544, SET_KEY_PTRS() will set KEY_PTRS field of c->journal.key to 0. Setting KEY_PTRS field of c->journal.key to 0 is wrong. Because in journal_write_unlocked() the journal data is written in following loop, 649 for (i = 0; i < KEY_PTRS(k); i++) { 650-671 submit journal data to cache device 672 } If KEY_PTRS field is set to 0 in jouranl_reclaim(), the journal data won't be written to cache device here. If system crahed or rebooted before bkeys of the lost journal entries written into btree nodes, data corruption will be reported during bcache reload after rebooting the system. Indeed there is only one cache in a cache set, there is no need to set KEY_PTRS field in journal_reclaim() at all. But in order to keep the for_each_cache() logic consistent for now, this patch fixes the above problem by not setting 0 KEY_PTRS of journal key, if there is no bucket available to reclaim. Signed-off-by: NColy Li <colyli@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Cc: stable@vger.kernel.org Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Coly Li 提交于
'int ret' is defined as a local variable inside macro read_bucket(). Since this macro is called multiple times, and following patches will use a 'int ret' variable in bch_journal_read(), this patch moves definition of 'int ret' from macro read_bucket() to range of function bch_journal_read(). Signed-off-by: NColy Li <colyli@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Liang Chen 提交于
There is a race between cache device register and cache set unregister. For an already registered cache device, register_bcache will call bch_is_open to iterate through all cachesets and check every cache there. The race occurs if cache_set_free executes at the same time and clears the caches right before ca is dereferenced in bch_is_open_cache. To close the race, let's make sure the clean up work is protected by the bch_register_lock as well. This issue can be reproduced as follows, while true; do echo /dev/XXX> /sys/fs/bcache/register ; done& while true; do echo 1> /sys/block/XXX/bcache/set/unregister ; done & and results in the following oops, [ +0.000053] BUG: unable to handle kernel NULL pointer dereference at 0000000000000998 [ +0.000457] #PF error: [normal kernel read fault] [ +0.000464] PGD 800000003ca9d067 P4D 800000003ca9d067 PUD 3ca9c067 PMD 0 [ +0.000388] Oops: 0000 [#1] SMP PTI [ +0.000269] CPU: 1 PID: 3266 Comm: bash Not tainted 5.0.0+ #6 [ +0.000346] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014 [ +0.000472] RIP: 0010:register_bcache+0x1829/0x1990 [bcache] [ +0.000344] Code: b0 48 83 e8 50 48 81 fa e0 e1 10 c0 0f 84 a9 00 00 00 48 89 c6 48 89 ca 0f b7 ba 54 04 00 00 4c 8b 82 60 0c 00 00 85 ff 74 2f <49> 3b a8 98 09 00 00 74 4e 44 8d 47 ff 31 ff 49 c1 e0 03 eb 0d [ +0.000839] RSP: 0018:ffff92ee804cbd88 EFLAGS: 00010202 [ +0.000328] RAX: ffffffffc010e190 RBX: ffff918b5c6b5000 RCX: ffff918b7d8e0000 [ +0.000399] RDX: ffff918b7d8e0000 RSI: ffffffffc010e190 RDI: 0000000000000001 [ +0.000398] RBP: ffff918b7d318340 R08: 0000000000000000 R09: ffffffffb9bd2d7a [ +0.000385] R10: ffff918b7eb253c0 R11: ffffb95980f51200 R12: ffffffffc010e1a0 [ +0.000411] R13: fffffffffffffff2 R14: 000000000000000b R15: ffff918b7e232620 [ +0.000384] FS: 00007f955bec2740(0000) GS:ffff918b7eb00000(0000) knlGS:0000000000000000 [ +0.000420] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000801] CR2: 0000000000000998 CR3: 000000003cad6000 CR4: 00000000001406e0 [ +0.000837] Call Trace: [ +0.000682] ? _cond_resched+0x10/0x20 [ +0.000691] ? __kmalloc+0x131/0x1b0 [ +0.000710] kernfs_fop_write+0xfa/0x170 [ +0.000733] __vfs_write+0x2e/0x190 [ +0.000688] ? inode_security+0x10/0x30 [ +0.000698] ? selinux_file_permission+0xd2/0x120 [ +0.000752] ? security_file_permission+0x2b/0x100 [ +0.000753] vfs_write+0xa8/0x1a0 [ +0.000676] ksys_write+0x4d/0xb0 [ +0.000699] do_syscall_64+0x3a/0xf0 [ +0.000692] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: NLiang Chen <liangchen.linux@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NColy Li <colyli@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 George Spelvin 提交于
There are a few nits in this function. They could in theory all be separate patches, but that's probably taking small commits too far. 1) I added a brief comment saying what it does. 2) I like to declare pointer parameters "const" where possible for documentation reasons. 3) It uses bitmap_weight(&rand, BITS_PER_LONG) to compute the Hamming weight of a 32-bit random number (giving a random integer with mean 16 and variance 8). Passing by reference in a 64-bit variable is silly; just use hweight32(). 4) Its helper function fract_exp_two is unnecessarily tangled. Gcc can optimize the multiply by (1 << x) to a shift, but it can be written in a much more straightforward way at the cost of one more bit of internal precision. Some analysis reveals that this bit is always available. This shrinks the object code for fract_exp_two(x, 6) from 23 bytes: 0000000000000000 <foo1>: 0: 89 f9 mov %edi,%ecx 2: c1 e9 06 shr $0x6,%ecx 5: b8 01 00 00 00 mov $0x1,%eax a: d3 e0 shl %cl,%eax c: 83 e7 3f and $0x3f,%edi f: d3 e7 shl %cl,%edi 11: c1 ef 06 shr $0x6,%edi 14: 01 f8 add %edi,%eax 16: c3 retq To 19: 0000000000000017 <foo2>: 17: 89 f8 mov %edi,%eax 19: 83 e0 3f and $0x3f,%eax 1c: 83 c0 40 add $0x40,%eax 1f: 89 f9 mov %edi,%ecx 21: c1 e9 06 shr $0x6,%ecx 24: d3 e0 shl %cl,%eax 26: c1 e8 06 shr $0x6,%eax 29: c3 retq (Verified with 0 <= frac_bits <= 8, 0 <= x < 16<<frac_bits; both versions produce the same output.) 5) And finally, the call to bch_get_congested() in check_should_bypass() is separated from the use of the value by multiple tests which could moot the need to compute it. Move the computation down to where it's needed. This also saves a local register to hold the computed value. Signed-off-by: NGeorge Spelvin <lkml@sdf.org> Signed-off-by: NColy Li <colyli@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Geliang Tang 提交于
This patch uses kmemdup_nul to create a NUL-terminated string from dc->sb.label. This is better than open coding it. With this, we can move env[2] initialization into env[] array to make code more elegant. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NColy Li <colyli@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Arnd Bergmann 提交于
clang has identified a code path in which it thinks a variable may be unused: drivers/md/bcache/alloc.c:333:4: error: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] fifo_pop(&ca->free_inc, bucket); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop' #define fifo_pop(fifo, i) fifo_pop_front(fifo, (i)) ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/md/bcache/util.h:189:6: note: expanded from macro 'fifo_pop_front' if (_r) { \ ^~ drivers/md/bcache/alloc.c:343:46: note: uninitialized use occurs here allocator_wait(ca, bch_allocator_push(ca, bucket)); ^~~~~~ drivers/md/bcache/alloc.c:287:7: note: expanded from macro 'allocator_wait' if (cond) \ ^~~~ drivers/md/bcache/alloc.c:333:4: note: remove the 'if' if its condition is always true fifo_pop(&ca->free_inc, bucket); ^ drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop' #define fifo_pop(fifo, i) fifo_pop_front(fifo, (i)) ^ drivers/md/bcache/util.h:189:2: note: expanded from macro 'fifo_pop_front' if (_r) { \ ^ drivers/md/bcache/alloc.c:331:15: note: initialize the variable 'bucket' to silence this warning long bucket; ^ This cannot happen in practice because we only enter the loop if there is at least one element in the list. Slightly rearranging the code makes this clearer to both the reader and the compiler, which avoids the warning. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NColy Li <colyli@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Guoju Fang 提交于
To get the amount of unused buckets in sysfs_priority_stats, the code count the buckets which GC_SECTORS_USED is zero. It's correct and should not be overwritten by the count of buckets which prio is zero. Signed-off-by: NGuoju Fang <fangguoju@gmail.com> Signed-off-by: NColy Li <colyli@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Guoju Fang 提交于
The bio from upper layer is considered completed when bio_complete() returns. In most scenarios bio_complete() is called in search_free(), but when read miss happens, the bio_compete() is called when backing device reading completed, while the struct search is still in use until cache inserting finished. If someone stops the bcache device just then, the device may be closed and released, but after cache inserting finished the struct search will access a freed struct cached_dev. This patch add the reference of bcache device before bio_complete() when read miss happens, and put it after the search is not used. Signed-off-by: NGuoju Fang <fangguoju@gmail.com> Signed-off-by: NColy Li <colyli@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 24 4月, 2019 1 次提交
-
-
由 Ming Lei 提交于
The refcount has been increased for pages retrieved from non-bvec iov iter via __bio_iov_iter_get_pages(), so don't need to do that again. Otherwise, IO pages are leaked easily. Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Fixes: 7321ecbf ("block: change how we get page references in bio_iov_iter_get_pages") Signed-off-by: NMing Lei <ming.lei@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 23 4月, 2019 2 次提交
-
-
由 Ming Lei 提交于
bio_add_page() and __bio_add_page() are capable of adding pages into bio, and now we have at least two such usages alreay: - __bio_iov_bvec_add_pages() - nvmet_bdev_execute_rw(). So update comments on these two helpers. The thing is a bit special for __bio_try_merge_page(), given the caller needs to know if the new added page is same with the last added page, then it isn't safe to pass multi-page in case that 'same_page' is true, so adds warning on potential misuse, and updates comment on __bio_try_merge_page(). Cc: linux-xfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Reviewed-by: NHannes Reinecke <hare@suse.com> Reviewed-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NMing Lei <ming.lei@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
https://github.com/liu-song-6/linux由 Jens Axboe 提交于
Pull MD fixes from Song. * 'md-next' of https://github.com/liu-song-6/linux: md/raid: raid5 preserve the writeback action after the parity check Revert "Don't jump to compute_result state from check_result state" md: return -ENODEV if rdev has no mddev assigned block: fix use-after-free on gendisk
-
- 22 4月, 2019 6 次提交
-
-
由 Weiping Zhang 提交于
If the low level driver has no timeout handler, the /sys/block/<disk>/queue/io_timeout will not be displayed. Reviewed-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NWeiping Zhang <zhangweiping@didiglobal.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Christoph Hellwig 提交于
While we generally allow scatterlists to have offsets larger than page size for an entry, and other subsystems like the crypto code make use of that, the block layer isn't quite ready for that. Flip the switch back to avoid them for now, and revisit that decision early in a merge window once the known offenders are fixed. Fixes: 8a96a0e4 ("block: rewrite blk_bvec_map_sg to avoid a nth_page call") Reviewed-by: NMing Lei <ming.lei@redhat.com> Tested-by: NGuenter Roeck <linux@roeck-us.net> Reported-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Hou Tao 提交于
__GFP_HIGHMEM is disabled if dax is enabled on brd, however dax support for brd has been removed since commit (7a862fbb "brd: remove dax support"), so restore __GFP_HIGHMEM in brd_insert_page(). Also remove the no longer applicable comments about DAX and highmem. Cc: stable@vger.kernel.org Fixes: 7a862fbb ("brd: remove dax support") Signed-off-by: NHou Tao <houtao1@huawei.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Yufen Yu 提交于
commit 2da78092 "block: Fix dev_t minor allocation lifetime" specifically moved blk_free_devt(dev->devt) call to part_release() to avoid reallocating device number before the device is fully shutdown. However, it can cause use-after-free on gendisk in get_gendisk(). We use md device as example to show the race scenes: Process1 Worker Process2 md_free blkdev_open del_gendisk add delete_partition_work_fn() to wq __blkdev_get get_gendisk put_disk disk_release kfree(disk) find part from ext_devt_idr get_disk_and_module(disk) cause use after free delete_partition_work_fn put_device(part) part_release remove part from ext_devt_idr Before <devt, hd_struct pointer> is removed from ext_devt_idr by delete_partition_work_fn(), we can find the devt and then access gendisk by hd_struct pointer. But, if we access the gendisk after it have been freed, it can cause in use-after-freeon gendisk in get_gendisk(). We fix this by adding a new helper blk_invalidate_devt() in delete_partition() and del_gendisk(). It replaces hd_struct pointer in idr with value 'NULL', and deletes the entry from idr in part_release() as we do now. Thanks to Jan Kara for providing the solution and more clear comments for the code. Fixes: 2da78092 ("block: Fix dev_t minor allocation lifetime") Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: NBart Van Assche <bvanassche@acm.org> Reviewed-by: NKeith Busch <keith.busch@intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Suggested-by: NJan Kara <jack@suse.cz> Signed-off-by: NYufen Yu <yuyufen@huawei.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
Pull in v5.1-rc6 to resolve two conflicts. One is in BFQ, in just a comment, and is trivial. The other one is a conflict due to a later fix in the bio multi-page work, and needs a bit more care. * tag 'v5.1-rc6': (770 commits) Linux 5.1-rc6 block: make sure that bvec length can't be overflow block: kill all_q_node in request_queue x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping mm/kmemleak.c: fix unused-function warning init: initialize jump labels before command line option parsing kernel/watchdog_hld.c: hard lockup message should end with a newline kcov: improve CONFIG_ARCH_HAS_KCOV help text mm: fix inactive list balancing between NUMA nodes and cgroups mm/hotplug: treat CMA pages as unmovable proc: fixup proc-pid-vm test proc: fix map_files test on F29 mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock mm: swapoff: shmem_unuse() stop eviction without igrab() mm: swapoff: take notice of completion sooner mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES mm: swapoff: shmem_find_swap_entries() filter out other types slab: store tagged freelist for off-slab slabmgmt ... Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Linus Torvalds 提交于
-
- 21 4月, 2019 10 次提交
-
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfix from Trond Myklebust: "Fix a regression in which an RPC call can be tagged with an error despite the transmission being successful" * tag 'nfs-for-5.1-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Ignore queue transmission errors on successful transmission
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "Three minor fixes: two obvious ones in drivers and a fix to the SG_IO path to correctly return status on error" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: aic7xxx: fix EISA support Revert "scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO" scsi: core: set result when the command cannot be dispatched
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "A set of small fixes that should go into this series. This contains: - Removal of unused queue member (Hou) - Overflow bvec fix (Ming) - Various little io_uring tweaks (me) - kthread parking - Only call cpu_possible() for verified CPU - Drop unused 'file' argument to io_file_put() - io_uring_enter vs io_uring_register deadlock fix - CQ overflow fix - BFQ internal depth update fix (me)" * tag 'for-linus-20190420' of git://git.kernel.dk/linux-block: block: make sure that bvec length can't be overflow block: kill all_q_node in request_queue io_uring: fix CQ overflow condition io_uring: fix possible deadlock between io_uring_{enter,register} io_uring: drop io_file_put() 'file' argument bfq: update internal depth state when queue depth changes io_uring: only test SQPOLL cpu after we've verified it io_uring: park SQPOLL thread if it's percpu
-
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux由 Linus Torvalds 提交于
Pill i3c fixes from Boris Brezillon: - fix the random PID check - fix the disable controller logic in the designware driver - fix I3C entry in MAINTAINERS * tag 'i3c/fixes-for-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: MAINTAINERS: Fix the I3C entry i3c: dw: Fix dw_i3c_master_disable controller by using correct mask i3c: Fix the verification of random PID
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Two core fixes for long-standing bugs for the races at concurrent device creation and deletion that were (unsurprisingly) spotted by syzkaller with usb-fuzzer. The rest are usual small HD-audio fixes" * tag 'sound-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - add two more pin configuration sets to quirk table ALSA: core: Fix card races between register and disconnect ALSA: info: Fix racy addition/deletion of nodes ALSA: hda: Initialize power_state field properly
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Ingo Molnar: "Misc clocksource driver fixes, and a sched-clock wrapping fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers/sched_clock: Prevent generic sched_clock wrap caused by tick_freeze() clocksource/drivers/timer-ti-dm: Remove omap_dm_timer_set_load_start clocksource/drivers/oxnas: Fix OX820 compatible clocksource/drivers/arm_arch_timer: Remove unneeded pr_fmt macro clocksource/drivers/npcm: select TIMER_OF
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Misc fixes: - various tooling fixes - kretprobe fixes - kprobes annotation fixes - kprobes error checking fix - fix the default events for AMD Family 17h CPUs - PEBS fix - AUX record fix - address filtering fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Avoid kretprobe recursion bug kprobes: Mark ftrace mcount handler functions nokprobe x86/kprobes: Verify stack frame on kretprobe perf/x86/amd: Add event map for AMD Family 17h perf bpf: Return NULL when RB tree lookup fails in perf_env__find_btf() perf tools: Fix map reference counting perf evlist: Fix side band thread draining perf tools: Check maps for bpf programs perf bpf: Return NULL when RB tree lookup fails in perf_env__find_bpf_prog_info() tools include uapi: Sync sound/asound.h copy perf top: Always sample time to satisfy needs of use of ordered queuing perf evsel: Use hweight64() instead of hweight_long(attr.sample_regs_user) tools lib traceevent: Fix missing equality check for strcmp perf stat: Disable DIR_FORMAT feature for 'perf stat record' perf scripts python: export-to-sqlite.py: Fix use of parent_id in calls_view perf header: Fix lock/unlock imbalances when processing BPF/BTF info perf/x86: Fix incorrect PEBS_REGS perf/ring_buffer: Fix AUX record suppression perf/core: Fix the address filtering fix kprobes: Fix error check when reusing optimized probes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Misc fixes all over the place: a console spam fix, section attributes fixes, a KASLR fix, a TLB stack-variable alignment fix, a reboot quirk, boot options related warnings fix, an LTO fix, a deadlock fix and an RDT fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority x86/cpu/bugs: Use __initconst for 'const' init data x86/mm/KASLR: Fix the size of the direct mapping section x86/Kconfig: Fix spelling mistake "effectivness" -> "effectiveness" x86/mm/tlb: Revert "x86/mm: Align TLB invalidation info" x86/reboot, efi: Use EFI reboot for Acer TravelMate X514-51T x86/mm: Prevent bogus warnings with "noexec=off" x86/build/lto: Fix truncated .bss with -fdata-sections x86/speculation: Prevent deadlock on ssb_state::lock x86/resctrl: Do not repeat rdtgroup mode initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "A deadline scheduler warning/race fix, and a cfs_period_us quota calculation workaround where the real fix looks too involved to merge immediately" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Correctly handle active 0-lag timers sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fixes from Ingo Molnar: "A lockdep warning fix and a script execution fix when atomics are generated" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomics: Don't assume that scripts are executable locking/lockdep: Make lockdep_unregister_key() honor 'debug_locks' again
-
- 20 4月, 2019 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fix from Tejun Heo: "A patch to fix a RCU imbalance error in the devices cgroup configuration error path" * 'for-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: device_cgroup: fix RCU imbalance in error case
-
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu由 Linus Torvalds 提交于
Pull percpu fixlet from Dennis Zhou: "This stops printing the base address of percpu memory on initialization" * 'for-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: stop printing kernel addresses
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here are five small fixes for some tty/serial/vt issues that have been reported. The vt one has been around for a while, it is good to finally get that resolved. The others fix a build warning that showed up in 5.1-rc1, and resolve a problem in the sh-sci driver. Note, the second patch for build warning fix for the sc16is7xx driver was just applied to the tree, as it resolves a problem with the previous patch to try to solve the issue. It has not shown up in linux-next yet, unlike all of the other patches, but it has passed 0-day testing and everyone seems to agree that it is correct" * tag 'tty-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: sc16is7xx: put err_spi and err_i2c into correct #ifdef vt: fix cursor when clearing the screen sc16is7xx: move label 'err_spi' to correct section serial: sh-sci: Fix HSCIF RX sampling point adjustment serial: sh-sci: Fix HSCIF RX sampling point calculation
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "16 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping mm/kmemleak.c: fix unused-function warning init: initialize jump labels before command line option parsing kernel/watchdog_hld.c: hard lockup message should end with a newline kcov: improve CONFIG_ARCH_HAS_KCOV help text mm: fix inactive list balancing between NUMA nodes and cgroups mm/hotplug: treat CMA pages as unmovable proc: fixup proc-pid-vm test proc: fix map_files test on F29 mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock mm: swapoff: shmem_unuse() stop eviction without igrab() mm: swapoff: take notice of completion sooner mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES mm: swapoff: shmem_find_swap_entries() filter out other types slab: store tagged freelist for off-slab slabmgmt
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging and IIO fixes from Greg KH: "Here is a bunch of IIO driver fixes, and some smaller staging driver fixes, for 5.1-rc6. The IIO fixes were delayed due to my vacation, but all resolve a number of reported issues and have been in linux-next for a few weeks with no reported issues. The other staging driver fixes are all tiny, resolving some reported issues in the comedi and most drivers, as well as some erofs fixes. All of these patches have been in linux-next with no reported issues" * tag 'staging-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (24 commits) staging: comedi: ni_usb6501: Fix possible double-free of ->usb_rx_buf staging: comedi: ni_usb6501: Fix use of uninitialized mutex staging: erofs: fix unexpected out-of-bound data access staging: comedi: vmk80xx: Fix possible double-free of ->usb_rx_buf staging: comedi: vmk80xx: Fix use of uninitialized semaphore staging: most: core: use device description as name iio: core: fix a possible circular locking dependency iio: ad_sigma_delta: select channel when reading register iio: pms7003: select IIO_TRIGGERED_BUFFER iio: cros_ec: Fix the maths for gyro scale calculation iio: adc: xilinx: prevent touching unclocked h/w on remove iio: adc: xilinx: fix potential use-after-free on probe iio: adc: xilinx: fix potential use-after-free on remove iio: dac: mcp4725: add missing powerdown bits in store eeprom io: accel: kxcjk1013: restore the range after resume. iio:chemical:bme680: Fix SPI read interface iio:chemical:bme680: Fix, report temperature in millidegrees iio: chemical: fix missing Kconfig block for sgp30 iio: adc: at91: disable adc channel interrupt in timeout case iio: gyro: mpu3050: fix chip ID reading ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc fixes from Greg KH: "Here are four small misc driver fixes for 5.1-rc6. Nothing major at all, they fix up a Kconfig issues, a SPDX invalid license tag, and two tiny bugfixes. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: drivers: power: supply: goldfish_battery: Fix bogus SPDX identifier extcon: ptn5150: fix COMPILE_TEST dependencies misc: fastrpc: add checked value for dma_set_mask habanalabs: remove low credit limit of DMA #0
-
由 Ming Lei 提交于
bvec->bv_offset may be bigger than PAGE_SIZE sometimes, such as, when one bio is splitted in the middle of one bvec via bio_split(), and bi_iter.bi_bvec_done is used to build offset of the 1st bvec of remained bio. And the remained bio's bvec may be re-submitted to fs layer via ITER_IBVEC, such as loop and nvme-loop. So we have to make sure that every bvec's offset is less than PAGE_SIZE from bio_for_each_segment_all() because some drivers(loop, nvme-loop) passes the splitted bvec to fs layer via ITER_BVEC. This patch fixes this issue reported by Zhang Yi When running nvme/011. Cc: Christoph Hellwig <hch@lst.de> Cc: Yi Zhang <yi.zhang@redhat.com> Reported-by: NYi Zhang <yi.zhang@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Fixes: 6dc4f100 ("block: allow bio_for_each_segment_all() to iterate over multi-page bvec") Signed-off-by: NMing Lei <ming.lei@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Hou Tao 提交于
all_q_node has not been used since commit 4b855ad3 ("blk-mq: Create hctx for each present CPU"), so remove it. Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: NMing Lei <ming.lei@redhat.com> Signed-off-by: NHou Tao <houtao1@huawei.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input updates from Dmitry Torokhov: - several new key mappings for HID - a host of new ACPI IDs used to identify Elan touchpads in Lenovo laptops * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: snvs_pwrkey - initialize necessary driver data before enabling IRQ HID: input: add mapping for "Toggle Display" key HID: input: add mapping for "Full Screen" key HID: input: add mapping for keyboard Brightness Up/Down/Toggle keys HID: input: add mapping for Expose/Overview key HID: input: fix mapping of aspect ratio key [media] doc-rst: switch to new names for Full Screen/Aspect keys Input: document meanings of KEY_SCREEN and KEY_ZOOM Input: elan_i2c - add hardware ID for multiple Lenovo laptops
-
由 Hans de Goede 提交于
The "ENERGY_PERF_BIAS: Set to 'normal', was 'performance'" message triggers on pretty much every Intel machine. The purpose of log messages with a warning level is to notify the user of something which potentially is a problem, or at least somewhat unexpected. This message clearly does not match those criteria, so lower its log priority from warning to info. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181230172715.17469-1-hdegoede@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Merge tag 'perf-urgent-for-mingo-5.1-20190419' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf top: Jiri Olsa: - Fix 'perf top --pid', it needs PERF_SAMPLE_TIME since we switched to using a different thread to sort the events and then even for just a single thread we now need timestamps. BPF: Jiri Olsa: - Fix bpf_prog and btf lookup functions failure path to to properly return NULL. - Fix side band thread draining, used to process PERF_RECORD_BPF_EVENT metadata records. core: Jiri Olsa: - Fix map lookup by name to get a refcount when the name is already in the tree. Found Song Liu: - Fix __map__is_kmodule() by taking into account recently added BPF maps. UAPI: Arnaldo Carvalho de Melo: - Sync sound/asound.h copy Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andrea Arcangeli 提交于
The core dumping code has always run without holding the mmap_sem for writing, despite that is the only way to ensure that the entire vma layout will not change from under it. Only using some signal serialization on the processes belonging to the mm is not nearly enough. This was pointed out earlier. For example in Hugh's post from Jul 2017: https://lkml.kernel.org/r/alpine.LSU.2.11.1707191716030.2055@eggly.anvils "Not strictly relevant here, but a related note: I was very surprised to discover, only quite recently, how handle_mm_fault() may be called without down_read(mmap_sem) - when core dumping. That seems a misguided optimization to me, which would also be nice to correct" In particular because the growsdown and growsup can move the vm_start/vm_end the various loops the core dump does around the vma will not be consistent if page faults can happen concurrently. Pretty much all users calling mmget_not_zero()/get_task_mm() and then taking the mmap_sem had the potential to introduce unexpected side effects in the core dumping code. Adding mmap_sem for writing around the ->core_dump invocation is a viable long term fix, but it requires removing all copy user and page faults and to replace them with get_dump_page() for all binary formats which is not suitable as a short term fix. For the time being this solution manually covers the places that can confuse the core dump either by altering the vma layout or the vma flags while it runs. Once ->core_dump runs under mmap_sem for writing the function mmget_still_valid() can be dropped. Allowing mmap_sem protected sections to run in parallel with the coredump provides some minor parallelism advantage to the swapoff code (which seems to be safe enough by never mangling any vma field and can keep doing swapins in parallel to the core dumping) and to some other corner case. In order to facilitate the backporting I added "Fixes: 86039bd3" however the side effect of this same race condition in /proc/pid/mem should be reproducible since before 2.6.12-rc2 so I couldn't add any other "Fixes:" because there's no hash beyond the git genesis commit. Because find_extend_vma() is the only location outside of the process context that could modify the "mm" structures under mmap_sem for reading, by adding the mmget_still_valid() check to it, all other cases that take the mmap_sem for reading don't need the new check after mmget_not_zero()/get_task_mm(). The expand_stack() in page fault context also doesn't need the new check, because all tasks under core dumping are frozen. Link: http://lkml.kernel.org/r/20190325224949.11068-1-aarcange@redhat.com Fixes: 86039bd3 ("userfaultfd: add new syscall to provide memory externalization") Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Reported-by: NJann Horn <jannh@google.com> Suggested-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NMike Rapoport <rppt@linux.ibm.com> Reviewed-by: NOleg Nesterov <oleg@redhat.com> Reviewed-by: NJann Horn <jannh@google.com> Acked-by: NJason Gunthorpe <jgg@mellanox.com> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnd Bergmann 提交于
The only references outside of the #ifdef have been removed, so now we get a warning in non-SMP configurations: mm/kmemleak.c:1404:13: error: unused function 'scan_large_block' [-Werror,-Wunused-function] Add a new #ifdef around it. Link: http://lkml.kernel.org/r/20190416123148.3502045-1-arnd@arndb.de Fixes: 298a32b1 ("kmemleak: powerpc: skip scanning holes in the .bss section") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: Vincent Whitchurch <vincent.whitchurch@axis.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-