Some systems have a modprobe.d/nfs.conf file that sets an nfs4 alias
pointing to nfs.ko, rather than nfs4.ko.  This can prevent the v4 module
from loading on mount, since the kernel sees that something named "nfs4"
has already been loaded.  To work around this, I've renamed the modules
to "nfsv2.ko" "nfsv3.ko" and "nfsv4.ko".

I also had to move the nfs4_fs_type back to nfs.ko to ensure that `mount
-t nfs4` still works.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ever since commit 0a57cdac (NFSv4.1 send layoutreturn to fence
disconnected data server) we've been sending layoutreturn calls
while there is potentially still outstanding I/O to the data
servers. The reason we do this is to avoid races between replayed
writes to the MDS and the original writes to the DS.

When this happens, the BUG_ON() in nfs4_layoutreturn_done can
be triggered because it assumes that we would never call
layoutreturn without knowing that all I/O to the DS is
finished. The fix is to remove the BUG_ON() now that the
assumptions behind the test are obsolete.
Reported-by: NBoaz Harrosh <bharrosh@panasas.com>
Reported-by: NTigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org [>=3.5]

Depending on layout and ARCH, ORE has some limits on max IO sizes
which is communicated on (what else) ore_layout->max_io_length,
which is always stripe aligned.
This was considered as the pg_test boundary for splitting and starting
a new IO.

But in the case of a long IO where the start offset is not aligned
what would happen is that both end of IO[N] and start of IO[N+1]
would be unaligned, causing each IO boundary parity unit to be
calculated and written twice.

So what we do in this patch is split the very start of an unaligned
IO, up to a stripe boundary, and then next IO's can continue fully
aligned til the end.

We might be sacrificing the case where the full unaligned IO would
fit within a single max_io_length, but the sacrifice is well worth
the elimination of double calculation and parity units IO.
Actually the sacrificing is marginal and is almost unmeasurable.

TODO:
	If we know the total expected linear segment that will
	be received, at pg_init, we could use that information
	in many places:
	1. blocks-layout get_layout write segment size
	2. Better mds-threshold
	3. In above situation for a better clean split

	I will do this in future submission.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

To allow layout driver to pass private information around
pg_init/pg_doio.
Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

since the only user of nfs4_proc_layoutget is send_layoutget, which
ignores its return value, there is no reason to return any value.
Signed-off-by: NIdan Kedar <idank@tonian.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

we have encountered a bug whereby reading a lot of files (copying
fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused
a general protection fault in xdr_shrink_bufhead. this function is
called when decoding the response from LAYOUTGET. the decoding is done
by a worker thread, and the caller of LAYOUTGET waits for the worker
thread to complete.

hitting Ctrl+C caused the synchronous wait to end and the next thing the
caller does is to free the pages, so when the worker thread calls
xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these
pages has been moved to nfs4_layoutget_release.
Signed-off-by: NIdan Kedar <idank@tonian.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...and ensure that we tear down the nfs_commit_data cache too when
unloading the module.

Cc: Bryan Schumaker <bjschuma@netapp.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

GFP_NOFS is _more_ permissive than GFP_NOIO in that it will initiate IO,
just not of any filesystem data.

The problem is that previously NOFS was correct because that avoids
recursion into the NFS code.  With swap-over-NFS, it is no longer correct
as swap IO can lead to this recursion.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Neil Brown <neilb@suse.de>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement the new swapfile a_ops for NFS and hook up ->direct_IO.  This
will set the NFS socket to SOCK_MEMALLOC and run socket reconnect under
PF_MEMALLOC as well as reset SOCK_MEMALLOC before engaging the protocol
->connect() method.

PF_MEMALLOC should allow the allocation of struct socket and related
objects and the early (re)setting of SOCK_MEMALLOC should allow us to
receive the packets required for the TCP connection buildup.

[jlayton@redhat.com: Restore PF_MEMALLOC task flags in all cases]
[dfeng@redhat.com: Fix handling of multiple swap files]
[a.p.zijlstra@chello.nl: Original patch]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Neil Brown <neilb@suse.de>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The VM does not like PG_private set on PG_swapcache pages.  As suggested
by Trond in http://lkml.org/lkml/2006/8/25/348, this patch disables NFS
data cache revalidation on swap files.  as it does not make sense to have
other clients change the file while it is being used as swap.  This avoids
setting PG_private on swap pages, since there ought to be no further races
with invalidate_inode_pages2() to deal with.

Since we cannot set PG_private we cannot use page->private which is
already used by PG_swapcache pages to store the nfs_page.  Thus augment
the new nfs_page_find_request logic.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Neil Brown <neilb@suse.de>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace all relevant occurences of page->index and page->mapping in the
NFS client with the new page_file_index() and page_file_mapping()
functions.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Neil Brown <neilb@suse.de>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

09f363c7 ("vmscan: fix shrinker callback bug in fs/super.c") fixed a
shrinker callback which was returning -1 when nr_to_scan is zero, which
caused excessive slab scanning.  But 635697c6 ("vmscan: fix initial
shrinker size handling") fixed the problem, again so we can freely return
-1 although nr_to_scan is zero.  So let's revert 09f363c7 because the
comment added in 09f363c7 made an unnecessary rule.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use a mmu_gather instead of a temporary linked list for accumulating pages
when we unmap a hugepage range
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since per-BDI flusher threads were introduced in 2.6, the pdflush
mechanism is not used any more.  But the old interface exported through
/proc/sys/vm/nr_pdflush_threads still exists and is obviously useless.

For back-compatibility, printk warning information and return 2 to notify
the users that the interface is removed.
Signed-off-by: NWanpeng Li <liwp@linux.vnet.ibm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have no mechanism to emulate LOCK_MAND locks on NFSv4, so explicitly
return -EINVAL if someone requests it.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

By default a sunrpc service is limited to (N+3)*20 connections
where N is the number of threads.  This is 80 when N==1.
If this number is exceeded a warning is printed suggesting that
the number of threads be increased.  However with services which
run a single thread, this is impossible.

For such services there is a ->sv_maxconn setting that can be
used to forcibly increase the limit, and silence the message.
This is used by lockd.

The nfs client uses a sunrpc service to handle callbacks and
it too is single-threaded, so to avoid the useless messages,
and to allow a reasonable number of concurrent connections,
we need to set ->sv_maxconn.  1024 seems like a good number.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There are two structures in which a count of snapshots are
maintained:

    struct ceph_snap_context {
	...
        u32 num_snaps;
	...
    }
and
    struct ceph_snap_realm {
	...
        u32 num_prior_parent_snaps;   /*  had prior to parent_since */
	...
        u32 num_snaps;
	...
    }

These fields never take on negative values (e.g., to hold special
meaning), and so are really inherently unsigned.  Furthermore they
take their value from over-the-wire or on-disk formatted 32-bit
values.

So change their definition to have type u32, and change some spots
elsewhere in the code to account for this change.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

We re-run the loop but we don't re-set the attrs pointer back to NULL.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

When we detect a mds session reset, close the old ceph_connection before
reopening it.  This ensures we clean up the old socket properly and keep
the ceph_connection state correct.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>

When we restore file descriptors we would like them to look exactly as
they were at dumping time.

With help of fcntl it's almost possible, the missing snippet is file
owners UIDs.

To be able to read their values the F_GETOWNER_UIDS is introduced.

This option is valid iif CONFIG_CHECKPOINT_RESTORE is turned on, otherwise
returning -EINVAL.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Support the caching of large files.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=31182Signed-off-by: NJustin Lecher <jlec@gentoo.org>
Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.com>
Tested-by: NSuresh Jayaraman <sjayaraman@suse.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__mem_open() which is called by both /proc/<pid>/environ and
/proc/<pid>/mem ->open() handlers will allow the use of negative offsets.
/proc/<pid>/mem has negative offsets but not /proc/<pid>/environ.

Clean this by moving the 'force FMODE_UNSIGNED_OFFSET flag' to mem_open()
to allow negative offsets only on /proc/<pid>/mem.
Signed-off-by: NDjalal Harouni <tixxdz@opendz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Brad Spengler <spender@grsecurity.net>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently the following offset and environment address range check in
environ_read() of /proc/<pid>/environ is buggy:

  int this_len = mm->env_end - (mm->env_start + src);
  if (this_len <= 0)
    break;

Large or negative offsets on /proc/<pid>/environ converted to 'unsigned
long' may pass this check since '(mm->env_start + src)' can overflow and
'this_len' will be positive.

This can turn /proc/<pid>/environ to act like /proc/<pid>/mem since
(mm->env_start + src) will point and read from another VMA.

There are two fixes here plus some code cleaning:

1) Fix the overflow by checking if the offset that was converted to
   unsigned long will always point to the [mm->env_start, mm->env_end]
   address range.

2) Remove the truncation that was made to the result of the check,
   storing the result in 'int this_len' will alter its value and we can
   not depend on it.

For kernels that have commit b409e578 ("proc: clean up
/proc/<pid>/environ handling") which adds the appropriate ptrace check and
saves the 'mm' at ->open() time, this is not a security issue.

This patch is taken from the grsecurity patch since it was just made
available.
Signed-off-by: NDjalal Harouni <tixxdz@opendz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Brad Spengler <spender@grsecurity.net>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit 898b374a ("exec: replace call_usermodehelper_pipe with use
of umh init function and resolve limit"), the core limits recursive
check value was changed from 0 to 1, but the corresponding comments were
not updated.
Signed-off-by: NJovi Zhang <bookjovi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Nearly identical shortname parsing is performed in fat_search_long() and
__fat_readdir().  Extract this code into a function that may be called by
both.
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Acked-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simplify code by providing accessor functions for the directory entry
start cluster fields.
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Acked-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use -ENOMEM return value instead of -EINVAL when kzalloc() fails.
Signed-off-by: NNamjae Jeon <linkinjeon@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add omitted comments for different structures in driver implementation.
Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

An fs-thaw ioctl causes deadlock with a chcp or mkcp -s command:

 chcp            D ffff88013870f3d0     0  1325   1324 0x00000004
 ...
 Call Trace:
   nilfs_transaction_begin+0x11c/0x1a0 [nilfs2]
   wake_up_bit+0x20/0x20
   copy_from_user+0x18/0x30 [nilfs2]
   nilfs_ioctl_change_cpmode+0x7d/0xcf [nilfs2]
   nilfs_ioctl+0x252/0x61a [nilfs2]
   do_page_fault+0x311/0x34c
   get_unmapped_area+0x132/0x14e
   do_vfs_ioctl+0x44b/0x490
   __set_task_blocked+0x5a/0x61
   vm_mmap_pgoff+0x76/0x87
   __set_current_blocked+0x30/0x4a
   sys_ioctl+0x4b/0x6f
   system_call_fastpath+0x16/0x1b
 thaw            D ffff88013870d890     0  1352   1351 0x00000004
 ...
 Call Trace:
   rwsem_down_failed_common+0xdb/0x10f
   call_rwsem_down_write_failed+0x13/0x20
   down_write+0x25/0x27
   thaw_super+0x13/0x9e
   do_vfs_ioctl+0x1f5/0x490
   vm_mmap_pgoff+0x76/0x87
   sys_ioctl+0x4b/0x6f
   filp_close+0x64/0x6c
   system_call_fastpath+0x16/0x1b

where the thaw ioctl deadlocked at thaw_super() when called while chcp was
waiting at nilfs_transaction_begin() called from
nilfs_ioctl_change_cpmode().  This deadlock is 100% reproducible.

This is because nilfs_ioctl_change_cpmode() first locks sb->s_umount in
read mode and then waits for unfreezing in nilfs_transaction_begin(),
whereas thaw_super() locks sb->s_umount in write mode.  The locking of
sb->s_umount here was intended to make snapshot mounts and the downgrade
of snapshots to checkpoints exclusive.

This fixes the deadlock issue by replacing the sb->s_umount usage in
nilfs_ioctl_change_cpmode() with a dedicated mutex which protects snapshot
mounts.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Tested-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The checkpoint deletion ioctl (rmcp ioctl) has potential for breaking
snapshot because it is not fully exclusive with checkpoint mode change
ioctl (chcp ioctl).

The rmcp ioctl first tests if the specified checkpoint is a snapshot or
not within nilfs_cpfile_delete_checkpoint function, and then calls
nilfs_cpfile_delete_checkpoints function to actually invalidate the
checkpoint only if it's not a snapshot.  However, the checkpoint can be
changed into a snapshot by the chcp ioctl between these two operations.
In that case, calling nilfs_cpfile_delete_checkpoints() wrongly
invalidates the snapshot, which leads to snapshot list corruption and
snapshot count mismatch.

This fixes the issue by changing nilfs_cpfile_delete_checkpoints() so
that it reconfirms the target checkpoints are snapshot or not.

This second check is exclusive with the chcp operation since it is
protected by an existing semaphore.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

->delete_inode(), ->write_super_lockfs(), ->unlockfs() are gone so remove
references to them in the NTFS code.  Noticed while cleaning up the
fsfreeze mess.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add omitted comment for ns_mount_state field of the_nilfs structure.
Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On minix2 and minix3 usually max_size is 7fffffff and the check in
question prohibits creation of last block spanning right before 7fffffff,
due to downward rounding during the division.  Fix it by using
multiplication instead.

[akpm@linux-foundation.org: fix up code layout, use local `sb']
Signed-off-by: NVladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert ext4_count_free() to use memweight() instead of table lookup
based counting clear bits implementation.  This change only affects the
code segments enabled by EXT4FS_DEBUG.

Note that this memweight() call can't be replaced with a single
bitmap_weight() call, although the pointer to the memory area is aligned
to long-word boundary.  Because the size of the memory area may not be a
multiple of BITS_PER_LONG, then it returns wrong value on big-endian
architecture.

This also includes the following change.

- Remove unnecessary map == NULL check in ext4_count_free() which
  always takes non-null pointer as the memory area.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert ext3_count_free() to use memweight() instead of table lookup
based counting clear bits implementation.  This change only affects the
code segments enabled by EXT3FS_DEBUG.

Note that this memweight() call can't be replaced with a single
bitmap_weight() call, although the pointer to the memory area is aligned
to long-word boundary.  Because the size of the memory area may not be a
multiple of BITS_PER_LONG, then it returns wrong value on big-endian
architecture.

This also includes the following changes.

- Remove unnecessary map == NULL check in ext3_count_free() which
  always takes non-null pointer as the memory area.

- Fix printk format warning that only reveals with EXT3FS_DEBUG.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NJan Kara <jack@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert ext2_count_free() to use memweight() instead of table lookup
based counting clear bits implementation.  This change only affects the
code segments enabled by EXT2FS_DEBUG.

Note that this memweight() call can't be replaced with a single
bitmap_weight() call, although the pointer to the memory area is aligned
to long-word boundary.  Because the size of the memory area may not be a
multiple of BITS_PER_LONG, then it returns wrong value on big-endian
architecture.

This also includes the following changes.

- Remove unnecessary map == NULL check in ext2_count_free() which
  always takes non-null pointer as the memory area.

- Fix printk format warning that only reveals with EXT2FS_DEBUG.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use memweight to count the total number of bits set in memory area.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use memweight() to count the total number of bits set in memory area.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use memweight() to count the total number of bits clear in memory area.

Note that this memweight() call can't be replaced with a single
bitmap_weight() call, although the pointer to the memory area is aligned
to long-word boundary.  Because the size of the memory area may not be a
multiple of BITS_PER_LONG, then it returns wrong value on big-endian
architecture.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NAnders Larsen <al@alarsen.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the generic printk_get_level() to search a message for a kern_level.

Add __printf to verify format and arguments.  Fix a few messages that
had mismatches in format and arguments.  Add #ifdef CONFIG_PRINTK blocks
to shrink the object size a bit when not using printk.

[akpm@linux-foundation.org: whitespace tweak]
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>