- 30 4月, 2019 40 次提交
-
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
Ordered csums are keyed off of a btrfs_ordered_extent, which already has a reference to the inode. This implies that an explicit inode argument is redundant. So remove it. Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
There are at least 2 reports about a memory bit flip sneaking into on-disk data. Currently we only have a relaxed check triggered at btrfs_mark_buffer_dirty() time, as it's not mandatory and only for CONFIG_BTRFS_FS_CHECK_INTEGRITY enabled build, it doesn't help users to detect such problem. This patch will address the hole by triggering comprehensive check on tree blocks before writing it back to disk. The design points are: - Timing of the check: Tree block write hook This timing is chosen to reduce the overhead. The comprehensive check should be as expensive as a checksum calculation. Doing full check at btrfs_mark_buffer_dirty() is too expensive for end user. - Loose empty leaf check Originally for an empty leaf, tree-checker will report error if it's not a tree root. The problem for such check at write time is: * False alert for tree root created in current transaction In that case, the commit root still needs to be written to disk. And since current root can differ from commit root, then it will cause false alert. This happens for log tree. * False alert for relocated tree block Relocated tree block can be written to disk due to memory pressure, in that case an empty csum tree root can be written to disk and cause false alert, since csum root node hasn't been updated. Previous patch of removing comprehensive empty leaf owner check has paved the way for this patch. The example error output will be something like: BTRFS critical (device dm-3): corrupt leaf: root=2 block=1350630375424 slot=68, bad key order, prev (10510212874240 169 0) current (1714119868416 169 0) BTRFS error (device dm-3): block=1350630375424 write time tree block corruption detected BTRFS: error (device dm-3) in btrfs_commit_transaction:2220: errno=-5 IO failure (Error while writing out transaction) BTRFS info (device dm-3): forced readonly BTRFS warning (device dm-3): Skipping commit of aborted transaction. BTRFS: error (device dm-3) in cleanup_transaction:1839: errno=-5 IO failure BTRFS info (device dm-3): delayed_refs has NO entry Reported-by: NLeonard Lausen <leonard@lausen.nl> Signed-off-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
Commit 1ba98d08 ("Btrfs: detect corruption when non-root leaf has zero item") introduced comprehensive root owner checker. However it's pretty expensive tree search to locate the owner root, especially when it get reused by mandatory read and write time tree-checker. This patch will remove that check, and completely rely on owner based empty leaf check, which is much faster and still works fine for most case. And since we skip the old root owner check, now write time tree check can be merged with btrfs_check_leaf_full(). Signed-off-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Robbie Ko 提交于
When doing fallocate, we first add the range to the reserve_list and then reserve the quota. If quota reservation fails, we'll release all reserved parts of reserve_list. However, cur_offset is not updated to indicate that this range is already been inserted into the list. Therefore, the same range is freed twice. Once at list_for_each_entry loop, and once at the end of the function. This will result in WARN_ON on bytes_may_use when we free the remaining space. At the end, under the 'out' label we have a call to: btrfs_free_reserved_data_space(inode, data_reserved, alloc_start, alloc_end - cur_offset); The start offset, third argument, should be cur_offset. Everything from alloc_start to cur_offset was freed by the list_for_each_entry_safe_loop. Fixes: 18513091 ("btrfs: update btrfs_space_info's bytes_may_use timely") Reviewed-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NRobbie Ko <robbieko@synology.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
Instead of always calling the allocator to search for a free extent, that satisfies the input criteria, switch btrfs_trim_free_extents to using find_first_clear_extent_bit. With this change it's no longer necessary to read the device tree in order to figure out holes in the devices. Now the code always searches in-memory data structure to figure out the space range which contains the requested which should result in speed improvements. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
This function is very similar to find_first_extent_bit except that it locates the first contiguous span of space which does not have bits set. It's intended use is in the freespace trimming code. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
Currently unallocated chunks are always trimmed. For example 2 consecutive trims on large storage would trim freespace twice irrespective of whether the space was actually allocated or not between those trims. Optimise this behavior by exploiting the newly introduced alloc_state tree of btrfs_device. A new CHUNK_TRIMMED bit is used to mark those unallocated chunks which have been trimmed and have not been allocated afterwards. On chunk allocation the respective underlying devices' physical space will have its CHUNK_TRIMMED flag cleared. This avoids submitting discards for space which hasn't been changed since the last time discard was issued. This applies to the single mount period of the filesystem as the information is not stored permanently. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
This is used in more than one places so let's factor it out in ctree.h. No functional changes. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
Now that these functions no longer require a handle to transaction to inspect pending/pinned chunks the argument can be removed. At the same time also remove any surrounding code which acquired the handle. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Jeff Mahoney 提交于
The pending chunks list contains chunks that are allocated in the current transaction but haven't been created yet. The pinned chunks list contains chunks that are being released in the current transaction. Both describe chunks that are not reflected on disk as in use but are unavailable just the same. The pending chunks list is anchored by the transaction handle, which means that we need to hold a reference to a transaction when working with the list. The way we use them is by iterating over both lists to perform comparisons on the stripes they describe for each device. This is backwards and requires that we keep a transaction handle open while we're trimming. This patchset adds an extent_io_tree to btrfs_device that maintains the allocation state of the device. Extents are set dirty when chunks are first allocated -- when the extent maps are added to the mapping tree. They're cleared when last removed -- when the extent maps are removed from the mapping tree. This matches the lifespan of the pending and pinned chunks list and allows us to do trims on unallocated space safely without pinning the transaction for what may be a lengthy operation. We can also use this io tree to mark which chunks have already been trimmed so we don't repeat the operation. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
Following the introduction of the alloc_state tree, some of the callees of btrfs_mapping_tree_free will have to interact with the btrfs_device of the constituent devices. Enable this by moving the code responsible for freeing devices after the last user (btrfs_mapping_tree_free). Otherwise the kernel could crash due to use-after-free. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
btrfs_device structs are freed from RCU context since device iteration is protected by RCU. Currently this is achieved by using call_rcu since no blocking functions are called within btrfs_free_device. Future refactoring of pending/pinned chunks will require calling sleeping functions. This patch is in preparation for these changes by simply switching from RCU callbacks to explicit calls of synchronize_rcu and calling btrfs_free_device directly. This is functionally equivalent, making sure that there are no readers at that time. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
It will be used in a future patch that will require modifying an extent_io_tree struct under a spinlock. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
Rather than hijacking the existing defines let's just define new bits, with more descriptive names. Instead of using yet more (currently at 18) bits for the new flags, use the fact those flags will be specific to the device allocation tree so define them using existing EXTENT_* flags. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
Chunks read from disk currently don't get their ->orig_block_len member set, in contrast when a new chunk is allocated, the respective extent_map's ->orig_block_len is assigned the size of the stripe of this chunk. Let's apply the same strategy for chunks which are read from disk, not only does this codify the invariant that ->orig_block_len always contains the size of the stripe for a chunk (when the em belongs to the mapping tree). But it's also a preparatory patch for further work around tracking chunk allocation in an extent tree rather than pinned/pending lists. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
This function is going to be used to clear out the device extent allocation information. Give it a more generic name and export it. This is in preparation to replacing the pending/pinned chunk lists with an extent tree. No functional changes. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
During device shrink pinned/pending chunks (i.e. those which have been deleted/created respectively, in the current transaction and haven't touched disk) need to be accounted when doing device shrink. Presently this happens after the main relocation loop in btrfs_shrink_device, which could lead to making another go in the body of the function. Since there is no hard requirement to perform pinned/pending chunks handling after the relocation loop, move the code before it. This leads to simplifying the code flow around - i.e. no need to use 'goto again'. A notable side effect of this change is that modification of the device's size requires a transaction to be started and committed before the relocation loop starts. This is necessary to ensure that relocation process sees the shrunk device size. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-