- 07 10月, 2010 1 次提交
-
-
由 Sunil Mushran 提交于
ocfs2/cluster: Print messages when adding/removing heartbeat regions Prints messages when the user adds or removes heartbeat regions in global heartbeat mode. These messages are useful when debugging cluster related issues. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
-
- 08 10月, 2010 1 次提交
-
-
由 Sunil Mushran 提交于
ocfs2/dlm: Add message DLM_QUERY_NODEINFO Adds new dlm message DLM_QUERY_NODEINFO that sends the attributes of all registered nodes. This message is sent if the negotiated dlm protocol is 1.1 or higher. If the information of the joining node does not match that of any existing nodes, the join domain request is rejected. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
-
- 07 10月, 2010 1 次提交
-
-
由 Sunil Mushran 提交于
ocfs2: Print message if user mounts without starting global heartbeat In global heartbeat mode, the heartbeat is started by the user. This patch prints an error if the user attempts to mount a volume without starting the heartbeat. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
-
- 10 10月, 2010 1 次提交
-
-
由 Sunil Mushran 提交于
ocfs2/dlm: Add message DLM_QUERY_REGION Adds new dlm message DLM_QUERY_REGION that sends the names of all active heartbeat regions. This message is only sent in the global heartbeat mode. If the regions in the joining node do not fully match the ones in the active nodes, the join domain request is rejected. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
-
- 08 10月, 2010 1 次提交
-
-
由 Sunil Mushran 提交于
ocfs2/cluster: Get all heartbeat regions Export function in o2hb to get a list of heartbeat regions. It also adds an upper limit to the length of the heartbeat region name. o2hb_global_heartbeat_active() currently disables global heartbeat. It will be enabled in a later patch after all the code is added. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
-
- 07 10月, 2010 1 次提交
-
-
由 Sunil Mushran 提交于
ocfs2/dlm: Expose dlm_protocol in dlm_state Add dlm_protocol to the list of info shown by the debugfs file, dlm_state. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
-
- 08 10月, 2010 1 次提交
-
-
由 Sunil Mushran 提交于
ocfs2: Add support for heartbeat=global mount option Adds support for heartbeat=global mount option. It ensures that the heartbeat mode passed matches the one enabled on disk. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
-
- 10 10月, 2010 1 次提交
-
-
由 Sunil Mushran 提交于
ocfs2: Add an incompat feature flag OCFS2_FEATURE_INCOMPAT_CLUSTERINFO OCFS2_FEATURE_INCOMPAT_CLUSTERINFO allows us to use sb->s_cluster_info for both userspace and o2cb cluster stacks. It also allows us to extend cluster info to include stack flags. This patch also adds stackflags to sb->s_clusterinfo. It also introduces a clusterinfo flag OCFS2_CLUSTER_O2CB_GLOBAL_HEARTBEAT to denote the enabled global heartbeat mode. This incompat flag can be set/cleared using tunefs.ocfs2 --fs-features. The clusterinfo flag is set/cleared using tunefs.ocfs2 --update-cluster-stack. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
-
- 08 10月, 2010 1 次提交
-
-
由 Sunil Mushran 提交于
ocfs2/cluster: Add heartbeat mode configfs parameter Add heartbeat mode parameter to the configfs tree. This will be used to set/show the heartbeat mode. The user is free to toggle the mode between local and global as long as there is no active heartbeat region. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
-
- 07 10月, 2010 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: Octeon: Place cnmips_cu2_setup in __init memory. MIPS: Don't place cu2 notifiers in __cpuinitdata MIPS: Calculate VMLINUZ_LOAD_ADDRESS based on the length of vmlinux.bin MIPS: Alchemy: Resolve prom section mismatches MIPS: Fix syscall 64 bit number comments. MIPS: Hookup fanotify_init, fanotify_mark, and prlimit64 syscalls. MIPS: TX49xx: Rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN MIPS: N32: Fix getdents64 syscall for n32 MIPS: Remove pr_<level> uses of KERN_<level> MIPS: PNX8550: Sort out machine halt, restart and powerdown functions. MIPS: GIC: Remove dependencies from Malta files. MIPS: Kconfig: Fix and clarify kconfig help text for VSMP and SMTC. MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask. MIPS: Audit: Fix hang in entry.S. MIPS: Document why RELOC_HIDE is there. MIPS: Octeon: Determine if helper needs to be built MIPS: Use generic atomic64 for 32-bit kernels MIPS: RM7000: Symbol should be static MIPS: kspd: Adjust confusing if indentation MIPS: Fix a typo.
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: writeback: always use sb->s_bdi for writeback purposes
-
git://xenbits.xen.org/people/sstabellini/linux-pvhvm由 Linus Torvalds 提交于
* 'v2.6.36-rc6-urgent-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: do not initialize PV timers on HVM if !xen_have_vector_callback xen: do not set xenstored_ready before xenbus_probe on hvm
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: Initialize total_len in fuse_retrieve()
-
- 06 10月, 2010 5 次提交
-
-
由 Stephen Rothwell 提交于
Since powerpc uses -Werror on arch powerpc, the build was broken like this: cc1: warnings being treated as errors arch/powerpc/kernel/module.c: In function 'module_finalize': arch/powerpc/kernel/module.c:66: error: unused variable 'err' Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: rcu_read_lock_bh_held(): disabling irqs also disables bh generic-ipi: Fix deadlock in __smp_call_function_single
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf trace scripting: Fix extern struct definitions perf ui hist browser: Fix segfault on 'a' for annotate perf tools: Fix build breakage perf, x86: Handle in flight NMIs on P4 platform oprofile, ARM: Release resources on failure oprofile: Add Support for Intel CPU Family 6 / Model 29
-
由 Evgeny Kuznetsov 提交于
The "flags" member of "struct wait_queue_t" is used in several places in the kernel code without beeing initialized by init_wait(). "flags" is used in bitwise operations. If "flags" not initialized then unexpected behaviour may take place. Incorrect flags might used later in code. Added initialization of "wait_queue_t.flags" with zero value into "init_wait". Signed-off-by: NEvgeny Kuznetsov <EXT-Eugeny.Kuznetsov@nokia.com> [ The bit we care about does end up being initialized by both prepare_to_wait() and add_to_wait_queue(), so this doesn't seem to cause actual bugs, but is definitely the right thing to do -Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
With all the recent module loading cleanups, we've minimized the code that sits under module_mutex, fixing various deadlocks and making it possible to do most of the module loading in parallel. However, that whole conversion totally missed the rather obscure code that adds a new module to the list for BUG() handling. That code was doubly obscure because (a) the code itself lives in lib/bugs.c (for dubious reasons) and (b) it gets called from the architecture-specific "module_finalize()" rather than from generic code. Calling it from arch-specific code makes no sense what-so-ever to begin with, and is now actively wrong since that code isn't protected by the module loading lock any more. So this commit moves the "module_bug_{finalize,cleanup}()" calls away from the arch-specific code, and into the generic code - and in the process protects it with the module_mutex so that the list operations are now safe. Future fixups: - move the module list handling code into kernel/module.c where it belongs. - get rid of 'module_bug_list' and just use the regular list of modules (called 'modules' - imagine that) that we already create and maintain for other reasons. Reported-and-tested-by: NThomas Gleixner <tglx@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Adrian Bunk <bunk@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 10月, 2010 21 次提交
-
-
由 Stefano Stabellini 提交于
if !xen_have_vector_callback do not initialize PV timer unconditionally because we still don't know how many cpus are available and if there is more than one we won't be able to receive the timer interrupts on cpu > 0. This patch fixes an hang at boot when Xen does not support vector callbacks and the guest has multiple vcpus. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>
-
由 Stefano Stabellini 提交于
Register_xenstore_notifier should guarantee that the caller gets notified even if xenstore is already up. Therefore we revert "do not notify callers from register_xenstore_notifier" and set xenstored_read at the right time for PV on HVM guests too. In fact in case of PV on HVM guests xenstored is ready only after the platform pci driver has completed the initialization, so do not set xenstored_ready before the call to xenbus_probe(). This patch fixes a shutdown_event watcher registration bug that causes "xm shutdown" not to work properly. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: max8649 - fix setting extclk_freq regulator: fix typo in current units regulator: fix device_register() error handling
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'merge-powerpc' of git://git.secretlab.ca/git/linux-2.6: powerpc/5200: tighten up ac97 reset timing powerpc/5200: efika.c: Add of_node_put to avoid memory leak powerpc/512x: fix clk_get() return value
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: i2c/other/ak4xx-adda: Fix a compile warning with CONFIG_PROCFS=n ALSA: prevent heap corruption in snd_ctl_new()
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: f71882fg: use a muxed resource lock for the Super I/O port
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix memory leaks in pcc_cpufreq_do_osc [CPUFREQ] acpi-cpufreq: add missing __percpu markup
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'merge-spi' of git://git.secretlab.ca/git/linux-2.6: of/spi: Fix OF-style driver binding of spi devices spi: spi-gpio.c tests SPI_MASTER_NO_RX bit twice, but not SPI_MASTER_NO_TX spi/mpc8xxx: fix buffer overrun on large transfers
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: vlan: dont drop packets from unknown vlans in promiscuous mode Phonet: Correct header retrieval after pskb_may_pull um: Proper Fix for f25c80a4: remove duplicate structure field initialization ip_gre: Fix dependencies wrt. ipv6. net-2.6: SYN retransmits: Add new parameter to retransmits_timed_out() iwl3945: queue the right work if the scan needs to be aborted mac80211: fix use-after-free
-
git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel由 Linus Torvalds 提交于
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915: Rephrase pwrite bounds checking to avoid any potential overflow drm/i915: Sanity check pread/pwrite drm/i915: Use pipe state to tell when pipe is off drm/i915: vblank status not valid while training display port drivers/gpu/drm/i915/i915_gem.c: Add missing error handling code drm/i915: Fix refleak during eviction. drm/i915: fix GMCH power reporting
-
由 Hugh Dickins 提交于
Building under memory pressure, with KSM on 2.6.36-rc5, collapsed with an internal compiler error: typically indicating an error in swapping. Perhaps there's a timing issue which makes it now more likely, perhaps it's just a long time since I tried for so long: this bug goes back to KSM swapping in 2.6.33. Notice how reuse_swap_page() allows an exclusive page to be reused, but only does SetPageDirty if it can delete it from swap cache right then - if it's currently under Writeback, it has to be left in cache and we don't SetPageDirty, but the page can be reused. Fine, the dirty bit will get set in the pte; but notice how zap_pte_range() does not bother to transfer pte_dirty to page_dirty when unmapping a PageAnon. If KSM chooses to share such a page, it will look like a clean copy of swapcache, and not be written out to swap when its memory is needed; then stale data read back from swap when it's needed again. We could fix this in reuse_swap_page() (or even refuse to reuse a page under writeback), but it's more honest to fix my oversight in KSM's write_protect_page(). Several days of testing on three machines confirms that this fixes the issue they showed. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
2.6.36-rc1 commit 21d0d443 "rmap: resurrect page_address_in_vma anon_vma check" was right to resurrect that check; but now that it's comparing anon_vma->roots instead of just anon_vmas, there's a danger of oopsing on a NULL anon_vma. In most cases no NULL anon_vma ever gets here; but it turns out that occasionally KSM, when enabled on a forked or forking process, will itself call page_address_in_vma() on a "half-KSM" page left over from an earlier failed attempt to merge - whose page_anon_vma() is NULL. It's my bug that those should be getting here at all: I thought they were already dealt with, this oops proves me wrong, I'll fix it in the next release - such pages are effectively pinned until their process exits, since rmap cannot find their ptes (though swapoff can). For now just work around it by making page_address_in_vma() safe (and add a comment on why that check is wanted anyway). A similar check in __page_check_anon_rmap() is safe because do_page_add_anon_rmap() already excluded KSM pages. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Daney 提交于
It is an early_initcall, so it should be in __init memory. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1593/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
The notifiers may be called at any time, so the notifier_block cannot be in init memory. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1592/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Shmulik Ladkani 提交于
Fix VMLINUZ_LOAD_ADDRESS calculation to be based on the length of vmlinux.bin, the actual uncompressed kernel binary. Previously it was based on the length of KBUILD_IMAGE (the unstripped ELF vmlinux), which is bigger than vmlinux.bin. As a result, vmlinuz was loaded into a memory address higher then actually needed - a problem for small memory platforms. Signed-off-by: NShmulik Ladkani <shmulik.ladkani@gmail.com> To: linux-mips@linux-mips.org Cc: alex@digriz.org.uk Cc: manuel.lauss@googlemail.com Cc: sam@ravnborg.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1564/Acked-by: NWu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Manuel Lauss 提交于
The function prom_init_cmdline() references the variable __initdata arcs_cmdline. The function prom_get_ethernet_addr() references the variable __initdata arcs_cmdline. Annotate prom_init_cmdline() as __init, unexport and annotate prom_get_ethernet_addr() since it's no longer called from within driver code. Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1547/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Noticed and original patch by Philby John <pjohn@mvista.com>. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1553/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 FUJITA Tomonori 提交于
Architectures need to set ARCH_DMA_MINALIGN to the minimum DMA alignment (commit a6eb9fe1). Defining ARCH_KMALLOC_MINALIGN doesn't work anymore. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: anemo@mba.ocn.ne.jp Patchwork: https://patchwork.linux-mips.org/patch/1544/Acked-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Bernhard Walle 提交于
Commit 31c984a5 introduced a new syscall getdents64. However, in the syscall table, the new syscall still refers to the old getdents which doesn't work. The problem appeared with a system that uses the eglibc 2.12-r11187 (that utilizes that new syscall) is very confused. The fix has been tested with that eglibc version. Signed-off-by: NBernhard Walle <walle@corscience.de> To: linux-mips@linux-mips.org Cc: ddaney@caviumnetworks.com Cc: akpm@linux-foundation.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1567/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Joe Perches 提交于
These would result in KERN_<level> actually getting printed. Signed-off-by: NJoe Perches <joe@perches.com> To: Jiri Kosina <trivial@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1581/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-