- 24 2月, 2008 5 次提交
-
-
由 Thomas Graf 提交于
RTM_NEWLINK allows for already existing links to be modified. For this purpose do_setlink() is called which expects address attributes with a payload length of at least dev->addr_len. This patch adds the necessary validation for the RTM_NEWLINK case. The address length for links to be created is not checked for now as the actual attribute length is used when copying the address to the netdevice structure. It might make sense to report an error if less than addr_len bytes are provided but enforcing this might break drivers trying to be smart with not transmitting all zero addresses. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
When asked to blink LEDs the tg3 driver behaves when using: ethtool -p ethX The default value for data is zero, and other drivers interpret this as blink forever (or at least a really long time). The tg3 driver interprets this as blink once. All drivers should have the same behaviour. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Because of some board issues, we need to disable parallel detect on an HP blade. Without this patch, the link state can become stuck when it goes into parallel detect mode. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The previous patches to workaround the 5706S on an HP blade were not sufficient. The link state still does not change properly in some cases. This patch adds polling to make it completely reliable. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 2月, 2008 13 次提交
-
-
由 Michael Buesch 提交于
We must pin all resources and make sure the PCI subsystem won't relocate us, as the addresses are hardwired into hardware. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This silences sparse when run on zd1211rw. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This silences a few sparse warnings. There are two more where I can't follow the code. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes the pcicore driver to not die a horrible crash death when inserting a cardbus card. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes the GPIO API to be reentrancy safe. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes the GPIO API to be usable. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes the SSB watchdog access for devices without a chipcommon. These devices have the watchdog on the extif. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes the baud settings for new devices like the Linksys WRT350n. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Miller 提交于
'u64' is not necessarily 'unsigned long long' drivers/net/wireless/ath5k/base.c: In function 'ath5k_beacon_update_timers': drivers/net/wireless/ath5k/base.c:2130: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/base.c:2130: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' drivers/net/wireless/ath5k/base.c: In function 'ath5k_intr': drivers/net/wireless/ath5k/base.c:2391: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64' Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jiri Slaby 提交于
sparse sees int -> bool cast as an error: hw.c:3754:10: warning: cast truncates bits from constant value (ffffffea becomes 0) Fix it by converting the rettype to int and check appropriately. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jiri Slaby 提交于
Omitted lock causes sparse warning drivers/net/wireless/ath5k/base.c:1682:1: warning: context imbalance in 'ath5k_tasklet_rx' - different lock contexts for basic block Add the lock to the guilty fail path. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Acked-by: NNick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Based on report from Cavan Carroll <cavancarroll@hotmail.com>: http://bugzilla.kernel.org/show_bug.cgi?id=9863 Cc: Cavan Carroll <cavancarroll@hotmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo Couckuyt 提交于
Retarget of an old patch against prism54usb in linux-wireless archive: http://marc.info/?l=linux-wireless&m=117449935810254&w=2 Cc: Ivo Couckuyt <iv0co@yahoo.co.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 2月, 2008 15 次提交
-
-
由 Denis V. Lunev 提交于
release_net is missed on the error path in pneigh_lookup. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This counter is currently write-only. Drawing an analogy with the similar tcp counter, I think that this one should be pointed by the sockets_allocated members of sctp_prot and sctpv6_prot. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
When deleting the veth driver, veth_close calls netif_carrier_off for the two extremities of the network device. netif_carrier_off on the peer device will fire an event and hold a reference on the peer device. Just after, the peer is unregistered taking the rtnl_lock while the linkwatch_event is scheduled. If __linkwatch_run_queue does not occurs before the unregistering, unregister_netdevice will wait for the dev refcount to reach zero holding the rtnl_lock and linkwatch_event will wait for the rtnl_lock and hold the dev refcount. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matheos Worku 提交于
From: Matheos Worku <Matheos.Worku@Sun.COM> 1) niu_enable_alt_mac() needs to be adjusted so that the mask is computed properly for the BMAC case. 2) BMAC has 6 alt MAC addresses available, not 7. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
As reported by David Woodhouse <dwmw2@infradead.org>, using u_int32_t in struct nf_inet_addr breaks the busybox build. Fix by using __u32. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
The host address parts need to be converted to host-endian first before arithmetic makes any sense on them. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
By allocating ->hinfo, we already have the needed indirection to cope with the per-cpu xtables struct match_entry. [Patrick: do this now before the revision 1 struct is used by userspace] Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert P. J. Day 提交于
Since the header file xt_policy.h tests __KERNEL__, it should be unifdef'ed before exporting to userspace. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joonwoo Park 提交于
http://bugzilla.kernel.org/show_bug.cgi?id=9920 The function skb_make_writable returns true or false. Signed-off-by: NJoonwoo Park <joonwpark81@gmail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The int ret variable is used only to trigger the BUG_ON() after the skb_copy_bits() call, so check the call failure directly and drop the variable. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
As reported by Tomas Simonaitis <tomas.simonaitis@gmail.com>, inserting new data in skbs queued over {ip,ip6,nfnetlink}_queue triggers a SKB_LINEAR_ASSERT in skb_put(). Going back through the git history, it seems this bug is present since at least 2.6.12-rc2, probably even since the removal of skb_linearize() for netfilter. Linearize non-linear skbs through skb_copy_expand() when enlarging them. Tested by Thomas, fixes bugzilla #9933. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
Unless I miss a guaranteed relation between between "f" and "new_fa->fa_info" this patch is required for fixing a NULL dereference introduced by commit a6501e08 ("[IPV4] FIB_HASH: Reduce memory needs and speedup lookups") and spotted by the Coverity checker. Eric Dumazet says: Hum, you are right, kmem_cache_free() doesnt allow a NULL object, like kfree() does. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
The Coverity checker spotted that less memory than required was allocated. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
IFLA_LINK is no longer a write-only attribute on the kernel side and must thus be validated. Same goes for the newly introduced IFLA_LINKINFO. Fixes undefined behaviour if either of the attributes are not well formed. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jorge Boncompte [DTI2] 提交于
Commit a0a400d7 ("[NET]: dev_mcast: add multicast list synchronization helpers") from you introduced a new field "da_synced" to struct dev_addr_list that is not properly initialized to 0. So when any of the current users (8021q, macvlan, mac80211) calls dev_mc_sync/unsync they mess the address list for both devices. The attached patch fixed it for me and avoid future problems. Signed-off-by: NJorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2008 7 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matheos Worku 提交于
BMAC port alternate MAC address index needs to start at 1. Index 0 is used for the main MAC address. Signed-off-by: NMatheos Worku <matheos.worku@sun.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Add missing structure kernel-doc descriptions to sock.h & skbuff.h to fix kernel-doc warnings. (I think that Stephen H. sent a similar patch, but I can't find it. I just want to kill the warnings, with either patch.) Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
The result of the ip_route_output is not assigned to skb. This means that - it is leaked - possible OOPS below dereferrencing skb->dst - no ICMP message for this case Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Young 提交于
hci conn child devices other than rfcomm tty should not be moved here. This is my lost, thanks for Barnaby's reporting and testing. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Young 提交于
Move hci_dev_put to del_conn to avoid hci dev going away before hci conn. Signed-off-by: NDave Young <hidave.darkstar@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-