Pull m68knommu fix from Greg Ungerer:
 "A single fix for compilation breakage to many of the ColdFire CPU
  targets"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: only use local gpio_request_one if not using GPIOLIB

Pull drm fixes from Dave Airlie:
 "Regression fixers for the big 3:

   - nouveau: hdmi audio, dac load detect, s/r regressions fixed
   - radeon: long standing system hang fixed, hdmi audio and rs780 fast
     fb fixes
   - intel: one old regression, a WARN removal, and a stop X dying fix

  Otherwise one mgag200 fix, a couple of arm build fixes, and a core use
  after free fix."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nv50/kms: use dac loadval from vbios, where it's available
  drm/nv50/disp: force dac power state during load detect
  drm/nv50-nv84/fifo: fix resume regression introduced by playlist race fix
  drm/nv84/disp: Fix HDMI audio regression
  drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC.
  drm/radeon: don't allow audio on DCE6
  drm/radeon: Use direct mapping for fast fb access on RS780/RS880 (v2)
  radeon: Fix system hang issue when using KMS with older cards
  drm/i915: no lvds quirk for hp t5740
  drm/i915: Quirk the pipe A quirk in the modeset state checker
  drm/i915: Fix spurious -EIO/SIGBUS on wedged gpus
  drm/mgag200: Add missing write to index before accessing data register
  drm/nouveau: use mdelay instead of large udelay constants
  drm/tilcd: select BACKLIGHT_LCD_SUPPORT
  drm: fix a use-after-free when GPU acceleration disabled

Pull slave-dmaengine fixes from Vinod Koul:
 "Fix from Andy is for dmatest regression reported by Will and Rabin has
  fixed runtime ref counting for st_dma40"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmatest: do not allow to interrupt ongoing tests
  dmaengine: ste_dma40: fix pm runtime ref counting

Merge tag 'trace-fixes-v3.10-rc3-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This contains 4 fixes.

  The first two fix the case where full RCU debugging is enabled,
  enabling function tracing causes a live lock of the system.  This is
  due to the added debug checks in rcu_dereference_raw() that is used by
  the function tracer.  These checks are also traced by the function
  tracer as well as cause enough overhead to the function tracer to slow
  down the system enough that the time to finish an interrupt can take
  longer than when the next interrupt is triggered, causing a live lock
  from the timer interrupt.

  Talking this over with Paul McKenney, we came up with a fix that adds
  a new rcu_dereference_raw_notrace() that does not perform these added
  checks, and let the function tracer use that.

  The third commit fixes a failed compile when branch tracing is
  enabled, due to the conversion of the trace_test_buffer() selftest
  that the branch trace wasn't converted for.

  The forth patch fixes a bug caught by the RCU lockdep code where a
  rcu_read_lock() is performed when rcu is disabled (either going to or
  from idle, or user space).  This happened on the irqsoff tracer as it
  calls task_uid().  The fix here was to use current_uid() when possible
  that doesn't use rcu locking.  Which luckily, is always used when
  irqsoff calls this code."

* tag 'trace-fixes-v3.10-rc3-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Use current_uid() for critical time tracing
  tracing: Fix bad parameter passed in branch selftest
  ftrace: Use the rcu _notrace variants for rcu_dereference_raw() and friends
  rcu: Add _notrace variation of rcu_dereference_raw() and hlist_for_each_entry_rcu()

Commit 9f29ab11 ("ACPI / scan: do not match drivers against objects
having scan handlers") introduced a boot regression on Tony's ia64 HP
rx2600.  Tony says:

  "It panics with the message:

   Kernel panic - not syncing: Unable to find SBA IOMMU: Try a generic or DIG kernel

   [...] my problem comes from arch/ia64/hp/common/sba_iommu.c
   where the code in sba_init() says:

        acpi_bus_register_driver(&acpi_sba_ioc_driver);
        if (!ioc_list) {

   but because of this change we never managed to call ioc_init()
   so ioc_list doesn't get set up, and we die."

Revert it to avoid this breakage and we'll fix the problem it attempted
to address later.
Reported-by: NTony Luck <tony.luck@gmail.com>
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull infiniband fixes from Roland Dreier:
 - qib RCU/lockdep fix
 - iser device removal fix, plus doc fixes

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/qib: Fix lockdep splat in qib_alloc_lkey()
  MAINTAINERS: Add entry for iSCSI Extensions for RDMA (iSER) initiator
  IB/iser: Add Mellanox copyright
  IB/iser: Fix device removal flow

Pull vfio fix from Alex Williamson:
 "fix rmmod crash"

* tag 'vfio-v3.10-rc5' of git://github.com/awilliam/linux-vfio:
  vfio: fix crash on rmmod

Merge tag 'ecryptfs-3.10-rc5-msync' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull ecryptfs fixes from Tyler Hicks:
 - Fixes how eCryptfs handles msync to sync both the upper and lower
   file
 - A couple of MAINTAINERS updates

* tag 'ecryptfs-3.10-rc5-msync' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: Check return of filemap_write_and_wait during fsync
  Update eCryptFS maintainers
  ecryptfs: fixed msync to flush data

Pull CIFS fix from Steve French:
 "Fix one byte buffer overrun with prefixpaths on cifs mounts which can
  cause a problem with mount depending on the string length"

* 'for-3.10' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix off-by-one bug in build_unc_path_to_root

When user interrupts ongoing transfers the dmatest may end up with console
lockup, oops, or data mismatch. This patch prevents user to abort any ongoing
test.

Documentation is updated accordingly.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Pull sound fixes from Takashi Iwai:
 - A pile of small regression fix patches for HD-audio VIA codecs
 - Quirks for HD-aduio and USB-audio devices
 - A trivial SIS7019 error path fix

* tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270
  ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface
  ALSA: hda/via - Clean up duplicated codes
  ALSA: hda/via - Fix wrongly cleared pins after suspend on VT1802
  ALSA: hda - Add keep_eapd_on flag to generic parser
  ALSA: hda - Allow setting automute/automic hooks after parsing
  ALSA: hda/via - Disable broken dynamic power control
  ALSA: usb-audio: fix Roland/Cakewalk UM-3G support
  ALSA: hda - Add headset quirk for two Dell machines
  ALSA: hda - add dock support for Thinkpad T431s
  ALSA: sis7019: fix error return code in sis_chip_create()

Pull power management and ACPI fixes from Rafael J Wysocki:

 - Fix for an ACPI PM regression causing Toshiba P870-303 to crash
   during boot from Rafael J Wysocki.

 - ACPI fix for an issue causing some drivers to attempt to bind to
   devices they shouldn't touch from Aaron Lu.

 - Fix for a recent cpufreq regression related to a possible race with
   CPU offline from Michael Wang.

 - ACPI cpufreq regression fix for an issue causing turbo frequencies to
   be underutilized in some cases from Ross Lagerwall.

 - cpufreq-cpu0 driver fix related to incorrect clock ACPI usage from
   Guennadi Liakhovetski.

 - HP WMI driver fix for an issue causing GPS initialization and
   poweroff failures on HP Elitebook 6930p from Lan Tianyu.

 - APEI (ACPI Platform Error Interface) fix for an issue in the error
   code path in ghes_probe() from Wei Yongjun.

 - New ACPI video driver blacklist entries for HP m4 and HP Pavilion g6
   from Alex Hung and Ash Willis.

* tag 'pm+acpi-3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization
  cpufreq: cpufreq-cpu0: use the exact frequency for clk_set_rate()
  cpufreq: protect 'policy->cpus' from offlining during __gov_queue_work()
  ACPI / scan: do not match drivers against objects having scan handlers
  ACPI / APEI: fix error return code in ghes_probe()
  acpi-cpufreq: set current frequency based on target P-State
  ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6
  ACPI / video: ignore BIOS initial backlight value for HP m4
  x86 / platform / hp_wmi: Fix bluetooth_rfkill misuse in hp_wmi_rfkill_setup()

* pm-fixes:
  cpufreq: cpufreq-cpu0: use the exact frequency for clk_set_rate()
  cpufreq: protect 'policy->cpus' from offlining during __gov_queue_work()
  acpi-cpufreq: set current frequency based on target P-State

* acpi-fixes:
  ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization
  ACPI / scan: do not match drivers against objects having scan handlers
  ACPI / APEI: fix error return code in ghes_probe()
  ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6
  ACPI / video: ignore BIOS initial backlight value for HP m4
  x86 / platform / hp_wmi: Fix bluetooth_rfkill misuse in hp_wmi_rfkill_setup()

Commit b3785492 (ACPI / PM: Do not power manage devices in unknown
initial states) added code to force devices without _PSC, but having
_PS0 defined in the ACPI namespace, into ACPI power state D0 by
executing _PS0 for them.  That turned out to break Toshiba P870-303,
however, so revert that code.

References: https://bugzilla.kernel.org/show_bug.cgi?id=58201Reported-and-tested-by: NJerome Cantenot <jerome.cantenot@gmail.com>
Tracked-down-by: NLan Tianyu <tianyu.lan@intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull networking fix from David Miller:
 "This is a quick one commit pull request to cure the regression
  introduced by the MSG_CMSG_COMPAT change."

(Background: commit 1be374a0 completely broke 32-bit COMPAT handling
by not only disallowing MSG_CMSG_COMPAT from user APIs, but clearing it
in our own internal use too!)

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: Unbreak compat_sys_{send,recv}msg

Pull staging driver fixes from Greg Kroah-Hartman:
 "Here are some staging and IIO driver fixes for the 3.10-rc5 release.

  All of them are tiny, and fix a number of reported issues (build and
  runtime)"
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

* tag 'staging-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio:inkern: Fix typo/bug in convert raw to processed.
  iio: frequency: ad4350: Fix bug / typo in mask
  inkern: iio_device_put after incorrect return/goto
  staging: alarm-dev: information leak in alarm_compat_ioctl()
  iio:callback buffer: free the scan_mask
  staging: alarm-dev: information leak in alarm_ioctl()
  drivers: staging: zcache: fix compile error
  staging: dwc2: fix value of dma_mask

Pull tty/serial driver fixes from Greg Kroah-Hartman:
 "Here are some small bugfixes, and one revert, of serial driver issues
  that have been reported"

* tag 'tty-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: 8250: Make SERIAL_8250_RUNTIME_UARTS work correctly"
  serial: samsung: enable clock before clearing pending interrupts during init
  serial/imx: disable hardware flow control at startup

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of USB bugfixes and new device ids for the 3.10-rc5
  tree.

  Nothing major here, a number of new device ids (and movement from the
  option to the zte_ev driver of a number of ids that we had previously
  gotten wrong, some xhci bugfixes, some usb-serial driver fixes that
  were recently found, some host controller fixes / reverts, and a
  variety of smaller other things"

* tag 'usb-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (29 commits)
  USB: option,zte_ev: move most ZTE CDMA devices to zte_ev
  USB: option: blacklist network interface on Huawei E1820
  USB: whiteheat: fix broken port configuration
  USB: serial: fix TIOCMIWAIT return value
  USB: mos7720: fix hardware flow control
  USB: keyspan: remove unused endpoint-array access
  USB: keyspan: fix bogus array index
  USB: zte_ev: fix broken open
  USB: serial: Add Option GTM681W to qcserial device table.
  USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device
  USB: EHCI: fix regression related to qh_refresh()
  usbfs: Increase arbitrary limit for USB 3 isopkt length
  USB: zte_ev: fix control-message timeouts
  USB: mos7720: fix message timeouts
  USB: iuu_phoenix: fix bulk-message timeout
  USB: ark3116: fix control-message timeout
  USB: mos7840: fix DMA to stack
  USB: mos7720: fix DMA to stack
  USB: visor: fix initialisation of Treo/Kyocera devices
  USB: serial: fix Treo/Kyocera interrrupt-in urb context
  ...

Pull PCI fixes from Bjorn Helgaas:
 "This fixes a crash when booting a 32-bit kernel via the EFI boot stub.

  PCI ROM from EFI
      x86/PCI: Map PCI setup data with ioremap() so it can be in highmem"

* tag 'pci-v3.10-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  x86/PCI: Map PCI setup data with ioremap() so it can be in highmem

Pull more xfs updates from Ben Myers:
 "Here are several fixes for filesystems with CRC support turned on:
  fixes for quota, remote attributes, and recovery.  There is also some
  feature work related to CRCs: the implementation of CRCs for the inode
  unlinked lists, disabling noattr2/attr2 options when appropriate, and
  bumping the maximum number of ACLs.

  I would have preferred to defer this last category of items to 3.11.
  This would require setting a feature bit for the on-disk changes, so
  there is some pressure to get these in 3.10.  I believe this
  represents the end of the CRC related queue.

   - Rework of dquot CRCs
   - Fix for remote attribute invalidation of a leaf
   - Fix ordering of transaction replay in recovery
   - Implement CRCs for inode unlinked list
   - Disable noattr2/attr2 mount options when CRCs are enabled
   - Bump the limitation of ACL entries for v5 superblocks"

* tag 'for-linus-v3.10-rc5' of git://oss.sgi.com/xfs/xfs:
  xfs: increase number of ACL entries for V5 superblocks
  xfs: disable noattr2/attr2 mount options for CRC enabled filesystems
  xfs: inode unlinked list needs to recalculate the inode CRC
  xfs: fix log recovery transaction item reordering
  xfs: fix remote attribute invalidation for a leaf
  xfs: rework dquot CRCs

I broke them in this commit:

    commit 1be374a0
    Author: Andy Lutomirski <luto@amacapital.net>
    Date:   Wed May 22 14:07:44 2013 -0700

        net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg

This patch adds __sys_sendmsg and __sys_sendmsg as common helpers that accept
MSG_CMSG_COMPAT and blocks MSG_CMSG_COMPAT at the syscall entrypoints.  It
also reverts some unnecessary checks in sys_socketcall.

Apparently I was suffering from underscore blindness the first time around.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Tested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The irqsoff tracer records the max time that interrupts are disabled.
There are hooks in the assembly code that calls back into the tracer when
interrupts are disabled or enabled.

When they are enabled, the tracer checks if the amount of time they
were disabled is larger than the previous recorded max interrupts off
time. If it is, it creates a snapshot of the currently running trace
to store where the last largest interrupts off time was held and how
it happened.

During testing, this RCU lockdep dump appeared:

[ 1257.829021] ===============================
[ 1257.829021] [ INFO: suspicious RCU usage. ]
[ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G        W
[ 1257.829021] -------------------------------
[ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle!
[ 1257.829021]
[ 1257.829021] other info that might help us debug this:
[ 1257.829021]
[ 1257.829021]
[ 1257.829021] RCU used illegally from idle CPU!
[ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0
[ 1257.829021] RCU used illegally from extended quiescent state!
[ 1257.829021] 2 locks held by trace-cmd/4831:
[ 1257.829021]  #0:  (max_trace_lock){......}, at: [<ffffffff810e2b77>] stop_critical_timing+0x1a3/0x209
[ 1257.829021]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff810dae5a>] __update_max_tr+0x88/0x1ee
[ 1257.829021]
[ 1257.829021] stack backtrace:
[ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G        W    3.10.0-rc1-test+ #171
[ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
[ 1257.829021]  0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8
[ 1257.829021]  ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003
[ 1257.829021]  ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a
[ 1257.829021] Call Trace:
[ 1257.829021]  [<ffffffff8153dd2b>] dump_stack+0x19/0x1b
[ 1257.829021]  [<ffffffff81092a00>] lockdep_rcu_suspicious+0x109/0x112
[ 1257.829021]  [<ffffffff810daebf>] __update_max_tr+0xed/0x1ee
[ 1257.829021]  [<ffffffff810dae5a>] ? __update_max_tr+0x88/0x1ee
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810dbf85>] update_max_tr_single+0x11d/0x12d
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810e2b15>] stop_critical_timing+0x141/0x209
[ 1257.829021]  [<ffffffff8109569a>] ? trace_hardirqs_on+0xd/0xf
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810e3057>] time_hardirqs_on+0x2a/0x2f
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff8109550c>] trace_hardirqs_on_caller+0x16/0x197
[ 1257.829021]  [<ffffffff8109569a>] trace_hardirqs_on+0xd/0xf
[ 1257.829021]  [<ffffffff811002b9>] user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810029b4>] do_notify_resume+0x92/0x97
[ 1257.829021]  [<ffffffff8154bdca>] int_signal+0x12/0x17

What happened was entering into the user code, the interrupts were enabled
and a max interrupts off was recorded. The trace buffer was saved along with
various information about the task: comm, pid, uid, priority, etc.

The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock()
to retrieve the data, and this happened to happen where RCU is blind (user_enter).

As only the preempt and irqs off tracers can have this happen, and they both
only have the tsk == current, if tsk == current, use current_uid() instead of
task_uid(), as current_uid() does not use RCU as only current can change its uid.

This fixes the RCU suspicious splat.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Per some ZTE Linux drivers I found for the AC2716, the following patch
moves most ZTE CDMA devices from option to zte_ev.  The blacklist stuff
that option does is not required with zte_ev, because it doesn't
implement any of the send_setup hooks which the blacklist suppressed.

I did not move the 2718 over because I could not find any ZTE Linux
drivers for that device, nor even any Windows drivers.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The mode used by Windows for the Huawei E1820 will use the
same ff/ff/ff class codes for both serial and network
functions.
Reported-by: NGraham Inggs <graham.inggs@uct.ac.za>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When configuring the port (e.g. set_termios) the port minor number
rather than the port number was used in the request (and they only
coincide for minor number 0).

Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The limit of 25 ACL entries is arbitrary, but baked into the on-disk
format.  For version 5 superblocks, increase it to the maximum nuber
of ACLs that can fit into a single xattr.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NMark Tinguely <tinuguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

(cherry picked from commit 5c87d4bc)

attr2 format is always enabled for v5 superblock filesystems, so the
mount options to enable or disable it need to be cause mount errors.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

(cherry picked from commit d3eaace8)

The inode unlinked list manipulations operate directly on the inode
buffer, and so bypass the inode CRC calculation mechanisms. Hence an
inode on the unlinked list has an invalid CRC. Fix this by
recalculating the CRC whenever we modify an unlinked list pointer in
an inode, ncluding during log recovery. This is trivial to do and
results in  unlinked list operations always leaving a consistent
inode in the buffer.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

(cherry picked from commit 0a32c26e)

There are several constraints that inode allocation and unlink
logging impose on log recovery. These all stem from the fact that
inode alloc/unlink are logged in buffers, but all other inode
changes are logged in inode items. Hence there are ordering
constraints that recovery must follow to ensure the correct result
occurs.

As it turns out, this ordering has been working mostly by chance
than good management. The existing code moves all buffers except
cancelled buffers to the head of the list, and everything else to
the tail of the list. The problem with this is that is interleaves
inode items with the buffer cancellation items, and hence whether
the inode item in an cancelled buffer gets replayed is essentially
left to chance.

Further, this ordering causes problems for log recovery when inode
CRCs are enabled. It typically replays the inode unlink buffer long before
it replays the inode core changes, and so the CRC recorded in an
unlink buffer is going to be invalid and hence any attempt to
validate the inode in the buffer is going to fail. Hence we really
need to enforce the ordering that the inode alloc/unlink code has
expected log recovery to have since inode chunk de-allocation was
introduced back in 2003...
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

(cherry picked from commit a775ad77)

When invalidating an attribute leaf block block, there might be
remote attributes that it points to. With the recent rework of the
remote attribute format, we have to make sure we calculate the
length of the attribute correctly. We aren't doing that in
xfs_attr3_leaf_inactive(), so fix it.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NMark Tinguely <tinuguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

(cherry picked from commit 59913f14)

Calculating dquot CRCs when the backing buffer is written back just
doesn't work reliably. There are several places which manipulate
dquots directly in the buffers, and they don't calculate CRCs
appropriately, nor do they always set the buffer up to calculate
CRCs appropriately.

Firstly, if we log a dquot buffer (e.g. during allocation) it gets
logged without valid CRC, and so on recovery we end up with a dquot
that is not valid.

Secondly, if we recover/repair a dquot, we don't have a verifier
attached to the buffer and hence CRCs are not calculated on the way
down to disk.

Thirdly, calculating the CRC after we've changed the contents means
that if we re-read the dquot from the buffer, we cannot verify the
contents of the dquot are valid, as the CRC is invalid.

So, to avoid all the dquot CRC errors that are being detected by the
read verifier, change to using the same model as for inodes. That
is, dquot CRCs are calculated and written to the backing buffer at
the time the dquot is flushed to the backing buffer. If we modify
the dquot directly in the backing buffer, calculate the CRC
immediately after the modification is complete. Hence the dquot in
the on-disk buffer should always have a valid CRC.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NBen Myers <bpm@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

(cherry picked from commit 6fcdc59d)

Since the introduction of preemptible mmu_gather TLB fast mode has been
broken. TLB fast mode relies on there being absolutely no concurrency;
it frees pages first and invalidates TLBs later.

However now we can get concurrency and stuff goes *bang*.

This patch removes all tlb_fast_mode() code; it was found the better
option vs trying to patch the hole by entangling tlb invalidation with
the scheduler.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Reported-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull kbuild fixes from Michal Marek:
 "There is one fix for a kbuild regression, plus three kconfig fixes for
  bugs that have alway been there, but are simple enough to be fixed in
  an -rc"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig/menu.c: fix multiple references to expressions in menu_add_prop()
  mconf: handle keys in empty dialogs
  kbuild: Don't assume dts files live in arch/*/boot/dts
  scripts/config: fix assignment of parameters for short version of --*-after options

f9a37be0 ("x86: Use PCI setup data") added support for using PCI ROM
images from setup_data.  This used phys_to_virt(), which is not valid for
highmem addresses, and can cause a crash when booting a 32-bit kernel via
the EFI boot stub.

pcibios_add_device() assumes that the physical addresses stored in
setup_data are accessible via the direct kernel mapping, and that calling
phys_to_virt() is valid.  This isn't guaranteed to be true on x86 where the
direct mapping range is much smaller than on x86-64.

Calling phys_to_virt() on a highmem address results in the following:

 BUG: unable to handle kernel paging request at 39a3c198
 IP: [<c262be0f>] pcibios_add_device+0x2f/0x90
 ...
 Call Trace:
  [<c2370c73>] pci_device_add+0xe3/0x130
  [<c274640b>] pci_scan_single_device+0x8b/0xb0
  [<c2370d08>] pci_scan_slot+0x48/0x100
  [<c2371904>] pci_scan_child_bus+0x24/0xc0
  [<c262a7b0>] pci_acpi_scan_root+0x2c0/0x490
  [<c23b7203>] acpi_pci_root_add+0x312/0x42f
  ...

The solution is to use ioremap() instead of phys_to_virt() to map the
setup data into the kernel address space.

[bhelgaas: changelog]
Tested-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@vger.kernel.org	# v3.8+

Fix regression introduced by commit 143d9d96 ("USB: serial: add
tiocmiwait subdriver operation") which made the ioctl operation return
ENODEV rather than ENOIOCTLCMD when a subdriver TIOCMIWAIT
implementation is missing.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

devtmpfs_delete_node() calls devnode() callback with mode==NULL but
vfio still tries to write there.

The patch fixes this.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

clk_set_rate() isn't supposed to accept approximate frequencies, instead
a supported frequency should be obtained from clk_round_rate() and then
used to set the clock.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Jiri Kosina <jkosina@suse.cz> and Borislav Petkov <bp@alien8.de>
reported the warning:

[   51.616759] ------------[ cut here ]------------
[   51.621460] WARNING: at arch/x86/kernel/smp.c:123 native_smp_send_reschedule+0x58/0x60()
[   51.629638] Modules linked in: ext2 vfat fat loop snd_hda_codec_hdmi usbhid snd_hda_codec_realtek coretemp kvm_intel kvm snd_hda_intel snd_hda_codec crc32_pclmul crc32c_intel ghash_clmulni_intel snd_hwdep snd_pcm aesni_intel sb_edac aes_x86_64 ehci_pci snd_page_alloc glue_helper snd_timer xhci_hcd snd iTCO_wdt iTCO_vendor_support ehci_hcd edac_core lpc_ich acpi_cpufreq lrw gf128mul ablk_helper cryptd mperf usbcore usb_common soundcore mfd_core dcdbas evdev pcspkr processor i2c_i801 button microcode
[   51.675581] CPU: 0 PID: 244 Comm: kworker/1:1 Tainted: G        W    3.10.0-rc1+ #10
[   51.683407] Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013
[   51.690901] Workqueue: events od_dbs_timer
[   51.695069]  0000000000000009 ffff88043a2f5b68 ffffffff8161441c ffff88043a2f5ba8
[   51.702602]  ffffffff8103e540 0000000000000033 0000000000000001 ffff88043d5f8000
[   51.710136]  00000000ffff0ce1 0000000000000001 ffff88044fc4fc08 ffff88043a2f5bb8
[   51.717691] Call Trace:
[   51.720191]  [<ffffffff8161441c>] dump_stack+0x19/0x1b
[   51.725396]  [<ffffffff8103e540>] warn_slowpath_common+0x70/0xa0
[   51.731473]  [<ffffffff8103e58a>] warn_slowpath_null+0x1a/0x20
[   51.737378]  [<ffffffff81025628>] native_smp_send_reschedule+0x58/0x60
[   51.744013]  [<ffffffff81072cfd>] wake_up_nohz_cpu+0x2d/0xa0
[   51.749745]  [<ffffffff8104f6bf>] add_timer_on+0x8f/0x110
[   51.755214]  [<ffffffff8105f6fe>] __queue_delayed_work+0x16e/0x1a0
[   51.761470]  [<ffffffff8105f251>] ? try_to_grab_pending+0xd1/0x1a0
[   51.767724]  [<ffffffff8105f78a>] mod_delayed_work_on+0x5a/0xa0
[   51.773719]  [<ffffffff814f6b5d>] gov_queue_work+0x4d/0xc0
[   51.779271]  [<ffffffff814f60cb>] od_dbs_timer+0xcb/0x170
[   51.784734]  [<ffffffff8105e75d>] process_one_work+0x1fd/0x540
[   51.790634]  [<ffffffff8105e6f2>] ? process_one_work+0x192/0x540
[   51.796711]  [<ffffffff8105ef22>] worker_thread+0x122/0x380
[   51.802350]  [<ffffffff8105ee00>] ? rescuer_thread+0x320/0x320
[   51.808264]  [<ffffffff8106634a>] kthread+0xea/0xf0
[   51.813200]  [<ffffffff81066260>] ? flush_kthread_worker+0x150/0x150
[   51.819644]  [<ffffffff81623d5c>] ret_from_fork+0x7c/0xb0
[   51.918165] nouveau E[     DRM] GPU lockup - switching to software fbcon
[   51.930505]  [<ffffffff81066260>] ? flush_kthread_worker+0x150/0x150
[   51.936994] ---[ end trace f419538ada83b5c5 ]---

It was caused by the policy->cpus changed during the process of
__gov_queue_work(), in other word, cpu offline happened.

Use get/put_online_cpus() to prevent the offline from happening while
__gov_queue_work() is running.

[rjw: The problem has been present since recent commit 031299b3
(cpufreq: governors: Avoid unnecessary per cpu timer interrupts)]

References: https://lkml.org/lkml/2013/6/5/88Reported-by: NBorislav Petkov <bp@alien8.de>
Reported-and-tested-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NMichael Wang <wangyun@linux.vnet.ibm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

With the introduction of ACPI scan handlers, an ACPI device object
with an ACPI scan handler attached to it must not be bound to an ACPI
driver any more.  Therefore it doesn't make sense to match those
ACPI device objects against a newly registered ACPI driver in
acpi_bus_match(), so make that function return 0 if the device
object passed to it has an ACPI scan handler attached.

This also addresses a regression related to a broken ACPI table in
the BIOS, where it has defined a _ROM method under the PCI root
bridge object.  This causes the video module to treat that object
as a display controller device (since only display devices are
supposed to have a _ROM method defined according to the ACPI spec).
As a result, the ACPI video driver binds to the PCI root bridge
object and overwrites the previously assigned driver_data field of
it, causing subsequent calls to acpi_get_pci_dev() to fail.

[rjw: Subject and changelog]
References: https://bugzilla.kernel.org/show_bug.cgi?id=58091Reported-by: NJason Cassell <bluesloth600@gmail.com>
Reported-and-bisected-by: NDmitry S. Demin <dmitryy.demin@gmail.com>
Cc: 3.9+ <stable@kernel.org>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>