Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  keys: don't need to use RCU in keyring_read() as semaphore is held

* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux:
  nfsd4: bug in read_buf

The request_key() system call and request_key_and_link() should make a
link from an existing key to the destination keyring (if supplied), not
just from a new key to the destination keyring.

This can be tested by:

	ring=`keyctl newring fred @s`
	keyctl request2 user debug:a a
	keyctl request user debug:a $ring
	keyctl list $ring

If it says:

	keyring is empty

then it didn't work.  If it shows something like:

	1 key in keyring:
	1070462727: --alswrv     0     0 user: debug:a

then it did.

request_key() system call is meant to recursively search all your keyrings for
the key you desire, and, optionally, if it doesn't exist, call out to userspace
to create one for you.

If request_key() finds or creates a key, it should, optionally, create a link
to that key from the destination keyring specified.

Therefore, if, after a successful call to request_key() with a desination
keyring specified, you see the destination keyring empty, the code didn't work
correctly.

If you see the found key in the keyring, then it did - which is what the patch
is required for.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bill Gatliff reported the following bug when using the irq_chip facility
of the pca953x driver on a PPC platform:

BUG: scheduling while atomic: insmod/1530/0x00000002

He traced it back to an i2c transaction in pca953x_irq_set_type(), which
can be called with interrupt disabled (from __setup_irq()).  As the i2c
controller can sleep while sending a message, this qualifies as a bad
idea.

This patch moves the i2c transaction to pca953x_irq_bus_sync_unlock(),
where it is actually safe to send an i2c message.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NMarc Zyngier <maz@misterjones.org>
Reported-by: NBill Gatliff <bgat@billgatliff.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Correct the file_operations struct in fdinfo entry of tid_base_stuff[].

Presently /proc/*/task/*/fdinfo contains symlinks to opened files like
/proc/*/fd/.
Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes a build failure introduced by 1d839317 ("avr32: use
generic ptrace_resume code") which had the static keyword as a leftover.

  arch/avr32/kernel/ptrace.c:32: error: static declaration of `user_enable_single_step' follows non-static declaration
  include/linux/ptrace.h:268: error: previous declaration of `user_enable_single_step' was here

References:
[1]http://kisskb.ellerman.id.au/kisskb/buildresult/2448162/Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

keyring_read() doesn't need to use rcu_dereference() to access the keyring
payload as the caller holds the key semaphore to prevent modifications
from happening whilst the data is read out.

This should solve the following warning:

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
security/keys/keyring.c:204 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by keyctl/2144:
 #0:  (&key->sem){+++++.}, at: [<ffffffff81177f7c>] keyctl_read_key+0x9c/0xcf

stack backtrace:
Pid: 2144, comm: keyctl Not tainted 2.6.34-rc2-cachefs #113
Call Trace:
 [<ffffffff8105121f>] lockdep_rcu_dereference+0xaa/0xb2
 [<ffffffff811762d5>] keyring_read+0x4d/0xe7
 [<ffffffff81177f8c>] keyctl_read_key+0xac/0xcf
 [<ffffffff811788d4>] sys_keyctl+0x75/0xb9
 [<ffffffff81001eeb>] system_call_fastpath+0x16/0x1b
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

The checks for CONFIG_MMU at this location are duplicated as all the code is
located inside a #ifndef CONFIG_MMU block. So the first conditional block will
always be included while the second never will.
Signed-off-by: NChristoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  squashfs: fix potential buffer over-run on 4K block file systems
  squashfs: add missing buffer free
  squashfs: fix warn_on when root inode is corrupted
  squashfs: fix locking bug in zlib wrapper

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: more swap extent fixes for dynamic fork offsets

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (39 commits)
  omap: delete unused bootloader tag variables
  omap: Devkit8000: Remove unused pins
  omap: Devkit8000: Change position of init calls
  omap: Devkit8000: Remove unnecessary include file
  omap: Devkit8000: Fix typo in pin name
  omap: Devkit8000: Add missing package selection
  omap: Devkit8000: Fix typo in supplies
  n8x0_defconfig: remove CONFIG_NILFS2_FS override
  omap: board-sdp-flash.c: Fix typos in debug output
  omap4: Fix McBSP4 base address
  omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y options
  omap: rx51_defconfig: Remove duplicate phonet
  omap: fix a gpmc nand problem
  AM3517: initialize i2c subsystem after mux subsystem
  omap: remove one of the define of INT_34XX_BENCH_MPU_EMUL
  omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabled
  OMAP4: Clocks: Change SPI Instance Names
  omap: Devkit8000: Fix wrong usb port on Devkit8000
  OMAP4: Fix for CONTROL register Base
  OMAP4-HSMMC: FIX for MMC5 Controller IRQ Base
  ...

Check whether the VMA has a vm_ops before calling close, just
like we check vm_ops before calling open a few dozen lines
higher up in the function.
Signed-off-by: NRik van Riel <riel@redhat.com>
Reported-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: authenc - Add EINPROGRESS check

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: Fix sparc regression in r300_scratch()
  drm: make sure vblank interrupts are disabled at DPMS time
  drm/radeon/kms/evergreen: No EnableYUV table
  drm/radeon: 9800 SE has only one quadpipe
  drm/radeon/kms: don't print error for legal crtcs.
  drm/radeon/kms/evergreen: fix LUT setup

Commit b4fe9454 ("drm/radeon: Fix
memory allocation failures in the preKMS command stream checking.")
added a regression in that it completely tossed the get_unaligned()
done by r300_scratch() which we added in commit
958a6f8c ("drm: radeon: Fix unaligned
access in r300_scratch().").

Put it back.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When we call drm_vblank_off() at DPMS off time (to wake any clients so
they don't hang) we need to make sure interrupts are actually disabled.
If drm_vblank_off() gets called before the vblank usage timer expires,
it'll prevent the timer from disabling interrupts since it also clears
the vblank_enabled flag for the pipe.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When read_buf is called to move over to the next page in the pagelist
of an NFSv4 request, it sets argp->end to essentially a random
number, certainly not an address within the page which argp->p now
points to.  So subsequent calls to READ_BUF will think there is much
more than a page of spare space (the cast to u32 ensures an unsigned
comparison) so we can expect to fall off the end of the second
page.

We never encountered thsi in testing because typically the only
operations which use more than two pages are write-like operations,
which have their own decoding logic.  Something like a getattr after a
write may cross a page boundary, but it would be very unusual for it to
cross another boundary after that.

Cc: stable@kernel.org
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

A new xfsqa test (226) with a prototype xfs_fsr change to try to
handle dynamic fork offsets better triggers an assertion failure
where the inode data fork is in btree format, yet there is room in
the inode for it to be in extent format. The two inodes look like:

before: ino 0x101 (target), num_extents 11, Max in-fork extents 6, broot size 40, fork offset 96
before: ino 0x115 (temp),  num_extents 5, Max in-fork extents 3, broot size 40, fork offset 56
after: ino 0x101 (target), num_extents 5, Max in-fork extents 6, broot size 40, fork offset 96
after: ino 0x115 (temp), num_extents 11, Max in-fork extents 3, broot size 40, fork offset 56

Basically the target inode ends up with 5 extents in btree format,
but it had space for 6 extents in extent format, so ends up
incorrect. Notably here the broot size is the same, and that is
where the kernel code is going wrong - the btree root will fit, so
it lets the swap go ahead.

The check should not allow the swap to take place if the number of
extents while in btree format is less than the number of extents
that can fit in the inode in extent format. Adding that check will
prevent this swap and corruption from occurring.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

When Steffen originally wrote the authenc async hash patch, he
correctly had EINPROGRESS checks in place so that we did not invoke
the original completion handler with it.

Unfortuantely I told him to remove it before the patch was applied.

As only MAY_BACKLOG request completion handlers are required to
handle EINPROGRESS completions, those checks are really needed.

This patch restores them.
Reported-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ipv6: Fix inet6_csk_bind_conflict()
  e100: Fix the TX workqueue race

Commit fda48a0d (tcp: bind() fix when many ports are bound)
introduced a bug on IPV6 part.
We should not call ipv6_addr_any(inet6_rcv_saddr(sk2)) but
ipv6_addr_any(inet6_rcv_saddr(sk)) because sk2 can be IPV4, while sk is
IPV6.
Reported-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Tested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Issue the discard operation *before* releasing the blocks to be reused
  ext4: Fix buffer head leaks after calls to ext4_get_inode_loc()
  ext4: Fix possible lost inode write in no journal mode

Nothing stops the workqueue being left to run in parallel with close or a
few other operations. This causes double unmaps and the like.

See kerneloops.org #1041230 for an example
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sizing the buffer based on block size is incorrect, leading
to a potential buffer over-run on 4K block size file systems
(because the metadata block size is always 8K).  This bug
doesn't seem have triggered because 4K block size file systems
are not default, and also because metadata blocks after
compression tend to be less than 4K.
Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk>

Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk>

Fix warn_on triggered by mounting a fsfuzzer corrupted file system, where
the root inode has been corrupted.
Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk>
Reported-by: NSteve Grubb <sgrubb@redhat.com>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] use max load in conservative governor
  [CPUFREQ] fix a lockdep warning

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (22 commits)
  gianfar: Fix potential oops during OF address translation
  fsl_pq_mdio: Fix kernel oops during OF address translation
  tcp: bind() fix when many ports are bound
  rdma: potential ERR_PTR dereference
  rtnetlink: potential ERR_PTR dereference
  net: ipv6 bind to device issue
  ipv6: allow to send packet after receiving ICMPv6 Too Big message with MTU field less than IPV6_MIN_MTU
  drivers/net/usb: Add new driver ipheth
  cxgb3: fix linkup issue
  X25 fix dead unaccepted sockets
  KS8851: NULL pointer dereference if list is empty
  net: 3c574_cs fix stats.tx_bytes counter
  xfrm6: ensure to use the same dev when building a bundle
  can: Fix possible NULL pointer dereference in ems_usb.c
  net: Fix an RCU warning in dev_pick_tx()
  ipv6: Fix tcp_v6_send_response transport header setting.
  bridge: add a missing ntohs()
  8139too: Fix a typo in the function name.
  mac80211: pass HT changes to driver when off channel
  mac80211: remove bogus TX agg state assignment
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Ensure we re-enable devices on resume
  x86/PCI: parse additional host bridge window resource types
  PCI: revert broken device warning
  PCI aerdrv: use correct bit defines and add 2ms delay to aer_root_reset
  x86/PCI: ignore Consumer/Producer bit in ACPI window descriptions

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  eeepc-laptop: add missing sparse_keymap_free
  eeepc-wmi: Build fix
  asus: don't modify bluetooth/wlan on boot
  dell-wmi: Fix memory leak
  eeepc-wmi: add backlight support
  eeepc-wmi: use a platform device as parent device of all sub-devices
  eeepc-wmi: add an eeepc_wmi context structure

The unpack routine fails to handle the decompress_method() returning
unrecognised decompressor (compress_name == NULL).  This results in the
routine looping eventually oopsing on an out of bounds memory access.

Note this bug is usually hidden, only triggering on trailing junk after
one or more correct compressed blocks.  The case of the compressed archive
being complete junk is (by accident?) caught by the if (state != Reset)
check because state is initialised to Start, but not updated due to the
decompressor not having been called.  Obviously if the junk is trailing a
correctly decompressed buffer, state == Reset from the previous call to
the decompressor.
Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk>
Reported-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The follow_page() function can potentially return -EFAULT so I added
checks for this.

Also I silenced an uninitialized variable warning on my version of gcc
(version 4.3.2).
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NIzik Eidus <ieidus@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a standalone version of VMware Balloon driver.  Ballooning is a
technique that allows hypervisor dynamically limit the amount of memory
available to the guest (with guest cooperation).  In the overcommit
scenario, when hypervisor set detects that it needs to shuffle some
memory, it instructs the driver to allocate certain number of pages, and
the underlying memory gets returned to the hypervisor.  Later hypervisor
may return memory to the guest by reattaching memory to the pageframes and
instructing the driver to "deflate" balloon.

We are submitting a standalone driver because KVM maintainer (Avi Kivity)
expressed opinion (rightly) that our transport does not fit well into
virtqueue paradigm and thus it does not make much sense to integrate with
virtio.

There were also some concerns whether current ballooning technique is the
right thing.  If there appears a better framework to achieve this we are
prepared to evaluate and switch to using it, but in the meantime we'd like
to get this driver upstream.

We want to get the driver accepted in distributions so that users do not
have to deal with an out-of-tree module and many distributions have
"upstream first" requirement.

The driver has been shipping for a number of years and users running on
VMware platform will have it installed as part of VMware Tools even if it
will not come from a distribution, thus there should not be additional
risk in pulling the driver into mainline.  The driver will only activate
if host is VMware so everyone else should not be affected at all.
Signed-off-by: NDmitry Torokhov <dtor@vmware.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We are seeing a large regression in database performance on recent
kernels.  The database opens a block device with O_DIRECT|O_SYNC and a
number of threads write to different regions of the file at the same time.

A simple test case is below.  I haven't defined DEVICE since getting it
wrong will destroy your data :) On an 3 disk LVM with a 64k chunk size we
see about 17MB/sec and only a few threads in IO wait:

procs  -----io---- -system-- -----cpu------
 r  b     bi    bo   in   cs us sy id wa st
 0  3      0 16170  656 2259  0  0 86 14  0
 0  2      0 16704  695 2408  0  0 92  8  0
 0  2      0 17308  744 2653  0  0 86 14  0
 0  2      0 17933  759 2777  0  0 89 10  0

Most threads are blocking in vfs_fsync_range, which has:

        mutex_lock(&mapping->host->i_mutex);
        err = fop->fsync(file, dentry, datasync);
        if (!ret)
                ret = err;
        mutex_unlock(&mapping->host->i_mutex);

commit 148f948b (vfs: Introduce new
helpers for syncing after writing to O_SYNC file or IS_SYNC inode) offers
some explanation of what is going on:

    Use these new helpers for syncing from generic VFS functions. This makes
    O_SYNC writes to block devices acquire i_mutex for syncing. If we really
    care about this, we can make block_fsync() drop the i_mutex and reacquire
    it before it returns.

Thanks Jan for such a good commit message!  As well as dropping i_mutex,
Christoph suggests we should remove the call to sync_blockdev():

> sync_blockdev is an overcomplicated alias for filemap_write_and_wait on
> the block device inode, which is exactly what we did just before calling
> into ->fsync

The patch below incorporates both suggestions. With it the testcase improves
from 17MB/s to 68M/sec:

procs  -----io---- -system-- -----cpu------
 r  b     bi    bo   in   cs us sy id wa st
 0  7      0 65536 1000 3878  0  0 70 30  0
 0 34      0 69632 1016 3921  0  1 46 53  0
 0 57      0 69632 1000 3921  0  0 55 45  0
 0 53      0 69640  754 4111  0  0 81 19  0

Testcase:

#define _GNU_SOURCE
#include <stdio.h>
#include <pthread.h>
#include <unistd.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>

#define NR_THREADS 64
#define BUFSIZE (64 * 1024)

#define DEVICE "/dev/mapper/XXXXXX"

#define ALIGN(VAL, SIZE) (((VAL)+(SIZE)-1) & ~((SIZE)-1))

static int fd;

static void *doit(void *arg)
{
	unsigned long offset = (long)arg;
	char *b, *buf;

	b = malloc(BUFSIZE + 1024);
	buf = (char *)ALIGN((unsigned long)b, 1024);
	memset(buf, 0, BUFSIZE);

	while (1)
		pwrite(fd, buf, BUFSIZE, offset);
}

int main(int argc, char *argv[])
{
	int flags = O_RDWR|O_DIRECT;
	int i;
	unsigned long offset = 0;

	if (argc > 1 && !strcmp(argv[1], "O_SYNC"))
		flags |= O_SYNC;

	fd = open(DEVICE, flags);
	if (fd == -1) {
		perror("open");
		exit(1);
	}

	for (i = 0; i < NR_THREADS-1; i++) {
		pthread_t tid;
		pthread_create(&tid, NULL, doit, (void *)offset);
		offset += BUFSIZE;
	}
	doit((void *)offset);

	return 0;
}
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NJan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a missing EXPORT_SYMBOL.

I must be the first person that wants to use this function :-)
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes the following error:

  drivers/w1/masters/omap_hdq.c: In function 'hdq_wait_for_flag':
  drivers/w1/masters/omap_hdq.c:137: error: implicit declaration of function 'schedule_timeout_uninterruptible'
  drivers/w1/masters/omap_hdq.c: In function 'hdq_write_byte':
  drivers/w1/masters/omap_hdq.c:177: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function)
  drivers/w1/masters/omap_hdq.c:177: error: (Each undeclared identifier is reported only once
  drivers/w1/masters/omap_hdq.c:177: error: for each function it appears in.)
  drivers/w1/masters/omap_hdq.c:177: error: implicit declaration of function 'schedule_timeout'
  drivers/w1/masters/omap_hdq.c: In function 'hdq_isr':
  drivers/w1/masters/omap_hdq.c:221: error: 'TASK_NORMAL' undeclared (first use in this function)
  drivers/w1/masters/omap_hdq.c: In function 'omap_hdq_break':
  drivers/w1/masters/omap_hdq.c:316: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function)
Signed-off-by: NAmit Kucheria <amit.kucheria@canonical.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If find_mergeable_anon_vma() succeeds but another thread installs
->anon_vma before we take ptl, then allocated == NULL but avc should be
freed.  Change the code to check avc != NULL to detect this case.

Also, a couple of whitespace changes to make the critical section more
visible.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the following RCU warning:

  ===================================================
  [ INFO: suspicious rcu_dereference_check() usage. ]
  ---------------------------------------------------
  security/keys/request_key.c:116 invoked rcu_dereference_check() without protection!

This was caused by doing:

	[root@andromeda ~]# keyctl newring fred @s
	539196288
	[root@andromeda ~]# keyctl request2 user a a 539196288
	request_key: Required key not available
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes 2 issues with the LZO decompressor:

- It doesn't handle the case where a block isn't compressed at all.  In
  this case, calling lzo1x_decompress_safe will fail, so we need to just
  use memcpy() instead (the upstream LZO code does something similar)

- Since commit 54291362 ("initramfs: add
  missing decompressor error check") , the decompressor return code is
  checked in the init/initramfs.c The LZO decompressor didn't return the
  expected value, causing the initramfs code to falsely believe a
  decompression error occured
Signed-off-by: NAlbin Tonnerre <albin.tonnerre@free-electrons.com>
Tested-by: Nbert schulze <spambemyguest@googlemail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a futex key happens to be located within a huge page mapped
MAP_PRIVATE, get_futex_key() can go into an infinite loop waiting for a
page->mapping that will never exist.

See https://bugzilla.redhat.com/show_bug.cgi?id=552257 for more details
about the problem.

This patch makes page->mapping a poisoned value that includes
PAGE_MAPPING_ANON mapped MAP_PRIVATE.  This is enough for futex to
continue but because of PAGE_MAPPING_ANON, the poisoned value is not
dereferenced or used by futex.  No other part of the VM should be
dereferencing the page->mapping of a hugetlbfs page as its page cache is
not on the LRU.

This patch fixes the problem with the test case described in the bugzilla.

[akpm@linux-foundation.org: mel cant spel]
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NDarren Hart <darren@dvhart.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>