Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

It isn't used for anything. Replace with an active bool.

Also make a couple of functions return void instead of int
since their return value wasn't checked anyway.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakbo Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Remove unused member.
No need to pin / unpin fb.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

After GPU lockup VRAM gart table is unpinned and thus its pointer
becomes unvalid. This patch move the unpin code to a common helper
function and set pointer to NULL so that page update code can check
if it should update GPU page table or not. That way bo still bound
to GART can be unbound (pci_unmap_page for all there page) properly
while there is no need to update the GPU page table.

V2 move the test for null gart out of the loop, small optimization
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Bail if we hit the timeout limit.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Supposedly both NUTMEG and TRAVIS should use the same
panel mode, but switching the panel mode for TRAVIS
gets things working.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41569Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Polarity needs to be set accordingly to connector status (connected
or disconnected). Set it up in hpd_init() so first hotplug works
reliably no matter what is the initial set of connector. hpd_init()
also covers resume so HPD will work correctly after resume as well.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <j.glisse@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Allow the user to override whether MSIs are enabled
or not on supported ASICs.  MSIs are disabled by default
on IGP chips as they tend not to work.  However certain
IGP chips only seem to work with MSIs enabled.

I suspect this is a chipset or bios issue, but I'm not sure
what the proper fix is.  This will at least make diagnosing
and working around the problem much easier.

See:
https://bugs.freedesktop.org/show_bug.cgi?id=37679Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some Dell laptops only seem to work with MSIs.  This
looks like a platform/bios bug.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=37679Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some HP laptops only seem to work with MSIs.  This
looks like a platform/bios bug.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=37679Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This makes it easier to add quirks for certain systems.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

We need to redefine a connector as "connected" if it matches a window
in the host preferred GUI layout.
Otherwise "smart" window managers would turn on Xorg outputs that we don't
want to be on.

This reinstates the update_layout and adds the following information to
the modesetting system.
a) Connection status <-> Equivalent to real hardware connection status
b) Preferred mode <-> Equivalent to real hardware reading EDID
c) Host window position <-> Equivalent to a real hardware scanout address
dynamic register.

It should be noted that there is no assumption here about what should be
displayed and where. Only how to access the host windows.

This also bumps minor to signal availability of the new IOCTL.

Based on code originally written by Jakob Bornecrantz
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Rather than having a quirk list just always check the EDID header
when probing.  This is the recommended behavior according to the
display team.  This avoids problems with improperly terminated
i2c lines on some boards.  This is also what the proprietary
driver does.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The function didn't work with DP, eDP, or DP bridge
connectors and thus confused users as it lead them to
believe nothing was connected or the EDID was invalid
when in fact is was, just on the aux bus rather an i2c.

It should also speed up module loading as it avoids a
bunch of extra DDC probing.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use the table version to determine which params to use.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

set up the params based on the table version number.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use table version numbers for param setup.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Leave the common code in radeon_encoders.c and move the atom
specific code to atombios_encoders.c.  This matches legacy
encoder setup and crtc setup.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The vram scratch was originally only used on some 7xx asics
to work around a hw bug.  Allocate the scratch page on all 6xx+
radeons and set the MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR to point
to it.  We shouldn't ever hit it since we limit the system
aperture to vram or vram and AGP, but better safe than sorry.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

DP MST is DP multi-stream support, part of DP 1.2.

v2: switch to a helper macro as suggested by Michel.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The existing function was getting too big and complex.
Break it down into a more manageable set of functions.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use the regular logic for other bridge chips.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Return the encoder id rather than a boolean.  This is needed
for differentiate between multiple DP bridge chips.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

radeon_driver_irq_preinstall_kms and radeon_driver_irq_uninstall_kms
hard code the loop to 6 which happens to be the current maximum
number of crtcs and hpd pins; if one day an ASIC with more crtcs
(or hpd pins) comes out, this is a trouble waiting to happen.

introduce constants for maximum CRTC count, maximum HPD pins count
and maximum HDMI blocks count (per FIXME in radeon_irq structure)
and correct the loops in radeon_driver_irq_preinstall_kms and
radeon_driver_irq_uninstall_kms

v2: take care of goofs pointed out by Alex Deucher
Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Cayman seems to be particularly sensitive to read cache returning
old data after bind/unbind to GTT. Flush read cache for GTT range
with each fences for all new hw. Should fix several rendering glitches.
Like

V2 flush whole address space
V3 also flush shader read cache

https://bugs.freedesktop.org/show_bug.cgi?id=40221
https://bugs.freedesktop.org/show_bug.cgi?id=38022
https://bugzilla.redhat.com/show_bug.cgi?id=738790Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Polarity needs to be set accordingly to connector status (connected
or disconnected). Set it up at module init so first hotplug works
reliably no matter what is the initial set of connector.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

The logic was messy and hard to follow.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This should make eDP more reliable.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

CP_COHER_CNTL2 has to be programmed manually when submitting packets
to the ring directly rather than programmed via an IB.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Move the TC flush before the texture setup to match mesa and
the ddx. Also, move the TC flush into the texture setup
function.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Since force handling rework of d0d0a225
we could end up bouncing connector status btw disconnected and unknown.
When connector status change a call to output_poll_changed happen which
in turn ask again for detect but with force set.

So set the load detect flags whenever we report the connector as
connected or unknown this avoid bouncing btw disconnected and unknown.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This will allow us to attach various properties specific to virtual
monitors in the future.

Note that we don't export an EDID property for "Virtual" connectors.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Quoth Andrew:

 - Most of MM.  Still waiting for the poweroc guys to get off their
   butts and review some threaded hugepages patches.

 - alpha

 - vfs bits

 - drivers/misc

 - a few core kerenl tweaks

 - printk() features

 - MAINTAINERS updates

 - backlight merge

 - leds merge

 - various lib/ updates

 - checkpatch updates

* akpm: (127 commits)
  epoll: fix spurious lockdep warnings
  checkpatch: add a --strict check for utf-8 in commit logs
  kernel.h/checkpatch: mark strict_strto<foo> and simple_strto<foo> as obsolete
  llist-return-whether-list-is-empty-before-adding-in-llist_add-fix
  wireless: at76c50x: follow rename pack_hex_byte to hex_byte_pack
  fat: follow rename pack_hex_byte() to hex_byte_pack()
  security: follow rename pack_hex_byte() to hex_byte_pack()
  kgdb: follow rename pack_hex_byte() to hex_byte_pack()
  lib: rename pack_hex_byte() to hex_byte_pack()
  lib/string.c: fix strim() semantics for strings that have only blanks
  lib/idr.c: fix comment for ida_get_new_above()
  lib/percpu_counter.c: enclose hotplug only variables in hotplug ifdef
  lib/bitmap.c: quiet sparse noise about address space
  lib/spinlock_debug.c: print owner on spinlock lockup
  lib/kstrtox: common code between kstrto*() and simple_strto*() functions
  drivers/leds/leds-lp5521.c: check if reset is successful
  leds: turn the blink_timer off before starting to blink
  leds: save the delay values after a successful call to blink_set()
  drivers/leds/leds-gpio.c: use gpio_get_value_cansleep() when initializing
  drivers/leds/leds-lm3530.c: add __devexit_p where needed
  ...

epoll can acquire recursively acquire ep->mtx on multiple "struct
eventpoll"s at once in the case where one epoll fd is monitoring another
epoll fd.  This is perfectly OK, since we're careful about the lock
ordering, but it causes spurious lockdep warnings.  Annotate the recursion
using mutex_lock_nested, and add a comment explaining the nesting rules
for good measure.

Recent versions of systemd are triggering this, and it can also be
demonstrated with the following trivial test program:

--------------------8<--------------------

int main(void) {
   int e1, e2;
   struct epoll_event evt = {
       .events = EPOLLIN
   };

   e1 = epoll_create1(0);
   e2 = epoll_create1(0);
   epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt);
   return 0;
}
--------------------8<--------------------
Reported-by: NPaul Bolle <pebolle@tiscali.nl>
Tested-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NNelson Elhage <nelhage@nelhage.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some find using utf-8 in commit logs inappropriate.

Some patch commit logs contain unintended utf-8 characters when doing
things like copy/pasting compilation output.

Look for the start of any commit log by skipping initial lines that look
like email headers and "From: " lines.

Stop looking for utf-8 at the first signature line.
Signed-off-by: NJoe Perches <joe@perches.com>
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mark obsolete/deprecated strict_strto<foo> and simple_strto<foo> functions
and macros as obsolete.

Update checkpatch to warn about their use.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

clarify comment

Cc: Huang Ying <ying.huang@intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no functional change.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no functional change.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>