Merge branch 'for-2635/samsung-rtc' into for-linus/samsung2

Conflicts:
	arch/arm/mach-s3c64xx/include/mach/map.h
	arch/arm/plat-samsung/Kconfig
	arch/arm/plat-samsung/Makefile

Merge branch 'for-2635/samsung-ts' into for-linus/samsung2

Merge branch 'for-2635/s5p-audio' into for-linus/samsung2

Merge branch 'for-2635/s5p-dma' into for-linus/samsung2

Conflicts:
	arch/arm/mach-s5pv210/Makefile

Merge branch 'for-2635/fb-updates1' into for-linus/samsung2

Merge branch 'for-2635/s5pv210-clock' into for-linus/samsung2

Merge branch 'for-2635/s5p6440-clock' into for-linus/samsung2

Merge branch 'for-2635/s3c6410-clock' into for-linus/samsung2

Merge branch 'for-2635/gpio2' into for-linus/samsung2

Merge branch 'for-2635/rx1950' into for-linus/samsung2

Merge branch 'for-2635/acer-n35' into for-linus/samsung2

Merge branch 'for-2635/samsung-clock' into for-linus/samsung2

Merge branch 'for-2635/samsung-hwmon' into for-linus/samsung2

Merge branch 'for-2635/samsung-dma' into for-linus/samsung2

Merge branch 'for-2635/s5p-general' into for-linus/samsung2

Merge branch 'for-2635/s3c24xx-general' into for-linus/samsung2

This patch adds GPIOlib support for S5PV210.
Signed-off-by: NPannaga Bhushan <p.bhushan@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Timer interrupts range was defined as 43-47, what overlaps with VIC0 range
(32-64). This was caused probably by a typo while the common interrupts
definition was refactored. This patch moves timer interrupt range to safe
area of 11-15 (just before uart range).

This fixes the commit 87aef30e
("ARM: S5P: Change S5P_TIMER_IRQ based to 11 for SAMSUNG S5P series.")
which meant to move these into the old (and previously reserved)
ISA space.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[ben-linux@fluff.org: update description]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add audio platform devices on the smdk by default.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Define platform devices for all audio devices found on S5P6440
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add audio platform devices on the smdk by default.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Define platform devices for all audio devices found on S5P6442
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add audio platform devices on the smdk by default.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add audio platform devices on the smdk by default.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Define platform devices for all audio devices found on S5PV210
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The pm-gpio.c code was incrementing the gpio_nr from the nr_gpios
field and the bank-bank offset inside the loop, and also in the
for() loop with a ++.

Remove the ++, as the number is already at the next GPIO, thus
ensuring that we don't skip a gpio bank by accident.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add a table for the GPIO bank sizes for each SoC
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

As part of the cleanup, remove the old macros mapping GPIO numbers
to the base of the register now we have gpiolib to manage the GPIO
mappings for us.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Update a couple of S3C24XX and S3C2412 files that are still
using the GPIO number to register mapping calls to get the
s3c_gpio_chip and use the base field from that.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Start cleaning up the numbering of GPIO banks by removing the old
bank start definitions currently being used by some of the header
files.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Increase GPIOs number for S3C244X, and make S3C_GPIO_END
point to BANKJ end, otherwise gpiolib refuses to register
BANKJ
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
[ben-linux@fluff.org: Move pm fix to new patch]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add support for the LCD display on the SMDJK2416, and correctly name the
framebuffer device.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move the S3C_FB_MAX_WIN to the platform data to avoid
having to include the registers with the platform data.

Set S3C_FB_MAX_WIN to 5, which is the maximum that any
of the current hardware can do and the cost of having
it set to this for all is minimal (at least for the
platform data case), then always leave this as the maximum
for the systems supported.

Also remove the inclusion of <mach/regs-fb.h> from
the device definition in arch/arm/plat-samsung
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the definition of the LCD clock bit, it is the TFT display
controller on bit 9, not the older STN on bit 10.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the necessary defines to get the s3c-fb device to compile for
s3c2443.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This adds the xusbxti clock to S3C64XX platform.
Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Samsung's Soc S5PV210 has three PL330 DMACs. First is dedicated for
Memory->Memory data transfer while the other two meant for data
transfer with peripherals.
Define and add latter two PL330 DMACs as platform devices on the
S5PV210 platform.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Samsung's Soc S5P6442 has two PL330 DMACs. First is dedicated for
Memory->Memory data transfer while the second is meant for data
transfer with peripherals.
Define and add the peripheral PL330 DMAC as platform device on the
S5P6442 platform.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Samsung's Soc S5P6440 has one PL330 DMAC.
Define and add the PL330 DMAC as platform device on the
S5P6440 platform.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Latest Samsung SoCs have one or more PL330 as their DMACs. This patch
implements the S3C DMA API for PL330 core driver.

The design has been kept as generic as possible while keeping effort to
add support for new SoCs to the minimum possible level.

Some of the salient features of this driver are:-
 o  Automatic scheduling of client requests onto DMAC if more than
    one DMAC can reach the peripheral. Factors, such as current load
    and number of exclusive but inactive peripherals that are
    supported by the DMAC, are used to decide suitability of a DMAC
    for a particular client.
 o  CIRCULAR buffer option is supported.
 o  The driver scales transparently with the number of DMACs and total
    peripherals in the platform, since all peripherals are added to
    the peripheral pool and DMACs to the controller pool.

For most conservative use of memory, smallest driver size and best
performance, we don't employ legacy data structures of the S3C DMA API.
That should not have any affect since those data structures are completely
invisible to the DMA clients.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>