All information necessary to initialize cpu possible and present maps
are available once early_acpi_boot_init() is complete.  Reorganize
setup_arch() and acpi init functions such that,

* CPU information is printed after LAPIC entries are parsed in
  early_acpi_boot_init().

* smp_build_cpu_map() is called by setup_arch() instead of acpi
  functions.

* smp_build_cpu_map() is called once all CPU related information is
  available before memory is initialized.

This is primarily to allow find_memory() to use cpu maps but is also a
general cleanup.  Please note that with this change, the somewhat
ad-hoc early_cpu_possible_map defined and used for NUMA configurations
is probably unnecessary.  Something to clean up another day.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NTony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64 <linux-ia64@vger.kernel.org>

If CONFIG_VIRTUAL_MEM_MAP is enabled, ia64 defines macro VMALLOC_END
as unsigned long variable vmalloc_end which is adjusted to prepare
room for vmemmap.  This becomes probnlematic if a local variables
vmalloc_end is defined in some function (not very unlikely) and
VMALLOC_END is used in the function - the function thinks its
referencing the global VMALLOC_END value but would be referencing its
own local vmalloc_end variable.

There's no reason VMALLOC_END should be a macro.  Just define it as an
unsigned long variable if CONFIG_VIRTUAL_MEM_MAP is set to avoid nasty
surprises.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NTony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64 <linux-ia64@vger.kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: fix data space leak fix
  Btrfs: remove duplicates of filemap_ helpers
  Btrfs: take i_mutex before generic_write_checks
  Btrfs: fix arguments to btrfs_wait_on_page_writeback_range
  Btrfs: fix deadlock with free space handling and user transactions
  Btrfs: fix error cases for ioctl transactions
  Btrfs: Use CONFIG_BTRFS_POSIX_ACL to enable ACL code
  Btrfs: introduce missing kfree
  Btrfs: Fix setting umask when POSIX ACLs are not enabled
  Btrfs: proper -ENOSPC handling

spi_imx_chipselect() made things that should be (and mostly are) done by
spi_imx_setupxfer.  Only setting the tx and rx functions was missing.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Otherwise the config function uses random data from the stack.  This
didn't stick out because config is called once more in the chipselect
function with correct parameters.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

spi_imx_setup() is only called by spi_setup().  The latter does the
initialization already.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can only setup the gpio pins in spi_setup time when we know the
SPI_CS_HIGH setting.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This makes the filename match the Kconfig symbol and the driver name.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's just a wrapper for <linux/fscache.h>, so remove it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When using %*s, sscanf should honor conversion specifiers immediately
following the %*s.  For example, the following code should find the
position of the end of the string "hello".

  int end;
  char buf[] = "hello    world";
  sscanf(buf, "%*s%n", &end);
  printf("%d\n", end);

Ideally, sscanf would advance the fmt and str pointers the same as it
would without the *, but the code for that is rather complicated and is
not included in the patch.
Signed-off-by: NAndy Spencer <andy753421@gmail.com>
Acked-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow users to force skipping the TXEN test at init time. Applies
to all serial ports. Intended for debugging only.

There is a blacklist for devices where we need to skip the test but the
list is not complete.  This lets users force skipping the test so we can
determine if they need to be added to the list.

Some HP machines with weird serial consoles have this problem and there
may be more.
Signed-off-by: NChuck Ebbert <cebbert@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Check whether index is within bounds before grabbing the element.

Also, since NR_PORTS is defined ARRAY_SIZE(cy_port), cy_port[NR_PORTS] is
out of bounds as well.

[akpm@linux-foundation.org: cleanup, remove (long) casts]
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

irq is declared with size NR_CARDS (4), but the loop containing this
segment runs up until NR_ISA_ADDRS (16), possibly reading from irq[i] (and
trying to use the result)

Identified by the Parfait static scanner.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert spaces to tabs and remove wrong spaces
Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com>
Cc: Scott Kilau <Scott.Kilau@digi.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add better support for omitting either the card detect or the write
protect GPIOs if the board does not support it.  Add the fields
no_wprotect and no_detect to the platform data which when set indicate the
absence of the respective GPIOs.

Note, this also fixes a minor bug where it tries to free IRQ0 if there is
no detect gpio available.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have found a couple of boards where the SDIO IRQ hardware support has
failed to work properly, and thus we should make it configurable whether
or not to be included in the driver.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes for the DMA transfer mode of the driver to try and improve the state
of the code:

- Ensure that dma_complete is set during the end of the command phase
  so that transfers do not stall awaiting the completion

- Update the DMA debugging to provide a bit more useful information
  such as how many DMA descriptors where not processed and print the
  DMA addresses in hexadecimal.

- Fix the DMA channel request code to actually request DMA for the
  S3CMCI block instead of whatever '0' signified.

- Add fallback to PIO if we cannot get the DMA channel, as many of the
  devices with this block only have a limited number of DMA channels.

- Only try and claim and free the DMA channel if we are trying to use it.

This improves the driver DMA code to the point where it can now identify a
card and read the partition table.  However the DMA can still stall when
trying to move data between the host and memory.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a selection for the data transfer mode of the s3cmci driver, allowing
for either a configuration or rumtime selection of the use of the DMA or
PIO transfer code.

The PIO only mode is 476 bytes smaller than the driver with both methods
compiled in.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The controller supports SDIO IRQ detection so add support for hardware
assisted SDIO interrupt detection for the SDIO core.  This improves the
response time for SDIO interrupts and thus the transfer rate from devices
such as the Marvel 8686.

As a note, it does seem that the controller will miss an IRQ than is held
asserted, so there are some manual checks to see if the SDIO interrupt is
active after a transfer.

Major testing on the S3C2440.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Export driver state and hardware register state via debugfs entries
created under a directory formed from dev_name() on the probed device when
CONFIG_DEBUG_FS is set.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The clear_imask() call should be used to clear the interrupt mask
register, as it may end up clearing the SDIO interrupt bit if this is
enabled.

Change all writes of zero to SDIIMSK register to use clear_imask() ready
for the SDIO updates.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move to using dev_pm_ops for suspend and resume.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move to using gpiolib to access the card detect and write protect GPIO
lines instead of using the platform speicifc s3c2410_gpio calls.

Also ensure that the card lines are claimed the same way to avoid overlap
with any other drivers.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the platform id list to match the three different versions of the
hardware block that this driver supports.

This will change the prefix of the console messages produced by this
driver to be prefixed by s3c-mci instead of the hardware block name, such
as s3c2440-mci.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace the local definition RESSIZE() with the standard resource_size()
call for getting the size of a struct resource.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In charge/uncharge/reclaim path, usage_in_excess is calculated repeatedly
and it takes res_counter's spin_lock every time.

This patch removes unnecessary calls for res_count_soft_limit_excess.
Reviewed-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch clean up/fixes for memcg's uncharge soft limit path.

Problems:
  Now, res_counter_charge()/uncharge() handles softlimit information at
  charge/uncharge and softlimit-check is done when event counter per memcg
  goes over limit. Now, event counter per memcg is updated only when
  memory usage is over soft limit. Here, considering hierarchical memcg
  management, ancesotors should be taken care of.

  Now, ancerstors(hierarchy) are handled in charge() but not in uncharge().
  This is not good.

  Prolems:
  1. memcg's event counter incremented only when softlimit hits. That's bad.
     It makes event counter hard to be reused for other purpose.

  2. At uncharge, only the lowest level rescounter is handled. This is bug.
     Because ancesotor's event counter is not incremented, children should
     take care of them.

  3. res_counter_uncharge()'s 3rd argument is NULL in most case.
     ops under res_counter->lock should be small. No "if" sentense is better.

Fixes:
  * Removed soft_limit_xx poitner and checks in charge and uncharge.
    Do-check-only-when-necessary scheme works enough well without them.

  * make event-counter of memcg incremented at every charge/uncharge.
    (per-cpu area will be accessed soon anyway)

  * All ancestors are checked at soft-limit-check. This is necessary because
    ancesotor's event counter may never be modified. Then, they should be
    checked at the same time.
Reviewed-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__css_put() doesn't check a bug as refcnt goes to minus.
I think it should be caught. This patch adds a check for it.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__mem_cgroup_largest_soft_limit_node() returns a mem_cgroup_per_zone "mz"
with incremnted mz->mem->css's refcnt.  Then, the caller of this function
has to call css_put(mz->mem->css).

But, mz can be !NULL even if "not found" i.e.  without css_get().  By
this, css->refcnt will go down to minus.

This may cause various things...one of results will be
initite-loop in css_tryget()  as this.

INFO: RCU detected CPU 0 stall (t=10000 jiffies)
sending NMI to all CPUs:
NMI backtrace for cpu 0
CPU 0:
<snip>

 <<EOE>>  <IRQ>  [<ffffffff810884bd>] trace_hardirqs_off+0xd/0x10
  [<ffffffff8102a940>] flat_send_IPI_mask+0x90/0xb0
  [<ffffffff8102a9c9>] flat_send_IPI_all+0x69/0x70
  [<ffffffff81027372>] arch_trigger_all_cpu_backtrace+0x62/0xa0
  [<ffffffff810bff8e>] __rcu_pending+0x7e/0x370
  [<ffffffff810c02c7>] rcu_check_callbacks+0x47/0x130
  [<ffffffff81063a26>] update_process_times+0x46/0x70
  [<ffffffff81085930>] tick_sched_timer+0x60/0x160
  [<ffffffff810858d0>] ? tick_sched_timer+0x0/0x160
  [<ffffffff8107a03a>] __run_hrtimer+0xba/0x150
  [<ffffffff8107a325>] hrtimer_interrupt+0xd5/0x1b0
  [<ffffffff81426dfe>] ? trace_hardirqs_off_thunk+0x3a/0x3c
  [<ffffffff8142cacd>] smp_apic_timer_interrupt+0x6d/0x9b
  [<ffffffff8100cb33>] apic_timer_interrupt+0x13/0x20
  <EOI>  [<ffffffff811317b6>] ? mem_cgroup_walk_tree+0x156/0x180
  [<ffffffff811316d3>] ? mem_cgroup_walk_tree+0x73/0x180
  [<ffffffff81131692>] ? mem_cgroup_walk_tree+0x32/0x180
  [<ffffffff81131a00>] ? mem_cgroup_get_local_stat+0x0/0x110
  [<ffffffff81131d5b>] ? mem_control_stat_show+0x14b/0x330
  [<ffffffff810a57fd>] ? cgroup_seqfile_show+0x3d/0x60

Above shows CPU0 caught in css_tryget()'s inifinite loop because
of bad refcnt.

This is a fix to set mz=NULL at the top of retry path.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NPaul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some configurations of the Timberdale FPGA has the uartlite
included.
Signed-off-by: NRichard Röjfors <richard.rojfors@mocean-labs.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch size comment is like so last millenium.  Update it to modern
times.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some manufacturers provide vendor information in non-vendor specific CIS
tuples.  For example, Broadcom uses an Extended Function tuple to provide
the MAC address on some of their network cards, as in the case of the
Nintendo Wii WLAN daughter card.

This patch allows passing whitelisted FUNCE tuples unknown to the SDIO
core to a matching SDIO driver instead of rejecting them and failing.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The page_address_in_vma() is not only used in unuse_vma().
Signed-off-by: NHuang Shijie <shijie8@gmail.com>
Acked-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Just like ip_fast_csum, the assembly snippet in csum_ipv6_magic needs a
memory clobber, as it is only passed the address of the buffer, not a
memory reference to the buffer itself.

This caused failures in Hurd's pfinetv4 when we tried to compile it with
gcc-4.3 (bogus checksums).
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: N"David S. Miller" <davem@davemloft.net>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix some build failures when using gcc-4.x for MN10300.

Firstly, __get_user() fails to build because the pointer points to a const and
__gu_val ends up being read-only:

In file included from include/linux/mempolicy.h:62,
                 from init/main.c:50:
include/linux/pagemap.h: In function 'fault_in_pages_readable':
include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output
make[1]: *** [init/main.o] Error 1

Secondly, gcc-4 doesn't allow casts of lvalues:

  UPD     include/linux/compile.h
arch/mn10300/kernel/rtc.c: In function 'calibrate_clock':
arch/mn10300/kernel/rtc.c:170: error: lvalue required as left operand of assignment
arch/mn10300/kernel/rtc.c:172: error: lvalue required as left operand of assignment
make[1]: *** [arch/mn10300/kernel/rtc.o] Error 1

These are seen with gcc 4.2.1.
Signed-off-by: NMark Salter <msalter@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Acked-by: NTomas Cech <sleep_walker@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Stanse found (again) a BKL imbalance in vt_ioctl.

It's easily triggerable by ioctl(dev_tty_fd, VT_SETACTIVATE, NULL);

Introduced by

commit d3b5cffc                                 Author: Alan Cox <alan@linux.intel.com>
Date:   Sat Sep 19 13:13:26 2009 -0700

    vt: add an activate and lock
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>