Introduced by commit 6003a93e

Fix a memory ordering problem that occurs on IA64. The "store" to q->lock_ptr
in wake_futex() can become visible before wake_up_all() clears the lock in the
futex_q.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Two smp_wmb() statements are missing in the sysv sem code: This could
cause stack corruptions.

The attached patch adds them.
Signed-Off-By: NManfred Spraul <manfred@colorfullife.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Two critical bugs were found in forcedeth 0.47:
 - TSO doesn't work.
 - pci_map_single() for the rx buffers is called with size==0.  This bug
   is critical, it causes random memory corruptions on systems with an
   iommu.

Below is a minimal fix for both bugs, for 2.6.15.

TSO will be fixed properly in the next version.  Tested on x86-64.
Signed-Off-By: NManfred Spraul <manfred@colorfullife.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[patch 3/3] s390: remove redundant and useless code in qeth

From: Frank Pavlic <pavlic@de.ibm.com>
	- remove redundant and useless code in qeth for
	  procfs operations.
	- update Revision numbers
Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com>

diffstat:
 qeth_main.c |    6 -
 qeth_mpc.c  |    2
 qeth_mpc.h  |    2
 qeth_proc.c |  250 ++++++------------------------------------------------------
 qeth_sys.c  |    4
 qeth_tso.h  |    4
 6 files changed, 38 insertions(+), 230 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 2/3] s390: minor qeth network driver fixes

From: Frank Pavlic <pavlic@de.ibm.com>
	- use netif_carrier_on/off calls to tell network stack
	  link carrier state
	- fix possible kfree on NULL
	- PDU_LEN2 is at offset 0x29 otherwise OSN chpid won't initialize
Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com>

diffstat:
 qeth_eddp.c |    3 ++-
 qeth_main.c |   17 +++++++----------
 qeth_mpc.h  |    2 +-
 3 files changed, 10 insertions(+), 12 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

[patch 1/3] s390: some minor qeth driver fixes

From: Frank Pavlic <pavlic@de.ibm.com>
	- let's have just one function for both ,input and output queue
	  to check qdio errors
	- add /proc/s390dbf/qeth_qerr entries for outbound processing
	- check removed for layer2 device in qeth_add_multicast_ipv6
	- NULL pointer dereference with bonding and VLAN device fixed
	- minimum length check for portname fixed
Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com>

diffstat:
qeth_main.c |   42 +++++++++++++++++++++---------------------
qeth_sys.c  |    6 +++---
2 files changed, 24 insertions(+), 24 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Andy,

libphy has no license tag. Something like the attached (untested!) patch
is needed. Hopefully such a change finds its way into 2.6.15.

filename: /lib/modules/2.6.15-rc5-3-ppc64/kernel/drivers/net/phy/libphy.ko
vermagic:       2.6.15-rc5-3-ppc64 SMP gcc-4.1
depends:
srcversion:     ACC921B5E82701BE1E6F603

 drivers/net/phy/phy_device.c |    4 ++++
 1 files changed, 4 insertions(+)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Add ID for Symbol LA-4123.  Reported by Tomas Novak <tap@post.cz>
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

orinoco_nortel was broken during conversion to iomem API.  Wrong PCI BAR
is used for chipset registers.  Reported by Tomas Novak <tap@post.cz>
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

It's definition is wrong (-1 means "no limit" not 999),
only the Sparc SunOS/Solaris compat code uses it, so
let's just kill it off completely from limits.h and
all referencing code.

Noticed by Ulrich Drepper.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce a Kconfig symbol SPARC that is defined on both the sparc and
sparc64 architectures.

This symbol makes some dependencies more readable.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

gem_remove_one() is called from the __devinit gem_init_one().

Therefore, gem_remove_one() mustn't be __devexit.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NLen Brown <len.brown@intel.com>

Return logic was inverted.
Going for changing the return value to not return zero as it is makes
more sense regarding the naming of the function (cpu_has_cpufreq()).

http://bugzilla.kernel.org/show_bug.cgi?id=3410Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

NFS client prevents mandatory lock, but there is a flaw on it; Locks are
possibly left if the mode is changed while locking.

This permits unlocking even if the mandatory lock bits are set.
Signed-off-by: NASANO Masahiro <masano@tnes.nec.co.jp>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently a simple

	void foo(void) { preempt_enable(); }

produces the following code on ARM:

foo:
	bic	r3, sp, #8128
	bic	r3, r3, #63
	ldr	r2, [r3, #4]
	ldr	r1, [r3, #0]
	sub	r2, r2, #1
	tst	r1, #4
	str	r2, [r3, #4]
	blne	preempt_schedule
	mov	pc, lr

The problem is that the TIF_NEED_RESCHED flag is loaded _before_ the
preemption count is stored back, hence any interrupt coming within that
3 instruction window causing TIF_NEED_RESCHED to be set won't be
seen and scheduling won't happen as it should.

Nothing currently prevents gcc from performing that reordering.  There
is already a barrier() before the decrement of the preemption count, but
another one is needed between this and the TIF_NEED_RESCHED flag test
for proper code ordering.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The problem is that when new policies are inserted, sockets do not see
the update (but all new route lookups do).

This bug is related to the SA insertion stale route issue solved
recently, and this policy visibility problem can be fixed in a similar
way.

The fix is to flush out the bundles of all policies deeper than the
policy being inserted.  Consider beginning state of "outgoing"
direction policy list:

	policy A --> policy B --> policy C --> policy D

First, realize that inserting a policy into a list only potentially
changes IPSEC routes for that direction.  Therefore we need not bother
considering the policies for other directions.  We need only consider
the existing policies in the list we are doing the inserting.

Consider new policy "B'", inserted after B.

	policy A --> policy B --> policy B' --> policy C --> policy D

Two rules:

1) If policy A or policy B matched before the insertion, they
   appear before B' and thus would still match after inserting
   B'

2) Policy C and D, now "shadowed" and after policy B', potentially
   contain stale routes because policy B' might be selected
   instead of them.

Therefore we only need flush routes assosciated with policies
appearing after a newly inserted policy, if any.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It turns out that commit f9bd170a
broke the cascade from XICS to i8259 on pSeries machines; specifically
we ended up not ever doing the EOI on the XICS for the cascade.  The
result was that interrupts from the serial ports (and presumably any
other devices using ISA interrupts) didn't get through.  This fixes
it and also simplifies the code, by doing the EOI on the XICS in the
xics_get_irq routine after reading and acking the interrupt on the
i8259.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

- CC data was swapped the wrong way around.
- Enabling CC disabled XDS and vice versa: these two should
be independent from one another.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- When ALSA or OSS are loaded, check if the other is present
Fixed hotplug notifiers cleanup on module removal
- The saa7134 DMA sound modules now have their own Kconfig entries, and
if built statically enforce exclusivity
- SND_PCM_OSS isn't necessary for the OSS driver
Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

I hope to actually change this behaviour shortly but this will help
anybody grepping code at present.
Signed-off-by: NIan McDonald <imcdnzl@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If you add more than one IPv6 address belonging to the same prefix and 
delete the address that was last added, routing table entry for that 
prefix is also deleted.
Tested on 2.6.14.4

To reproduce:
ip addr add 3ffe::1/64 dev eth0
ip addr add 3ffe::2/64 dev eth0
/* wait DAD */
sleep 1
ip addr del 3ffe::2/64 dev eth0
ip -6 route

(route to 3ffe::/64 should be gone)

In ipv6_del_addr(), if ifa == ifp, we set ifa->if_next to NULL, and later 
assign ifap = &ifa->if_next, effectively terminating the for-loop.
This prevents us from checking if there are other addresses using the same 
prefix that are valid, and thus resulting in deletion of the prefix.
This applies only if the first entry in idev->addr_list is the address to 
be deleted.
Signed-off-by: NKristian Slavov <kristian.slavov@nomadiclab.com>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In vlan_ioctl_handler() the code misses couple checks for
error return values.
Signed-off-by: NMika Kukkonen <mikukkon@iki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I found these while compiling with extra gcc warnings;
considering the indenting surely they are not intentional?
Signed-off-by: NMika Kukkonen <mikukkon@iki.fi>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When compiled-in, make sure the sound system has initialized
before these drivers do.

Reported by Adrian Bunk <bunk@stusta.de>

(The right fix would be to make the sound core use "subsys_initcall()"
and thus initialize before all normal drivers, but this is the quick
and limited safe fix for 2.6.15).
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch (as618) changes usbcore to prevent derailing the
suspend/resume sequence when a USB driver doesn't include support for
it.  This is a workaround rather than a true fix; the core needs to be
changed so that URB submissions from suspended drivers can be refused
and outstanding URBs cancelled.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When the usb-storage module forces sdev->scsi_level to SCSI_2, it should
also force starget->scsi_level to the same value.  Otherwise, the SCSI
layer may attempt to issue SCSI-3 commands to the device, such as REPORT
LUNS, which it cannot handle.  This can prevent the device from working
with Linux.

The AMS Venus DS3 DS2316SU2S SATA-to-SATA+USB enclosure, based on the
Oxford Semiconductor OXU921S chip, requires this patch to function
correctly on Linux.  The enclosure reports a SCSI-3 SPC-2 command set
level, but does not correctly handle the REPORT LUNS SCSI command -
probably due to a bug in its firmware.

It seems likely that other USB storage enclosures with similar bugs will
also benefit from this patch.

Tony Lindgren <tony@atomide.com> collaborated in the development of this
patch.
Signed-off-by: NPaul Walmsley <paul@booyaka.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Jan's crosscompile page [1] shows, that one regression in 2.6.15-rc is
that the v850 defconfig does no longer compile.

The compile error is:

<--  snip  -->

...
  CC      arch/v850/kernel/setup.o
In file included from /usr/src/ctest/rc/kernel/arch/v850/kernel/setup.c:17:
/usr/src/ctest/rc/kernel/include/linux/irq.h:13:43: asm/smp.h: No such file or directory
make[2]: *** [arch/v850/kernel/setup.o] Error 1

<--  snip  -->

The #include <asm/smp.h> in irq.h was intruduced in 2.6.15-rc.

Since include/linux/irq.h needs code from asm/smp.h only in the
CONFIG_SMP=y case and linux/smp.h #include's asm/smp.h only in the
CONFIG_SMP=y case, I'm suggesting this patch to #include <linux/smp.h>
in irq.h.

I've tested the compilation with both CONFIG_SMP=y and CONFIG_SMP=n
on i386.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>