Pull kbuild fix from Michal Marek:
 "make mrproper / distclean stopped removing the generated debian/
  directory in v3.16.  This fixes it"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Fix removal of the debian/ directory

The introduction of the uapi directories in v3.7-rc1 moved some of the
generated headers from arch/*/include/generated to the uapi directory,
keeping the #include directives intact.

This creates a problem when bisecting, because the unversioned files are
not cleaned automatically by git and the compiler might include stale
headers as a result.  Instead of cleaning them in the Makefiles, promote
arch/*/include/generated/uapi in the search path.  Under normal
circumstances, there is no overlap between this uapi subdirectory and
its parent, so the include choices remain the same.  We keep
arch/*/include/generated/uapi in the USERINCLUDE variable so that it is
usable standalone.

Note that we cannot completely swap the order of the uapi and
kernel-only directories, since the headers in include/uapi/asm-generic
are meant to be wrapped by their include/asm-generic counterparts when
building kernel code.
Reported-by: N"Nicholas A. Bellinger" <nab@linux-iscsi.org>
Reported-by: NDavid Drysdale <dmd@lurklurk.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull pinctrl fixes from Linus Walleij:
 "Allright allright I've been lazy over christmas and New Years.  Here
  are a few collected pin control fixes eventually.  Details:

  A set of assorted pin control fixes for the Rockchip and STi drivers"

* tag 'pinctrl-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: st: Add irq_disable hook to st_gpio_irqchip
  pinctrl: st: avoid multiple mutex lock
  pinctrl: rockchip: Fix enable/disable/mask/unmask
  pinctrl: rockchip: Handle wakeup pins

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are an ACPI device power management initialization fix (-stable
  material), two commits renaming stuff in the ACPI processor driver to
  make it more suitable for ARM64 processors and a new ACPI backlight
  blacklist entry.

  Specifics:

   - Fix ACPI power management intialization for device objects
     corresponding to devices that are not present at the init time (the
     _STA control method returns 0 for them) and therefore should not be
     regarded as power manageable (Rafael J Wysocki).

   - Rename a structure field and two functions used by the ACPI
     processor driver to make them less tied to architectures that use
     APICs (both x86 and ia64) and more suitable for ARM64 processors
     (Hanjun Guo).

   - Add a disable_native_backlight quirk for Dell XPS15 L521X designed
     in an unusual way preventing native backlight from working on that
     machine (Hans de Goede)"

* tag 'pm+acpi-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: Add disable_native_backlight quirk for Dell XPS15 L521X
  ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()
  ACPI / processor: Convert apic_id to phys_id to make it arch agnostic
  ACPI / PM: Fix PM initialization for devices that are not present

Pull keyrings fixes from David Howells:
 "Two fixes:

   - Fix for the order in which things are done during key garbage
     collection to prevent named keyrings causing a crash
     [CVE-2014-9529].

   - Fix assoc_array to explicitly #include rcupdate.h to prevent
     compilation errors under certain circumstances"

* tag 'keys-fixes-20150107' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  assoc_array: Include rcupdate.h for call_rcu() definition
  KEYS: close race between key lookup and freeing

pull virtio/vhost fixes from Michael Tsirkin:
 "This fixes a couple of bugs triggered by hot-unplug of virtio devices,
  as well as a regression in vhost-net"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost/net: length miscalculation
  virtio_pci: document why we defer kfree
  virtio_pci: defer kfree until release callback
  virtio_pci: device-specific release callback
  virtio: make del_vqs idempotent

Pull IOMMU fixes from Joerg Roedel:
 "Including:

   - a domain structure leak fix in the Intel VT-d driver

   - compile error fix for the VMSA IPMMU driver because of the
     IOMMU_EXEC -> IOMMU_NOEXEC conversion

   - two small cleanups as an aftermath of the merge window and the
     domain-leak fix"

* tag 'iommu-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/rockchip: Drop owner assignment from platform_drivers
  iommu/vt-d: Remove dead code in device_notifier
  iommu/vt-d: Fix dmar_domain leak in iommu_attach_device
  iommu/ipmmu-vmsa: Change IOMMU_EXEC to IOMMU_NOEXEC

Pull crypto fixes from Herbert Xu:
 "This fixes a build problem with sha-mb with old toolchains and an
  implementation bug in the ctr(aes)/by8 branch of aesni-intel that's
  enabled when AVX is available"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: sha-mb - Add avx2_supported check.
  crypto: aesni - fix "by8" variant for 128 bit keys

Include rcupdate.h header to provide call_rcu() definition. This was implicitly
being provided by slab.h file which include srcu.h somewhere in its include
hierarchy which in-turn included rcupdate.h.

Lately, tinification effort added support to remove srcu entirely because of
which we are encountering build errors like

lib/assoc_array.c: In function 'assoc_array_apply_edit':
lib/assoc_array.c:1426:2: error: implicit declaration of function 'call_rcu' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors

Fix these by including rcupdate.h explicitly.
Signed-off-by: NPranith Kumar <bobby.prani@gmail.com>
Reported-by: NScott Wood <scottwood@freescale.com>

commit 8b38694a
    vhost/net: virtio 1.0 byte swap
had this chunk:
-       heads[headcount - 1].len += datalen;
+       heads[headcount - 1].len = cpu_to_vhost32(vq, len - datalen);

This adds datalen with the wrong sign, causing guest panics.

Fixes: 8b38694aReported-by: NAlex Williamson <alex.williamson@redhat.com>
Suggested-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Currently disable_irq() doesn't work for pinctrl-st driver, due to
missing irq_disable hook in the driver.
disable_irq() is required only for level-triggered interrupts, which
is not the case normally.
Signed-off-by: NPankaj Dev <pankaj.dev@st.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Using the sysfs inteface to inspect the pins configuration
the system can walk around a path which acquires the same
mutex twice.

On STiH407 platform, for example :
cat /sys/kernel/debug/pinctrl/920f080.pin-controller-front0/pinconf-pins
hangs the kernel and never returns.

With this patch the mutex is temporary freed.
Signed-off-by: NFrancesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Pull networking fixes from David Miller:
 "Just a pile of random fixes, including:

   1) Do not apply TSO limits to non-TSO packets, fix from Herbert Xu.

   2) MDI{,X} eeprom check in e100 driver is reversed, from John W.
      Linville.

   3) Missing error return assignments in several ethernet drivers, from
      Julia Lawall.

   4) Altera TSE device doesn't come back up after ifconfig down/up
      sequence, fix from Kostya Belezko.

   5) Add more cases to the check for whether the qmi_wwan device has a
      bogus MAC address and needs to be assigned a random one.  From
      Kristian Evensen.

   6) Fix interrupt hangs in CPSW, from Felipe Balbi.

   7) Implement ndo_features_check in r8152 so that the stack doesn't
      feed GSO packets which are outside of the chip's capabilities.
      From Hayes Wang"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  qla3xxx: don't allow never end busy loop
  xen-netback: fixing the propagation of the transmit shaper timeout
  r8152: support ndo_features_check
  batman-adv: fix potential TT client + orig-node memory leak
  batman-adv: fix multicast counter when purging originators
  batman-adv: fix counter for multicast supporting nodes
  batman-adv: fix lock class for decoding hash in network-coding.c
  batman-adv: fix delayed foreign originator recognition
  batman-adv: fix and simplify condition when bonding should be used
  Revert "mac80211: Fix accounting of the tailroom-needed counter"
  net: ethernet: cpsw: fix hangs with interrupts
  enic: free all rq buffs when allocation fails
  qmi_wwan: Set random MAC on devices with buggy fw
  openvswitch: Consistently include VLAN header in flow and port stats.
  tcp: Do not apply TSO segment limit to non-TSO packets
  Altera TSE: Add missing phydev
  net/mlx4_core: Fix error flow in mlx4_init_hca()
  net/mlx4_core: Correcly update the mtt's offset in the MR re-reg flow
  qlcnic: Fix return value in qlcnic_probe()
  net: axienet: fix error return code
  ...

Pull IPMI fixlet from Corey Minyard:
 "Fix a compile warning"

* tag 'for-linus-3' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: Fix compile warning with tv_usec

The counter variable wasn't increased at all which may stuck under
certain circumstances.
Signed-off-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* acpi-pm:
  ACPI / PM: Fix PM initialization for devices that are not present

* acpi-processor:
  ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()
  ACPI / processor: Convert apic_id to phys_id to make it arch agnostic

* acpi-video:
  ACPI / video: Add disable_native_backlight quirk for Dell XPS15 L521X

The L521X variant of the Dell XPS15 has integrated nvidia graphics, and
backlight control does not work properly when using the native interfaces.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1163574Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull ext4 bugfixes from Ted Ts'o:
 "Revert a potential seek_data/hole regression which shows up when using
  ext4 to handle ext3 file systems, plus two minor bug fixes"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: remove spurious KERN_INFO from ext4_warning call
  Revert "ext4: fix suboptimal seek_{data,hole} extents traversial"
  ext4: prevent online resize with backup superblock

Jay Foad reports that the address sanitizer test (asan) sometimes gets
confused by a stack pointer that ends up being outside the stack vma
that is reported by /proc/maps.

This happens due to an interaction between RLIMIT_STACK and the guard
page: when we do the guard page check, we ignore the potential error
from the stack expansion, which effectively results in a missing guard
page, since the expected stack expansion won't have been done.

And since /proc/maps explicitly ignores the guard page (commit
d7824370: "mm: fix up some user-visible effects of the stack guard
page"), the stack pointer ends up being outside the reported stack area.

This is the minimal patch: it just propagates the error.  It also
effectively makes the guard page part of the stack limit, which in turn
measn that the actual real stack is one page less than the stack limit.

Let's see if anybody notices.  We could teach acct_stack_growth() to
allow an extra page for a grow-up/grow-down stack in the rlimit test,
but I don't want to add more complexity if it isn't needed.
Reported-and-tested-by: NJay Foad <jay.foad@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Included changes:
- ensure bonding is used (if enabled) for packets coming in the soft
  interface
- fix race condition to avoid orig_nodes to be deleted right after
  being added
- avoid false positive lockdep splats by assigning lockclass to
  the proper hashtable lock objects
- avoid miscounting of multicast 'disabled' nodes in the network
- fix memory leak in the Global Translation Table in case of
  originator interval change
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since e9ce7cb6 ("xen-netback: Factor queue-specific data into queue struct"),
the transimt shaper timeout is always set to 0.  The value the user sets via
xenbus is never propagated to the transmit shaper.

This patch fixes the issue.

Cc: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: NImre Palik <imrep@amazon.de>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2015-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Here's just a single fix - a revert of a patch that broke the
p54 and cw2100 drivers (arguably due to bad assumptions there.)
Since this affects kernels since 3.17, I decided to revert for
now and we'll revisit this optimisation properly for -next.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support ndo_features_check to avoid:
 - the transport offset is more than the hw limitation when using hw checksum.
 - the skb->len of a GSO packet is more than the limitation.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The reason we defer kfree until release function is because it's a
general rule for kobjects: kfree of the reference counter itself is only
legal in the release function.

Previous patch didn't make this clear, document this in code.

Cc: stable@vger.kernel.org
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

A struct device which has just been unregistered can live on past the
point at which a driver decides to drop it's initial reference to the
kobject gained on allocation.

This implies that when releasing a virtio device, we can't free a struct
virtio_device until the underlying struct device has been released,
which might not happen immediately on device_unregister().

Unfortunately, this is exactly what virtio pci does:
it has an empty release callback, and frees memory immediately
after unregistering the device.

This causes an easy to reproduce crash if CONFIG_DEBUG_KOBJECT_RELEASE
it enabled.

To fix, free the memory only once we know the device is gone in the release
callback.

Cc: stable@vger.kernel.org
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

It turns out we need to add device-specific code
in release callback. Move it to virtio_pci_legacy.c.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Our code calls del_vqs multiple times, assuming
it's idempotent.

commit 3ec7a77b
    virtio_pci: free up vq->priv
broke this assumption, by adding kfree there,
so multiple calls cause double free.

Fix it up.

Fixes: 3ec7a77bReported-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch fixes a potential memory leak which can occur once an
originator times out. On timeout the according global translation table
entry might not get purged correctly. Furthermore, the non purged TT
entry will cause its orig-node to leak, too. Which additionally can lead
to the new multicast optimization feature not kicking in because of a
therefore bogus counter.

In detail: The batadv_tt_global_entry->orig_list holds the reference to
the orig-node. Usually this reference is released after
BATADV_PURGE_TIMEOUT through: _batadv_purge_orig()->
batadv_purge_orig_node()->batadv_update_route()->_batadv_update_route()->
batadv_tt_global_del_orig() which purges this global tt entry and
releases the reference to the orig-node.

However, if between two batadv_purge_orig_node() calls the orig-node
timeout grew to 2*BATADV_PURGE_TIMEOUT then this call path isn't
reached. Instead the according orig-node is removed from the
originator hash in _batadv_purge_orig(), the batadv_update_route()
part is skipped and won't be reached anymore.

Fixing the issue by moving batadv_tt_global_del_orig() out of the rcu
callback.
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Acked-by: NAntonio Quartulli <antonio@meshcoding.com>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

When purging an orig_node we should only decrease counter tracking the
number of nodes without multicast optimizations support if it was
increased through this orig_node before.

A not yet quite initialized orig_node (meaning it did not have its turn
in the mcast-tvlv handler so far) which gets purged would not adhere to
this and will lead to a counter imbalance.

Fixing this by adding a check whether the orig_node is mcast-initalized
before decreasing the counter in the mcast-orig_node-purging routine.

Introduced by 60432d75
("batman-adv: Announce new capability via multicast TVLV")
Reported-by: NTobias Hachmer <tobias@hachmer.de>
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

A miscounting of nodes having multicast optimizations enabled can lead
to multicast packet loss in the following scenario:

If the first OGM a node receives from another one has no multicast
optimizations support (no multicast tvlv) then we are missing to
increase the counter. This potentially leads to the wrong assumption
that we could safely use multicast optimizations.

Fixings this by increasing the counter if the initial OGM has the
multicast TVLV unset, too.

Introduced by 60432d75
("batman-adv: Announce new capability via multicast TVLV")
Reported-by: NTobias Hachmer <tobias@hachmer.de>
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

batadv_has_set_lock_class() is called with the wrong hash table as first
argument (probably due to a copy-paste error), which leads to false
positives when running with lockdep.

Introduced-by: 612d2b4f
("batman-adv: network coding - save overheard and tx packets for decoding")
Signed-off-by: NMartin Hundebøll <martin@hundeboll.net>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Currently it can happen that the reception of an OGM from a new
originator is not being accepted. More precisely it can happen that
an originator struct gets allocated and initialized
(batadv_orig_node_new()), even the TQ gets calculated and set correctly
(batadv_iv_ogm_calc_tq()) but still the periodic orig_node purging
thread will decide to delete it if it has a chance to jump between
these two function calls.

This is because batadv_orig_node_new() initializes the last_seen value
to zero and its caller (batadv_iv_ogm_orig_get()) makes it visible to
other threads by adding it to the hash table already.
batadv_iv_ogm_calc_tq() will set the last_seen variable to the correct,
current time a few lines later but if the purging thread jumps in between
that it will think that the orig_node timed out and will wrongly
schedule it for deletion already.

If the purging interval is the same as the originator interval (which is
the default: 1 second), then this game can continue for several rounds
until the random OGM jitter added enough difference between these
two (in tests, two to about four rounds seemed common).

Fixing this by initializing the last_seen variable of an orig_node
to the current time before adding it to the hash table.
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

The current condition actually does NOT consider bonding when the
interface the packet came in from is the soft interface, which is the
opposite of what it should do (and the comment describes). Fix that and
slightly simplify the condition.
Reported-by: NRay Gibson <booray@gmail.com>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Pull powerpc fixes from Michael Ellerman:

 - Wire up sys_execveat(). Tested on 32 & 64 bit.

 - Fix for kdump on LE systems with cpus hot unplugged.

 - Revert Anton's fix for "kernel BUG at kernel/smpboot.c:134!", this
   broke other platforms, we'll do a proper fix for 3.20.

* tag 'powerpc-3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
  Revert "powerpc: Secondary CPUs must set cpu_callin_map after setting active and online"
  powerpc/kdump: Ignore failure in enabling big endian exception during crash
  powerpc: Wire up sys_execveat() syscall

acpi_map_lsapic() will allocate a logical CPU number and map it to
physical CPU id (such as APIC id) for the hot-added CPU, it will also
do some mapping for NUMA node id and etc, acpi_unmap_lsapic() will
do the reverse.

We can see that the name of the function is a little bit confusing and
arch (IA64) dependent so rename them as acpi_(un)map_cpu() to make arch
agnostic and explicit.
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

apic_id in MADT table is the CPU hardware id which identify
it self in the system for x86 and ia64, OSPM will use it for
SMP init to map APIC ID to logical cpu number in the early
boot, when the DSDT/SSDT (ACPI namespace) is scanned later, the
ACPI processor driver is probed and the driver will use acpi_id
in DSDT to get the apic_id, then map to the logical cpu number
which is needed by the processor driver.

Before ACPI 5.0, only x86 and ia64 were supported in ACPI spec,
so apic_id is used both in arch code and ACPI core which is
pretty fine. Since ACPI 5.0, ARM is supported by ACPI and
APIC is not available on ARM, this will confuse people when
apic_id is both used by x86 and ARM in one function.

So convert apic_id to phys_id (which is the original meaning)
in ACPI processor dirver to make it arch agnostic, but leave the
arch dependent code unchanged, no functional change.
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull ia64 fixlet from Tony Luck:
 "Add execveat syscall"

* tag 'please-pull-syscall' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Enable execveat syscall for ia64

If an ACPI device object whose _STA returns 0 (not present and not
functional) has _PR0 or _PS0, its power_manageable flag will be set
and acpi_bus_init_power() will return 0 for it.  Consequently, if
such a device object is passed to the ACPI device PM functions, they
will attempt to carry out the requested operation on the device,
although they should not do that for devices that are not present.

To fix that problem make acpi_bus_init_power() return an error code
for devices that are not present which will cause power_manageable to
be cleared for them as appropriate in acpi_bus_get_power_flags().
However, the lists of power resources should not be freed for the
device in that case, so modify acpi_bus_get_power_flags() to keep
those lists even if acpi_bus_init_power() returns an error.
Accordingly, when deciding whether or not the lists of power
resources need to be freed, acpi_free_power_resources_lists()
should check the power.flags.power_resources flag instead of
flags.power_manageable, so make that change too.

Furthermore, if acpi_bus_attach() sees that flags.initialized is
unset for the given device, it should reset the power management
settings of the device and re-initialize them from scratch instead
of relying on the previous settings (the device may have appeared
after being not present previously, for example), so make it use
the 'valid' flag of the D0 power state as the initial value of
flags.power_manageable for it and call acpi_bus_init_power() to
discover its current power state.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+

See commit 51f39a1f
    syscalls: implement execveat() system call
Signed-off-by: NTony Luck <tony.luck@intel.com>