- 02 10月, 2012 40 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM soc-specific updates from Olof Johansson: "Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well." Fix up trivial conflicts with the clk infrastructure changes. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits) ARM: shmobile: add new __iomem annotation for new code ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup irqchip: fill in empty Kconfig ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM soc MAINTAINERS updates from Olof Johansson: "Maintainers updates for KS8965 adding Greg Ungerer, and removing myself and Colin Cross as tegra maintainers, since Stephen Warren has been handling it on his own for several releases now." * tag 'maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ks8695: add maintainers entry MAINTAINERS: tegra: remove Olof/Colin, add device tree files MAINTAINERS: add defconfig file to TEGRA section
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull non-critical ARM soc bug fixes from Olof Johansson: "These were submitted as bug fixes before v3.6 but not considered important enough to be included in it. Some of them cross over to cleanup territory as well, and aren't strictly bugfixes." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) ARM: nomadik: remove NAND_NO_READRDY use ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe() ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata() ARM: S3C24XX: removes unnecessary semicolon ARM: S3C24xx: delete double assignment ARM: EXYNOS: fix address for EXYNOS4 MDMA1 ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name ARM: ep93xx: Move ts72xx.h out of include/mach ARM: ep93xx: use __iomem pointers for MMIO ARM: msm: Fix early debug uart mapping on some memory configs ARM: msm: io: Change the default static iomappings to be shared ARM: msm: io: Remove 7x30 iomap region from 7x00 ARM: msm: Remove call to missing FPGA init on 8660 ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const ...
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS updates from Steve French: "This patchset is the final section of the SMB2.1 support merge for cifs.ko. It also includes improvements to the cifs socket handling from Jeff, and also fixes a few cifs bug fixes. It adds SMB2 support for file and inode operations as well as moves some existing cifs code to use ops server struct of protocol specific callbacks. Most of this code is SMB2 specific. When enabled SMB2.1 does pass various functional tests including most of the connectathon test suite, For SMB2.1, Connectathon test 4 and some related tests fail due to not updating mode bits remotely (cifsacl support where mode bits are approximated with the cifs acl is not enable for smb2), and test8 (symlink) support is not completed for SMB2 yet (note that we will likely have a "Unix Extensions" eventually, at least for Samba, so in the long run posix locks won't have to be emulated when mounting Linux to Linux, but for most NAS and for Windows mounts posix lock emulation will still used for SMB2 in a similar fashion as we do for cifs). SMB2.1 dialect is supported. Although additional fixes to enable smb2 (the original smb2.02) dialect and to add various optional features of the smb3 dialect are expected to be added in the future as testing progresses, currently mounting with the "vers=2.1" is supported (in order to mount using SMB2.1 to servers like Samba 4, and Windows 7, Windows 2008R2)." * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: (82 commits) [CIFS] Fix indentation of fs/cifs/Kconfig entries [CIFS] Fix SMB2 negotiation support to select only one dialect (based on vers=) cifs: obtain file access during backup intent lookup (resend) CIFS: Fix possible freed pointer dereference in CIFS_SessSetup CIFS: Fix possible freed pointer dereference in SMB2_sess_setup CIFS: Make ops->close return void cifs: change DOS/NT/POSIX mapping of ERRnoresource cifs: remove support for deprecated "forcedirectio" and "strictcache" mount options cifs: remove support for CIFS_IOC_CHECKUMOUNT ioctl CIFS: Fix possible memory leaks in SMB2 code CIFS: Fix endian conversion of IndexNumber Trivial endian fixes MARK SMB2 support EXPERIMENTAL Update cifs version number cifs: add FL_CLOSE to fl_flags mask in cifs_read_flock cifs: Mangle string used for unc in /proc/mounts cifs: cleanups for cifs_mkdir_qinfo CIFS: Fix fast lease break after open problem CIFS: Add SMB2.1 lease break support CIFS: Fix cache coherency for read oplock case ...
-
由 Linus Torvalds 提交于
This file has turned out to be a pure write-only file that causes merge conflicts and has no actual redeeming features. There is never any reason to add stuff to this idiotic file. Either something isn't getting used, and you should just remove it, or there is no excuse for removing it in the first place. Just stop the idiocy. It has also been the excuse for just plain bad behavior ("Hey, I don't like xyz, so let's mark it for removal" followed by "Hey, look, it been in feature-removal.txt for six months now, so we should remove it"). The recent bogus setitimer() ABI change request was just the most recent example of pointless and incorrect mental masturbation involving this file, and I'm tired of the silly and pointless conflicts in the file. This removal was discussed during the recent kernel summit, and while Steven Rostedt suggested we should just enter the file itself in the feature-removal schedule (to see if anybody who edits the file actually looks at it), that's cute but non-productive. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/smap support from Ingo Molnar: "This adds support for the SMAP (Supervisor Mode Access Prevention) CPU feature on Intel CPUs: a hardware feature that prevents unintended user-space data access from kernel privileged code. It's turned on automatically when possible. This, in combination with SMEP, makes it even harder to exploit kernel bugs such as NULL pointer dereferences." Fix up trivial conflict in arch/x86/kernel/entry_64.S due to newly added includes right next to each other. * 'x86-smap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, smep, smap: Make the switching functions one-way x86, suspend: On wakeup always initialize cr4 and EFER x86-32: Start out eflags and cr4 clean x86, smap: Do not abuse the [f][x]rstor_checking() functions for user space x86-32, smap: Add STAC/CLAC instructions to 32-bit kernel entry x86, smap: Reduce the SMAP overhead for signal handling x86, smap: A page fault due to SMAP is an oops x86, smap: Turn on Supervisor Mode Access Prevention x86, smap: Add STAC and CLAC instructions to control user space access x86, uaccess: Merge prototypes for clear_user/__clear_user x86, smap: Add a header file with macros for STAC/CLAC x86, alternative: Add header guards to <asm/alternative-asm.h> x86, alternative: Use .pushsection/.popsection x86, smap: Add CR4 bit for SMAP x86-32, mm: The WP test should be done on a kernel page
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
Pull ia64 update from Tony Luck: "Usual mish-mash of ia64 fixes for next merge window" * tag 'please-pull-ia64-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] xen: Fix return value check in xencomm_vtop() [IA64] Must enable interrupts in do_notify_resume_user before calling tracehook_notify_resume() [IA64] kexec: Move the dereference below the NULL test [IA64] Fix a node distance bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
Pull m68k updates from Geert Uytterhoeven: "All pretty boring, seems like all of us had better things to do last summer..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR m68k/q40: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR m68k/amiga: Use PTR_RET rather than if(IS_ERR(...)) + PTR_ERR m68k/apollo: Remove disabled definitions in apollohw.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm由 Linus Torvalds 提交于
Pull dlm updates from David Teigland: "There are two main patches in this set, both related to the userland dlm_controld daemon. The first fixes a deadlock between dlm_controld and the dlm_send workqueue when both access configfs data simultaneously. The second reworks some code to get around a long standing, but intentional, unlock balance warning. The userland daemon no longer takes a lock that is later released from the kernel. The other commits are minor fixes and changes." * tag 'dlm-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: check the maximum size of a request from user dlm: cleanup send_to_sock routine dlm: convert add_sock routine return value type to void dlm: remove redundant variable assignments dlm: fix unlock balance warnings dlm: fix uninitialized spinlock dlm: fix deadlock between dlm_send and dlm_controld
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon updates from Guenter Roeck: "New drivers for: MCP3221, ADT7410, MAX197 Chip support added to existing drivers: LM71, LM74, MAX1110, MAX1112, MAX1113, INA220, INA230, MCP3221 Cleanup: Use devm_ functions, fixed build warnings, removed deprecated sysfs attributes, code simplifications, dropped dependencies on EXPERIMENTAL" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (64 commits) hwmon: (mcp3021) Add MCP3221 support hwmon: (mcp3021) Prepare MCP3021 driver to support other chips hwmon: (w83791d) Drop unnecessary compare statements hwmon: (lm93) Drop unnecessary compare statement hwmon: (lm70) Simplify show_name function hwmon: (adcxx) Simplify show_name function hwmon: Drop dependencies on EXPERIMENTAL hwmon: (it87) Fix Kconfig for IT87 driver hwmon: (sht15) move header to linux/platform_data/ hwmon: (asus_atk0110) Remove useless kfree hwmon: (ina2xx) Add support for INA220 and INA230 hwmon: (ina2xx) Use structure array to distinguish chip types hwmon: (max1111) Add support for MAX1110, MAX1112, and MAX1113 hwmon: (lm70) Add support for LM71 and LM74 hwmon: (Documentation) Update feature-removal-schedule.txt hwmon: (w83793) Remove legacy chassis intrusion detection sysfs attributes hwmon: (w83792d) Remove legacy chassis intrusion detection attributes hwmon: (adm9240) Remove legacy chassis intrusion detection sysfs attribute hwmon: (lm70) Allow 4wire SPI bus with LM70 hwmon: (sht15) remove multiple driver registration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB changes from Greg Kroah-Hartman: "Here is the big USB pull request for 3.7-rc1 There are lots of gadget driver changes (including copying a bunch of files into the drivers/staging/ccg/ directory so that the other gadget drivers can be fixed up properly without breaking that driver), and we remove the old obsolete ub.c driver from the tree. There are also the usual XHCI set of updates, and other various driver changes and updates. We also are trying hard to remove the old dbg() macro, but the final bits of that removal will be coming in through the networking tree before we can delete it for good. All of these patches have been in the linux-next tree. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up several annoying - but fairly mindless - conflicts due to the termios structure having moved into the tty device, and often clashing with dbg -> dev_dbg conversion. * tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits) USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc USB: uas: fix gcc warning USB: uas: fix locking USB: Fix race condition when removing host controllers USB: uas: add locking USB: uas: fix abort USB: uas: remove aborted field, replace with status bit. USB: uas: fix task management USB: uas: keep track of command urbs xhci: Intel Panther Point BEI quirk. powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support Revert "usb : Add sysfs files to control port power." USB: serial: remove vizzini driver usb: host: xhci: Fix Null pointer dereferencing with 71c731a2 for non-x86 systems Increase XHCI suspend timeout to 16ms USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq USB: sierra_ms: don't keep unused variable fsl/usb: Add support for USB controller version 2.4 USB: qcaux: add Pantech vendor class match ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging tree update from Greg Kroah-Hartman: "Here is the big staging tree update for the 3.7-rc1 merge window. There are a few patches in here that are outside of the staging area, namely HID and IIO patches, but all of them have been acked by the relevant subsystem maintainers. The IIO stuff is still coming in through this tree as it hasn't entirely moved out of the staging tree, but is almost there. Other than that, there wa a ton of work on the comedi drivers to make them more readable and the correct style. Doing that removed a lot of code, but we added a new driver to the staging tree, so we didn't end up with a net reduction this time around: 662 files changed, 51649 insertions(+), 26582 deletions(-) All of these patches have been in the linux-next tree already. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1094 commits) staging: comedi: jr3_pci: fix iomem dereference staging: comedi: drivers: use comedi_fc.h cmdtest helpers Staging: winbond: usb_free_urb(NULL) is safe Staging: winbond: checkpatch cleanup Staging: winbond: Removed undesired spaces, lines and tabs Staging: winbond: Typo corrections in comments Staging: winbond: Changed c99 comments to c89 comments staging: r8712u: Do not queue cloned skb staging: comedi: ni_mio_common: always lock in ni_ai_poll() staging: comedi: s626: add FIXME comment staging: comedi: s626: don't dereference insn->data staging: comedi: s526: fix if() check in s526_gpct_winsn() staging: comedi: s626: cleanup comments in s626_initialize() staging: comedi: s626: remove clear of kzalloc'ed data staging: comedi: s626: remove 'WDInterval' from private data staging: comedi: s626: remove 'ChargeEnabled' from private data staging: comedi: s626: remove 'IsBoardRevA' comment staging: comedi: s626: #if 0 out the "SAA7146 BUG WORKAROUND" staging: comedi: s626: remove 'allocatedBuf' from private data staging: comedi: s626: add final attach message ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver core merge from Greg Kroah-Hartman: "Here is the big driver core update for 3.7-rc1. A number of firmware_class.c updates (as you saw a month or so ago), and some hyper-v updates and some printk fixes as well. All patches that are outside of the drivers/base area have been acked by the respective maintainers, and have all been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits) memory: tegra{20,30}-mc: Fix reading incorrect register in mc_readl() device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emit memory: emif: Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit] Documentation: Fixes some translation error in Documentation/zh_CN/gpio.txt Documentation: Remove 3 byte redundant code at the head of the Documentation/zh_CN/arm/booting Documentation: Chinese translation of Documentation/video4linux/omap3isp.txt device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emit dev: Add dev_vprintk_emit and dev_printk_emit netdev_printk/netif_printk: Remove a superfluous logging colon netdev_printk/dynamic_netdev_dbg: Directly call printk_emit dev_dbg/dynamic_debug: Update to use printk_emit, optimize stack driver-core: Shut up dev_dbg_reatelimited() without DEBUG tools/hv: Parse /etc/os-release tools/hv: Check for read/write errors tools/hv: Fix exit() error code tools/hv: Fix file handle leak Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO Tools: hv: Rename the function kvp_get_ip_address() Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO Tools: hv: Add an example script to configure an interface ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver merge from Greg Kroah-Hartman: "Here is the "big" char/misc driver tree update for the 3.7-rc1 merge window. Nothing major, just a number of driver updates and fixes, all of which have been in the linux-next releases for a while now either in my tree, or in Andrew's (the lis3l driver changes came from his tree last week). Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'char-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (52 commits) drivers/misc/lis3lv02d/lis3lv02d_i2c.c: add lis3lv02d device tree init drivers/misc/lis3lv02d/lis3lv02d_spi.c: add lis3lv02d device tree init drivers/misc/lis3lv02d: remove lis3lv02d driver DT init drivers/misc/lis3lv02d/lis3lv02d_spi.c: add DT matching table passthru code drivers/misc/lis3lv02d: add generic DT matching code lis3lv02d: fix some comments specific to lis331dlh driver MISC: hpilo, remove pci_disable_device pcmcia: synclink_cs: fix potential tty NULL dereference drivers/char/mmtimer.c: Remove useless kfree drivers/char: removes unnecessary semicolon char/misc: remove CONFIG_EXPERIMENTAL dependencies mei: don't print buffer as a string mei: struct mei_message_data doesn't have to be packed mei: add error messages for open count errors misc: use module_spi_driver tifm: use module_pci_driver misc/at25, dt: Improve at25 SPI eeprom device tree bindings. mei: add lynx point pci device ids mei: fix max number of open handles mei: rename struct pci_dev *mei_device to mei_pdev ...
-
git://git.linaro.org/people/mturquette/linux由 Linus Torvalds 提交于
Pull clk framework update from Michael Turquette: "The common clk framework changes for 3.7 are dominated by ARM platform ports to the framework along with one MIPS port, one MFD port, one minor framework enhancement and one helper function for platforms expressing their clock data through device tree." * tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: add of_clk_src_onecell_get() support clk: ux500: Define smp_twd clock for u8500 mfd: dbx500: Provide a more accurate smp_twd clock clk: ux500: Support for prmcu_rate clock clk: Provide option for clk_get_rate to issue hw for new rate clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator. ARM: ux500: Switch to use common clock framework clk: ux500: Clock definitions for u8500 clk: ux500: First version of clock definitions for ux500 clk: ux500: Adapt PRCMU and PRCC clocks for common clk clk: versatile: make config option boolean clk: add Loongson1B clock support arm: mmp: make all SOCs use common clock by default clk: mmp: add clock definition for mmp2 clk: mmp: add clock definition for pxa910 clk: mmp: add clock definition for pxa168 clk: mmp: add mmp specific clocks clk: convert ARM RealView to common clk clk: prima2: move from arch/arm/mach to drivers/clk ARM: PRIMA2: convert to common clk and finish full clk tree
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi) - Clear host bridge resource info to avoid issue when releasing (Yinghai Lu) - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu) - Use standard list ops for acpi_pci_drivers (Jiang Liu) Device hotplug - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang Liu) - Remove fakephp driver (Bjorn Helgaas) - Fix VGA ref count in hotplug remove path (Yinghai Lu) - Allow acpiphp to handle PCIe ports without native hotplug (Jiang Liu) - Implement resume regardless of pciehp_force param (Oliver Neukum) - Make pci_fixup_irqs() work after init (Thierry Reding) Miscellaneous - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang) - Factor out PCI Express Capability accessors (Jiang Liu) - Add pcibios_window_alignment() so powerpc EEH can use generic resource assignment (Gavin Shan) - Make pci_error_handlers const (Stephen Hemminger) - Cleanup drivers/pci/remove.c (Bjorn Helgaas) - Improve Vendor-Specific Extended Capability support (Bjorn Helgaas) - Use standard list ops for bus->devices (Bjorn Helgaas) - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang) - Reassign invalid bus number ranges (Intel DP43BF workaround) (Yinghai Lu)" * tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits) PCI: acpiphp: Handle PCIe ports without native hotplug capability PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots PCI/ACPI: Protect acpi_pci_roots list with mutex PCI/ACPI: Use acpi_pci_root info rather than looking it up again PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface PCI/ACPI: Protect acpi_pci_drivers list with mutex PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges PCI/ACPI: Use normal list for struct acpi_pci_driver PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots PCI: Fix default vga ref_count ia64/PCI: Clear host bridge aperture struct resource x86/PCI: Clear host bridge aperture struct resource PCI: Stop all children first, before removing all children Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()" PCI: Provide a default pcibios_update_irq() PCI: Discard __init annotations for pci_fixup_irqs() and related functions PCI: Use correct type when freeing bus resource list PCI: Check P2P bridge for invalid secondary/subordinate range PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64由 Linus Torvalds 提交于
Pull arm64 support from Catalin Marinas: "Linux support for the 64-bit ARM architecture (AArch64) Features currently supported: - 39-bit address space for user and kernel (each) - 4KB and 64KB page configurations - Compat (32-bit) user applications (ARMv7, EABI only) - Flattened Device Tree (mandated for all AArch64 platforms) - ARM generic timers" * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (35 commits) arm64: ptrace: remove obsolete ptrace request numbers from user headers arm64: Do not set the SMP/nAMP processor bit arm64: MAINTAINERS update arm64: Build infrastructure arm64: Miscellaneous header files arm64: Generic timers support arm64: Loadable modules arm64: Miscellaneous library functions arm64: Performance counters support arm64: Add support for /proc/sys/debug/exception-trace arm64: Debugging support arm64: Floating point and SIMD arm64: 32-bit (compat) applications support arm64: User access library functions arm64: Signal handling support arm64: VDSO support arm64: System calls handling arm64: ELF definitions arm64: SMP support arm64: DMA mapping API ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 updates from Martin Schwidefsky: "The main new feature is machine support for System zEC12 including transactional memory, runtime instrumentation, support for scm block devices via eadm subchannels, and support for CEX4 crypto cards. In addition there are some nice improvements: bpf jit compiler, arch backend for cmpxchg_double, relative exception table entries, dasd partition detection independent from the dasd driver ioctls, and cpu cache information in /proc/cpuinfo and /sys/device/cpu. And last but not least a series of cleanup patches from Heiko." Fix up trivial add-add conflict in arch/s390/Kconfig due to commit b952741c ("cputime: Generalize CONFIG_VIRT_CPU_ACCOUNTING") * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (76 commits) s390: update defconfig s390/jump label,nss: let shared kernel support depend on !JUMP_LABEL s390/disassembler: fix decoding of risblg instruction s390/bpf,jit: add support for BPF_S_ANC_ALU_XOR_X instruction s390/traps: move call to print_modules() out of show_regs() s390/mm: mark free_initrd_mem() as __init s390/dasd: check count address during online setting drivers/s390/char/monreader.c: fix error return code s390/cmpxchg,percpu: implement cmpxchg_double() s390/percpu: implement this_cpu_add_return() s390/percpu: implement this_cpu_xchg() s390/kexec: remove CONFIG_KEXEC s390/irq: use designated initializers for irq class array s390: add uninitialized_var() to suppress false positive compiler warnings s390/crashdump: move fill_cpu_elf_notes() prototype to header file s390/process: add missing header include s390/ptrace: add missing ifdef s390/ipl,decrompressor: disable branch profiling s390/perf_events: compile only for CONFIG_64BIT s390/tape: remove even more tape block leftovers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/microcode changes from Ingo Molnar: "The biggest changes are to AMD microcode patching: add code for caching all microcode patches which belong to the current family on which we're running, in the kernel. We look up the patch needed for each core from the cache at patch-application time instead of holding a single patch per-system" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, AMD: Fix use after free in free_cache() x86, microcode, AMD: Rewrite patch application procedure x86, microcode, AMD: Add a small, per-family patches cache x86, microcode, AMD: Add reverse equiv table search x86, microcode: Add a refresh firmware flag to ->request_microcode_fw x86, microcode, AMD: Read CPUID(1).EAX on the correct cpu x86, microcode, AMD: Check before applying a patch x86, microcode, AMD: Remove useless get_ucode_data wrapper x86, microcode: Straighten out Kconfig text x86, microcode: Cleanup cpu hotplug notifier callback x86, microcode: Drop uci->mc check on resume path x86, microcode: Save an indentation level in reload_for_cpu
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/platform changes from Ingo Molnar: "This cleans up some Xen-induced pagetable init code uglies, by generalizing new platform callbacks and state: x86_init.paging.*" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Document x86_init.paging.pagetable_init() x86: xen: Cleanup and remove x86_init.paging.pagetable_setup_done() x86: Move paging_init() call to x86_init.paging.pagetable_init() x86: Rename pagetable_setup_start() to pagetable_init() x86: Remove base argument from x86_init.paging.pagetable_setup_start
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/mm changes from Ingo Molnar: "The biggest change is new TLB partial flushing code for AMD CPUs. (The v3.6 kernel had the Intel CPU side code, see commits e0ba94f1..effee4b9.) There's also various other refinements around the TLB flush code" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Distinguish TLB shootdown interrupts from other functions call interrupts x86/mm: Fix range check in tlbflush debugfs interface x86, cpu: Preset default tlb_flushall_shift on AMD x86, cpu: Add AMD TLB size detection x86, cpu: Push TLB detection CPUID check down x86, cpu: Fixup tlb_flushall_shift formatting
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/MCE update from Ingo Molnar: "Various MCE robustness enhancements. One of the changes adds CMCI (Corrected Machine Check Interrupt) poll mode on Intel Nehalem+ CPUs, which mode is automatically entered when the rate of messages is too high - and exited once the storm is over. An MCE events storm will roughly look like this: [ 5342.740616] mce: [Hardware Error]: Machine check events logged [ 5342.746501] mce: [Hardware Error]: Machine check events logged [ 5342.757971] CMCI storm detected: switching to poll mode [ 5372.674957] CMCI storm subsided: switching to interrupt mode This should make such events more survivable" * 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Provide boot argument to honour bios-set CMCI threshold x86, MCE: Remove unused defines x86, mce: Enable MCA support by default x86/mce: Add CMCI poll mode x86/mce: Make cmci_discover() quiet x86: mce: Remove the frozen cases in the hotplug code x86: mce: Split timer init x86: mce: Serialize mce injection x86: mce: Disable preemption when calling raise_local()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/fpu update from Ingo Molnar: "The biggest change is the addition of the non-lazy (eager) FPU saving support model and enabling it on CPUs with optimized xsaveopt/xrstor FPU state saving instructions. There are also various Sparse fixes" Fix up trivial add-add conflict in arch/x86/kernel/traps.c * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, kvm: fix kvm's usage of kernel_fpu_begin/end() x86, fpu: remove cpu_has_xmm check in the fx_finit() x86, fpu: make eagerfpu= boot param tri-state x86, fpu: enable eagerfpu by default for xsaveopt x86, fpu: decouple non-lazy/eager fpu restore from xsave x86, fpu: use non-lazy fpu restore for processors supporting xsave lguest, x86: handle guest TS bit for lazy/non-lazy fpu host models x86, fpu: always use kernel_fpu_begin/end() for in-kernel FPU usage x86, kvm: use kernel_fpu_begin/end() in kvm_load/put_guest_fpu() x86, fpu: remove unnecessary user_fpu_end() in save_xstate_sig() x86, fpu: drop_fpu() before restoring new state from sigframe x86, fpu: Unify signal handling code paths for x86 and x86_64 kernels x86, fpu: Consolidate inline asm routines for saving/restoring fpu state x86, signal: Cleanup ifdefs and is_ia32, is_x32
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/EFI changes from Ingo Molnar: "EFI loader robustness enhancements plus smaller fixes" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Fix the ACPI BGRT driver for images located in EFI boot services memory efi: Add a function to look up existing IO memory mappings efi: Defer freeing boot services memory until after ACPI init x86, EFI: Calculate the EFI framebuffer size instead of trusting the firmware efifb: Skip DMI checks if the bootloader knows what it's doing efi: initialize efi.runtime_version to make query_variable_info/update_capsule workable efi: Build EFI stub with EFI-appropriate options X86: Improve GOP detection in the EFI boot stub
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 debug update from Ingo Molnar: "Various small enhancements" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/debug: Dump family, model, stepping of the boot CPU x86/iommu: Use NULL instead of plain 0 for __IOMMU_INIT x86/iommu: Drop duplicate const in __IOMMU_INIT x86/fpu/xsave: Keep __user annotation in casts x86/pci/probe_roms: Add missing __iomem annotation to pci_map_biosrom() x86/signals: ia32_signal.c: add __user casts to fix sparse warnings x86/vdso: Add __user annotation to VDSO32_SYMBOL x86: Fix __user annotations in asm/sys_ia32.h
-
由 Linus Torvalds 提交于
Merge branches 'x86-cpu-for-linus' and 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/cpu and x86/cpufeature from Ingo Molnar: "One tiny cleanup, and prepare for SMAP (Supervisor Mode Access Prevention) support on x86" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove the useless branch in c_start() * 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpufeature: Add feature bit for SMAP
-
由 Steve French 提交于
make menuconfig for cifs shows multiple entries toward the end of the list with the incorrect indentation (probably a bug in Kconfig parsing of items that are dependant on the module (cifs=m instead of just CONFIG_CIFS). This patch fixes the indentation of all but the last entry (CIFS_ACL) which I don't know how to fix. It also clarifies wording in two places Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/cleanups from Ingo Molnar: "Smaller cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arch/x86: Remove unecessary semicolons x86, boot: Remove obsolete and unused constant RAMDISK
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/build changes from Ingo Molnar: "defconfig and kconfig cleanups/fixes" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Clean up Kconfig defaults x86/Kconfig: Turn off DEBUG_NX_TEST module in defconfigs x86/Kconfig: Turn off CONFIG_BLK_DEV_RAM x86/Kconfig: Disable CONFIG_CRC_T10DIF in defconfigs x86/Kconfig: Switch to ext4 in defconfigs x86/Kconfig: Update defconfigs to current results of "make savedefconfig"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/asm changes from Ingo Molnar: "The one change that stands out is the alternatives patching change that prevents us from ever patching back instructions from SMP to UP: this simplifies things and speeds up CPU hotplug. Other than that it's smaller fixes, cleanups and improvements." * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Unspaghettize do_trap() x86_64: Work around old GAS bug x86: Use REP BSF unconditionally x86: Prefer TZCNT over BFS x86/64: Adjust types of temporaries used by ffs()/fls()/fls64() x86: Drop unnecessary kernel_eflags variable on 64-bit x86/smp: Don't ever patch back to UP if we unplug cpus
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/apic changes from Ingo Molnar: "Smaller fixes and cleanups" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/api: Rename mp_register_lapic in a comment x86/irq/i8259: Fix incorrect comment x86: dt: Use linear irq domain for ioapic(s)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer changes from Ingo Molnar: "Timer enhancements, generalizations and cleanups from Tejun Heo, in preparation for workqueue facility enhancements." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timer: Implement TIMER_IRQSAFE timer: Clean up timer initializers timer: Relocate declarations of init_timer_on_stack_key() timer: Generalize timer->base flags handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler changes from Ingo Molnar: "Continued quest to clean up and enhance the cputime code by Frederic Weisbecker, in preparation for future tickless kernel features. Other than that, smallish changes." Fix up trivial conflicts due to additions next to each other in arch/{x86/}Kconfig * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) cputime: Make finegrained irqtime accounting generally available cputime: Gather time/stats accounting config options into a single menu ia64: Reuse system and user vtime accounting functions on task switch ia64: Consolidate user vtime accounting vtime: Consolidate system/idle context detection cputime: Use a proper subsystem naming for vtime related APIs sched: cpu_power: enable ARCH_POWER sched/nohz: Clean up select_nohz_load_balancer() sched: Fix load avg vs. cpu-hotplug sched: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW sched: Fix nohz_idle_balance() sched: Remove useless code in yield_to() sched: Add time unit suffix to sched sysctl knobs sched/debug: Limit sd->*_idx range on sysctl sched: Remove AFFINE_WAKEUPS feature flag s390: Remove leftover account_tick_vtime() header cputime: Consolidate vtime handling on context switch sched: Move cputime code to its own file cputime: Generalize CONFIG_VIRT_CPU_ACCOUNTING tile: Remove SD_PREFER_LOCAL leftover ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fix from Ingo Molnar: "Leftover perf/urgent fix from the v3.6 cycle" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix typo in uncore_pmu_to_box
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf update from Ingo Molnar: "Lots of changes in this cycle as well, with hundreds of commits from over 30 contributors. Most of the activity was on the tooling side. Higher level changes: - New 'perf kvm' analysis tool, from Xiao Guangrong. - New 'perf trace' system-wide tracing tool - uprobes fixes + cleanups from Oleg Nesterov. - Lots of patches to make perf build on Android out of box, from Irina Tirdea - Extend ftrace function tracing utility to be more dynamic for its users. It allows for data passing to the callback functions, as well as reading regs as if a breakpoint were to trigger at function entry. The main goal of this patch series was to allow kprobes to use ftrace as an optimized probe point when a probe is placed on an ftrace nop. With lots of help from Masami Hiramatsu, and going through lots of iterations, we finally came up with a good solution. - Add cpumask for uncore pmu, use it in 'stat', from Yan, Zheng. - Various tracing updates from Steve Rostedt - Clean up and improve 'perf sched' performance by elliminating lots of needless calls to libtraceevent. - Event group parsing support, from Jiri Olsa - UI/gtk refactorings and improvements from Namhyung Kim - Add support for non-tracepoint events in perf script python, from Feng Tang - Add --symbols to 'script', similar to the one in 'report', from Feng Tang. Infrastructure enhancements and fixes: - Convert the trace builtins to use the growing evsel/evlist tracepoint infrastructure, removing several open coded constructs like switch like series of strcmp to dispatch events, etc. Basically what had already been showcased in 'perf sched'. - Add evsel constructor for tracepoints, that uses libtraceevent just to parse the /format events file, use it in a new 'perf test' to make sure the libtraceevent format parsing regressions can be more readily caught. - Some strange errors were happening in some builds, but not on the next, reported by several people, problem was some parser related files, generated during the build, didn't had proper make deps, fix from Eric Sandeen. - Introduce struct and cache information about the environment where a perf.data file was captured, from Namhyung Kim. - Fix handling of unresolved samples when --symbols is used in 'report', from Feng Tang. - Add union member access support to 'probe', from Hyeoncheol Lee. - Fixups to die() removal, from Namhyung Kim. - Render fixes for the TUI, from Namhyung Kim. - Don't enable annotation in non symbolic view, from Namhyung Kim. - Fix pipe mode in 'report', from Namhyung Kim. - Move related stats code from stat to util/, will be used by the 'stat' kvm tool, from Xiao Guangrong. - Remove die()/exit() calls from several tools. - Resolve vdso callchains, from Jiri Olsa - Don't pass const char pointers to basename, so that we can unconditionally use libgen.h and thus avoid ifdef BIONIC lines, from David Ahern - Refactor hist formatting so that it can be reused with the GTK browser, From Namhyung Kim - Fix build for another rbtree.c change, from Adrian Hunter. - Make 'perf diff' command work with evsel hists, from Jiri Olsa. - Use the only field_sep var that is set up: symbol_conf.field_sep, fix from Jiri Olsa. - .gitignore compiled python binaries, from Namhyung Kim. - Get rid of die() in more libtraceevent places, from Namhyung Kim. - Rename libtraceevent 'private' struct member to 'priv' so that it works in C++, from Steven Rostedt - Remove lots of exit()/die() calls from tools so that the main perf exit routine can take place, from David Ahern - Fix x86 build on x86-64, from David Ahern. - {int,str,rb}list fixes from Suzuki K Poulose - perf.data header fixes from Namhyung Kim - Allow user to indicate objdump path, needed in cross environments, from Maciek Borzecki - Fix hardware cache event name generation, fix from Jiri Olsa - Add round trip test for sw, hw and cache event names, catching the problem Jiri fixed, after Jiri's patch, the test passes successfully. - Clean target should do clean for lib/traceevent too, fix from David Ahern - Check the right variable for allocation failure, fix from Namhyung Kim - Set up evsel->tp_format regardless of evsel->name being set already, fix from Namhyung Kim - Oprofile fixes from Robert Richter. - Remove perf_event_attr needless version inflation, from Jiri Olsa - Introduce libtraceevent strerror like error reporting facility, from Namhyung Kim - Add pmu mappings to perf.data header and use event names from cmd line, from Robert Richter - Fix include order for bison/flex-generated C files, from Ben Hutchings - Build fixes and documentation corrections from David Ahern - Assorted cleanups from Robert Richter - Let O= makes handle relative paths, from Steven Rostedt - perf script python fixes, from Feng Tang. - Initial bash completion support, from Frederic Weisbecker - Allow building without libelf, from Namhyung Kim. - Support DWARF CFI based unwind to have callchains when %bp based unwinding is not possible, from Jiri Olsa. - Symbol resolution fixes, while fixing support PPC64 files with an .opt ELF section was the end goal, several fixes for code that handles all architectures and cleanups are included, from Cody Schafer. - Assorted fixes for Documentation and build in 32 bit, from Robert Richter - Cache the libtraceevent event_format associated to each evsel early, so that we avoid relookups, i.e. calling pevent_find_event repeatedly when processing tracepoint events. [ This is to reduce the surface contact with libtraceevents and make clear what is that the perf tools needs from that lib: so far parsing the common and per event fields. ] - Don't stop the build if the audit libraries are not installed, fix from Namhyung Kim. - Fix bfd.h/libbfd detection with recent binutils, from Markus Trippelsdorf. - Improve warning message when libunwind devel packages not present, from Jiri Olsa" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (282 commits) perf trace: Add aliases for some syscalls perf probe: Print an enum type variable in "enum variable-name" format when showing accessible variables perf tools: Check libaudit availability for perf-trace builtin perf hists: Add missing period_* fields when collapsing a hist entry perf trace: New tool perf evsel: Export the event_format constructor perf evsel: Introduce rawptr() method perf tools: Use perf_evsel__newtp in the event parser perf evsel: The tracepoint constructor should store sys:name perf evlist: Introduce set_filter() method perf evlist: Renane set_filters method to apply_filters perf test: Add test to check we correctly parse and match syscall open parms perf evsel: Handle endianity in intval method perf evsel: Know if byte swap is needed perf tools: Allow handling a NULL cpu_map as meaning "all cpus" perf evsel: Improve tracepoint constructor setup tools lib traceevent: Fix error path on pevent_parse_event perf test: Fix build failure trace: Move trace event enable from fs_initcall to core_initcall tracing: Add an option for disabling markers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull trivial irq core update from Ingo Molnar: "Two symbol exports for modular irq-chip drivers" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Export dummy_irq_chip genirq: Export irq_set_chip_and_handler_name()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull core locking changes from Ingo Molnar: "It includes a lockdep improvement plus a spinlock inlining Kconfig cleanup." * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking: Adjust spin lock inlining Kconfig options lockdep: Check if nested lock is actually held
-
由 Steve French 提交于
Based on whether the user (on mount command) chooses: vers=3.0 (for smb3.0 support) vers=2.1 (for smb2.1 support) or (with subsequent patch, which will allow SMB2 support) vers=2.0 (for original smb2.02 dialect support) send only one dialect at a time during negotiate (we had been sending a list). Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-