This is a fix to the device-mapper-log-bitset-fix-endian patch that
switched to ext2_* versions of the set and clear bit functions.  The
find_next_zero_bit function also has to be the ext2 one.  Otherwise the
mirror target tries to recover non-existent regions beyond the end of
device.
Signed-off-by: NStefan Bader <shbader@de.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

.. just as we already have for raid5.
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While a read-only array doesn't not really need a bitmap, we should
not remove the bitmap when switching an array to read-only because
 a/ There is no code to re-add the bitmap which switching to read-write,
 b/ There is insufficient locking - the bitmap could be accessed while it is
    being removed.

Cc: Reuben Farrelly <reuben-lkml@reub.net>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

super_1_sync only updates fields in the superblock that might have changed.

'raid_disks' and 'size' could have changed, but this information doesn't get
updated....  until this patch.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As 'array_size' is a 'sector_t', it may overflow inappropriately when shifted
10 bits.  So We should cast it to a loff_t first.

There are two places with this problem, but the second (in update_raid_disks)
isn't needed so just remove it:
  The only personality that handles ->reshape currently is raid1,
  and it doesn't change the size of the array.
  When added for raid5/6, reshape again won't change the size of the array,
  at least not straight away.
  This code might be need for reshaping 'linear' but linear->shape,
  if implemented, should probably do the i_size_write itself.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Problem caused by the fact that the code used to only pick the low 16
bits of the bytecount.  That may be how some controllers act on it (byte
count of 0 means 0x10000), but not for this particular hardware.
Signed-off-by: NJeremy Higdon <jeremy@sgi.com>
Acked-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Arjan van de Ven <arjan@infradead.org>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDave Airlie <airlied@linux.ie>

From: Adrian Bunk <bunk@stusta.de>

This patch makes some needlessly global functions static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDave Airlie <airlied@linux.ie>

Most of the 64 bit architectures will zero extend the first argument to
compat_sys_{openat,newfstatat,futimesat} which will fail if the 32 bit
syscall was passed AT_FDCWD (which is a small negative number).  Declare
the first argument to be an unsigned int which will force the correct
sign extension when the internal functions are called in each case.

Also, do some small white space cleanups in fs/compat.c.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Build break: Building PCI hotplug on PowerPC results in
a build break, due to failure to export symbols.

Reported today by Dave Jones <davej@redhat.com>:
drivers/pci/hotplug/rpaphp.ko needs unknown symbol pcibios_add_pci_devices

This patch fixes same problem in drivers/pci tree
Previous patch fixes the break in the arch/powerpc tree.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Build break: Building PCI hotplug on PowerPC results in
a build break, due to failure to export symbols.

Reported today by Dave Jones <davej@redhat.com>:
drivers/pci/hotplug/rpaphp.ko needs unknown symbol pcibios_add_pci_devices

This patch fixes the break in the arch/powerpc tree.
Next patch fixes same problem in drivers/pci tree
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NSteve French <sfrench@us.ibm.com>

Remove lots of trailing whitespace.  Nothing else.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Add info that structs, unions, enums, and typedefs are supported.

- Add doc about "private:" and "public:" tags for struct fields.

- Fix some typos.

- Remove some trailing whitespace.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update some parameter descriptions to actually match the code.
Signed-off-by: NMartin Waitz <tali@admingilde.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the syntax of some kernel-doc comments
Signed-off-by: NMartin Waitz <tali@admingilde.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

kernel-doc errored out because it could not understand the new __copy_to_user
definition.  Now we allow return types with four words.
Signed-off-by: NMartin Waitz <tali@admingilde.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some time before 2.6.15, a third DDC channel was added to i810fb.  On
systems where these ddc pins are not connected, the probe takes about 10
seconds.

Add a boot/module option for i810fb to explicitly probe for the 3rd ddc bus
if needed.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds support for the hp680 backlight, as found in the hp6xx series of
sh devices.
Signed-off-by: NAndriy Skulysh <askulysh@image.kiev.ua>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: N"Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When moving the cursor by writing to /dev/vcs*, the old cursor image is not
erased.  Fix by hiding the cursor first before moving the cursor to the new
position.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When a filesystem has been converted from 3.5.x to 3.6.x, we need an extra
check during file write to make sure we are not trying to make a 3.5.x file
> 2GB.
Signed-off-by: NChris Mason <mason@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

reiserfs: journal_transaction_should_end should increase the count of
blocks allocated so the transaction subsystem can keep new writers from
creating a transaction that is too large.
Signed-off-by: NChris Mason <mason@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

write_ordered_buffers should handle dirty non-uptodate buffers without a
BUG()
Signed-off-by: NChris Mason <mason@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In data=journal mode, reiserfs writepage needs to make sure not to trigger
transactions while being run under PF_MEMALLOC.  This patch makes sure to
redirty the page instead of forcing a transaction start in this case.

Also, calling filemap_fdata* in order to trigger io on the block device can
cause lock inversions on the page lock.  Instead, do simple batching from
flush_commit_list.
Signed-off-by: NChris Mason <mason@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The b_private field in buffer heads needs to be zero filled when the
buffers are allocated.  Thanks to Nathan Scott for finding this.  It was
causing problems on systems with both XFS and reiserfs.
Signed-off-by: NChris Mason <mason@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

After a transaction has closed but before it has finished commit, there is
a window where data=ordered mode requires invalidatepage to pin pages
instead of freeing them.  This patch fixes a race between the
invalidatepage checks and data=ordered writeback, and it also adds a check
to the reiserfs write_ordered_buffers routines to write any anonymous
buffers that were dirtied after its first writeback loop.

That bug works like this:

proc1: transaction closes and a new one starts
proc1: write_ordered_buffers starts processing data=ordered list
proc1: buffer A is cleaned and written
proc2: buffer A is dirtied by another process
proc2: File is truncated to zero, page A goes through invalidatepage
proc2: reiserfs_invalidatepage sees dirty buffer A with reiserfs
       journal head, pins it
proc1: write_ordered_buffers frees the journal head on buffer A

At this point, buffer A stays dirty forever
Signed-off-by: NChris Mason <mason@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use the generic_permission code with a proper wrapper and callback instead
of having a local copy.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This function is completely unused since the xattr permission checking
changes.  Remove it and fold __reiserfs_permission into
reiserfs_permission.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

According to http://bugzilla.kernel.org/show_bug.cgi?id=5778
fs/reiserfs/file.c is missing this check.
Signed-off-by: NDiego Calleja <diegocg@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch replaces yield and retry loop with __GFP_NOFAIL in
alloc_journal_list().
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove kmalloc() wrapper from fs/reiserfs/.  Please note that a reiserfs
/proc entry format is changed because kmalloc statistics is removed.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Updates to in-tree RCU documentation based on comments over the past few
months.
Signed-off-by: N"Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use EXPORT_SYMBOL_GPL in ioc3 shim layer.
Signed-off-by: NPatrick Gefre <pfg@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a missing return check from strnlen_user and fixes a off-by-one when
terminating the string with zero.
Signed-off-by: NDavi Arnaut <davi.arnaut@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add missing memory constraint to stcrw() inline assembly.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix modalias for ccw devices: cu_type should be in capitals as well.
Signed-off-by: NCornelia Huck <cohuck@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>