- 16 2月, 2013 40 次提交
-
-
由 Vineet Gupta 提交于
This again is for switch from singleton platform SMP API to multi-platform paradigm Platform code is not yet setup to populate the callbacks, that happens in next commit Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Vineet Gupta 提交于
All the current platforms can work with 0x8000_0000 based dma_addr_t since the Bus Bridges typically ignore the top bit (the only excpetion was Angel4 PCI-AHB bridge which we no longer care for). That way we don't need plat-specific cpu-addr to bus-addr conversion. Hooks still provided - just in case a platform has an obscure device which say needs 0 based bus address. That way <asm/dma_mapping.h> no longer needs to unconditinally include <plat/dma_addr.h> Also verfied that on Angel4 board, other peripherals (IDE-disk / EMAC) work fine with 0x8000_0000 based dma addresses. Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Vineet Gupta 提交于
For now this will suffice for all platforms, later exotic ones needs to get this from DeviceTree Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de>
-
由 Vineet Gupta 提交于
-Top level ARC makefile removes -I for platform headers -asm/irq.h no longer includes plat/irq.h -platform makefile adds -I for it's specfic platform headers -platform code to directly include it's plat/irq.h -Linker script needed plat/memmap.h for CCM info, already in .config Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Vineet Gupta 提交于
-platform API is retired and instead callbacks are used Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Vineet Gupta 提交于
The orig platform code orgnaization was singleton design pattern - only one platform (and board thereof) would build at a time. Thus any platform/board specific code (e.g. irq init, early init ...) expected by ARC common code was exported as well defined set of APIs, with only ONE instance building ever. Now with multiple-platform build requirement, that design of code no longer holds - multiple board specific calls need to build at the same time - so ARC common code can't use the API approach, it needs a callback based design where each board registers it's specific set of functions, and at runtime, depending on board detection, the callbacks are used from the registry. This commit adds all the infrastructure, where board specific callbacks are specified as a "maThine description". All the hooks are placed in right spots, no board callbacks registered yet (with MACHINE_STARt/END constructs) so the hooks will not run. Next commit will actually convert the platform to this infrastructure. Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Vineet Gupta 提交于
This is more natural and is now doable since the choice constructs are gone. Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Vineet Gupta 提交于
This mini patchseries addresses the lack of multi-platform-image support in ARC port. Older build system only supported one platform(soc) to build at a time and further only one board of that platform could be built. There was no technical reason for that - we just didn't have the need. So the first step towards multi-platform (and multi-board) builds it to allow build system to do that. So as applicable, <choice .. endchoice> => <menu .. endmenu> Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Gilad Ben-Yossef 提交于
Implement ioremap_prot() to allow mapping IO memory with variable protection via TLB. Implementing this allows the /dev/mem driver to use its generic access() VMA callback, which in turn allows ptrace to examine data in memory mapped regions mapped via /dev/mem, such as Arc DCCM. The end result is that it is possible to examine values of variables placed into DCCM in user space programs via GDB. CC: Alexey Brodkin <Alexey.Brodkin@synopsys.com> CC: Noam Camus <noamc@ezchip.com> Acked-by: NVineet Gupta <vgupta@synopsys.com> Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
1. ./genfilelist.pl arch/arc/include/asm/ 2. Create arch/arc/include/uapi/asm/Kbuild as follows +# UAPI Header export list +include include/uapi/asm-generic/Kbuild.asm 3. ./disintegrate-one.pl arch/arc/include/{,uapi/}asm/<above-list> 4. Edit arch/arc/include/asm/Kbuild to remove ref to asm-generic/Kbuild.asm - To work around empty uapi/asm/setup.h added a placholder comment. - Also a manual #ifdef __ASSEMBLY__ for a late ptrace change Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: David Howells <dhowells@redhat.com>
-
由 Vineet Gupta 提交于
This allows ARC Target to do I/O to host in absence of any peripherals whatsoever, assisted by Metaware Hostlink facility. Further we have a FUSE based filesystem which makes us mount/access host filesystem on target and do fops. Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
* Includes mapping of CCMs in address space * Annotations to move arbitrary code/data into CCM * Moving some of the critical code/data into CCM * Runtime detection/reporting Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
Although with uClibc there's more we need to do Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Mischa Jonker 提交于
Signed-off-by: NMischa Jonker <mjonker@synopsys.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Jason Wessel <jason.wessel@windriver.com> Acked-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Vineet Gupta 提交于
ARC700 doesn't natively support unaligned access, but can be emulated -Unaligned Access Exception -Disassembly at the Fault address to find the exact insn (long/short) Also per Arnd's comment, we runtime control it using 2 sysctl knobs: * SYSCTL_ARCH_UNALIGN_ALLOW: Runtime enable/disble * SYSCTL_ARCH_UNALIGN_NO_WARN: Warn on each emulation attempt Originally contributed by Tim Yao <tim.yao@amlogic.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Tim Yao <tim.yao@amlogic.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Vineet Gupta 提交于
PARISC defines /proc/sys/kernel/unaligned-trap to runtime toggle unaligned access emulation. The exact mechanics of enablig/disabling are still arch specific, we can make the sysctl usable by other arches. Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Acked-by: NHelge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com>
-
由 Vineet Gupta 提交于
Origin port done by Rajeshwar Ranga Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Rajeshwar Ranga <rajeshwar.ranga@gmail.com>
-
由 Vineet Gupta 提交于
In-kernel disassembler Due Credits * Orig written by Rajeshwar Ranga * Consolidation/cleanups by Mischa Jonker Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Rajeshwar Ranga <rajeshwar.ranga@gmail.com> Cc: Mischa Jonker <mjonker@synopsys.com>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
-Originally written by Rajeshwar Ranga -Derived off of generic unwinder in 2.6.19 and adapted to ARC Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Rajeshwar Ranga <rajeshwar.ranga@gmail.com>
-
由 Vineet Gupta 提交于
ARC common code to enable a SMP system + ISS provided SMP extensions. ARC700 natively lacks SMP support, hence some of the core features are are only enabled if SoCs have the necessary h/w pixie-dust. This includes: -Inter Processor Interrupts (IPI) -Cache coherency -load-locked/store-conditional ... The low level exception handling would be completely broken in SMP because we don't have hardware assisted stack switching. Thus a fair bit of this code is repurposing the MMU_SCRATCH reg for event handler prologues to keep them re-entrant. Many thanks to Rajeshwar Ranga for his initial "major" contributions to SMP Port (back in 2008), and to Noam Camus and Gilad Ben-Yossef for help with resurrecting that in 3.2 kernel (2012). Note that this platform code is again singleton design pattern - so multiple SMP platforms won't build at the moment - this deficiency is addressed in subsequent patches within this series. Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rajeshwar Ranga <rajeshwar.ranga@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
There is a bit of hack/kludge right now where we disable preemption if a L2 (High prio) IRQ is taken while L1 (Low prio) is active. Need to revisit this Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Robert Richter <rric@kernel.org> Cc: oprofile-list@lists.sf.net Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
With this we get to a running kernel on ISS ---------------------------------->8----------------------------------- Linux version 3.8.0-rc3+ (vineetg@vineetg-Latitude) (gcc version 4.4.7 (ARCompact elf32 toolchain (built 20121213)) ) #3 Thu Jan 17 14:22:05 IST 2013 Board "arc-angel4" from snps (Manufacturer) Memory size set via devicetree 256M [plat-arcfpga]: registering early dev resources bootconsole [early_ARCuart0] enabled pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32624 Kernel command line: console=ttyARC0,115200n8 PID hash table entries: 1024 (order: -1, 4096 bytes) Dentry cache hash table entries: 32768 (order: 4, 131072 bytes) Inode-cache hash table entries: 16384 (order: 3, 65536 bytes) Memory Available: 248M / 256M (1312K code, 463K data, 4184K init, 1400K reserv) SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:16 Console: colour dummy device 80x25 Calibrating delay loop... 39.73 BogoMIPS (lpj=198656) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 devtmpfs: initialized [plat-arcfpga]: registering device resources bio: create slab <bio-0> at 0 Switching to clocksource ARC RTSC io scheduler noop registered (default) arc-uart: ttyARC0 at MMIO 0xc0fc1000 (irq = 5) is a arc-uart console [ttyARC0] enabled, bootconsole disabled console [ttyARC0] enabled, bootconsole disabled mousedev: PS/2 mouse device common for all mice Warning: unable to open an initial console. Freeing unused kernel memory: 4184k [80002000] to [80418000] Mounting proc Mounting sysfs Mounting devpts Setting hostname to ARCLinux Starting System logger (syslogd) Bringing up loopback device ifconfig: socket: Function not implemented route: socket: Function not implemented Disk not detected ! Mounting tmpfs mount: mounting tmpfs on /dev/shm failed: Invalid argument /etc/init.d/rcS: line 76: can't create /proc/sys/kernel/msgmni: nonexistent directory Please press Enter to activate this console. *********************************************************************** Welcome to ARCLinux *********************************************************************** [ARCLinux]$ ---------------------------------->8----------------------------------- Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
This was part of port buildup strategy from Arnd to have a minimal kernel at first and then add optional features (stacktracing, ptrace, smp, kprobes, oprofile....) Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
* arc-uart platform device now populated dynamically, using of_platform_populate() - applies to any other device whatsoever. * uart in turn requires incore arc-intc to be also present in DT * A irq-domain needs to be instantiated for IRQ requests by DT probed device (e.g. arc-uart) TODO: switch over to linear irq domain once all devs have been transitioned to DT Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de>
-
由 Vineet Gupta 提交于
* mem size now runtime configured (prev CONFIG_ARC_PLAT_SDRAM_SIZE) * core cpu clk runtime configured (prev CONFIG_ARC_PLAT_CLK) Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca>
-
由 Vineet Gupta 提交于
This is minimal infrastructure needed for devicetree work. It uses an a sample "skeleton" devicetree - embedded in kernel image - to print the board, manufacturer by parsing the top-level "compatible" string. As of now we don't need any additional "board" specific "machine_desc". TODO: support interpreting the command line as boot-loader passed dtb Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: devicetree-discuss@lists.ozlabs.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: James Hogan <james.hogan@imgtec.com> Reviewed-by: NRob Herring <rob.herring@calxeda.com> Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
-
由 Vineet Gupta 提交于
N.B. This is old style of hardcoding platform device specific info in code and it's instantiation thererof using platform_add_devices(). Subsequent patches replace this with DeviceTree based runtime probe. This patch has been retained just as an example of "don't-do-this" for newer kernel ports. Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
This includes recent changes to make handler "retry" and/or "killable" The killable (early exit) logic is loosely based on how SH implements it return if SIGKILL + either of VM_FAULT_OOM or VM_FAULT_RETRY which is different from Hexagon implementation which would NOT early exit for SIGKILL + VM_FAULT_OOM + !VM_FAULT_RETRY credits: Non executable stack support from Simon Spooner Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-