I missed the CONFIG_GENERIC_PENDING_IRQ dependency in the affinity
related functions and the IRQ_LEVEL propagation into irq_data
state. Did not pop up on my main test platforms. :(
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NDavid Daney <ddaney@caviumnetworks.com>

Sigh, I'm overworked.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Fix new irq-related kernel-doc warnings in 2.6.38:

Warning(kernel/irq/manage.c:149): No description found for parameter 'mask'
Warning(kernel/irq/manage.c:149): Excess function parameter 'cpumask' description in 'irq_set_affinity'
Warning(include/linux/irq.h:161): No description found for parameter 'state_use_accessors'
Warning(include/linux/irq.h:161): Excess struct/union/enum/typedef member 'state_use_accessor' description in 'irq_data'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <20110318093356.b939558d.randy.dunlap@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Some archs want to prevent the default affinity being set on their
chips in the reqeust_irq() path.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Special function for demultiplexing handlers which can be disabled via
disable_irq().
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Last user gone.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

handle_prio_irq is almost identical with handle_fasteoi_irq. The
subtle differences are

1) The handler checks for IRQ_DISABLED after the device handler has
   been called. In case it's set it masks the interrupt.

2) When the handler sees IRQ_DISABLED on entry it masks the interupt
   in the same way as handle_fastoei_irq, but does not set the
   IRQ_PENDING flag.

3) Instead of gracefully handling a recursive interrupt it crashes the
   kernel.

#1 is just relevant when a device handler calls disable_irq_nosync()
   and it does not matter whether we mask the interrupt right away or
   not. We handle lazy masking for disable_irq anyway, so there is no
   real reason to have this extra mask in place.

#2 will prevent the resend of a pending interrupt, which can result in
   lost interrupts for edge type interrupts. For level type interrupts
   the resend is a noop in the generic code. According to the
   datasheet all interrupts are level type, so marking them as such
   will result in the exact same behaviour as the private
   handle_prio_irq implementation.

#3 is just stupid. Crashing the kernel instead of handling a problem
   gracefully is just wrong. With the current semantics- all handlers
   run with interrupts disabled - this is even more wrong.

Rename ack to eoi, remove the unused mask_ack, switch to
handle_fasteoi_irq and remove the private function.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: NUwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
LKML-Reference: <20110202212552.299898447@linutronix.de>

The core handler is a full equivalent replacement.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This is a replacment for the cell flow handler which is in the way of
cleanups. Must be selected to avoid general bloat.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We really need these flags for some of the interrupt chips. Move it
from internal state to irq_data and provide proper accessors.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: David Daney <ddaney@caviumnetworks.com>

The .irq_cpu_online() and .irq_cpu_offline() functions may need to
adjust affinity, but they are called with the descriptor lock held.
Create __irq_set_affinity_locked() which is called with the lock held.
Make irq_set_affinity() just a wrapper that acquires the lock.

[ tglx: Changed the argument to irq_data, added a !desc check and
        moved the !irq_set_affinity check where it belongs ]
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
LKML-Reference: <1301081931-11240-4-git-send-email-ddaney@caviumnetworks.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add a flag which indicates that the on/offline callback should only be
called on enabled interrupts.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

[ tglx: Removed the enabled argument as this is now available in
irq_data ]
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
LKML-Reference: <1301081931-11240-3-git-send-email-ddaney@caviumnetworks.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Some irq_chip implementation require to know the disabled state of the
interrupt in certain callbacks. Add a state flag and accessor to
irq_data.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The helper macros and functions like for_each_active_irq() don't work
unless the irq is in the allocated_irqs set.

In the case of !CONFIG_SPARSE_IRQ, instead of forcing all users of the
irq infrastructure to explicitly call irq_reserve_irq(), do it for
them.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
LKML-Reference: <1301081931-11240-2-git-send-email-ddaney@caviumnetworks.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

* 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  Introduce ARCH_NO_SYSDEV_OPS config option (v2)
  cpufreq: Use syscore_ops for boot CPU suspend/resume (v2)
  KVM: Use syscore_ops instead of sysdev class and sysdev
  PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev
  timekeeping: Use syscore_ops instead of sysdev class and sysdev
  x86: Use syscore_ops instead of sysdev classes and sysdevs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix test of uninitialized netdev

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (55 commits)
  [SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module
  [SCSI] qla4xxx: Use polling mode for disable interrupt mailbox completion
  [SCSI] Revert "[SCSI] Retrieve the Caching mode page"
  [SCSI] bnx2fc: IO completion not processed due to missed wakeup
  [SCSI] qla4xxx: Update driver version to 5.02.00-k6
  [SCSI] qla4xxx: masking required bits of add_fw_options during initialization
  [SCSI] qla4xxx: added new function qla4xxx_relogin_all_devices
  [SCSI] qla4xxx: add support for ql4xsess_recovery_tmo cmd line param
  [SCSI] qla4xxx: Add support for ql4xmaxqdepth command line parameter
  [SCSI] qla4xxx: cleanup function qla4xxx_process_ddb_changed
  [SCSI] qla4xxx: Prevent other port reinitialization during remove_adapter
  [SCSI] qla4xxx: remove unused ddb flag DF_NO_RELOGIN
  [SCSI] qla4xxx: cleanup DDB relogin logic during initialization
  [SCSI] qla4xxx: Do not retry ISP82XX initialization if H/W state is failed
  [SCSI] qla4xxx: Do not send mbox command if FW is in failed state
  [SCSI] qla4xxx: cleanup qla4xxx_initialize_ddb_list()
  [SCSI] ses: add subenclosure support
  [SCSI] bnx2fc: Bump version to 1.0.1
  [SCSI] bnx2fc: Remove unnecessary module state checks
  [SCSI] bnx2fc: Fix MTU issue by using static MTU
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kdb: add usage string of 'per_cpu' command
  kgdb,x86_64: fix compile warning found with sparse
  kdb: code cleanup to use macro instead of value
  kgdboc,kgdbts: strlen() doesn't count the terminator

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits)
  route: Take the right src and dst addresses in ip_route_newports
  ipv4: Fix nexthop caching wrt. scoping.
  ipv4: Invalidate nexthop cache nh_saddr more correctly.
  net: fix pch_gbe section mismatch warning
  ipv4: fix fib metrics
  mlx4_en: Removing HW info from ethtool -i report.
  net_sched: fix THROTTLED/RUNNING race
  drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region
  drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region
  bonding: fix rx_handler locking
  myri10ge: fix rmmod crash
  mlx4_en: updated driver version to 1.5.4.1
  mlx4_en: Using blue flame support
  mlx4_core: reserve UARs for userspace consumers
  mlx4_core: maintain available field in bitmap allocator
  mlx4: Add blue flame support for kernel consumers
  mlx4_en: Enabling new steering
  mlx4: Add support for promiscuous mode in the new steering model.
  mlx4: generalization of multicast steering.
  mlx4_en: Reporting HW revision in ethtool -i
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Disable ASPM when _OSC control is not granted for PCIe services
  PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIs
  PCI: PCIe links may not get configured for ASPM under POWERSAVE mode
  PCI/ACPI: Report ASPM support to BIOS if not disabled from command line

* git://git.infradead.org/battery-2.6: (30 commits)
  bq20z75: Fix time and temp units
  bq20z75: Fix issues with present and suspend
  z2_battery: Fix count of properties
  s3c_adc_battery: Fix method names when PM not set
  z2_battery: Add MODULE_DEVICE_TABLE
  ds2782_battery: Add MODULE_DEVICE_TABLE
  bq20z75: Add MODULE_DEVICE_TABLE
  power_supply: Update power_supply_is_watt_property
  bq20z75: Add i2c retry mechanism
  bq20z75: Add optional battery detect gpio
  twl4030_charger: Make the driver atomic notifier safe
  bq27x00: Use single i2c_transfer call for property read
  bq27x00: Cleanup bq27x00_i2c_read
  bq27x00: Minor cleanups
  bq27x00: Give more specific reports on battery status
  bq27x00: Add MODULE_DEVICE_TABLE
  bq27x00: Add new properties
  bq27x00: Poll battery state
  bq27x00: Cache battery registers
  bq27x00: Add bq27000 support
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm stripe: implement merge method
  dm mpath: allow table load with no priority groups
  dm mpath: fail message ioctl if specified path is not valid
  dm ioctl: add flag to wipe buffers for secure data
  dm ioctl: prepare for crypt key wiping
  dm crypt: wipe keys string immediately after key is set
  dm: add flakey target
  dm: fix opening log and cow devices for read only tables

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: tsc2005 - fix locking issue
  Input: tsc2005 - use relative jiffies to schedule the watchdog
  Input: tsc2005 - driver should depend on GENERIC_HARDIRQS

Merge branch 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (23 commits)
  genirq: Expand generic show_interrupts()
  gpio: Fold irq_set_chip/irq_set_handler to irq_set_chip_and_handler
  gpio: Cleanup genirq namespace
  arm: ep93xx: Add basic interrupt info
  arm/gpio: Remove three copies of broken and racy debug code
  xtensa: Use generic show_interrupts()
  xtensa: Convert genirq namespace
  xtensa: Use generic IRQ Kconfig and set GENERIC_HARDIRQS_NO_DEPRECATED
  xtensa: Convert s6000 gpio irq_chip to new functions
  xtensa: Convert main irq_chip to new functions
  um: Use generic show_interrupts()
  um: Convert genirq namespace
  m32r: Use generic show_interrupts()
  m32r: Convert genirq namespace
  h8300: Use generic show_interrupts()
  h8300: Convert genirq namespace
  avr32: Cleanup eic_set_irq_type()
  avr32: Use generic show_interrupts()
  avr: Cleanup genirq namespace
  avr32: Use generic IRQ config, enable GENERIC_HARDIRQS_NO_DEPRECATED
  ...

Fix up trivial conflict in drivers/gpio/timbgpio.c

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched, doc: Update sched-design-CFS.txt
  sched: Remove unused 'rq' variable and cpu_rq() call from alloc_fair_sched_group()
  sched.h: Fix a typo ("its")
  sched: Fix yield_to kernel-doc

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86: Complain louder about BIOSen corrupting CPU/PMU state and continue
  perf, x86: P4 PMU - Read proper MSR register to catch unflagged overflows
  perf symbols: Look at .dynsym again if .symtab not found
  perf build-id: Add quirk to deal with perf.data file format breakage
  perf session: Pass evsel in event_ops->sample()
  perf: Better fit max unprivileged mlock pages for tools needs
  perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx()
  perf top: Fix uninitialized 'counter' variable
  tracing: Fix set_ftrace_filter probe function display
  perf, x86: Fix Intel fixed counters base initialization

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Provide locked setter for chip, handler, name
  genirq: Provide a lockdep helper
  genirq; Remove the last leftovers of the old sparse irq code

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: Fix WARN_ON() test for UP
  WARN_ON_SMP(): Allow use in if() statements on UP
  x86, dumpstack: Use %pB format specifier for stack trace
  vsprintf: Introduce %pB format specifier
  lockdep: Remove unused 'factor' variable from lockdep_stats_show()

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: DT: Cleanup namespace and call irq_set_irq_type() unconditional
  x86: DT: Fix return condition in irq_create_of_mapping()
  x86, mpparse: Move check_slot into CONFIG_X86_IO_APIC context

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: merge m68k and m68knommu arch directories

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc32: Fix multiple RTC detections on SUN4D

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] cmpxchg: implement cmpxchg64()
  [S390] xchg/cmpxchg: move to own header file
  [S390] ccwgroup_driver: remove duplicate members
  [S390] ccw_bus_type: make it static
  [S390] ccw_driver: remove duplicate members
  [S390] qdio: prevent handling of buffers if count is zero
  [S390] setup: register bss section as resource
  [S390] setup: simplify setup_resources()
  [S390] wire up sys_syncfs
  [S390] wire up sys_clock_adjtime
  [S390] wire up sys_open_by_handle_at
  [S390] wire up sys_name_to_handle_at
  [S390] oprofile: disable hw sampling for CONFIG_32BIT
  [S390] early: limit savesys cmd string handling
  [S390] early: Fix possible overlapping data buffer

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (49 commits)
  MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board
  MIPS: JZ4740: qi_lb60: Add gpio-charger device
  MIPS: Wire up syncfs(2).
  MIPS: Hook up name_to_handle_at, open_by_handle_at and clock_adjtime syscalls.
  MIPS: VR41xx: Convert to new irq_chip functions
  MIPS: TXx9: Convert to new irq_chip functions
  MIPS: SNI: Convert to new irq_chip functions
  MIPS: Sibyte: Convert to new irq_chip functions
  MIPS: IP32: Convert to new irq_chip functions
  MIPS: IP27: Convert to new irq_chip functions
  MIPS: IP22/IP28: Convert to new irq_chip functions
  MIPS: RB532: Convert to new irq_chip functions
  MIPS: PowerTV: Convert to new irq_chip functions
  MIPS: PNX8550: Convert to new irq_chip functions
  MIPS: PNX83xx: Convert to new irq_chip functions
  MIPS: msp71xx: Convert to new irq_chip functions
  MIPS: Loongson: Convert to new irq_chip functions
  MIPS: Use generic show_interrupts()
  MIPS: SMTC: Cleanup the hook mess and use irq_data
  MIPS: SMTC: Use irq_data in smtc_forward_irq()
  ...

commit b515498f ("userns: add a user namespace owner of ipc ns") added a
user namespace owner of ipc ns, but it also introduced a use after free in
free_ipc_ns().
Signed-off-by: NXiaotian Feng <dfeng@redhat.com>
Acked-by: N"Serge E. Hallyn" <serge.hallyn@canonical.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 0bc825d2 ("codafs: fix compile warning when CONFIG_SYSCTL=n")
introduces build breakage, when CONFIG_PROC_SYSCTL=n and
CONFIG_CODA_FS=y:

  fs/built-in.o: In function `init_coda':
  psdev.c:(.init.text+0xc02): undefined reference to `coda_sysctl_init'
  psdev.c:(.init.text+0xc7c): undefined reference to `coda_sysctl_clean'
  fs/built-in.o: In function `exit_coda':
  psdev.c:(.exit.text+0xa9): undefined reference to `coda_sysctl_clean'
  make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
Reported-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Acked-by: NAlex Dubov <oakad@yahoo.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

Fix sparse warning:

arch/x86/kernel/kgdb.c:123:9: warning: switch with no cases
Reported-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

It's better to use macro KDB_BASE_CMD_MAX instead of 50
Signed-off-by: NJovi Zhang <bookjovi@gmail.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>