- 20 10月, 2010 22 次提交
-
-
由 Jeremy Kerr 提交于
Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: NJason Wang <jason77.wang@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Tested-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Jeremy Kerr 提交于
We have the same (empty) macro for all IDEDCC flavours, so consolidate it to one. Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com>
-
由 Nicolas Pitre 提交于
As mentioned in the comment right at the top, the first four fields are directly accessed by assembly code in head.S. Move nr_irqs so the comment is true again. Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
-
由 Fabio Estevam 提交于
Pass the correct GPIO to gpio_free Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NEric Bénard <eric@eukrea.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Eric Bénard 提交于
without this patch we get : arch/arm/mach-imx/built-in.o: In function `eukrea_cpuimx27_init': eukrea_mbimx27-baseboard.c:(.init.text+0x44c): undefined reference to `mxc_ulpi_access_ops' Signed-off-by: NEric Bénard <eric@eukrea.com> Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Eric Bénard 提交于
this patch fix the following errors : arch/arm/mach-mx3/mach-pcm037_eet.c:62: error: implicit declaration of function 'MXC_SPI_CS' arch/arm/mach-mx3/mach-pcm037_eet.c:185: error: implicit declaration of function 'imx35_add_spi_imx0' from the Kconfig pcm037 is i.MX31 based and not i.MX35 so replace imx35_add_spi_imx0 by imx31_add_spi_imx0 Signed-off-by: NEric Bénard <eric@eukrea.com> [ukl: remove unneeded #include <mach/spi.h>] Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Ian Lartey 提交于
This is only a partial revert of "ARM: mx3/mx31ads: fold board header in its only user" [commit ccfa7c26)] As some of the the board defines are also used in the cs89x0 ethernet driver by the i.MX31 ADS. Signed-off-by: NIan Lartey <ian@opensource.wolfsonmicro.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Eric Bénard 提交于
add NAND, SDHC Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Bénard 提交于
Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Bénard 提交于
this patch really configure the GPIO in GPIO mode. Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Bénard 提交于
Tested on i.MX25 and i.MX35 and i.MX51 Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Bénard 提交于
the attached patch allows SD to work on i.MX51 with Wolfram's drivers Tested on i.MX51. Based on original patch from: Richard Zhu <r65037@freescale.com> Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Bénard 提交于
Based on original patch from: Richard Zhu <r65037@freescale.com> Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Bénard 提交于
Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Bénard 提交于
Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Bénard 提交于
Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Bénard 提交于
the PHY is UTMI so don't create an ULPI viewpoint. Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Bénard 提交于
Without this exiting WFI can result in cache corruption. Code taken from Freescale's 2.6.27 BSP and tested on i.MX35 Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Bénard 提交于
this patch fix the following errors : arch/arm/plat-mxc/devices/platform-imx-dma.c:44: error: ‘MX25_SDMA_BASE_ADDR’ undeclared here (not in a function) arch/arm/plat-mxc/devices/platform-imx-dma.c:44: error: ‘MX25_INT_SDMA’ undeclared here (not in a function) Signed-off-by: NEric Bénard <eric@eukrea.com> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Eric Bénard 提交于
* get_rate_arm : when 400MHz clock is selected (cctl & 1<<14), ARM clock is 400MHz (MPLL * 3 / 4) and not 800MHz * get_rate_per : peripherals's clock is derived from AHB and not from IPG (ref manual : figure 5-1) * can2_clk : use the correct ID * without this patch, peripherals getting their clock from PER clocks work fine because of the 2 errors which fix themselves (ARM clock x 2 and per clock actually based on IPG which is AHB/2) but flexcan can't work as it gets its clock from IPG and thus calculates its bitrate using a reference value which is twice what it really is. Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Marc Kleine-Budde 提交于
During the reorganisation of the imx-i2c devices (in 64de5ec1) the 3rd imx-i2c device for the mx35 got lost. This patch adds the missing device. Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Dinh Nguyen 提交于
Add IRAM(Internal RAM) allocation functions using GENERIC_ALLOCATOR. The allocation size is 4KB multiples to guarantee alignment. The idea for these functions is for i.MX platforms to use them to dynamically allocate IRAM usage. Applies on 2.6.36-rc7 Signed-off-by: NDinh Nguyen <Dinh.Nguyen@freescale.com> Reviewed-by: NAmit Kucheria <amit.kucheria@canonical.com> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 19 10月, 2010 2 次提交
-
-
由 Kukjin Kim 提交于
This patch fixes build error about GPIO address due to conflict of commit 4d914705 and 19a2c065. - commit 4d914705: Fix on GPIO base addresses - commit 19a2c065: Moves initial map for merging S5P64X0 Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Srinidhi Kasagar 提交于
Update Kconfig text accordingly. Signed-off-by: Nsrinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 10月, 2010 16 次提交
-
-
由 SeungChull Suh 提交于
This patch adds header <linux/sched.h> into the below files for build with CONFIG_PREEMPT_NONE. arch/arm/mach-s5p64x0/cpu.c Signed-off-by: NSeung-Chull Suh <sc.suh@samsung.com> [kgene.kim@samsung.com: edited title and message] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Atul Dahiya 提交于
The patch removes s3c_gpio_lock/unlock to avoid acquiring the lock recursively as lock is already acquired by calling function. Signed-off-by: NAtul Dahiya <atul.dahiya@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> [kgene.kim@samsung.com: removed useless variable due to this] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Abhilash Kesavan 提交于
The s5p64x0_sysclass should be used in place of the obselete s5p6440_sysclass. Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Naveen Krishna Ch 提交于
Fix the touch screen device name from s3c64x0-adc to s3c64xx-adc. Signed-off-by: NNaveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates s5p64x0_defconfig and changes the name from s5p6440_defconfig so that can support S5P6440 and S5P6450 with one kernel. Tested on SMDK6440(S5P6440) and SMDK6450(S5P6450). Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds UART serial port support for S5P6450 SoC. The S5P6450 has 6 UARTs, so adds resource of UART4 and UART5. And to fix membase which is in serial/samsung.c is from Ben Dooks. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org>
-
由 Kukjin Kim 提交于
This patch moves smdk6440 board file from mach-s5p6440 into the new mach-s5p64x0 directory and adds smdk6450 board file. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch moves S5P6440 GPIO support files from mach-s5p6440 into the new mach-s5p64x0 for merge S5P6440 and S5P6450 SocS. NOTE: Not supported S5P6450 GPIO yet. Will be supported soon. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds S5P6450 I2C support in the ARCH_S5P64X0. And moves S5P6440 I2C support files into the mach-s5p64x0 together. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch moves DMA support files in the mach-s5p64x0 for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates timer support for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates IRQ support for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates regarding clock files for supporting S5P6440 and S5P6450 with one kernel image. The mach-s5p64x0/clock.c is for common of them and there are specific clock files for each SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds ARCH_S5P64X0 which can support S5P6440 and S5P6450 with one kernel image. So moved some files of mach-s5p6440 into the new ARCH directory mach-s5p64x0. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates the Kconfig and Makefile for the S5P6440 and S5P6450 machines. It also updates arch/arm/ Kconfig and Makefile to include for support ARCH_S5P64X0 with one kernel image. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-