- 07 8月, 2008 2 次提交
-
-
由 Frank Myhr 提交于
AMD NPT 0Fh cpus use 6 bit VID codes. Successive codes with msb 0 describe 25mV decrements, while those with msb 1 describe 12.5mV decrements. Existing hwmon-vid.c is correct only for codes with msb 0; add support for the codes with msb 1. Ref: p 309, Table 71 AMD Publication 32559, BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdfSigned-off-by: NFrank Myhr <fmyhr@fhmtech.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Frank Myhr 提交于
Signed-off-by: NFrank Myhr <fmyhr@fhmtech.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 20 10月, 2007 1 次提交
-
-
由 Mike Travis 提交于
cpu_data is currently an array defined using NR_CPUS. This means that we overallocate since we will rarely really use maximum configured cpus. When NR_CPU count is raised to 4096 the size of cpu_data becomes 3,145,728 bytes. These changes were adopted from the sparc64 (and ia64) code. An additional field was added to cpuinfo_x86 to be a non-ambiguous cpu index. This corresponds to the index into a cpumask_t as well as the per_cpu index. It's used in various places like show_cpuinfo(). cpu_data is defined to be the boot_cpu_data structure for the NON-SMP case. Signed-off-by: NMike Travis <travis@sgi.com> Acked-by: NChristoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 28 5月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
If we cannot guess which VRM version the CPU uses, we set it to 0 and log it. So we shouldn't spam the log each time vid_from_reg() is later called with vrm 0. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NRudolf Marek <r.marek@assembler.cz>
-
- 08 5月, 2007 1 次提交
-
-
由 Rudolf Marek 提交于
Update the VID type for certain VIA processors and remove the Itanium entries. Signed-off-by: NRudolf Marek <r.marek@assembler.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 19 1月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
I wonder how we came up with such a broken test in the first place. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 13 12月, 2006 1 次提交
-
-
由 Jean Delvare 提交于
The Silicon Hill club is not what it used to be. Signed-off-by: NRudolf Marek <r.marek@assembler.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 23 6月, 2006 2 次提交
-
-
由 Rudolf Marek 提交于
This patch adds support for two new VID codes, supporting Intel mobile Core processors and new Conroe based platforms. Signed-off-by: NRudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rudolf Marek 提交于
Following patch trims the VID value to correct number of bits for each VRM. Signed-off-by: NRudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 24 3月, 2006 1 次提交
-
-
由 Jean Delvare 提交于
Add support for the Intel Pentium M series to the hwmon-vid driver. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 06 1月, 2006 1 次提交
-
-
由 Rudolf Marek 提交于
This patch adds the VIA CENTAUR CPUs to detection table. Table was updated to treat future Intel x86 CPUs as VRD10. Stepping field was added, because some VIA CPUs have different VRM specs across stepping. I changed the vrm type to u8 because all drivers use u8 anyway. Signed-off-by: NRudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 06 9月, 2005 5 次提交
-
-
由 R.Marek@sh.cvut.cz 提交于
This patch updates the VID entries, so any future Intel CPU will be detected as unknown rather than 9.0 Signed-off-by: NRudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
I see very little reason why vid_from_reg is inlined. It is not exactly short, its parameters are seldom known in advance, and it is never called in speed critical areas. Uninlining it should cause little performance loss if any, and saves a signficant space as well as compilation time. As suggested by Alexey Dobriyan, I am leaving vid_to_reg inline for now, as it is short and has a single user so far. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Cleanup hwmon-vid a bit, fixing typos, rewording some comments and reindenting properly at places. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
The only part left in i2c-sensor is the VRM/VRD/VID handling code. This is in no way related to i2c, so it doesn't belong there. Move the code to hwmon, where it belongs. Note that not all hardware monitoring drivers do VRM/VRD/VID operations, so less drivers depend on hwmon-vid than there were depending on i2c-sensor. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
The i2c_detect function has no more user, delete it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-