Skip to content

L
linux

xiphi1978 / linux

通知 2
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 16 4月, 2012 1 次提交
  3. 20 3月, 2012 1 次提交
    • P
      perf report: Add a simple GTK2-based 'perf report' browser · c31a9457
      由 Pekka Enberg 提交于 
      This patch adds a simple GTK2-based browser to 'perf report' that's
based on the TTY-based browser in builtin-report.c.

To launch "perf report" using the new GTK interface just type:

  $ perf report --gtk

The interface is somewhat limited in features at the moment:

  - No callgraph support

  - No KVM guest profiling support

  - No color coding for percentages

  - No sorting from the UI

  - ..and many, many more!

That said, I think this patch a reasonable start to build future features on.
Signed-off-by: NPekka Enberg <penberg@kernel.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1202231952410.6689@tux.localdomain
[ committer note: Added #pragma to make gtk no strict prototype problem go
  away as suggested by Colin Walters modulo avoiding push/pop ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c31a9457
  5. 17 3月, 2012 2 次提交
  7. 09 3月, 2012 3 次提交
    • S
      perf report: Enable TUI in branch view mode · a68c2c58
      由 Stephane Eranian 提交于 
      This patch updates perf report to support TUI mode
when the perf.data file contains samples with branch
stacks.

For each row in the report, it is possible to annotate
either the source or target of each branch.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: acme@redhat.com
Cc: asharma@fb.com
Cc: ravitillo@lbl.gov
Cc: vweaver1@eecs.utk.edu
Cc: khandual@linux.vnet.ibm.com
Cc: dsahern@gmail.com
Link: http://lkml.kernel.org/r/1331246868-19905-5-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
      a68c2c58
    • S
      perf report: Auto-detect branch stack sampling mode · 993ac88d
      由 Stephane Eranian 提交于 
      This patch enhances perf report to auto-detect when the
perf.data file contains samples with branch stacks. That way it
is not necessary to use the -b option.

To force branch view mode to off, simply use --no-branch-stack.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: acme@redhat.com
Cc: asharma@fb.com
Cc: ravitillo@lbl.gov
Cc: vweaver1@eecs.utk.edu
Cc: khandual@linux.vnet.ibm.com
Cc: dsahern@gmail.com
Link: http://lkml.kernel.org/r/1331246868-19905-4-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
      993ac88d
    • R
      perf report: Add support for taken branch sampling · b50311dc
      由 Roberto Agostino Vitillo 提交于 
      This patch adds support for taken branch sampling, i.e, the
PERF_SAMPLE_BRANCH_STACK feature to perf report. In other
words, to display histograms based on taken branches rather
than executed instructions addresses.

The new option is called -b and it takes no argument. To
generate meaningful output, the perf.data must have been
obtained using perf record -b xxx ... where xxx is a branch
filter option.

The output shows symbols, modules, sorted by 'who branches
where' the most often. The percentages reported in the first
column refer to the total number of branches captured and
not the usual number of samples.

Here is a quick example.
Here branchy is simple test program which looks as follows:

void f2(void)
{}
void f3(void)
{}
void f1(unsigned long n)
{
  if (n & 1UL)
    f2();
  else
    f3();
}
int main(void)
{
  unsigned long i;

  for (i=0; i < N; i++)
   f1(i);
  return 0;
}

Here is the output captured on Nehalem, if we are
only interested in user level function calls.

$ perf record -b any_call,u -e cycles:u branchy

$ perf report -b --sort=symbol
    52.34%  [.] main                   [.] f1
    24.04%  [.] f1                     [.] f3
    23.60%  [.] f1                     [.] f2
     0.01%  [k] _IO_new_file_xsputn    [k] _IO_file_overflow
     0.01%  [k] _IO_vfprintf_internal  [k] _IO_new_file_xsputn
     0.01%  [k] _IO_vfprintf_internal  [k] strchrnul
     0.01%  [k] __printf               [k] _IO_vfprintf_internal
     0.01%  [k] main                   [k] __printf

About half (52%) of the call branches captured are from main()
-> f1(). The second half (24%+23%) is split in two equal shares
between f1() -> f2(), f1() ->f3(). The output is as expected
given the code.

It should be noted, that using -b in perf record does not
eliminate information in the perf.data file. Consequently, a
typical profile can also be obtained by perf report by simply
not using its -b option.

It is possible to sort on branch related columns:

   - dso_from, symbol_from
   - dso_to, symbol_to
   - mispredict
Signed-off-by: NRoberto Agostino Vitillo <ravitillo@lbl.gov>
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: acme@redhat.com
Cc: robert.richter@amd.com
Cc: ming.m.lin@intel.com
Cc: andi@firstfloor.org
Cc: asharma@fb.com
Cc: vweaver1@eecs.utk.edu
Cc: khandual@linux.vnet.ibm.com
Cc: dsahern@gmail.com
Link: http://lkml.kernel.org/r/1328826068-11713-14-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
      b50311dc
  9. 24 12月, 2011 1 次提交
    • R
      perf report: Accept fifos as input file · efad1415
      由 Robert Richter 提交于 
      The default input file for perf report is not handled the same way as
perf record does it for its output file. This leads to unexpected
behavior of perf report, etc. E.g.:

 # perf record -a -e cpu-cycles sleep 2 | perf report | cat
 failed to open perf.data: No such file or directory  (try 'perf record' first)

While perf record writes to a fifo, perf report expects perf.data to be
read. This patch changes this to accept fifos as input file.

Applies to the following commands:

 perf annotate
 perf buildid-list
 perf evlist
 perf kmem
 perf lock
 perf report
 perf sched
 perf script
 perf timechart

Also fixes char const* -> const char* type declaration for filename
strings.

v2:
* Prevent potential null pointer access to input_name in
  builtin-report.c. Needed due to removal of patch "perf report: Setup
  browser if stdout is a pipe"

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-5-git-send-email-robert.richter@amd.comSigned-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      efad1415
  11. 22 12月, 2011 1 次提交
  13. 20 12月, 2011 1 次提交
  15. 28 11月, 2011 7 次提交
  17. 08 10月, 2011 2 次提交
    • A
      perf tools: Make --no-asm-raw the default · 64c6f0c7
      由 Arnaldo Carvalho de Melo 提交于 
      And add the annotation output knobs to all the tools that have
integrated annotation (top, report).

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gnlob67mke6sji2kf4nstp7m@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      64c6f0c7
    • S
      perf tools: Make perf.data more self-descriptive (v8) · fbe96f29
      由 Stephane Eranian 提交于 
      The goal of this patch is to include more information about the host
environment into the perf.data so it is more self-descriptive. Overtime,
profiles are captured on various machines and it becomes hard to track
what was recorded, on what machine and when.

This patch provides a way to solve this by extending the perf.data file
with basic information about the host machine. To add those extensions,
we leverage the feature bits capabilities of the perf.data format.  The
change is backward compatible with existing perf.data files.

We define the following useful new extensions:
 - HEADER_HOSTNAME: the hostname
 - HEADER_OSRELEASE: the kernel release number
 - HEADER_ARCH: the hw architecture
 - HEADER_CPUDESC: generic CPU description
 - HEADER_NRCPUS: number of online/avail cpus
 - HEADER_CMDLINE: perf command line
 - HEADER_VERSION: perf version
 - HEADER_TOPOLOGY: cpu topology
 - HEADER_EVENT_DESC: full event description (attrs)
 - HEADER_CPUID: easy-to-parse low level CPU identication

The small granularity for the entries is to make it easier to extend
without breaking backward compatiblity. Many entries are provided as
ASCII strings.

Perf report/script have been modified to print the basic information as
easy-to-parse ASCII strings. Extended information about CPU and NUMA
topology may be requested with the -I option.

Thanks to David Ahern for reviewing and testing the many versions of
this patch.

 $ perf report --stdio
 # ========
 # captured on : Mon Sep 26 15:22:14 2011
 # hostname : quad
 # os release : 3.1.0-rc4-tip
 # perf version : 3.1.0-rc4
 # arch : x86_64
 # nrcpus online : 4
 # nrcpus avail : 4
 # cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
 # cpuid : GenuineIntel,6,15,11
 # total memory : 8105360 kB
 # cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
 # event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
 # HEADER_CPU_TOPOLOGY info available, use -I to display
 # HEADER_NUMA_TOPOLOGY info available, use -I to display
 # ========
 #
 ...

 $ perf report --stdio -I
 # ========
 # captured on : Mon Sep 26 15:22:14 2011
 # hostname : quad
 # os release : 3.1.0-rc4-tip
 # perf version : 3.1.0-rc4
 # arch : x86_64
 # nrcpus online : 4
 # nrcpus avail : 4
 # cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
 # cpuid : GenuineIntel,6,15,11
 # total memory : 8105360 kB
 # cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
 # event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
 # sibling cores   : 0-3
 # sibling threads : 0
 # sibling threads : 1
 # sibling threads : 2
 # sibling threads : 3
 # node0 meminfo  : total = 8320608 kB, free = 7571024 kB
 # node0 cpu list : 0-3
 # ========
 #
 ...
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110930134040.GA5575@quadSigned-off-by: NStephane Eranian <eranian@google.com>
[ committer notes: Use --show-info in the tools as was in the docs, rename
  perf_header_fprintf_info to perf_file_section__fprintf_info, fixup
  conflict with f69b64f7 "perf: Support setting the disassembler style" ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      fbe96f29
  19. 07 10月, 2011 3 次提交
  21. 30 9月, 2011 2 次提交
  23. 03 8月, 2011 1 次提交
  25. 05 7月, 2011 1 次提交
    • A
      perf report/annotate/script: Add option to specify a CPU range · 5d67be97
      由 Anton Blanchard 提交于 
      Add an option to perf report/annotate/script to specify which
CPUs to operate on. This enables us to take a single system wide
profile and analyse each CPU (or group of CPUs) in isolation.

This was useful when profiling a multiprocess workload where the
bottleneck was on one CPU but this was hidden in the overall
profile. Per process and per thread breakdowns didn't help
because multiple processes were running on each CPU and no
single process consumed an entire CPU.

The patch converts the list of CPUs returned by cpu_map__new
into a bitmap for fast lookup. I wanted to use -C to be
consistent with perf top/record/stat, but unfortunately perf
report already uses -C <comms>.

 v2: Incorporate suggestions from David Ahern:
	- Added -c to perf script
	- Check that SAMPLE_CPU is set when -c is used
	- Update documentation

 v3: Create perf_session__cpu_bitmap()
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20110704215750.11647eb9@krytenSigned-off-by: NIngo Molnar <mingo@elte.hu>
      5d67be97
  27. 30 6月, 2011 2 次提交
    • F
      perf tools: Only display parent field if explictly sorted · cb1955b8
      由 Frederic Weisbecker 提交于 
      We don't need to display the parent field if the parent
sorting machinery is only used for parent filtering
(as in "-p foo").

However if parent filtering is used in combination with
explicit parent sorting ( -s parent), we want to
display it.

Result with:

  perf report -p kernel_thread -s parent

Before:

 # Overhead  Parent symbol
 # ........  .............
 #
     0.07%
            |
            --- ioread8
                ata_sff_check_status
                ata_sff_tf_load
                ata_sff_qc_issue
                ata_bmdma_qc_issue
                ata_qc_issue
                ata_scsi_translate
                ata_scsi_queuecmd
                scsi_dispatch_cmd
                scsi_request_fn
                __blk_run_queue
                __make_request
                generic_make_request
                submit_bio
                submit_bh
                journal_submit_commit_record
                jbd2_journal_commit_transaction
                kjournald2
                kthread
                kernel_thread_helpe

After:

 # Overhead  Parent symbol
 # ........  .............
 #
     0.07%  kernel_thread_helper
            |
            --- ioread8
                ata_sff_check_status
                ata_sff_tf_load
                ata_sff_qc_issue
                ata_bmdma_qc_issue
                ata_qc_issue
                ata_scsi_translate
                ata_scsi_queuecmd
                scsi_dispatch_cmd
                scsi_request_fn
                __blk_run_queue
                __make_request
                generic_make_request
                submit_bio
                submit_bh
                journal_submit_commit_record
                jbd2_journal_commit_transaction
                kjournald2
                kthread
                kernel_thread_helper
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Sam Liao <phyomh@gmail.com>
      cb1955b8
    • S
      perf tools: Add inverted call graph report support. · d797fdc5
      由 Sam Liao 提交于 
      Add "caller/callee" option to support inverted butterfly report,
in the inverted report (with caller option), the call graph start
from the callee's ancestor. Users can use such view to catch system's
performance bottleneck from a sysprof like view. Using this option
with specified sort order like pid gives us high level view of call
graph statistics.

Also add "-G" alias for inverted call graph.
Signed-off-by: NSam Liao <phyomh@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
      d797fdc5
  29. 28 5月, 2011 1 次提交
  31. 26 5月, 2011 1 次提交
    • A
      perf symbols: Handle /proc/sys/kernel/kptr_restrict · ec80fde7
      由 Arnaldo Carvalho de Melo 提交于 
      Perf uses /proc/modules to figure out where kernel modules are loaded.

With the advent of kptr_restrict, non root users get zeroes for all module
start addresses.

So check if kptr_restrict is non zero and don't generate the syntethic
PERF_RECORD_MMAP events for them.

Warn the user about it in perf record and in perf report.

In perf report the reference relocation symbol being zero means that
kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't
use it to fixup symbol addresses when using a valid kallsyms (in the buildid
cache) or vmlinux (in the vmlinux path) build-id located automatically or
specified by the user.

Provide an explanation about it in 'perf report' if kernel samples were taken,
checking if a suitable vmlinux or kallsyms was found/specified.

Restricted /proc/kallsyms don't go to the buildid cache anymore.

Example:

 [acme@emilia ~]$ perf record -F 100000 sleep 1

 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check
 /proc/sys/kernel/kptr_restrict.

 Samples in kernel functions may not be resolved if a suitable vmlinux file is
 not found in the buildid cache or in the vmlinux path.

 Samples in kernel modules won't be resolved at all.

 If some relocation was applied (e.g. kexec) symbols may be misresolved even
 with a suitable vmlinux or kallsyms file.

 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ]
 [acme@emilia ~]$

 [acme@emilia ~]$ perf report --stdio
 Kernel address maps (/proc/{kallsyms,modules}) were restricted,
 check /proc/sys/kernel/kptr_restrict before running 'perf record'.

 If some relocation was applied (e.g. kexec) symbols may be misresolved.

 Samples in kernel modules can't be resolved as well.

 # Events: 13  cycles
 #
 # Overhead  Command      Shared Object                 Symbol
 # ........  .......  .................  .....................
 #
    20.24%    sleep  [kernel.kallsyms]  [k] page_fault
    20.04%    sleep  [kernel.kallsyms]  [k] filemap_fault
    19.78%    sleep  [kernel.kallsyms]  [k] __lru_cache_add
    19.69%    sleep  ld-2.12.so         [.] memcpy
    14.71%    sleep  [kernel.kallsyms]  [k] dput
     4.70%    sleep  [kernel.kallsyms]  [k] flush_signal_handlers
     0.73%    sleep  [kernel.kallsyms]  [k] perf_event_comm
     0.11%    sleep  [kernel.kallsyms]  [k] native_write_msr_safe

 #
 # (For a higher level overview, try: perf report --sort comm,dso)
 #
 [acme@emilia ~]$

This is because it found a suitable vmlinux (build-id checked) in
/lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long
file name).

If we remove that file from the vmlinux path:

 [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \
		     /lib/modules/2.6.39-rc7+/build/vmlinux.OFF
 [acme@emilia ~]$ perf report --stdio
 [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562
 not found, continuing without symbols

 Kernel address maps (/proc/{kallsyms,modules}) were restricted, check
 /proc/sys/kernel/kptr_restrict before running 'perf record'.

 As no suitable kallsyms nor vmlinux was found, kernel samples can't be
 resolved.

 Samples in kernel modules can't be resolved as well.

 # Events: 13  cycles
 #
 # Overhead  Command      Shared Object  Symbol
 # ........  .......  .................  ......
 #
    80.31%    sleep  [kernel.kallsyms]  [k] 0xffffffff8103425a
    19.69%    sleep  ld-2.12.so         [.] memcpy

 #
 # (For a higher level overview, try: perf report --sort comm,dso)
 #
 [acme@emilia ~]$
Reported-by: NStephane Eranian <eranian@google.com>
Suggested-by: NDavid Miller <davem@davemloft.net>
Cc: Dave Jones <davej@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ec80fde7
  33. 24 3月, 2011 1 次提交
    • A
      perf session: Pass evsel in event_ops->sample() · 9e69c210
      由 Arnaldo Carvalho de Melo 提交于 
      Resolving the sample->id to an evsel since the most advanced tools,
report and annotate, and the others will too when they evolve to
properly support multi-event perf.data files.

Good also because it does an extra validation, checking that the ID is
valid when present. When that is not the case, the overhead is just a
branch + function call (perf_evlist__id2evsel).

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      9e69c210
  35. 10 3月, 2011 1 次提交
    • A
      perf session: Use evlist/evsel for managing perf.data attributes · a91e5431
      由 Arnaldo Carvalho de Melo 提交于 
      So that we can reuse things like the id to attr lookup routine
(perf_evlist__id2evsel) that uses a hash table instead of the linear
lookup done in the older perf_header_attr routines, etc.

Also to make evsels/evlist more pervasive an API, simplyfing using the
emerging perf lib.

cc: Arun Sharma <arun@sharma-home.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a91e5431
  37. 07 3月, 2011 2 次提交
    • A
      perf report tui: Improve multi event session support · 7f0030b2
      由 Arnaldo Carvalho de Melo 提交于 
      When multiple events were used in 'perf record', allow the user to
choose which one is wanted before showing the per event histograms.

Annotations will be performed on the chosen event.

Allow going back and forth from event to event quickly using just the
arrow keys and enter.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: William Cohen <wcohen@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      7f0030b2
    • A
      perf tools: Improve support for sessions with multiple events · e248de33
      由 Arnaldo Carvalho de Melo 提交于 
      By creating an perf_evlist out of the attributes in the perf.data file
header, so that we can use evlists and evsels when reading recorded
sessions in addition to when we record sessions.

More work is needed to allow tools to allow the user to select which
events are wanted when browsing sessions, be it just one or a subset of
them, aggregated or showed at the same time but with different
indications on the UI to allow seeing workloads thru different views at
the same time.

But the overall goal/trend is to more uniformly use evsels and evlists.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e248de33
  39. 18 2月, 2011 1 次提交
  41. 11 2月, 2011 1 次提交
    • A
      perf report: Fix initializion of annotate symbol priv area · 0849327d
      由 Arnaldo Carvalho de Melo 提交于 
      We only allocate it when in TUI mode. In --stdio mode unconditionally
initializing this area leads to memory corruption.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0849327d
  43. 09 2月, 2011 1 次提交
    • A
      perf annotate: Move locking to struct annotation · ce6f4fab
      由 Arnaldo Carvalho de Melo 提交于 
      Since we'll need it when implementing the live annotate TUI browser.

This also simplifies things a bit by having the list head for the source
code to be in the dynamicly allocated part of struct annotation, that
way we don't have to pass it around, it can be found from the struct
symbol that is passed everywhere.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ce6f4fab
  45. 05 2月, 2011 2 次提交
    • A
      perf annotate: Support multiple histograms in annotation · 2f525d01
      由 Arnaldo Carvalho de Melo 提交于 
      The perf annotate tool continues aggregating everything on just one
histograms, but to support the top model add support for one histogram
perf evsel in the evlist.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2f525d01
    • A
      perf annotate: Move annotate functions to util/ · 78f7defe
      由 Arnaldo Carvalho de Melo 提交于 
      They will be used by perf top, so that we have just one set of routines
to do annotation.

Rename "struct sym_priv" to "struct annotation", etc, to clarify this
code a bit.

Rename "struct sym_ext" to "struct source_line", to give it a meaningful
name, that clarifies that it is a the result of an addr2line call, that
is sorted by percentage one particular source code line appeared in the
annotation.

And since we're moving things around also rename 'sym_hist->ip' to
'sym_hist->addr' as we want to do data structure annotation at some
point.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      78f7defe
  47. 01 2月, 2011 1 次提交