1. 04 2月, 2015 1 次提交
    • V
      ipv6: Select fragment id during UFO segmentation if not set. · 0508c07f
      Vlad Yasevich 提交于
      If the IPv6 fragment id has not been set and we perform
      fragmentation due to UFO, select a new fragment id.
      We now consider a fragment id of 0 as unset and if id selection
      process returns 0 (after all the pertrubations), we set it to
      0x80000000, thus giving us ample space not to create collisions
      with the next packet we may have to fragment.
      
      When doing UFO integrity checking, we also select the
      fragment id if it has not be set yet.   This is stored into
      the skb_shinfo() thus allowing UFO to function correclty.
      
      This patch also removes duplicate fragment id generation code
      and moves ipv6_select_ident() into the header as it may be
      used during GSO.
      Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0508c07f
  2. 03 2月, 2015 7 次提交
  3. 02 2月, 2015 1 次提交
    • E
      ipv4: tcp: get rid of ugly unicast_sock · bdbbb852
      Eric Dumazet 提交于
      In commit be9f4a44 ("ipv4: tcp: remove per net tcp_sock")
      I tried to address contention on a socket lock, but the solution
      I chose was horrible :
      
      commit 3a7c384f ("ipv4: tcp: unicast_sock should not land outside
      of TCP stack") addressed a selinux regression.
      
      commit 0980e56e ("ipv4: tcp: set unicast_sock uc_ttl to -1")
      took care of another regression.
      
      commit b5ec8eea ("ipv4: fix ip_send_skb()") fixed another regression.
      
      commit 811230cd ("tcp: ipv4: initialize unicast_sock sk_pacing_rate")
      was another shot in the dark.
      
      Really, just use a proper socket per cpu, and remove the skb_orphan()
      call, to re-enable flow control.
      
      This solves a serious problem with FQ packet scheduler when used in
      hostile environments, as we do not want to allocate a flow structure
      for every RST packet sent in response to a spoofed packet.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bdbbb852
  4. 01 2月, 2015 2 次提交
    • E
      net: sched: fix panic in rate estimators · 0d32ef8c
      Eric Dumazet 提交于
      Doing the following commands on a non idle network device
      panics the box instantly, because cpu_bstats gets overwritten
      by stats.
      
      tc qdisc add dev eth0 root <your_favorite_qdisc>
      ... some traffic (one packet is enough) ...
      tc qdisc replace dev eth0 root est 1sec 4sec <your_favorite_qdisc>
      
      [  325.355596] BUG: unable to handle kernel paging request at ffff8841dc5a074c
      [  325.362609] IP: [<ffffffff81541c9e>] __gnet_stats_copy_basic+0x3e/0x90
      [  325.369158] PGD 1fa7067 PUD 0
      [  325.372254] Oops: 0000 [#1] SMP
      [  325.375514] Modules linked in: ...
      [  325.398346] CPU: 13 PID: 14313 Comm: tc Not tainted 3.19.0-smp-DEV #1163
      [  325.412042] task: ffff8800793ab5d0 ti: ffff881ff2fa4000 task.ti: ffff881ff2fa4000
      [  325.419518] RIP: 0010:[<ffffffff81541c9e>]  [<ffffffff81541c9e>] __gnet_stats_copy_basic+0x3e/0x90
      [  325.428506] RSP: 0018:ffff881ff2fa7928  EFLAGS: 00010286
      [  325.433824] RAX: 000000000000000c RBX: ffff881ff2fa796c RCX: 000000000000000c
      [  325.440988] RDX: ffff8841dc5a0744 RSI: 0000000000000060 RDI: 0000000000000060
      [  325.448120] RBP: ffff881ff2fa7948 R08: ffffffff81cd4f80 R09: 0000000000000000
      [  325.455268] R10: ffff883ff223e400 R11: 0000000000000000 R12: 000000015cba0744
      [  325.462405] R13: ffffffff81cd4f80 R14: ffff883ff223e460 R15: ffff883feea0722c
      [  325.469536] FS:  00007f2ee30fa700(0000) GS:ffff88407fa20000(0000) knlGS:0000000000000000
      [  325.477630] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [  325.483380] CR2: ffff8841dc5a074c CR3: 0000003feeae9000 CR4: 00000000001407e0
      [  325.490510] Stack:
      [  325.492524]  ffff883feea0722c ffff883fef719dc0 ffff883feea0722c ffff883ff223e4a0
      [  325.499990]  ffff881ff2fa79a8 ffffffff815424ee ffff883ff223e49c 000000015cba0744
      [  325.507460]  00000000f2fa7978 0000000000000000 ffff881ff2fa79a8 ffff883ff223e4a0
      [  325.514956] Call Trace:
      [  325.517412]  [<ffffffff815424ee>] gen_new_estimator+0x8e/0x230
      [  325.523250]  [<ffffffff815427aa>] gen_replace_estimator+0x4a/0x60
      [  325.529349]  [<ffffffff815718ab>] tc_modify_qdisc+0x52b/0x590
      [  325.535117]  [<ffffffff8155edd0>] rtnetlink_rcv_msg+0xa0/0x240
      [  325.540963]  [<ffffffff8155ed30>] ? __rtnl_unlock+0x20/0x20
      [  325.546532]  [<ffffffff8157f811>] netlink_rcv_skb+0xb1/0xc0
      [  325.552145]  [<ffffffff8155b355>] rtnetlink_rcv+0x25/0x40
      [  325.557558]  [<ffffffff8157f0d8>] netlink_unicast+0x168/0x220
      [  325.563317]  [<ffffffff8157f47c>] netlink_sendmsg+0x2ec/0x3e0
      
      Lets play safe and not use an union : percpu 'pointers' are mostly read
      anyway, and we have typically few qdiscs per host.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Cc: John Fastabend <john.fastabend@gmail.com>
      Fixes: 22e0f8b9 ("net: sched: make bstats per cpu and estimator RCU safe")
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0d32ef8c
    • H
      hyperv: Fix the error processing in netvsc_send() · d953ca4d
      Haiyang Zhang 提交于
      The existing code frees the skb in EAGAIN case, in which the skb will be
      retried from upper layer and used again.
      Also, the existing code doesn't free send buffer slot in error case, because
      there is no completion message for unsent packets.
      This patch fixes these problems.
      
      (Please also include this patch for stable trees. Thanks!)
      Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
      Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d953ca4d
  5. 31 1月, 2015 9 次提交
    • I
      drivers: net: xgene: fix: Out of order descriptor bytes read · ecf6ba83
      Iyappan Subramanian 提交于
      This patch fixes the following kernel crash,
      
      	WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_input.c:3079 tcp_clean_rtx_queue+0x658/0x80c()
      	Call trace:
      	[<fffffe0000096b7c>] dump_backtrace+0x0/0x184
      	[<fffffe0000096d10>] show_stack+0x10/0x1c
      	[<fffffe0000685ea0>] dump_stack+0x74/0x98
      	[<fffffe00000b44e0>] warn_slowpath_common+0x88/0xb0
      	[<fffffe00000b461c>] warn_slowpath_null+0x14/0x20
      	[<fffffe00005b5c1c>] tcp_clean_rtx_queue+0x654/0x80c
      	[<fffffe00005b6228>] tcp_ack+0x454/0x688
      	[<fffffe00005b6ca8>] tcp_rcv_established+0x4a4/0x62c
      	[<fffffe00005bf4b4>] tcp_v4_do_rcv+0x16c/0x350
      	[<fffffe00005c225c>] tcp_v4_rcv+0x8e8/0x904
      	[<fffffe000059d470>] ip_local_deliver_finish+0x100/0x26c
      	[<fffffe000059dad8>] ip_local_deliver+0xac/0xc4
      	[<fffffe000059d6c4>] ip_rcv_finish+0xe8/0x328
      	[<fffffe000059dd3c>] ip_rcv+0x24c/0x38c
      	[<fffffe0000563950>] __netif_receive_skb_core+0x29c/0x7c8
      	[<fffffe0000563ea4>] __netif_receive_skb+0x28/0x7c
      	[<fffffe0000563f54>] netif_receive_skb_internal+0x5c/0xe0
      	[<fffffe0000564810>] napi_gro_receive+0xb4/0x110
      	[<fffffe0000482a2c>] xgene_enet_process_ring+0x144/0x338
      	[<fffffe0000482d18>] xgene_enet_napi+0x1c/0x50
      	[<fffffe0000565454>] net_rx_action+0x154/0x228
      	[<fffffe00000b804c>] __do_softirq+0x110/0x28c
      	[<fffffe00000b8424>] irq_exit+0x8c/0xc0
      	[<fffffe0000093898>] handle_IRQ+0x44/0xa8
      	[<fffffe000009032c>] gic_handle_irq+0x38/0x7c
      	[...]
      
      Software writes poison data into the descriptor bytes[15:8] and upon
      receiving the interrupt, if those bytes are overwritten by the hardware with
      the valid data, software also reads bytes[7:0] and executes receive/tx
      completion logic.
      
      If the CPU executes the above two reads in out of order fashion, then the
      bytes[7:0] will have older data and causing the kernel panic.  We have to
      force the order of the reads and thus this patch introduces read memory
      barrier between these reads.
      Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
      Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ecf6ba83
    • D
      Merge branch 'vlan_get_protocol' · 08178e5a
      David S. Miller 提交于
      Toshiaki Makita says:
      
      ====================
      Fix checksum error when using stacked vlan
      
      When I was testing 802.1ad, I found several drivers don't take into
      account 802.1ad or multiple vlans when retrieving L3 (IP/IPv6) or
      L4 (TCP/UDP) protocol for checksum offload.
      
      It is mainly due to vlan_get_protocol(), which extracts ether type only
      when it is tagged with single 802.1Q. When 802.1ad is used or there are
      multiple vlans, it extracts vlan protocol and drivers cannot determine
      which L3/L4 protocol is used.
      
      Those drivers, most of which have IP_CSUM/IPV6_CSUM features, get L3/L4
      header-offset by software, so it seems that their checksum offload works
      with multiple vlans if we can parse protocols correctly.
      (They know mac header length, and probably don't care about what is in it.)
      
      And another thing, some of Intel's drivers seem to use skb->protocol where
      vlan_get_protocol() is more suitable.
      
      I tested that at least igb/igbvf on I350 works with this patch set.
      
      Note:
      We can hand a double tagged packet with CHECKSUM_PARTIAL to a HW driver
      by creating a vlan device on a bridge device and enabling vlan_filtering
      of the bridge with 802.1ad protocol.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      08178e5a
    • T
      ixgbevf: Fix checksum error when using stacked vlan · 10e4fb33
      Toshiaki Makita 提交于
      When a skb has multiple vlans and it is CHECKSUM_PARTIAL,
      ixgbevf_tx_csum() fails to get the network protocol and checksum related
      descriptor fields are not configured correctly because skb->protocol
      doesn't show the L3 protocol in this case.
      
      Use first->protocol instead of skb->protocol to get the proper network
      protocol.
      Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      10e4fb33
    • T
      ixgbe: Fix checksum error when using stacked vlan · 0213668f
      Toshiaki Makita 提交于
      When a skb has multiple vlans and it is CHECKSUM_PARTIAL,
      ixgbe_tx_csum() fails to get the network protocol and checksum related
      descriptor fields are not configured correctly because skb->protocol
      doesn't show the L3 protocol in this case.
      
      Use vlan_get_protocol() to get the proper network protocol.
      Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0213668f
    • T
      igbvf: Fix checksum error when using stacked vlan · 72b14059
      Toshiaki Makita 提交于
      When a skb has multiple vlans and it is CHECKSUM_PARTIAL,
      igbvf_tx_csum() fails to get the network protocol and checksum related
      descriptor fields are not configured correctly because skb->protocol
      doesn't show the L3 protocol in this case.
      
      Use vlan_get_protocol() to get the proper network protocol.
      Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      72b14059
    • T
      net: Fix vlan_get_protocol for stacked vlan · d4bcef3f
      Toshiaki Makita 提交于
      vlan_get_protocol() could not get network protocol if a skb has a 802.1ad
      vlan tag or multiple vlans, which caused incorrect checksum calculation
      in several drivers.
      
      Fix vlan_get_protocol() to retrieve network protocol instead of incorrect
      vlan protocol.
      
      As the logic is the same as skb_network_protocol(), create a common helper
      function __vlan_get_protocol() and call it from existing functions.
      Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d4bcef3f
    • S
      net: sctp: fix passing wrong parameter header to param_type2af in sctp_process_param · cfbf654e
      Saran Maruti Ramanara 提交于
      When making use of RFC5061, section 4.2.4. for setting the primary IP
      address, we're passing a wrong parameter header to param_type2af(),
      resulting always in NULL being returned.
      
      At this point, param.p points to a sctp_addip_param struct, containing
      a sctp_paramhdr (type = 0xc004, length = var), and crr_id as a correlation
      id. Followed by that, as also presented in RFC5061 section 4.2.4., comes
      the actual sctp_addr_param, which also contains a sctp_paramhdr, but
      this time with the correct type SCTP_PARAM_IPV{4,6}_ADDRESS that
      param_type2af() can make use of. Since we already hold a pointer to
      addr_param from previous line, just reuse it for param_type2af().
      
      Fixes: d6de3097 ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT")
      Signed-off-by: NSaran Maruti Ramanara <saran.neti@telus.com>
      Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
      Acked-by: NVlad Yasevich <vyasevich@gmail.com>
      Acked-by: NNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cfbf654e
    • P
      netlink: fix wrong subscription bitmask to group mapping in · 8b7c36d8
      Pablo Neira 提交于
      The subscription bitmask passed via struct sockaddr_nl is converted to
      the group number when calling the netlink_bind() and netlink_unbind()
      callbacks.
      
      The conversion is however incorrect since bitmask (1 << 0) needs to be
      mapped to group number 1. Note that you cannot specify the group number 0
      (usually known as _NONE) from setsockopt() using NETLINK_ADD_MEMBERSHIP
      since this is rejected through -EINVAL.
      
      This problem became noticeable since 97840cb6 ("netfilter: nfnetlink:
      fix insufficient validation in nfnetlink_bind") when binding to bitmask
      (1 << 0) in ctnetlink.
      Reported-by: NAndre Tomt <andre@tomt.net>
      Reported-by: NIvan Delalande <colona@arista.com>
      Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8b7c36d8
    • P
      netfilter: nf_tables: fix leaks in error path of nf_tables_newchain() · f5553c19
      Pablo Neira Ayuso 提交于
      Release statistics and module refcount on memory allocation problems.
      Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
      f5553c19
  6. 30 1月, 2015 12 次提交
    • J
      ipvs: rerouting to local clients is not needed anymore · 579eb62a
      Julian Anastasov 提交于
      commit f5a41847 ("ipvs: move ip_route_me_harder for ICMP")
      from 2.6.37 introduced ip_route_me_harder() call for responses to
      local clients, so that we can provide valid rt_src after SNAT.
      It was used by TCP to provide valid daddr for ip_send_reply().
      After commit 0a5ebb80 ("ipv4: Pass explicit daddr arg to
      ip_send_reply()." from 3.0 this rerouting is not needed anymore
      and should be avoided, especially in LOCAL_IN.
      
      Fixes 3.12.33 crash in xfrm reported by Florian Wiessner:
      "3.12.33 - BUG xfrm_selector_match+0x25/0x2f6"
      Reported-by: NSmart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de>
      Tested-by: NSmart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de>
      Signed-off-by: NJulian Anastasov <ja@ssi.bg>
      Signed-off-by: NSimon Horman <horms@verge.net.au>
      579eb62a
    • L
      ipv4: Don't increase PMTU with Datagram Too Big message. · 3cdaa5be
      Li Wei 提交于
      RFC 1191 said, "a host MUST not increase its estimate of the Path
      MTU in response to the contents of a Datagram Too Big message."
      Signed-off-by: NLi Wei <lw@cn.fujitsu.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3cdaa5be
    • D
      Merge branch 'arm-build-fixes' · a1a0b558
      David S. Miller 提交于
      Arnd Bergmann says:
      
      ====================
      net: driver fixes from arm randconfig builds
      
      These four patches are fallout from test builds on ARM. I have a
      few more of them in my backlog but have not yet confirmed them
      to still be valid.
      
      The first three patches are about incomplete dependencies on
      old drivers. One could backport them to the beginning of time
      in theory, but there is little value since nobody would run into
      these problems.
      
      The final patch is one I had submitted before together with the
      respective pcmcia patch but forgot to follow up on that. It's
      still a valid but relatively theoretical bug, because the previous
      behavior of the driver was just as broken as what we have in
      mainline.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a1a0b558
    • A
      net: am2150: fix nmclan_cs.c shared interrupt handling · 96a30175
      Arnd Bergmann 提交于
      A recent patch tried to work around a valid warning for the use of a
      deprecated interface by blindly changing from the old
      pcmcia_request_exclusive_irq() interface to pcmcia_request_irq().
      
      This driver has an interrupt handler that is not currently aware
      of shared interrupts, but can be easily converted to be.
      At the moment, the driver reads the interrupt status register
      repeatedly until it contains only zeroes in the interesting bits,
      and handles each bit individually.
      
      This patch adds the missing part of returning IRQ_NONE in case none
      of the bits are set to start with, so we can move on to the next
      interrupt source.
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Fixes: 5f5316fc ("am2150: Update nmclan_cs.c to use update PCMCIA API")
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      96a30175
    • A
      net: lance,ni64: don't build for ARM · e9b106b8
      Arnd Bergmann 提交于
      The ni65 and lance ethernet drivers manually program the ISA DMA
      controller that is only available on x86 PCs and a few compatible
      systems. Trying to build it on ARM results in this error:
      
      ni65.c: In function 'ni65_probe1':
      ni65.c:496:62: error: 'DMA1_STAT_REG' undeclared (first use in this function)
           ((inb(DMA1_STAT_REG) >> 4) & 0x0f)
                                                                    ^
      ni65.c:496:62: note: each undeclared identifier is reported only once for each function it appears in
      ni65.c:497:63: error: 'DMA2_STAT_REG' undeclared (first use in this function)
           | (inb(DMA2_STAT_REG) & 0xf0);
      
      The DMA1_STAT_REG and DMA2_STAT_REG registers are only defined for
      alpha, mips, parisc, powerpc and x86, although it is not clear
      which subarchitectures actually have them at the correct location.
      
      This patch for now just disables it for ARM, to avoid randconfig
      build errors. We could also decide to limit it to the set of
      architectures on which it does compile, but that might look more
      deliberate than guessing based on where the drivers build.
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e9b106b8
    • A
      net: wan: add missing virt_to_bus dependencies · 303c28d8
      Arnd Bergmann 提交于
      The cosa driver is rather outdated and does not get built on most
      platforms because it requires the ISA_DMA_API symbol. However
      there are some ARM platforms that have ISA_DMA_API but no virt_to_bus,
      and they get this build error when enabling the ltpc driver.
      
      drivers/net/wan/cosa.c: In function 'tx_interrupt':
      drivers/net/wan/cosa.c:1768:3: error: implicit declaration of function 'virt_to_bus'
         unsigned long addr = virt_to_bus(cosa->txbuf);
         ^
      
      The same problem exists for the Hostess SV-11 and Sealevel Systems 4021
      drivers.
      
      This adds another dependency in Kconfig to avoid that configuration.
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      303c28d8
    • A
      net: cs89x0: always build platform code if !HAS_IOPORT_MAP · fc9a5707
      Arnd Bergmann 提交于
      The cs89x0 driver can either be built as an ISA driver or a platform
      driver, the choice is controlled by the CS89x0_PLATFORM Kconfig
      symbol. Building the ISA driver on a system that does not have
      a way to map I/O ports fails with this error:
      
      drivers/built-in.o: In function `cs89x0_ioport_probe.constprop.1':
      :(.init.text+0x4794): undefined reference to `ioport_map'
      :(.init.text+0x4830): undefined reference to `ioport_unmap'
      
      This changes the Kconfig logic to take that option away and
      always force building the platform variant of this driver if
      CONFIG_HAS_IOPORT_MAP is not set. This is the only correct
      choice in this case, and it avoids the build error.
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fc9a5707
    • F
      ppp: deflate: never return len larger than output buffer · e2a4800e
      Florian Westphal 提交于
      When we've run out of space in the output buffer to store more data, we
      will call zlib_deflate with a NULL output buffer until we've consumed
      remaining input.
      
      When this happens, olen contains the size the output buffer would have
      consumed iff we'd have had enough room.
      
      This can later cause skb_over_panic when ppp_generic skb_put()s
      the returned length.
      Reported-by: NIain Douglas <centos@1n6.org.uk>
      Signed-off-by: NFlorian Westphal <fw@strlen.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e2a4800e
    • D
      Merge branch 'netns' · d445d63b
      David S. Miller 提交于
      Nicolas Dichtel says:
      
      ====================
      netns: audit netdevice creation with IFLA_NET_NS_[PID|FD]
      
      When one of these attributes is set, the netdevice is created into the netns
      pointed by IFLA_NET_NS_[PID|FD] (see the call to rtnl_create_link() in
      rtnl_newlink()). Let's call this netns the dest_net. After this creation, if the
      newlink handler exists, it is called with a netns argument that points to the
      netns where the netlink message has been received (called src_net in the code)
      which is the link netns.
      Hence, with one of these attributes, it's possible to create a x-netns
      netdevice.
      
      Here is the result of my code review:
      - all ip tunnels (sit, ipip, ip6_tunnels, gre[tap][v6], ip_vti[6]) does not
        really allows to use this feature: the netdevice is created in the dest_net
        and the src_net is completely ignored in the newlink handler.
      - VLAN properly handles this x-netns creation.
      - bridge ignores src_net, which seems fine (NETIF_F_NETNS_LOCAL is set).
      - CAIF subsystem is not clear for me (I don't know how it works), but it seems
        to wrongly use src_net. Patch #1 tries to fix this, but it was done only by
        code review (and only compile-tested), so please carefully review it. I may
        miss something.
      - HSR subsystem uses src_net to parse IFLA_HSR_SLAVE[1|2], but the netdevice has
        the flag NETIF_F_NETNS_LOCAL, so the question is: does this netdevice really
        supports x-netns? If not, the newlink handler should use the dest_net instead
        of src_net, I can provide the patch.
      - ieee802154 uses also src_net and does not have NETIF_F_NETNS_LOCAL. Same
        question: does this netdevice really supports x-netns?
      - bonding ignores src_net and flag NETIF_F_NETNS_LOCAL is set, ie x-netns is not
        supported. Fine.
      - CAN does not support rtnl/newlink, ok.
      - ipvlan uses src_net and does not have NETIF_F_NETNS_LOCAL. After looking at
        the code, it seems that this drivers support x-netns. Am I right?
      - macvlan/macvtap uses src_net and seems to have x-netns support.
      - team ignores src_net and has the flag NETIF_F_NETNS_LOCAL, ie x-netns is not
        supported. Ok.
      - veth uses src_net and have x-netns support ;-) Ok.
      - VXLAN didn't properly handle this. The link netns (vxlan->net) is the src_net
        and not dest_net (see patch #2). Note that it was already possible to create a
        x-netns vxlan before the commit f01ec1c0 ("vxlan: add x-netns support")
        but the nedevice remains broken.
      
      To summarize:
       - CAIF patch must be carefully reviewed
       - for HSR, ieee802154, ipvlan: is x-netns supported?
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d445d63b
    • N
      vxlan: setup the right link netns in newlink hdlr · 33564bbb
      Nicolas Dichtel 提交于
      Rename the netns to src_net to avoid confusion with the netns where the
      interface stands. The user may specify IFLA_NET_NS_[PID|FD] to create
      a x-netns netndevice: IFLA_NET_NS_[PID|FD] points to the netns where the
      netdevice stands and src_net to the link netns.
      
      Note that before commit f01ec1c0 ("vxlan: add x-netns support"), it was
      possible to create a x-netns vxlan netdevice, but the netdevice was not
      operational.
      
      Fixes: f01ec1c0 ("vxlan: add x-netns support")
      Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      33564bbb
    • N
      caif: remove wrong dev_net_set() call · 8997c27e
      Nicolas Dichtel 提交于
      src_net points to the netns where the netlink message has been received. This
      netns may be different from the netns where the interface is created (because
      the user may add IFLA_NET_NS_[PID|FD]). In this case, src_net is the link netns.
      
      It seems wrong to override the netns in the newlink() handler because if it
      was not already src_net, it means that the user explicitly asks to create the
      netdevice in another netns.
      
      CC: Sjur Brændeland <sjur.brandeland@stericsson.com>
      CC: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
      Fixes: 8391c4aa ("caif: Bugfixes in CAIF netdevice for close and flow control")
      Fixes: c4125400 ("caif-hsi: Add rtnl support")
      Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8997c27e
    • K
      lib/checksum.c: fix build for generic csum_tcpudp_nofold · 9ce35779
      karl beldan 提交于
      Fixed commit added from64to32 under _#ifndef do_csum_ but used it
      under _#ifndef csum_tcpudp_nofold_, breaking some builds (Fengguang's
      robot reported TILEGX's). Move from64to32 under the latter.
      
      Fixes: 150ae0e9 ("lib/checksum.c: fix carry in csum_tcpudp_nofold")
      Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
      Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: David S. Miller <davem@davemloft.net>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9ce35779
  7. 29 1月, 2015 8 次提交
    • E
      tcp: ipv4: initialize unicast_sock sk_pacing_rate · 811230cd
      Eric Dumazet 提交于
      When I added sk_pacing_rate field, I forgot to initialize its value
      in the per cpu unicast_sock used in ip_send_unicast_reply()
      
      This means that for sch_fq users, RST packets, or ACK packets sent
      on behalf of TIME_WAIT sockets might be sent to slowly or even dropped
      once we reach the per flow limit.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Fixes: 95bd09eb ("tcp: TSO packets automatic sizing")
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      811230cd
    • K
      lib/checksum.c: fix carry in csum_tcpudp_nofold · 150ae0e9
      karl beldan 提交于
      The carry from the 64->32bits folding was dropped, e.g with:
      saddr=0xFFFFFFFF daddr=0xFF0000FF len=0xFFFF proto=0 sum=1,
      csum_tcpudp_nofold returned 0 instead of 1.
      Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com>
      Cc: Al Viro <viro@ZenIV.linux.org.uk>
      Cc: Eric Dumazet <eric.dumazet@gmail.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Mike Frysinger <vapier@gentoo.org>
      Cc: netdev@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Cc: stable@vger.kernel.org
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      150ae0e9
    • R
      bridge: dont send notification when skb->len == 0 in rtnl_bridge_notify · 59ccaaaa
      Roopa Prabhu 提交于
      Reported in: https://bugzilla.kernel.org/show_bug.cgi?id=92081
      
      This patch avoids calling rtnl_notify if the device ndo_bridge_getlink
      handler does not return any bytes in the skb.
      
      Alternately, the skb->len check can be moved inside rtnl_notify.
      
      For the bridge vlan case described in 92081, there is also a fix needed
      in bridge driver to generate a proper notification. Will fix that in
      subsequent patch.
      
      v2: rebase patch on net tree
      Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      59ccaaaa
    • D
      Merge branch 'tcp_stretch_acks' · 95224ac1
      David S. Miller 提交于
      Neal Cardwell says:
      
      ====================
      fix stretch ACK bugs in TCP CUBIC and Reno
      
      This patch series fixes the TCP CUBIC and Reno congestion control
      modules to properly handle stretch ACKs in their respective additive
      increase modes, and in the transitions from slow start to additive
      increase.
      
      This finishes the project started by commit 9f9843a7 ("tcp:
      properly handle stretch acks in slow start"), which fixed behavior for
      TCP congestion control when handling stretch ACKs in slow start mode.
      
      Motivation: In the Jan 2015 netdev thread 'BW regression after "tcp:
      refine TSO autosizing"', Eyal Perry documented a regression that Eric
      Dumazet determined was caused by improper handling of TCP stretch
      ACKs.
      
      Background: LRO, GRO, delayed ACKs, and middleboxes can cause "stretch
      ACKs" that cover more than the RFC-specified maximum of 2
      packets. These stretch ACKs can cause serious performance shortfalls
      in common congestion control algorithms, like Reno and CUBIC, which
      were designed and tuned years ago with receiver hosts that were not
      using LRO or GRO, and were instead ACKing every other packet.
      
      Testing: at Google we have been using this approach for handling
      stretch ACKs for CUBIC datacenter and Internet traffic for several
      years, with good results.
      
      v2:
       * fixed return type of tcp_slow_start() to be u32 instead of int
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      95224ac1
    • N
      tcp: fix timing issue in CUBIC slope calculation · d6b1a8a9
      Neal Cardwell 提交于
      This patch fixes a bug in CUBIC that causes cwnd to increase slightly
      too slowly when multiple ACKs arrive in the same jiffy.
      
      If cwnd is supposed to increase at a rate of more than once per jiffy,
      then CUBIC was sometimes too slow. Because the bic_target is
      calculated for a future point in time, calculated with time in
      jiffies, the cwnd can increase over the course of the jiffy while the
      bic_target calculated as the proper CUBIC cwnd at time
      t=tcp_time_stamp+rtt does not increase, because tcp_time_stamp only
      increases on jiffy tick boundaries.
      
      So since the cnt is set to:
      	ca->cnt = cwnd / (bic_target - cwnd);
      as cwnd increases but bic_target does not increase due to jiffy
      granularity, the cnt becomes too large, causing cwnd to increase
      too slowly.
      
      For example:
      - suppose at the beginning of a jiffy, cwnd=40, bic_target=44
      - so CUBIC sets:
         ca->cnt =  cwnd / (bic_target - cwnd) = 40 / (44 - 40) = 40/4 = 10
      - suppose we get 10 acks, each for 1 segment, so tcp_cong_avoid_ai()
         increases cwnd to 41
      - so CUBIC sets:
         ca->cnt =  cwnd / (bic_target - cwnd) = 41 / (44 - 41) = 41 / 3 = 13
      
      So now CUBIC will wait for 13 packets to be ACKed before increasing
      cwnd to 42, insted of 10 as it should.
      
      The fix is to avoid adjusting the slope (determined by ca->cnt)
      multiple times within a jiffy, and instead skip to compute the Reno
      cwnd, the "TCP friendliness" code path.
      Reported-by: NEyal Perry <eyalpe@mellanox.com>
      Signed-off-by: NNeal Cardwell <ncardwell@google.com>
      Signed-off-by: NYuchung Cheng <ycheng@google.com>
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d6b1a8a9
    • N
      tcp: fix stretch ACK bugs in CUBIC · 9cd981dc
      Neal Cardwell 提交于
      Change CUBIC to properly handle stretch ACKs in additive increase mode
      by passing in the count of ACKed packets to tcp_cong_avoid_ai().
      
      In addition, because we are now precisely accounting for stretch ACKs,
      including delayed ACKs, we can now remove the delayed ACK tracking and
      estimation code that tracked recent delayed ACK behavior in
      ca->delayed_ack.
      Reported-by: NEyal Perry <eyalpe@mellanox.com>
      Signed-off-by: NNeal Cardwell <ncardwell@google.com>
      Signed-off-by: NYuchung Cheng <ycheng@google.com>
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9cd981dc
    • N
      tcp: fix stretch ACK bugs in Reno · c22bdca9
      Neal Cardwell 提交于
      Change Reno to properly handle stretch ACKs in additive increase mode
      by passing in the count of ACKed packets to tcp_cong_avoid_ai().
      
      In addition, if snd_cwnd crosses snd_ssthresh during slow start
      processing, and we then exit slow start mode, we need to carry over
      any remaining "credit" for packets ACKed and apply that to additive
      increase by passing this remaining "acked" count to
      tcp_cong_avoid_ai().
      Reported-by: NEyal Perry <eyalpe@mellanox.com>
      Signed-off-by: NNeal Cardwell <ncardwell@google.com>
      Signed-off-by: NYuchung Cheng <ycheng@google.com>
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c22bdca9
    • N
      tcp: fix the timid additive increase on stretch ACKs · 814d488c
      Neal Cardwell 提交于
      tcp_cong_avoid_ai() was too timid (snd_cwnd increased too slowly) on
      "stretch ACKs" -- cases where the receiver ACKed more than 1 packet in
      a single ACK. For example, suppose w is 10 and we get a stretch ACK
      for 20 packets, so acked is 20. We ought to increase snd_cwnd by 2
      (since acked/w = 20/10 = 2), but instead we were only increasing cwnd
      by 1. This patch fixes that behavior.
      Reported-by: NEyal Perry <eyalpe@mellanox.com>
      Signed-off-by: NNeal Cardwell <ncardwell@google.com>
      Signed-off-by: NYuchung Cheng <ycheng@google.com>
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      814d488c