- 16 12月, 2006 12 次提交
-
-
由 Linus Torvalds 提交于
Nobody uses it, but it was still wrong. Using the macro argument name 'work' meant that when we used 'work' as a member name, that would also get replaced by the macro argument. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] cio: css_register_subchannel race. [S390] Save prefix register for dump on panic [S390] Fix reboot hang [S390] Fix reboot hang on LPARs [S390] sclp_cpi module license. [S390] zcrypt: module unload fixes. [S390] Hipersocket multicast queue: make sure outbound handler is called [S390] hypfs fixes [S390] update default configuration
-
由 Linus Torvalds 提交于
It has caused more problems than it ever really solved, and is apparently not getting cleaned up and fixed. We can put it back when it's stable and isn't likely to make warning or bug events worse. In the meantime, enable frame pointers for more readable stack traces. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Stefan Bader 提交于
Asynchronous probe can release memory of a subchannel before css_get_ssd_info is called. To fix this call css_get_ssd_info before registering with driver core. Signed-off-by: NStefan Bader <shbader@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
The dump tools expect that the saved prefix register points to the lowcore of the dump cpu. Since we set the prefix register to 0 during reipl/dump, we have to save the original prefix register. Before we start the dump program, we copy the original prefix register to the designated location in the lowcore. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
We use printks after shutting down all other cpus. This is not allowed and can lead to deadlocks. Therefore the printks have to be removed. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Reboot hangs on LPARs without diag308 support. The reason for this is, that before the reboot is done, the channel subsystem is shut down. During the reset on each possible subchannel a "store subchannel" is done. This operation can end in a program check interruption, if the specified subchannel set is not implemented by the hardware. During the reset, currently we do not have a program check handler, which leads to the described kernel bug. We install now a new program check handler for the reboot code to fix this problem. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
sclp_cpi is GPL. Make the module not taint the kernel Signed-off-by: NChristian Borntraeger <cborntra@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Ralph Wuerthner 提交于
Add code to reset all queues for a domain and add missing tasklet_kill call to ap bus module exit code. Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Ursula Braun 提交于
A HiperSocket multicast queue works asynchronously. When sending buffers, the buffer state change from PRIMED to EMPTY may happen delayed. Reschedule the checking for changes in the outbound queue, if there are still PRIMED buffers. Signed-off-by: NUrsula Braun <braunu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
Correct typo to make hypfs work on systems that support only diag204 subcode 4 and fix error handling in hypfs_diag_init. Signed-off-by: NChristian Borntraeger <cborntra@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 12月, 2006 28 次提交
-
-
由 Ben Collins 提交于
At least on PPC, the "op ? op : dma" construct causes a compile failure because the dma_* is a do{}while(0) macro. This turns all of them into proper if/else to avoid this problem. Signed-off-by: NBen Collins <bcollins@ubuntu.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
.. and so the stabilization phase starts. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Patrick McHardy 提交于
Remove the deferred hooks and all related code as scheduled in feature-removal-schedule. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kim Nordlund 提交于
Make fib6_node 'subtree' depend on IPV6_SUBTREES. Signed-off-by: NKim Nordlund <kim.nordlund@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Skytte Jorgensen 提交于
Signed-off-by: NIvan Skytte Jorgensen <isj-sctp@i1.dk> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sridhar Samudrala 提交于
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sridhar Samudrala 提交于
Currently in SCTP, we maintain a local address list by rebuilding the whole list from the device list whenever we get a address add/delete event. This patch fixes it by only adding/deleting the address for which we receive the event. Also removed the sctp_local_addr_lock() which is no longer needed as we now use list_for_each_safe() to traverse this list. This fixes the bugs in sctp_copy_laddrs_xxx() routines where we do copy_to_user() while holding this lock. Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It should call tcp_free_md5sig_pool() not __tcp_free_md5sig_pool() so that it does proper refcounting. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brian Haley 提交于
> Relevant standard (RFC 3493) notes: > > The IPV6_UNICAST_HOPS option may be used with getsockopt() to > determine the hop limit value that the system will use for subsequent > unicast packets sent via that socket. > > I don't reckon -1 could be the hop limit value. -1 means un-initialized. > IMHO, the value from > case 1 (if socket is connected to some destination), otherwise case 2 > (if bound to a scope interface) or ultimately the default hop limit > ought to be returned instead, as it will be most often correct, while > the current behavior is always wrong, unless setsockopt() has been used > first. I don't if some people may think doing a route lookup in > getsockopt might be overly expensive, but at least the two other cases > should be ok, particularly the last one. The following patch seems to work for me, but this code has behaved this way for a while, so don't know if it will break any existing apps. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian McDonald 提交于
In a recent patch we introduced invalid return codes which will result in the opposite of what is intended (i.e. send more packets in face of peculiar network conditions). This fixes it by returning ~0 which means not calculated as per dccp_li_hist_calc_i_mean. Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Al Viro 提交于
If we come to node we'd already marked as seen and it's not a part of path (i.e. we don't have a loop right there), we already know that it isn't a part of any loop, so we don't need to revisit it. That speeds the things up if some chain is refered to from several places and kills O(exp(table size)) worst-case behaviour (without sleeping, at that, so if you manage to self-LART that way, you are SOL for a long time)... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Mishin 提交于
Matches and targets verification is duplicated in normal and compat processing ways. This patch refactors code in order to remove this. Signed-off-by: NDmitry Mishin <dim@openvz.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yasuyuki Kozakai 提交于
CLUSTERIP, CONNMARK, CONNSECMARK, and connbytes need ip_conntrack or layer 3 protocol module of nf_conntrack. Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yasuyuki Kozakai 提交于
To do that, this makes nf_ct_l3proto_try_module_{get,put} compatible functions. As a result we can remove '#ifdef' surrounds and direct call of need_conntrack(). Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yasuyuki Kozakai 提交于
NF_NAT depends on NF_CONNTRACK_IPV4, not NF_CONNTRACK. Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Building with INET=n results in WARNING: "ip_route_output_key" [net/netfilter/nf_conntrack_h323.ko] undefined! The entire code in net/netfilter is only used for IPv4/IPv6 currently, so let it depend on INET. Noticed by Toralf Förster <toralf.foerster@gmx.de>. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4017/1: [Jornada7xx] - Updating Jornada720.c [ARM] 3992/1: i.MX/MX1 CPU Frequency scaling support [ARM] Provide a method to alter the control register [ARM] 4016/1: prefetch macro is wrong wrt gcc's "delete-null-pointer-checks" [ARM] Remove empty fixup function [ARM] 4014/1: include drivers/hid/Kconfig [ARM] 4013/1: clocksource driver for netx [ARM] 4012/1: Clocksource for pxa [ARM] Clean up ioremap code [ARM] Unuse another Linux PTE bit [ARM] Clean up KERNEL_RAM_ADDR [ARM] Add sys_*at syscalls [ARM] 4004/1: S3C24XX: UDC remove implict addition of VA to regs [ARM] Formalise the ARMv6 processor name string [ARM] Handle HWCAP_VFP in VFP support code [ARM] 4011/1: AT91SAM9260: Fix compilation with NAND driver [ARM] 4010/1: AT91SAM9260-EK board: Prepare for MACB Ethernet support
-
由 Linus Torvalds 提交于
* 'release' of master.kernel.org:/home/ftp/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Move sg_dma_{len,address} from pci.h to scatterlist.h
-
由 David Brownell 提交于
Deprecate the old "legacy" PM API, and more importantly default it to "n". Virtually nothing in-tree uses it any more. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Scott Wood 提交于
platform_device_add_data() makes a copy of the data that is given to it, and thus the parameter can be const. This removes a warning when data from get_property() on powerpc is handed to platform_device_add_data(), as get_property() returns a const pointer. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Morton 提交于
This function can be __init Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mathieu Desnoyers 提交于
Fix file and directory removal in debugfs. Add inotify support for file removal. The following scenario : create dir a create dir a/b cd a/b (some process goes in cwd a/b) rmdir a/b rmdir a fails due to the fact that "a" appears to be non empty. It is because the "b" dentry is not deleted from "a" and still in use. The same problem happens if "b" is a file. d_delete is nice enough to know when it needs to unhash and free the dentry if nothing else is using it or, if someone is using it, to remove it from the hash queues and wait for it to be deleted when it has no users. The nice side-effect of this fix is that it calls the file removal notification. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mathieu Desnoyers 提交于
Correct dentry count to handle creation errors. This patch puts a dput at the file creation instead of the file removal : lookup_one_len already returns a dentry with reference count of 1. Then, the dget() in simple_mknod increments it when the dentry is associated with a file. In a scenario where simple_create or simple_mkdir returns an error, this would lead to an unwanted increment of the reference counter, therefore making file removal impossible. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mathieu Desnoyers 提交于
Fix error handling of file and directory creation in DebugFS. The error path should release the file system because no _remove will be called for this erroneous creation. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mathieu Desnoyers 提交于
Minor coding style fixes along the way : 80 cols and a white space. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mathieu Desnoyers 提交于
Add inotify create and mkdir events to DebugFS. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Akinobu Mita 提交于
Class virtual directory is created as the need arises. But it is not deleted when the class is unregistered. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
Show the initialization state(live, coming, going) of the module: $ cat /sys/module/usbcore/initstate live Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-