- 26 3月, 2006 4 次提交
-
-
由 Malcolm Parsons 提交于
Patch from Malcolm Parsons Printking a backtrace requires printk, so disable backtrace code when printk is disabled. Without this patch, a kernel with CONFIG_PRINTK disabled does not link: arch/arm/lib/lib.a(backtrace.o): In function `c_backtrace': arch/arm/lib/backtrace.S:(.text+0x108): undefined reference to `printk' arch/arm/lib/backtrace.S:(.text+0x11c): undefined reference to `printk' arch/arm/lib/lib.a(backtrace.o):(.fixup+0x8): undefined reference to `printk' Signed-off-by: NMalcolm Parsons <malcolm.parsons@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas The current VFP code corrupts the VFP registers (including the control ones) if more than one floating point application is executed at the same time. This patch fixes the updating of the load/store base addresses for the VFP registers. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Pavel Machek 提交于
Patch from Pavel Machek This adds support for battery reading on collie. Collie slowly charges battery even with charging disabled, so I did not yet enable fast charge. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The recent addition of boot_cpu_init() implements the initialisation of the online, present and possible cpu maps for the boot CPU, so there is no reason to duplicate this in the architecture smp_prepare_boot_cpu() hook. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 24 3月, 2006 2 次提交
-
-
由 Hyok S. Choi 提交于
This patch renames symbols to a new style to prepare mpu support code merging. e.g. __armv4_cache_on --> __armv4_mmu_cache_on Signed-off-by: NHyok S. Choi <hyok.choi@samsung.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
5d25ac03 broke VFP builds due to enable_irq not being defined as an assembly macro. Move it to assembler.h so everyone can use it. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 23 3月, 2006 6 次提交
-
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek This patch changes iop3xx and omap2 and to use PLAT8250_DEV_PLATFORM{,1} as platform device id instead of just hardcoding 0/1 directly. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Erik Hovland 提交于
Patch from Erik Hovland I found a typo and what seems to be a run-on sentence in arch/arm/common/dmabounce.c This patch corrects both. Signed-off-by: NErik Hovland <erik@hovland.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Patch from Andrew Victor This patch includes a few changes to the clock support on the AT91RM9200. 1. Added definitions for Ethernet, MMC, TWI, USARTs, and SPI peripheral clocks. 2. Replaced some hard-coded hex values with the text definitions in at91rm9200_sys.h. 3. If the USB96M bit is set for PLLB, then the rate of PLLB is not affected but only the USB Host/Device clocks which are derived from it. Issue reported by Sergei Sharonov. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Patch from Andrew Victor If the timer interrupt is ever significantly delayed (or after the system was suspended), the system could spin incrementing the time for too long. The fix is to replace the "do {} while" with a "while {}". Orignal patch by Savin Zlobec and Peter Menzebach. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Unify the five existing ixp2000 defconfigs into one defconfig. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek ixp2000 used to initially mark GPIO interrupts as invalid, and not mark them valid until set_irq_type() was called, but this doesn't work if you want to use request_irq() with the SA_TRIGGER_* flags. So, just mark the GPIO interrupts valid from the beginning. We configure GPIOs as inputs when set_irq_type() is called anyway, so this shouldn't be a problem. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 3月, 2006 28 次提交
-
-
由 Nick Piggin 提交于
set_page_count usage outside mm/ is limited to setting the refcount to 1. Remove set_page_count from outside mm/, and replace those users with init_page_count() and set_page_refcounted(). This allows more debug checking, and tighter control on how code is allowed to play around with page->_count. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Have an explicit mm call to split higher order pages into individual pages. Should help to avoid bugs and be more explicit about the code's intention. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Russell King 提交于
Only issue a "nobody cared" warning after 99900 spurious interrupts. This avoids the occasional spurious interrupt causing warnings, as per x86. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Takashi Iwai 提交于
Modules: PXA Mainstone driver,CX88 driver,SAA7134 driver Replace snd_xxx_t typedefs with explicit structs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Russell King 提交于
We need this to be zero initialised. Since this is an array, use kcalloc rather than kzalloc or kmalloc. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
op_arm_sem is being used as a mutex, so convert it to use real mutexes. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Add Simtec Osiris to the default build, and enable the USB-OHCI section by default. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Fix the build of arch/arm/mach-s3c2410/mach-osiris.c and fix the warnings from sparse. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Add GPIO interrupt support for the first 16 GPIO lines (port A and B.) Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Add USB bus clock definition for 48MHz fed to OHCI and gadget cores Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Add set_rate methods for the extra clocks on the S3C2440 and add the camera UPLL clock source Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Add support for clk_set_rate and clk_round_rate to the s3c2410 clock implementation Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Convert all uses of kmalloc followed by memset to use kzalloc instead. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Move the uengine loader from arch/arm/mach-ixp2000 to arch/arm/common so that ixp23xx can use it too. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Add ep93xx defconfig. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Add support for setting the direction of and getting/setting the value of the 64 GPIO lines. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Alessandro Zummo 提交于
Patch from Alessandro Zummo ixp4xx_config_irq did not configure the gpio line as an input. As an added bonus, the irq2gpio array has been converted from int to char. Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Peter Teichmann 提交于
Patch from Peter Teichmann Currently, if the kernels HZ value is greater than 100, delays with the udelay function are too short. This can cause trouble for instance with the zd1201 usb wlan driver. This patch suggests a solution that keeps the overhead small and maintains (hopefully) sufficient resolution. Signed-off-by: Peter Teichmann Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena This patch adds support for Intel's IXDP28x5 platform. This is just and IXDP2801 with a new CPU rev but the bootloader has been updated to reflect a new machine ID so we just build support for it by default when we build IXDP2801. Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Add enable and set_parent calls for the dclk and clkout clocks. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Add clk_set_parent() call to clock code Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Move the UPLL clock registration to the central clock file, and add an enable method Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Add selection for timer code for the Simtec Osiris Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Support for Simtec IM2440D20 CPU modules (Osiris) Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre This field is redundent since it must be equal to PHYS_OFFSET anyway. There is no reference to it anymore so remove it at last. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-