提交 f1647e4c 编写于 作者: E Eric Miao

[ARM] pxa: move GPIOx_BASE and GPIO register offsets to gpio.c

Signed-off-by: NEric Miao <eric.miao@marvell.com>
上级 1f017a99
......@@ -25,6 +25,18 @@
#include "generic.h"
#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
#define GPLR_OFFSET 0x00
#define GPDR_OFFSET 0x0C
#define GPSR_OFFSET 0x18
#define GPCR_OFFSET 0x24
#define GRER_OFFSET 0x30
#define GFER_OFFSET 0x3C
#define GEDR_OFFSET 0x48
struct pxa_gpio_chip {
struct gpio_chip chip;
......
......@@ -203,19 +203,6 @@
* General Purpose I/O
*/
#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
#define GPLR_OFFSET 0x00
#define GPDR_OFFSET 0x0C
#define GPSR_OFFSET 0x18
#define GPCR_OFFSET 0x24
#define GRER_OFFSET 0x30
#define GFER_OFFSET 0x3C
#define GEDR_OFFSET 0x48
#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
......@@ -265,10 +252,6 @@
#define GPIO_bit(x) (1 << ((x) & 0x1f))
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
/* Interrupt Controller */
#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
......@@ -287,18 +270,7 @@
#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
#else
#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
#endif
/*
* Power Manager - see pxa2xx-regs.h
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册