提交 eedab661 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: move input-polldev to drivers/input
  Input: i8042 - add ULI EV4873 to noloop list
  Input: i8042 - add ASUS P65UP5 to the noloop list
  Input: usbtouchscreen - fix fallout caused by move from drivers/usb
......@@ -39,6 +39,19 @@ config INPUT_FF_MEMLESS
To compile this driver as a module, choose M here: the
module will be called ff-memless.
config INPUT_POLLDEV
tristate "Polled input device skeleton"
help
Say Y here if you are using a driver for an input
device that periodically polls hardware state. This
option is only useful for out-of-tree drivers since
in-tree drivers select it automatically.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called input-polldev.
comment "Userland interfaces"
config INPUT_MOUSEDEV
......
......@@ -8,6 +8,7 @@ obj-$(CONFIG_INPUT) += input-core.o
input-core-objs := input.o ff-core.o
obj-$(CONFIG_INPUT_FF_MEMLESS) += ff-memless.o
obj-$(CONFIG_INPUT_POLLDEV) += input-polldev.o
obj-$(CONFIG_INPUT_MOUSEDEV) += mousedev.o
obj-$(CONFIG_INPUT_JOYDEV) += joydev.o
......
......@@ -170,17 +170,6 @@ config INPUT_UINPUT
To compile this driver as a module, choose M here: the
module will be called uinput.
config INPUT_POLLDEV
tristate "Polled input device skeleton"
help
Say Y here if you are using a driver for an input
device that periodically polls hardware state. This
option is only useful for out-of-tree drivers since
in-tree drivers select it automatically.
To compile this driver as a module, choose M here: the
module will be called input-polldev.
config HP_SDC_RTC
tristate "HP SDC Real Time Clock"
depends on GSC || HP300
......
......@@ -4,7 +4,6 @@
# Each configuration option enables a list of files.
obj-$(CONFIG_INPUT_POLLDEV) += input-polldev.o
obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
......
......@@ -68,6 +68,15 @@ static inline void i8042_write_command(int val)
#include <linux/dmi.h>
static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
{
/* AUX LOOP command does not raise AUX IRQ */
.ident = "ASUS P65UP5",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
DMI_MATCH(DMI_BOARD_NAME, "P/I-P65UP5"),
DMI_MATCH(DMI_BOARD_VERSION, "REV 2.X"),
},
},
{
.ident = "Compaq Proliant 8500",
.matches = {
......@@ -92,6 +101,15 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
DMI_MATCH(DMI_PRODUCT_VERSION, "00"),
},
},
{
/* AUX LOOP does not work properly */
.ident = "ULI EV4873",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ULI"),
DMI_MATCH(DMI_PRODUCT_NAME, "EV4873"),
DMI_MATCH(DMI_PRODUCT_VERSION, "5a"),
},
},
{ }
};
......
......@@ -91,7 +91,7 @@ struct usbtouch_usb {
};
#if defined(CONFIG_USB_TOUCHSCREEN_EGALAX) || defined(CONFIG_USB_TOUCHSCREEN_ETURBO)
#if defined(CONFIG_TOUCHSCREEN_USB_EGALAX) || defined(CONFIG_TOUCHSCREEN_USB_ETURBO)
#define MULTI_PACKET
#endif
......@@ -113,7 +113,7 @@ enum {
};
static struct usb_device_id usbtouch_devices[] = {
#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
......@@ -123,30 +123,30 @@ static struct usb_device_id usbtouch_devices[] = {
{USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
{USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT},
{USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT},
{USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT},
{USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_3M
#ifdef CONFIG_TOUCHSCREEN_USB_3M
{USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_ITM
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
{USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
{USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
{USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
#endif
......@@ -158,7 +158,7 @@ static struct usb_device_id usbtouch_devices[] = {
* eGalax part
*/
#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
#define EGALAX_PKT_TYPE_MASK 0xFE
#define EGALAX_PKT_TYPE_REPT 0x80
......@@ -197,7 +197,7 @@ static int egalax_get_pkt_len(unsigned char *buf, int len)
/*****************************************************************************
* PanJit Part
*/
#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
......@@ -212,7 +212,7 @@ static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
/*****************************************************************************
* 3M/Microtouch Part
*/
#ifdef CONFIG_USB_TOUCHSCREEN_3M
#ifdef CONFIG_TOUCHSCREEN_USB_3M
#define MTOUCHUSB_ASYNC_REPORT 1
#define MTOUCHUSB_RESET 7
......@@ -262,7 +262,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
/*****************************************************************************
* ITM Part
*/
#ifdef CONFIG_USB_TOUCHSCREEN_ITM
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
int touch;
......@@ -296,7 +296,7 @@ static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
/*****************************************************************************
* eTurboTouch part
*/
#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
unsigned int shift;
......@@ -327,7 +327,7 @@ static int eturbo_get_pkt_len(unsigned char *buf, int len)
/*****************************************************************************
* Gunze part
*/
#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
......@@ -348,7 +348,7 @@ static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
* http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
* http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
*/
#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
/* supported data rates. currently using 130 */
#define TSC10_RATE_POINT 0x50
......@@ -419,7 +419,7 @@ static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
* the different device descriptors
*/
static struct usbtouch_device_info usbtouch_dev_info[] = {
#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
[DEVTYPE_EGALAX] = {
.min_xc = 0x0,
.max_xc = 0x07ff,
......@@ -433,7 +433,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
[DEVTYPE_PANJIT] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
......@@ -444,7 +444,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_3M
#ifdef CONFIG_TOUCHSCREEN_USB_3M
[DEVTYPE_3M] = {
.min_xc = 0x0,
.max_xc = 0x4000,
......@@ -456,7 +456,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_ITM
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
[DEVTYPE_ITM] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
......@@ -468,7 +468,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
[DEVTYPE_ETURBO] = {
.min_xc = 0x0,
.max_xc = 0x07ff,
......@@ -482,7 +482,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
[DEVTYPE_GUNZE] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
......@@ -493,7 +493,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
[DEVTYPE_DMC_TSC10] = {
.min_xc = 0x0,
.max_xc = 0x03ff,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册